Internet Engineering Task Force (IETF) R. Gellens Request for Comments: 6381 QUALCOMM, Inc. Obsoletes: 4281 D. Singer Updates: 3839, 4337, 4393 Apple, Inc. Category: Standards Track P. Frojdh ISSN: 2070-1721 Ericsson AB August 2011 The 'Codecs' and 'Profiles' Parameters for "Bucket" Media Types Abstract Several MIME type/subtype combinations exist that can contain different media formats. A receiving agent thus needs to examine the details of such media content to determine if the specific elements can be rendered given an available set of codecs. Especially when the end system has limited resources, or the connection to the end system has limited bandwidth, it is helpful to know from the Content- Type alone if the content can be rendered. This document specifies two parameters, 'codecs' and 'profiles', that are used with various MIME types or type/subtype combinations to allow for unambiguous specification of the codecs employed by the media formats contained within, or the profile(s) of the overall container format. This document obsoletes RFC 4281; RFC 4281 defines the 'codecs' parameter, which this document retains in a backwards compatible manner with minor clarifications; the 'profiles' parameter is added by this document. By labeling content with the specific codecs indicated to render the contained media, receiving systems can determine if the codecs are supported by the end system, and if not, can take appropriate action (such as rejecting the content, sending notification of the situation, transcoding the content to a supported type, fetching and installing the required codecs, further inspection to determine if it will be sufficient to support a subset of the indicated codecs, etc.). Similarly, the profiles can provide an overall indication, to the receiver, of the specifications with which the content complies. This is an indication of the compatibility of the container format and its contents to some specification. The receiver may be able to work out the extent to which it can handle and render the content by examining to see which of the declared profiles it supports, and what they mean. Gellens, et al. Standards Track [Page 1] RFC 6381 MIME Codecs and Profiles August 2011 Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 5741. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc6381. Copyright Notice Copyright (c) 2011 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Gellens, et al. Standards Track [Page 2] RFC 6381 MIME Codecs and Profiles August 2011 Table of Contents 1. Introduction ....................................................3 2. Conventions Used in This Document ...............................5 3. The 'Codecs' Parameter ..........................................5 3.1. Introduction ...............................................5 3.2. Generic Syntax .............................................7 3.3. ISO Base Media File Format Name Space ......................8 3.4. ISO-Family Syntax .........................................11 3.5. Use in Additional Media Types .............................11 3.6. Examples ..................................................12 3.7. Additional Media Feature Details ..........................12 4. The 'Profiles' Parameter .......................................12 4.1. Introduction ..............................................12 4.2. Formal Declaration ........................................13 4.3. 'Profiles' Parameter Definition ...........................14 4.4. Profiles for Files Carrying MP4RA-Registered Brands .......14 4.5. 'Profiles' Parameter BNF Definition .......................15 5. IANA Considerations ............................................15 6. Registration ...................................................15 7. Security Considerations ........................................16 8. Differences from RFC 4281 ......................................16 9. Acknowledgements ...............................................17 10. References ....................................................17 10.1. Normative References .....................................17 10.2. Informative References ...................................18 1. Introduction One of the original motivations for MIME is the ability to identify the specific media type of a message part. However, due to various factors, it is not always possible from looking at the MIME type and subtype to know which specific media formats are contained in the body part or which codecs are indicated in order to render the content. There are several media type/subtypes (either currently registered or deployed with registration pending) that contain codecs chosen from a set. In the absence of the parameters described