Thu Apr 6 12:32:28 1995 Damian Cugley * pdcguide.tex: Added dtxtags to file lists and TAGS to Makefile targets. Shortened a couple of table entries by a word each so that the GPL doesn't overflow onto the next page. * maamac.dtx (\toksa): Added definition of toksa * pdcfmt2.dtx (\alphabetletter): Added missing backslash. * pdcoput5.dtx (section{Routines for balanced columns}): Removed spurious space from \makepartialpage * dtxtags: New shellscript, generates an etags-format tags file. * makefile.in (mostlyclean): Added support for dtxtags. Thu Mar 30 17:16:01 1995 Damian Cugley * Release 1.1 * makefile.in (dist): Made version.txt format prettier. * Changed all header comments to say doc/plain/pdcmac for the sake of TWG-TDS 0.61. Tue Mar 28 13:18:47 1995 Damian Cugley * pdccode.dtx: Recognizes the "locker" field of RCS id. Puts line numbers in headline. * pdcfsel.dtx: Tidied documentation. Changed \fsel_... to \FSEL... Fri Mar 24 17:08:36 1995 Damian Cugley * pinstall: Created a shellscript `pinstall' to replace `install' command on systems without GNU `install'. Trying to keep track of all the stupid variants of `install' is pointlessly difficult. * configure: uses 'pinstall' script if not gnu 'install'. * makefile.in (install): much simplified by assuming either GNU "install" or my "pinstall". Changed "mkdirhier" ro "pmkdir" at the same time. Added manpages for the three shellscripts included with the package. * pdcmisc.dtx (section{PDCIMTH}): Added version ID \message. * makefile.in: Added new target, version.txt, which is the version IDs of all the DTX files. Checked all the DTX files in to RCS (at long last). Thu Mar 16 12:52:02 1995 Damian Cugley * pdccode.dtx: notepars now allow \rightskip to shrink. * pdcfmt2.dtx: chased down some overfull hboxes * pdcsty.dtx (section{Starting up}): Changed name of pdcmasub to the more sensible pdccmsub. Tue Mar 14 12:58:09 1995 Damian Cugley * pdcadobe.dtx: Corrected definition or rbrace. Thu Mar 9 16:42:07 1995 Damian Cugley * pdcmisc.dtx (pdccmsub.dtx): new name for pdcmasub.dtx. \currency, \orda, \ordo, \florin, \brdecimal, \permille. Wed Mar 8 16:53:36 1995 Damian Cugley * pdcsty.dtx (\abstract): Stop from generating underfull hbox. * pdcadobe.dtx (\brdecimal): Removed spurious redefinition. * pdcguide.tex: Added list of file suffixes. Added pdcadobe.{dtx,tex} and pdcl1maa.{dtx,tex} to lists of files. Added PostScript title for when POstScript fonts available. Mon Mar 6 16:54:15 1995 Damian Cugley * pdcl1maa.dtx: New file * pdcsty.dtx: Chased down some overful hboxes. Fri Mar 3 18:12:02 1995 Damian Cugley * pdcfmt2.dtx (verbatim): added \ttminus, so that PostScript fonts used as typewriter fonts can change hyphens to minus signs. * pdcsty.dtx: Added use of \asyfam, etc. * pdcadobe.dtx: Tested with pdcguide and tested ISO Latin-1 support, found several bugs. Thu Mar 2 18:08:48 1995 Damian Cugley * pdcsty.dtx: Added rudimentary support for PostScript fonts. * pdcadobe.dtx: New file!! Tue Feb 28 10:17:40 1995 Damian Cugley * pdcsty.dtx: Removed attempts to make a Concrete style; there really doesn't seem to be much point. Put more of the common code in pdc{lft,doc}1.tex. * pdcguide.tex: reorganized sections, expanded user guide and installation sections. Mon Feb 27 14:43:43 1995 Damian Cugley * pdcguide.tex: Made it into a "doc" not a "lft"; expanded installation section (unfinished) * pdccode.dtx: Added summary to end of file, and some backgorund info at the start. (section{Layout}): CHanged width to 72 \tentt characters not 36 \tenrm ems. Fri Feb 24 18:55:30 1995 Damian Cugley * pdcguide.tex: Removed use of PostScript fonts -- now does a title using the circlew10 font! Thu Feb 23 16:50:33 1995 Damian Cugley * install.txt: new file * configure (INSTALL): sets INSTALL and INSTALL_DATA to "cp -p" and puts package name at end of "$docdir". * magrman.tex (\twocolgr): adjusted to use new \rigidbalance syntax * pdcoput5.dtx (section{Making a page vbox}): adjust colht by (section{Routines for balanced coumns}): \rigidpalane no longer takes an argukent for the width of the completed columns; instead one should enclose \rigidbalance in \hbox to ...