Internet-Draft Cookies: HTTP State Management Mechanism July 2024
Bingler, et al. Expires 22 January 2025 [Page]
Workgroup:
HTTP
Internet-Draft:
draft-ietf-httpbis-rfc6265bis-15
Obsoletes:
6265 (if approved)
Published:
Intended Status:
Standards Track
Expires:
Authors:
S. Bingler, Ed.
Google LLC
M. West, Ed.
Google LLC
J. Wilander, Ed.
Apple, Inc

Cookies: HTTP State Management Mechanism

Abstract

This document defines the HTTP Cookie and Set-Cookie header fields. These header fields can be used by HTTP servers to store state (called cookies) at HTTP user agents, letting the servers maintain a stateful session over the mostly stateless HTTP protocol. Although cookies have many historical infelicities that degrade their security and privacy, the Cookie and Set-Cookie header fields are widely used on the Internet. This document obsoletes RFC 6265.

About This Document

This note is to be removed before publishing as an RFC.

Status information for this document may be found at https://datatracker.ietf.org/doc/draft-ietf-httpbis-rfc6265bis/.

Discussion of this document takes place on the HTTP Working Group mailing list (mailto:ietf-http-wg@w3.org), which is archived at https://lists.w3.org/Archives/Public/ietf-http-wg/. Working Group information can be found at https://httpwg.org/.

Source for this draft and an issue tracker can be found at https://github.com/httpwg/http-extensions/labels/6265bis.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 22 January 2025.

Table of Contents

1. Introduction

This document defines the HTTP Cookie and Set-Cookie header fields. Using the Set-Cookie header field, an HTTP server can pass name/value pairs and associated metadata (called cookies) to a user agent. When the user agent makes subsequent requests to the server, the user agent uses the metadata and other information to determine whether to return the name/value pairs in the Cookie header field.

Although simple on their surface, cookies have a number of complexities. For example, the server indicates a scope for each cookie when sending it to the user agent. The scope indicates the maximum amount of time in which the user agent should return the cookie, the servers to which the user agent should return the cookie, and the connection types for which the cookie is applicable.

For historical reasons, cookies contain a number of security and privacy infelicities. For example, a server can indicate that a given cookie is intended for "secure" connections, but the Secure attribute does not provide integrity in the presence of an active network attacker. Similarly, cookies for a given host are shared across all the ports on that host, even though the usual "same-origin policy" used by web browsers isolates content retrieved via different ports.

This specification applies to developers of both cookie-producing servers and cookie-consuming user agents. Section 3.2 helps to clarify the intended target audience for each implementation type.

To maximize interoperability with user agents, servers SHOULD limit themselves to the well-behaved profile defined in Section 4 when generating cookies.

User agents MUST implement the more liberal processing rules defined in Section 5, in order to maximize interoperability with existing servers that do not conform to the well-behaved profile defined in Section 4.

This document specifies the syntax and semantics of these header fields as they are actually used on the Internet. In particular, this document does not create new syntax or semantics beyond those in use today. The recommendations for cookie generation provided in Section 4 represent a preferred subset of current server behavior, and even the more liberal cookie processing algorithm provided in Section 5 does not recommend all of the syntactic and semantic variations in use today. Where some existing software differs from the recommended protocol in significant ways, the document contains a note explaining the difference.

This document obsoletes [RFC6265].

2. Conventions

2.1. Conformance Criteria

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].

Requirements phrased in the imperative as part of algorithms (such as "strip any leading space characters" or "return false and abort these steps") are to be interpreted with the meaning of the key word ("MUST", "SHOULD", "MAY", etc.) used in introducing the algorithm.

Conformance requirements phrased as algorithms or specific steps can be implemented in any manner, so long as the end result is equivalent. In particular, the algorithms defined in this specification are intended to be easy to understand and are not intended to be performant.

2.2. Syntax Notation

This specification uses the Augmented Backus-Naur Form (ABNF) notation of [RFC5234].

The following core rules are included by reference, as defined in [RFC5234], Appendix B.1: ALPHA (letters), CR (carriage return), CRLF (CR LF), CTLs (controls), DIGIT (decimal 0-9), DQUOTE (double quote), HEXDIG (hexadecimal 0-9/A-F/a-f), LF (line feed), NUL (null octet), OCTET (any 8-bit sequence of data except NUL), SP (space), HTAB (horizontal tab), CHAR (any [USASCII] character), VCHAR (any visible [USASCII] character), and WSP (whitespace).

The OWS (optional whitespace) and BWS (bad whitespace) rules are defined in Section 5.6.3 of [HTTP].