here, it is necessary to examine each media element in order to determine the codecs or other features required to render the content. For example, video/3gpp may contain any of the video formats H.263 Profile 0, H.263 Profile 3, H.264, MPEG-4 Simple Profile, and/or any of the audio formats Adaptive Multi Rate (AMR), Adaptive Multi Rate - WideBand (AMR-WB), Extended AMR-WB, Advanced Audio Coding (AAC), or Enhanced aacPlus, as specified in [3GPP-Formats]. Gellens, et al. Standards Track [Page 3] RFC 6381 MIME Codecs and Profiles August 2011 In some cases, the specific codecs can be determined by examining the header information of the media content. While this isn't as bad as examining the entire content, it still requires specialized knowledge of each format and is resource consumptive. This ambiguity can be a problem for various clients and servers. For example, it presents a significant burden to Multimedia Messaging (MMS) servers, which must examine the media sent in each message in order to determine which codecs are required to render the content. Only then can such a server determine if the content requires transcoding or specialized handling prior to being transmitted to the handset. Additionally, it presents a challenge to smart clients on devices with constrained memory, processing power, or transmission bandwidth (such as cellular telephones and PDAs). Such clients often need to determine in advance if they are currently capable of rendering the content contained in an MMS or email message. Ambiguity: o audio/3gpp can contain AMR, AAC, AMR-WB, Extended AMR-WB, or Enhanced aacPlus contents as specified in [3GPP-Formats]. o audio/3gpp2 can contain AMR, AAC, 13K (as per [RFC3625]), Enhanced Variable Rate Codec (EVRC), Selectable Mode Vocoder (SMV), or Variable Multi Rate WideBand (VMR-WB), as specified in [3GPP2-Formats]. o video/3gpp can contain H.263 Profile 0, H.263 Profile 3, H.264, MPEG-4 Simple Profile, and/or AMR, AMR-WB, Extended AMR-WB, AAC, or Enhanced aacPlus, as specified in [3GPP-Formats]. o video/3gpp2 can contain H.263 Profile 0, H.263 Profile 3, H.264, MPEG-4 Simple Profile, and/or AMR, AAC, 13K (as per [RFC3625]), EVRC, SMV, or VMR-WB, as specified in [3GPP2-Formats]. o audio/mp4 can include any codec defined in MPEG-1, MPEG-2, MPEG-4 or registered at the MP4 registration authority [MP4RA]. o video/mp4 has the same issues as audio/mp4, and in addition many video codecs, and especially the MPEG codecs, have a variety of profiles and levels, not all of which are supported by every implementation. Gellens, et al. Standards Track [Page 4] RFC 6381 MIME Codecs and Profiles August 2011 Note that there are additional media types that are ambiguous, but are outside the scope of this document, including: o video/mpeg4-generic, which can contain anything allowed by the MPEG-4 specification, or any codec registered with the MP4 registration authority [MP4RA]; With each "bucket" type, a receiving agent only knows that it has a container format. It doesn't even know whether content that is labeled video/3gpp or video/3gpp2 contains video; it might be audio only, audio and video, or video only. A solution that permits a receiving agent to determine the specific codecs or profiles required to render media content would help provide efficient and scalable servers, especially for Multimedia Messaging (MMS), and aid the growth of multimedia services in wireless networks. 2. Conventions Used in This Document The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in "Key words for use in RFCs to Indicate Requirement Levels" [RFC2119] . The syntax in this document uses the BNF rules specified in [RFC2045] and [RFC2231]. 3. The 'Codecs' Parameter 3.1. Introduction This section adds a parameter to allow unambiguous specification of all codecs indicated to render the content in the MIME part. This parameter is optional in all current types to which it is added. Future types that contain ambiguity are strongly encouraged to include this parameter. This parameter applies to: 1. Files in the family based on the ISO Base Media File Format [ISO14496-12] called "ISO family files" in this specification. 