{...}. Eliminated some variables (\RGDfirstcol etc.). *depth* of topbox and partialpage as well as height. * pdccode.dtx: New file, which generates tmp.tex (the Makefile checks it isn't truncated before renaming it to pdccode.tex). (section{Code sections}): added \~ for a tilde in expanded lines. Changed text width and suppressed parindent at start of sections. Copied verbatim text from pdcfmt2.dtx. Added \filelocker; this is empty if the file has been checked in. Wed Feb 22 15:46:06 1995 Damian Cugley * pdcoput5.dtx: Added section headings and brief comments on the rest of the file. Seached out overfull hboxes in the text so far. (section{Routines for balanced coumns}): Added \rigidbalancedpartialpage. Thu Feb 16 18:04:55 1995 Damian Cugley * pdcfmt2.dtx: Adjusted a little so that it now TeXs without hbox warnings. * pdccode.tex: Changed to allow ragged-right printing inside footnotes. Added \title and \author commands, and set \everycode and \evercodeline so that some common code at the start of DTX files is factored out. Wed Feb 15 15:45:30 1995 Damian Cugley * pdcsty.dtx (section{Starting up}): pdcoput->pdcoput5 * configure (cfgdate): Configuration shellscript, made by cutting down the pdctt configure script. * pdcoput5.dtx: Changed name to prevent conflict with old version of pdcoput (since the calling interface is changing). Tue Feb 14 12:20:41 1995 Damian Cugley * pdcoput.dtx (section{How to make one column}): Change to just use vertical mode material to do illustrations insteasd of separate and caption arguments. Added \topillustration and \botillustration commands. * pdcsty.dtx (section{Layout}): foomarge->foomg to match pdcoput.dtx * config.status.sh: placeholder for configuration script. Mon Feb 13 14:23:50 1995 Damian Cugley * pdcoput.dtx: New file, made from pdcoput.tex 4.1.7. Fri Feb 10 13:46:10 1995 Damian Cugley * pdcguide.tex: Added a copy of the GNU GPL to the end. * copying.tex: new file -- a formatted copy of copying.txt, which is the GNU General Public License. * *.dtx: Updated header comments to include GPL. Thu Feb 9 10:38:59 1995 Damian Cugley * pdccode2.tex: a new version of pdccode that allows multiple files to be generated. * pdcsty.dtx: replaces ma55doc.dtx, pdccm*.dtx. Uses pdccode2 to generate multiple files. Sectioning commands go in pdcdoc1.tex and pdclft1.tex. * pdcguide.tex: new file Sat Dec 3 16:26:00 1994 P. Damian Cugley (pdc@alleged) * pdccode.tex: Set the vertical margins so that files may be printed on American paper without losing any of the print. * pdcfsel.dtx: Added a title line on the first page. Removed the dependency of the code file on pdcutil.tex by adding definitions for \expcs and \noexpcs. Fri Dec 2 00:55:38 1994 P. Damian Cugley (pdc@alleged) * pdccode.tex: Changed \rcs...\end to \rcs...\endrcs for consistency with other macros that go \foo...\endfoo. * pdcfsel.dtx: Removed spurious definiton of \n. Changed \rcs...\end to \rcs...\endrcs. Changed name of \ldfont to \loadfont. Removed \setmag. Now produces pdcfsel.tex not xx.tex. * pdccode.tex: checked in with -k by pdc at 1994/12/02 00:50:24