Internet-Draft CMAF Packaging for moq-transport July 2024
Law & Curley Expires 22 January 2025 [Page]
Workgroup:
Media Over QUIC
Internet-Draft:
draft-wilaw-moq-cmafpackaging-01
Published:
Intended Status:
Informational
Expires:
Authors:
W. Law
Akamai
L. Curley

CMAF Packaging for moq-transport

Abstract

Packaging CMAF content for use with MoQ Transport [MoQTransport]

About This Document

This note is to be removed before publishing as an RFC.

The latest revision of this draft can be found at https://wilaw.github.io/moq-cmaf-packaging/draft-wilaw-moq-cmafpackaging.html. Status information for this document may be found at https://datatracker.ietf.org/doc/draft-wilaw-moq-cmafpackaging/.

Discussion of this document takes place on the Media Over QUIC Working Group mailing list (mailto:moq@ietf.org), which is archived at https://mailarchive.ietf.org/arch/browse/moq/. Subscribe at https://www.ietf.org/mailman/listinfo/moq/.

Source for this draft and an issue tracker can be found at https://github.com/wilaw/moq-cmaf-packaging.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 22 January 2025.

Table of Contents

1. Introduction

This specification defines an interoperable method of transmitting CMAF [CMAF] compliant media content over Media Over QUIC Transport (MOQT) [MoQTransport]. Multiple mappings are supported, including mapping complete Groups of Pictures (GOPS) [ISOBMFF] or individual frames to MoQTransport Objects. This specification is intended to be referenced by MOQT-compliant Streaming Formats.

2. Conventions and Definitions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119].

3. Media Object Payload

This specification defines a direct mapping between CMAF Tracks ( [CMAF] Sect 3.2.1) and MOQT tracks ([MoQTransport] Sect 2.3). As a consequence, the MOQT Object payload:

4. Mapping CMAF objects to MOQT Streams

This specification defines two methods for mapping CMAF objects to MOQT objects:

4.1. CMAF Fragment to MOQT Group

A complete CMAF Fragment (see [CMAF] sect 6.6.1) into a single Object within each group. This results in there being a single GOP (Group of Pictures) in the media object and a single media object per Group.

4.2. CMAF Chunk to MOQT Object

  • Each CMAF chunk (see [CMAF] sect 6.6.5) in a separate MOQT Object. All MOQT Objects holding chunks from the same parent fragment MUST belong to the same MOQT Group. A new MOQT Group MUST be generated for each new CMAF Fragment.

5. Switching sets

CMAF switching sets are a set of one or more CMAF tracks (3.2.1), where each track is an alternative encoding of the same source content and are constrained to enable seamless track switching (3.3.9). If such switching sets are to be transported over MOQT, irrespective of the mapping of CMAF Objects to MOQT Streams, then MOQT Group numbers MUST be media time-aligned between the MOQT tracks. Media time-aligned requires that the presentation time of the first media sample contained within the first MOQT Object of each MOQT Group is identical.

6. Initialization headers

A CMAF header is sequence of CMAF constrained ISO BMFF boxes that do not reference any media samples (3.3.15), but are associated with a CMAF track (3.2.1) and necessary for the decoding of its CMAF fragments (3.1.1). The header for a given MOQT Track may be packaged in one of two ways:

6.1. Binary objects

As a binary blob which is communicated to the client via a mechanism defined by the streaming format.

6.2. MOQT Tracks

As a MOQT Track. In this case the track MUST have only a single GROUP and a single OBJECT. The payload of the object MUST be the complete initialization header. The mapping of this initialization MOQT TRACK to the MOQT track which it initializes is defined by the streaming format.

7. Content protection and encryption

The media object payloads MAY be encrypted. If the content is encrypted then Common Encryption [CENC] MUST be used. CMAF Track encruption MUST be applied following [CENC] Section 8.2. using either CENC with 'cbcs' mode (AES 128-bit keys in Cipher-block chaining mode and pattern encruption) or 'cenc' mode (AES 128-bit keys in Counter Mode).

Any license acquisition information used to acquire CMAF decryption key(s) MUST be signalled by the Streaming Format, and not in the CMAF header.

8. Conventions and Definitions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

9. Security Considerations

TODO Security

10. IANA Considerations

This document has no IANA actions.

11. Normative References

[CENC]
"International Organization for Standardization - Information technology - MPEG systems technologies - Part 7: Common encryption in ISO base media file format files", .
[CMAF]
"Information technology -- Multimedia application format (MPEG-A) -- Part 19: Common media application format (CMAF) for segmented media", .
[ISOBMFF]
"Information technology -- Coding of audio-visual objects -- Part 12: ISO Base Media File Format", .
[MoQTransport]
Curley, L., Pugin, K., Nandakumar, S., Vasiliev, V., and I. Swett, "Media over QUIC Transport", Work in Progress, Internet-Draft, draft-ietf-moq-transport-05, , <https://datatracker.ietf.org/doc/html/draft-ietf-moq-transport-05>.
[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/rfc/rfc2119>.
[RFC8174]
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/rfc/rfc8174>.

Acknowledgments

TODO acknowledge.

Authors' Addresses

Will Law
Akamai
Luke Curley