2. The QuickTime file format, owned by Apple, Inc. This includes the media types: 1. audio/3gpp, video/3gpp [RFC3839] Gellens, et al. Standards Track [Page 5] RFC 6381 MIME Codecs and Profiles August 2011 2. audio/3gpp2, video/3gpp2 [RFC4393] 3. audio/mp4, video/mp4, application/mp4 [RFC4337] 4. video/quicktime 5. application/mp21 (see note below) Note that MPEG-21 files under the type application/mp21 may, but are not required to, contain a top-level 'moov' atom providing a timed, coded, resource. The 'codecs' parameter SHOULD only be used for MPEG-21 files when this timed material is also present in the file. Parameter name: codecs Parameter value: A single value, or a comma-separated list of values identifying the codec(s) indicated to render the content in the body part. Each value consists of one or more dot-separated elements. The name space for the first element is determined by the MIME type. The name space for each subsequent element is determined by the preceding element. The precise syntax is given below in the Generic Syntax (Section 3.2). Note that, per [RFC2045], some characters (including the comma used to separate multiple values) require that the entire parameter value be enclosed in quotes. An element MAY include an octet that [RFC2045] requires encoding. In this case, [RFC2231] is used: an asterisk ("*") is placed at the end of the parameter name (becoming 'codecs*' instead of 'codecs'), the parameter value usually starts with two single quote ("'") characters (indicating that neither character set nor language is specified), and each octet that requires encoding is represented as a percent sign ("%") followed by two hexadecimal digits. Note that, when the [RFC2231] form is used, the percent sign, asterisk, and single quote characters have special meaning and so MUST themselves be percent encoded. Examples of Generic Syntax: codecs=a.bb.ccc.d codecs="a.bb.ccc.d, e.fff" codecs*=''fo%2e codecs*="''%25%20xz, gork" Gellens, et al. Standards Track [Page 6] RFC 6381 MIME Codecs and Profiles August 2011 When the 'codecs' parameter is used, it MUST contain all codecs indicated by the content present in the body part. The 'codecs' parameter MUST NOT include any codecs that are not indicated by any media elements in the body part. In some cases, not all indicated codecs are absolutely required in order to render the content. Therefore, when a receiver does not support all listed codecs, special handling might be required. For example, the media element(s) could be examined in order to determine if an unsupported codec is actually required (e.g., there may be alternative tracks (such as English and Spanish audio), there may be timed text that can be dropped, etc.). Although the encoder MUST create parameter values that are complete and accurate in 'breadth' (that is, the encoder MUST report all four- character codes used in all tracks for ISO family files, for example) receivers MUST NOT rely on the parameter values being complete in 'depth'. (If the hierarchical rules for a given code (e.g., 'qvxy') were written after a server was implemented, for example, that server would not know what elements to place after 'qvxy'). Although a mismatch is not permitted by this specification, the body part is definitive of the actual codecs needed; the parameter supplied here is informative. If a receiver encounters a body part whose 'codecs' parameter contains codecs that are not indicated by any media elements, then the receiver SHOULD process the body part by discarding the information in the 'codecs' parameter. If a receiver encounters a body part whose 'codecs' parameter does not contain all codecs indicated by the media elements, then the receiver MAY process the body part by discarding the information in the 'codecs' parameter. 3.2. Generic Syntax The 'codecs' parameter takes either of two forms. The first form is used when the value does not contain any octets that require encoding. The second form uses [RFC2231] to allow arbitrary octets to be encoded. With either form, quotes allow for commas and other characters in (quotes MAY be used even when not required). This BNF uses the rules specified in [RFC2045] and [RFC2231]. While [RFC2231] allows specification of character set and language, this parameter does not contain items intended for human consumption, and hence makes no use of language. The language element SHOULD be Gellens, et al. Standards Track [Page 7] RFC 6381 MIME Codecs and Profiles August 2011 omitted; the character set SHOULD also be omitted. A receiver MAY ignore language and MAY choose to support only US-ASCII [RFC1345] and UTF-8 [RFC3629]. Implementations MUST NOT add comments and/or folding white space (CFWS) between the tokens except after ",". TOKEN is defined in [RFC2045], and and are defined in [RFC2231]. The BNF syntax is as follows: codecs := cod-simple / cod-fancy cod-simple := "codecs" "=" unencodedv unencodedv := id-simple / simp-list simp-list := DQUOTE id-simple *( "," id-simple ) DQUOTE id-simple := element ; "." reserved as hierarchy delimiter element := 1*octet-sim octet-sim := ; Within a 'codecs' parameter value, "." is reserved ; as a hierarchy delimiter cod-fancy := "codecs*" "=" encodedv encodedv := fancy-sing / fancy-list fancy-sing := [charset] "'" [language] "'" id-encoded ; Parsers MAY ignore ; Parsers MAY support only US-ASCII and UTF-8 fancy-list := DQUOTE [charset] "'" [language] "'" id-list DQUOTE ; Parsers MAY ignore ; Parsers MAY support only US-ASCII and UTF-8 id-list := id-encoded *( "," id-encoded ) id-encoded := encoded-elm *( "." encoded-elm ) ; "." reserved as hierarchy delimiter encoded-elm := 1*octet-fancy octet-fancy := ext-octet / attribute-char DQUOTE := %x22 ; " (double quote) Initial name space: This document only defines values for files in the ISO Base Media File Format and QuickTime families. Other file formats may also define codec naming. 