2.3. Terminology

The terms "user agent", "client", "server", "proxy", and "origin server" have the same meaning as in the HTTP/1.1 specification ([HTTP], Section 3).

The request-host is the name of the host, as known by the user agent, to which the user agent is sending an HTTP request or from which it is receiving an HTTP response (i.e., the name of the host to which it sent the corresponding HTTP request).

The term request-uri refers to "target URI" as defined in Section 7.1 of [HTTP].

Two sequences of octets are said to case-insensitively match each other if and only if they are equivalent under the i;ascii-casemap collation defined in [RFC4790].

The term string means a sequence of non-NUL octets.

The terms "active browsing context", "active document", "ancestor navigables", "container document", "content navigable", "dedicated worker", "Document", "inclusive ancestor navigables", "navigable", "opaque origin", "sandboxed origin browsing context flag", "shared worker", "the worker's Documents", "top-level traversable", and "WorkerGlobalScope" are defined in [HTML].

"Service Workers" are defined in the Service Workers specification [SERVICE-WORKERS].

The term "origin", the mechanism of deriving an origin from a URI, and the "the same" matching algorithm for origins are defined in [RFC6454].

"Safe" HTTP methods include GET, HEAD, OPTIONS, and TRACE, as defined in Section 9.2.1 of [HTTP].

A domain's "public suffix" is the portion of a domain that is controlled by a public registry, such as "com", "co.uk", and "pvt.k12.wy.us". A domain's "registrable domain" is the domain's public suffix plus the label to its left. That is, for https://www.site.example, the public suffix is example, and the registrable domain is site.example. Whenever possible, user agents SHOULD use an up-to-date public suffix list, such as the one maintained by the Mozilla project at [PSL].

The term "request", as well as a request's "client", "current url", "method", "target browsing context", and "url list", are defined in [FETCH].

The term "non-HTTP APIs" refers to non-HTTP mechanisms used to set and retrieve cookies, such as a web browser API that exposes cookies to scripts.

The term "top-level navigation" refers to a navigation of a top-level traversable.

3. Overview

This section outlines a way for an origin server to send state information to a user agent and for the user agent to return the state information to the origin server.

To store state, the origin server includes a Set-Cookie header field in an HTTP response. In subsequent requests, the user agent returns a Cookie request header field to the origin server. The Cookie header field contains cookies the user agent received in previous Set-Cookie header fields. The origin server is free to ignore the Cookie header field or use its contents for an application-defined purpose.

Origin servers MAY send a Set-Cookie response header field with any response. An origin server can include multiple Set-Cookie header fields in a single response. The presence of a Cookie or a Set-Cookie header field does not preclude HTTP caches from storing and reusing a response.

Origin servers SHOULD NOT fold multiple Set-Cookie header fields into a single header field. The usual mechanism for folding HTTP headers fields (i.e., as defined in Section 5.3 of [HTTP]) might change the semantics of the Set-Cookie header field because the %x2C (",") character is used by Set-Cookie in a way that conflicts with such folding.

User agents MAY ignore Set-Cookie header fields based on response status codes or the user agent's cookie policy (see Section 5.3).

3.1. Examples

Using the Set-Cookie header field, a server can send the user agent a short string in an HTTP response that the user agent will return in future HTTP requests that are within the scope of the cookie. For example, the server can send the user agent a "session identifier" named SID with the value 31d4d96e407aad42. The user agent then returns the session identifier in subsequent requests.

== Server -> User Agent ==

Set-Cookie: SID=31d4d96e407aad42

== User Agent -> Server ==

Cookie: SID=31d4d96e407aad42

The server can alter the default scope of the cookie using the Path and Domain attributes. For example, the server can instruct the user agent to return the cookie to every path and every subdomain of site.example.

== Server -> User Agent ==

Set-Cookie: SID=31d4d96e407aad42; Path=/; Domain=site.example

== User Agent -> Server ==

Cookie: SID=31d4d96e407aad42

As shown in the next example, the server can store multiple cookies at the user agent. For example, the server can store a session identifier as well as the user's preferred language by returning two Set-Cookie header fields. Notice that the server uses the Secure and HttpOnly attributes to provide additional security protections for the more sensitive session identifier (see Section 4.1.2).

== Server -> User Agent ==

Set-Cookie: SID=31d4d96e407aad42; Path=/; Secure; HttpOnly
Set-Cookie: lang=en-US; Path=/; Domain=site.example

== User Agent -> Server ==

Cookie: SID=31d4d96e407aad42; lang=en-US

Notice that the Cookie header field above contains two cookies, one named SID and one named lang. If the server wishes the user agent to persist the cookie over multiple "sessions" (e.g., user agent restarts), the server can specify an expiration date in the Expires attribute. Note that the user agent might delete the cookie before the expiration date if the user agent's cookie store exceeds its quota or if the user manually deletes the server's cookie.