3.3. ISO Base Media File Format Name Space For the ISO Base Media File Format, and the QuickTime movie file format, the first element of a 'codecs' parameter value is a sample description entry four-character code as registered by the MP4 Registration Authority [MP4RA]. Values are case sensitive. Gellens, et al. Standards Track [Page 8] RFC 6381 MIME Codecs and Profiles August 2011 Note that there are potentially multiple tracks in a file, each potentially carrying multiple sample entries (some but not all uses of the ISO Base Media File Format restrict the number of sample entries in a track to one). When the first element of a value is 'mp4a' (indicating some kind of MPEG-4 audio), or 'mp4v' (indicating some kind of MPEG-4 part-2 video), or 'mp4s' (indicating some kind of MPEG-4 Systems streams such as MPEG-4 BInary Format for Scenes (BIFS)), the second element is the hexadecimal representation of the MP4 Registration Authority ObjectTypeIndication (OTI), as specified in [MP4RA] and [MP41] (including amendments). Note that [MP4RA] uses a leading "0x" with these values, which is omitted here and hence implied. One of the OTI values for 'mp4a' is 40 (identifying MPEG-4 audio). For this value, the third element identifies the audio ObjectTypeIndication (OTI) as defined in [MP4A] (including amendments), expressed as a decimal number. For example, AAC low complexity (AAC-LC) has the value 2, so a complete string for AAC-LC would be "mp4a.40.2". One of the OTI values for 'mp4v' is 20 (identifying MPEG-4 part-2 video). For this value, the third element identifies the video ProfileLevelIndication as defined in [MP4V] (including amendments), expressed as a decimal number. For example, MPEG-4 Visual Simple Profile Level 0 has the value 9, so a complete string for MPEG-4 Visual Simple Profile Level 0 would be "mp4v.20.9". When the first element of a value is a code indicating a codec from the Advanced Video Coding specification [AVC], specifically one of the sample entries defined in [AVC-Formats] (such as 'avc1', 'avc2', 'svc1', 'mvc1', and 'mvc2') -- indicating AVC (H.264), Scalable Video Coding (SVC), or Multiview Video Coding (MVC), the second element (referred to as 'avcoti' in the formal syntax) is the hexadecimal representation of the following three bytes in the (subset) sequence parameter set Network Abstraction Layer (NAL) unit specified in [AVC]: (1) profile_idc, (2) the byte containing the constraint_set flags (currently constraint_set0_flag through constraint_set5_flag, and the reserved_zero_2bits), and (3) level_idc. Gellens, et al. Standards Track [Page 9] RFC 6381 MIME Codecs and Profiles August 2011 Note that the sample entries 'avc1' and 'avc2' do not necessarily indicate that the media only contains AVC NAL units. In fact, the media may be encoded as an SVC or MVC profile and thus contain SVC or MVC NAL units. In order to be able to determine which codec is used, further information is necessary (profile_idc). Note also that reserved_zero_2bits is required to be equal to 0 in [AVC], but other values for it may be specified in the future by ITU-T or ISO/IEC. This is as previously defined in the 3GPP File Format specification 3GPP TS 26.244 [3GPP-Formats], Section A.2.2. When SVC or MVC content is coded in an AVC-compatible fashion, the sample description may include both an AVC configuration record and an SVC or MVC configuration record. Under those circumstances, it is recommended that the two configuration records both be reported as they may contain different AVC profile, level, and compatibility indicator values. Thus, the codecs reported would include the sample description code (e.g., 'avc1') twice, with the values from one of the configuration records forming the 'avcoti' information in each. Gellens, et al. Standards Track [Page 10] RFC 6381 MIME Codecs and Profiles August 2011 3.4. ISO-Family Syntax id-simple :=/ id-iso id-encoded :=/ id-iso id-iso := iso-gen / iso-mpega / iso-mpegv / iso-avc iso-gen := cpid *( element / encoded-elm ) ; used with ; used with ; ; Note that the BNF permits "." within ; and but "." is reserved as the ; hierarchy delimiter iso-mpega := mp4a "." oti [ "." aud-oti ] iso-mpegv := mp4v "." oti [ "." vid-pli ] iso-avc := avc1 / avc2 / svc1 / mvc1 / mvc2 [ "." avcoti ] cpid := 4(octet-simple / octet-fancy) ; used with ; used with mp4a := %x6d.70.34.61 ; 'mp4a' oti := 2(DIGIT / "A" / "B" / "C" / "D" / "E" / "F") ; leading "0x" omitted avc1 := %x61.76.63.31 ; 'avc1' avc2 := %x61.76.63.32 ; 'avc2' svc1 := %x73.76.63.31 ; 'svc1' mvc1 := %x6d.76.63.31 ; 'mvc1' mvc2 := %x6d.76.63.32 ; 'mvc2' avcoti := 6(DIGIT / "A" / "B" / "C" / "D" / "E" / "F") ; leading "0x" omitted aud-oti := 1*DIGIT mp4v := %x6d.70.34.76 ; 'mp4v' vid-pli := 1*DIGIT 3.5. Use in Additional Media Types This parameter MAY be specified for use with additional MIME media types. For ISO family file formats where the name space as defined here is sufficient, all that needs to be done is to update the media type registration to specify the 'codecs' parameter with a reference to this document. For existing media types, it is generally advisable for the parameter to be optional; for new media types, the parameter MAY be optional or required, as appropriate. For ISO family file formats where the name space as defined here needs to be expanded, a new document MAY update this one by specifying the additional detail. Gellens, et al. Standards Track [Page 11] RFC 6381 MIME Codecs and Profiles August 2011 For non-ISO family file formats, a new document MAY update this one by specifying the name space for the media type(s). 3.6. Examples Content-Type: video/3gpp2; codecs="sevc, s263" (EVRC audio plus H.263 video) Content-Type: audio/3gpp; codecs=samr (AMR audio) Content-Type: video/3gpp; codecs="s263, samr" (H.263 video plus AMR audio) Content-Type: audio/3gpp2; codecs=mp4a.E1 (13K audio) Content-Type: video/3gpp2; codecs="mp4v.20.9, mp4a.E1" (MPEG-4 Visual Simple Profile Level 0 plus 13K voice) Content-Type: video/mp4; codecs="avc1.640028" (H.264/AVC video, High Profile, Level 40, e.g., DVB 720p 50Hz HDTV) Content-Type: video/mp4; codecs="svc1.56401E, avc1.4D401E" (SVC video, Scalable High Profile, Level 30, with a Main Profile AVC base layer, e.g., DVB 25 Hz SDTV) Content-Type: video/mp4; codecs="mvc1.800030, avc1.640030" (MVC video, Stereo High Profile, Level 42, with a High Profile base layer, e.g., as adopted in Blu-ray) Note: OTI value 20 ("0x20" in [MP4RA]) says "Includes associated Amendment(s) and Corrigendum(a). The actual object types are defined in [MP4V] and are conveyed in the DecoderSpecificInfo as specified in [MP4V], Annex K." (references adjusted). 3.7. Additional Media Feature Details It is sometimes helpful to provide additional details for a media element (e.g., the number of X and Y pixels, the color depth, etc.). These details are sometimes called "media features" or "media characteristics". When such additional features are included, the content-features [RFC2912] header provides a handy way to do so. 4. The 'Profiles' Parameter 4.1. Introduction Just as some codecs have a variety of profiles (subsets of their functionality within which a bitstream can be coded), some media files can also be profiled and be associated with one or more profile identifiers of the profiles to which they conform. These profiles Gellens, et al. Standards Track [Page 12] RFC 6381 MIME Codecs and Profiles August 2011 can indicate features of the file format itself, which codecs may be present, the profiles of those codecs, and so on. It can be advantageous to a receiving system to know the overall file profile(s) of a file; indeed, under these circumstances it may not be necessary to know the codecs themselves if they are implied by the profile. The 'profiles' parameter reports on the profile(s) of the overall container format. A profile of the container format may have restrictions on not only the features of the container format itself but also on what codecs may be included, and it may indeed have restrictions on the profiles of those codecs. The 'profiles' parameter does not, however, report directly any profiles of the contained media: when such codec-specific profiles are reported, this report is part of the 'codecs' parameter. The 'profiles' parameter reports only the profile(s) applying to the complete container. When the use of the 'profiles' parameter is defined for a given format, that definition SHOULD indicate that it directly reflects information in the body part, i.e., that it does not convey information beyond, or different from, what can be learnt by inspecting the body part. Although a mismatch is not permitted by this specification, the body part is definitive of the actual profiles; the parameter supplied here is informative. 