== Server -> User Agent ==

Set-Cookie: lang=en-US; Expires=Wed, 09 Jun 2021 10:18:14 GMT

== User Agent -> Server ==

Cookie: SID=31d4d96e407aad42; lang=en-US

Finally, to remove a cookie, the server returns a Set-Cookie header field with an expiration date in the past. The server will be successful in removing the cookie only if the Path and the Domain attribute in the Set-Cookie header field match the values used when the cookie was created.

== Server -> User Agent ==

Set-Cookie: lang=; Expires=Sun, 06 Nov 1994 08:49:37 GMT

== User Agent -> Server ==

Cookie: SID=31d4d96e407aad42

3.2. Which Requirements to Implement

The upcoming two sections, Section 4 and Section 5, discuss the set of requirements for two distinct types of implementations. This section is meant to help guide implementers in determining which set of requirements best fits their goals. Choosing the wrong set of requirements could result in a lack of compatibility with other cookie implementations.

It's important to note that being compatible means different things depending on the implementer's goals. These differences have built up over time due to both intentional and unintentional spec changes, spec interpretations, and historical implementation differences.

This section roughly divides implementers of the cookie spec into two types, producers and consumers. These are not official terms and are only used here to help readers develop an intuitive understanding of the use cases.

4. Server Requirements

This section describes the syntax and semantics of a well-behaved profile of the Cookie and Set-Cookie header fields.

5. User Agent Requirements

This section specifies the Cookie and Set-Cookie header fields in sufficient detail that a user agent implementing these requirements precisely can interoperate with existing servers (even those that do not conform to the well-behaved profile described in Section 4).

A user agent could enforce more restrictions than those specified herein (e.g., restrictions specified by its cookie policy, described in Section 7.2). However, such additional restrictions may reduce the likelihood that a user agent will be able to interoperate with existing servers.

5.1. Subcomponent Algorithms

This section defines some algorithms used by user agents to process specific subcomponents of the Cookie and Set-Cookie header fields.

5.1.2. Canonicalized Host Names

A canonicalized host name is the string generated by the following algorithm:

  1. Convert the host name to a sequence of individual domain name labels.

  2. Convert each label that is not a Non-Reserved LDH (NR-LDH) label, to an A-label (see Section 2.3.2.1 of [RFC5890] for the former and latter), or to a "punycode label" (a label resulting from the "ToASCII" conversion in Section 4 of [RFC3490]), as appropriate (see Section 6.3 of this specification).

  3. Concatenate the resulting labels, separated by a %x2E (".") character.

5.1.3. Domain Matching

A string domain-matches a given domain string if at least one of the following conditions hold:

  • The domain string and the string are identical. (Note that both the domain string and the string will have been canonicalized to lower case at this point.)

  • All of the following conditions hold:

    • The domain string is a suffix of the string.

    • The last character of the string that is not included in the domain string is a %x2E (".") character.

    • The string is a host name (i.e., not an IP address).

5.2. "Same-site" and "cross-site" Requests

Two origins are same-site if they satisfy the "same site" criteria defined in [SAMESITE]. A request is "same-site" if the following criteria are true:

  1. The request is not the result of a reload navigation triggered through a user interface element (as defined by the user agent; e.g., a request triggered by the user clicking a refresh button on a toolbar).

  2. The request's current url's origin is same-site with the request's client's "site for cookies" (which is an origin), or if the request has no client or the request's client is null.

Requests which are the result of a reload navigation triggered through a user interface element are same-site if the reloaded document was originally navigated to via a same-site request. A request that is not "same-site" is instead "cross-site".

The request's client's "site for cookies" is calculated depending upon its client's type, as described in the following subsections:

5.2.1. Document-based requests

The URI displayed in a user agent's address bar is the only security context directly exposed to users, and therefore the only signal users can reasonably rely upon to determine whether or not they trust a particular website. The origin of that URI represents the context in which a user most likely believes themselves to be interacting. We'll define this origin, the top-level traversable's active document's origin, as the "top-level origin".

For a document displayed in a top-level traversable, we can stop here: the document's "site for cookies" is the top-level origin.

For container documents, we need to audit the origins of each of a document's ancestor navigables' active documents in order to account for the "multiple-nested scenarios" described in Section 4 of [RFC7034]. A document's "site for cookies" is the top-level origin if and only if the top-level origin is same-site with the document's origin, and with each of the document's ancestor documents' origins. Otherwise its "site for cookies" is an origin set to an opaque origin.