4.2. Formal Declaration This section adds a parameter to allow unambiguous specification of the profiles to which a file claims conformance. This parameter is OPTIONAL in all current types to which it is added. This parameter applies to Box-structured (also known as atom- structured) files that have an initial box containing compatibility brands, as registered at the MP4 Registration Authority [MP4RA], such as a filetype or segment-type box. Principally, this includes files in the family based on the ISO Base Media File Format [ISO14496-12] and the QuickTime file format, owned by Apple, Inc. (A brand can indicate conformance with restrictions regarding which codecs and file format features are used, adherence to quantitative limits such as the length/size of the file, and so on.) This includes the media types: 1. audio/3gpp, video/3gpp [RFC3839] 2. audio/3gpp2, video/3gpp2 [RFC4393] 3. audio/mp4, video/mp4 [RFC4337] Gellens, et al. Standards Track [Page 13] RFC 6381 MIME Codecs and Profiles August 2011 4. video/quicktime 5. application/mp21 Parameter name: profiles Parameter value: A single value, or a comma-separated list of values identifying the profiles(s) to which the file claims conformance. The name space is determined by the MIME type. Note that, per [RFC2045], some characters (including the comma used to separate multiple values) require that the entire parameter value be enclosed in quotes. An element MAY include an octet that [RFC2045] requires encoding. In this case, [RFC2231] is used: an asterisk ("*") is placed at the end of the parameter name (becoming 'profiles*' instead of 'profiles'), the parameter value usually starts with two single quote ("'") characters(indicating that neither character set nor language is specified), and each octet that requires encoding is represented as a percent sign ("%") followed by two hexadecimal digits. Note that, when the [RFC2231] form is used, the percent sign, asterisk, and single quote characters have special meaning and so MUST themselves be percent encoded. Examples of Generic Syntax: profiles="isom,mp41,qvXt" profiles*="''%25%20xz, gork" 4.3. 'Profiles' Parameter Definition The 'profiles' parameter is an OPTIONAL parameter that indicates one or more profiles to which the file claims conformance. Like the 'codecs' parameter described above, it may occur as either 'profiles' or 'profiles*', with the same encoding rules. The value is, as for the 'codecs' parameter, a comma-separated list of profile identifiers. 4.4. Profiles for Files Carrying MP4RA-Registered Brands For any file format carrying a brand registered at the MP4 Registration Authority [MP4RA], notably files based on the ISO Base Media File Format ISO/IEC 14496-12 [ISO14496-12] and QuickTime movie files, the 'profiles' parameter MUST list exactly the major-brand, followed by the compatible-brands, as listed in the filetype box ('ftyp') or segment-type box ('styp'). The major-brand MUST be first, and MAY be removed from the compatible-brands list. (The file Gellens, et al. Standards Track [Page 14] RFC 6381 MIME Codecs and Profiles August 2011 format requires that it be repeated in the compatible-brands, but this requirement is relaxed here for compactness.) An example might be profiles="mp41,isom,qvXt", indicating that MPEG-4 version 1 is the major-brand and preferred use, that the file is compatible with the version of the base file format identified by 'isom', and that it is also compatible with the specification/profile 'qvXt' (whatever that may be). 4.5. 'Profiles' Parameter BNF Definition profiles := pro-simple / pro-fancy pro-simple := "profiles" "=" unencodedv pro-fancy := "profiles*" "=" encodedv 5. IANA Considerations IANA has replaced references to [RFC4281] with references to this document in the "MIME Media Types" registry, thereby indicating that the 'codecs' and/or 'profiles' parameters are optional for the following media types (as listed in Sections 3 and 4): 1. audio/3gpp, video/3gpp [RFC3839] 2. audio/3gpp2, video/3gpp2 [RFC4393] 3. audio/mp4, video/mp4, application/mp4 [RFC4337] 4. video/quicktime 5. application/mp21 6. Registration The MPEG4 Registration Authority can be consulted for the most up-to- date registration of sub-parameters for the codecs type, for specific codecs. Gellens, et al. Standards Track [Page 15] RFC 6381 MIME Codecs and Profiles August 2011 7. Security Considerations The 'codecs' parameter itself does not alter the security considerations of any of the media types with which it is used. Each audio and video media type has its own set of security considerations that continue to apply, regardless of the use of the 'codecs' parameter. An incorrect 'codecs' parameter might cause media content to be received