Given a Document (document), the following algorithm returns its "site for cookies":

  1. Let top-document be the active document in document's navigable's top-level traversable.

  2. Let top-origin be the origin of top-document's URI if top-document's sandboxed origin browsing context flag is set, and top-document's origin otherwise.

  3. Let documents be a list consisting of the active documents of document's inclusive ancestor navigables.

  4. For each item in documents:

    1. Let origin be the origin of item's URI if item's sandboxed origin browsing context flag is set, and item's origin otherwise.

    2. If origin is not same-site with top-origin, return an origin set to an opaque origin.

  5. Return top-origin.

Note: This algorithm only applies when the entire chain of documents from top-document to document are all active.

5.2.2. Worker-based requests

Worker-driven requests aren't as clear-cut as document-driven requests, as there isn't a clear link between a top-level traversable and a worker. This is especially true for Service Workers [SERVICE-WORKERS], which may execute code in the background, without any document visible at all.

Note: The descriptions below assume that workers must be same-origin with the documents that instantiate them. If this invariant changes, we'll need to take the worker's script's URI into account when determining their status.

5.2.2.1. Dedicated and Shared Workers

Dedicated workers are simple, as each dedicated worker is bound to one and only one document. Requests generated from a dedicated worker (via importScripts, XMLHttpRequest, fetch(), etc) define their "site for cookies" as that document's "site for cookies".

Shared workers may be bound to multiple documents at once. As it is quite possible for those documents to have distinct "site for cookies" values, the worker's "site for cookies" will be an origin set to an opaque origin in cases where the values are not all same-site with the worker's origin, and the worker's origin in cases where the values agree.

Given a WorkerGlobalScope (worker), the following algorithm returns its "site for cookies":

  1. Let site be worker's origin.

  2. For each document in worker's Documents:

    1. Let document-site be document's "site for cookies" (as defined in Section 5.2.1).

    2. If document-site is not same-site with site, return an origin set to an opaque origin.

  3. Return site.

5.2.2.2. Service Workers

Service Workers are more complicated, as they act as a completely separate execution context with only tangential relationship to the Document which registered them.

How user agents handle Service Workers may differ, but user agents SHOULD match the [SERVICE-WORKERS] specification.

User agents MAY ignore Set-Cookie header fields contained in responses with 100-level status codes or based on its cookie policy (see Section 7.2).

All other Set-Cookie header fields SHOULD be processed according to Section 5.6. That is, Set-Cookie header fields contained in responses with non-100-level status codes (including those in responses with 400- and 500-level status codes) SHOULD be processed unless ignored according to the user agent's cookie policy.

User agents' requirements for cookie name prefixes differ slightly from servers' (Section 4.1.3) in that UAs MUST match the prefix string case-insensitively.

The normative requirements for the prefixes are detailed in the storage model algorithm defined in Section 5.7.

This is because some servers will process cookies case-insensitively, resulting in them unintentionally miscapitalizing and accepting miscapitalized prefixes.

For example, if a server sends the following Set-Cookie header field

Set-Cookie: __SECURE-SID=12345

to a UA which checks prefixes case-sensitively it will accept this cookie and the server would incorrectly believe the cookie is subject the same guarantees as one spelled __Secure-.

Additionally the server is vulnerable to an attacker that purposefully miscapitalizes a cookie in order to impersonate a prefixed cookie. For example, a site already has a cookie __Secure-SID=12345 and by some means an attacker sends the following Set-Cookie header field for the site to a UA which checks prefixes case-sensitively.

Set-Cookie: __SeCuRe-SID=evil

The next time a user visits the site the UA will send both cookies:

Cookie: __Secure-SID=12345; __SeCuRe-SID=evil

The server, being case-insensitive, won't be able to tell the difference between the two cookies allowing the attacker to compromise the site.

To prevent these issues, UAs MUST match cookie name prefixes case-insensitive.

Note: Cookies with different names are still considered separate by UAs. So both __Secure-foo=bar and __secure-foo=baz can exist as distinct cookies simultaneously and both would have the requirements of the __Secure- prefix applied.

The following are examples of Set-Cookie header fields that would be rejected by a conformant user agent.

Set-Cookie: __Secure-SID=12345; Domain=site.example
Set-Cookie: __secure-SID=12345; Domain=site.example
Set-Cookie: __SECURE-SID=12345; Domain=site.example
Set-Cookie: __Host-SID=12345
Set-Cookie: __host-SID=12345; Secure
Set-Cookie: __host-SID=12345; Domain=site.example
Set-Cookie: __HOST-SID=12345; Domain=site.example; Path=/
Set-Cookie: __Host-SID=12345; Secure; Domain=site.example; Path=/
Set-Cookie: __host-SID=12345; Secure; Domain=site.example; Path=/
Set-Cookie: __HOST-SID=12345; Secure; Domain=site.example; Path=/

Whereas the following Set-Cookie header fields would be accepted if set from a secure origin.