by a device that is not capable of rendering it or might cause media content not to be sent to a device that is capable of receiving it. An incorrect 'codecs' parameter is therefore capable of some types of denial-of-service attacks. However, this is most likely to arise by accident, as an attacker capable of altering media data in transit could cause more harm by altering the media format itself, or even the content type header, rather than just the 'codecs' parameter of the content type header. To the extent that a receiver reacts to a 'codecs' parameter that indicates an unsupported codec, by fetching and installing the required codecs, such reaction needs to be performed carefully and in accord with the system's normal validity and security checks and procedures. 8. Differences from RFC 4281 1. Improved the introduction and other supporting and explanatory text; 2. improved the references; 3. clarified the MIME types to which the parameters apply, and clarified the consequent IANA actions; 4. added the 'profiles' parameter; 5. fixed an error in the BNF, where it did not correspond to either the examples or common usage; 6. added the definition of the sub-parameters for the AVC family of codecs; 7. added a security consideration for possible triggering of downloads; 8. updated acknowledgments. Gellens, et al. Standards Track [Page 16] RFC 6381 MIME Codecs and Profiles August 2011 9. Acknowledgements Harinath Garudadri provided a great deal of help, which is very much appreciated. Mary Barnes and Bruce Lilly provided detailed and helpful comments. Reviews and comments by Sam Hartman, Russ Housley, and Bert Wijnen were much appreciated. Chris Newman carefully reviewed and improved the BNF. Christian Timmerer helped with the MPEG-21 material, and Thomas Schierl and Yago Sanchez helped with SVC and MVC. 10. References 10.1. Normative References [3GPP-Formats] 3rd Generation Partnership Project, "Technical Specification Group Services and System Aspects; Transparent end-to-end packet switched streaming service (PSS); 3GPP file format (3GP)", 3GPP TS 26.244. [AVC] "Advanced video coding for generic audiovisual services", ITU-T Recommendation H.264, ISO/ IEC 14496-10:2009. [AVC-Formats] "Information technology -- Coding of audio-visual objects -- Part 15: Advanced Video Coding (AVC) file format", ISO/IEC 14496-15:2010. [ISO14496-12] "Information technology -- Coding of audio-visual objects -- Part 12: ISO base media file format", ISO/IEC 14496-12:2008. [MP4RA] "MP4REG, The MPEG-4 Registration Authority", . [RFC2045] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies", RFC 2045, November 1996. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2231] Freed, N. and K. Moore, "MIME Parameter Value and Encoded Word Extensions: Character Sets, Languages, and Continuations", RFC 2231, November 1997. Gellens, et al. Standards Track [Page 17] RFC 6381 MIME Codecs and Profiles August 2011 [RFC2912] Klyne, G., "Indicating Media Features for MIME Content", RFC 2912, September 2000. [RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO 10646", STD 63, RFC 3629, November 2003. [RFC3839] Castagno, R. and D. Singer, "MIME Type Registrations for 3rd Generation Partnership Project (3GPP) Multimedia files", RFC 3839, July 2004. [RFC4281] Gellens, R., Singer, D., and P. Frojdh, "The Codecs Parameter for "Bucket" Media Types", RFC 4281, November 2005. [RFC4337] Y Lim and D. Singer, "MIME Type Registration for MPEG-4", RFC 4337, March 2006. [RFC4393] Garudadri, H., "MIME Type Registrations for 3GPP2 Multimedia Files", RFC 4393, March 2006. 10.2. Informative References [3GPP2-Formats] Third Generation Partnership Project 2, "3GPP2 File Formats for Multimedia Service", . [MP41] "Information technology--Coding of audio-visual objects -- Part 1: Systems", ISO/IEC 14496-1:2010. [MP4A] "Information technology--Coding of audio-visual objects -- 3: Audio", ISO/IEC 14496-3:2009. [MP4V] "Information technology--Coding of audio-visual objects -- Part 2: Visual", ISO/IEC 14496-2:2004. [RFC1345] Simonsen, K., "Character Mnemonics and Character Sets", RFC 1345, June 1992. [RFC3625] Gellens, R. and H. Garudadri, "The QCP File Format and Media Types for Speech Data", RFC 3625, September 2003. Gellens, et al. Standards Track [Page 18] RFC 6381 MIME Codecs and Profiles August 2011 Authors' Addresses Randall Gellens QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121 US EMail: rg+ietf@qualcomm.com David Singer Apple, Inc. 1 Infinite Loop Cupertino, CA 95014 US Phone: +1 408 996 1010 EMail: singer@apple.com Per Frojdh Ericsson AB Ericsson Research Stockholm SE-164 80 Sweden Phone: +46 10 7190000 EMail: Per.Frojdh@ericsson.com Gellens, et al. Standards Track [Page 19]