Set-Cookie: __Secure-SID=12345; Domain=site.example; Secure
Set-Cookie: __secure-SID=12345; Domain=site.example; Secure
Set-Cookie: __SECURE-SID=12345; Domain=site.example; Secure
Set-Cookie: __Host-SID=12345; Secure; Path=/
Set-Cookie: __host-SID=12345; Secure; Path=/
Set-Cookie: __HOST-SID=12345; Secure; Path=/

5.7. Storage Model

The user agent stores the following fields about each cookie: name, value, expiry-time, domain, path, creation-time, last-access-time, persistent-flag, host-only-flag, secure-only-flag, http-only-flag, and same-site-flag.

When the user agent "receives a cookie" from a request-uri with name cookie-name, value cookie-value, and attributes cookie-attribute-list, the user agent MUST process the cookie as follows:

  1. A user agent MAY ignore a received cookie in its entirety. See Section 5.3.

  2. If cookie-name is empty and cookie-value is empty, abort these steps and ignore the cookie entirely.

  3. If the cookie-name or the cookie-value contains a %x00-08 / %x0A-1F / %x7F character (CTL characters excluding HTAB), abort these steps and ignore the cookie entirely.

  4. If the sum of the lengths of cookie-name and cookie-value is more than 4096 octets, abort these steps and ignore the cookie entirely.

  5. Create a new cookie with name cookie-name, value cookie-value. Set the creation-time and the last-access-time to the current date and time.

  6. If the cookie-attribute-list contains an attribute with an attribute-name of "Max-Age":

    1. Set the cookie's persistent-flag to true.

    2. Set the cookie's expiry-time to attribute-value of the last attribute in the cookie-attribute-list with an attribute-name of "Max-Age".

    Otherwise, if the cookie-attribute-list contains an attribute with an attribute-name of "Expires" (and does not contain an attribute with an attribute-name of "Max-Age"):

    1. Set the cookie's persistent-flag to true.

    2. Set the cookie's expiry-time to attribute-value of the last attribute in the cookie-attribute-list with an attribute-name of "Expires".

    Otherwise:

    1. Set the cookie's persistent-flag to false.

    2. Set the cookie's expiry-time to the latest representable date.

  7. If the cookie-attribute-list contains an attribute with an attribute-name of "Domain":

    1. Let the domain-attribute be the attribute-value of the last attribute in the cookie-attribute-list with both an attribute-name of "Domain" and an attribute-value whose length is no more than 1024 octets. (Note that a leading %x2E ("."), if present, is ignored even though that character is not permitted.)

    Otherwise:

    1. Let the domain-attribute be the empty string.

  8. If the domain-attribute contains a character that is not in the range of [USASCII] characters, abort these steps and ignore the cookie entirely.

  9. If the user agent is configured to reject "public suffixes" and the domain-attribute is a public suffix:

    1. If the domain-attribute is identical to the canonicalized request-host:

      1. Let the domain-attribute be the empty string.

      Otherwise:

      1. Abort these steps and ignore the cookie entirely.

    NOTE: This step prevents attacker.example from disrupting the integrity of site.example by setting a cookie with a Domain attribute of "example".

  10. If the domain-attribute is non-empty:

    1. If the canonicalized request-host does not domain-match the domain-attribute:

      1. Abort these steps and ignore the cookie entirely.

      Otherwise:

      1. Set the cookie's host-only-flag to false.

      2. Set the cookie's domain to the domain-attribute.

    Otherwise:

    1. Set the cookie's host-only-flag to true.

    2. Set the cookie's domain to the canonicalized request-host.

  11. If the cookie-attribute-list contains an attribute with an attribute-name of "Path", set the cookie's path to attribute-value of the last attribute in the cookie-attribute-list with both an attribute-name of "Path" and an attribute-value whose length is no more than 1024 octets. Otherwise, set the cookie's path to the default-path of the request-uri.

  12. If the cookie-attribute-list contains an attribute with an attribute-name of "Secure", set the cookie's secure-only-flag to true. Otherwise, set the cookie's secure-only-flag to false.

  13. If the request-uri does not denote a "secure" connection (as defined by the user agent), and the cookie's secure-only-flag is true, then abort these steps and ignore the cookie entirely.

  14. If the cookie-attribute-list contains an attribute with an attribute-name of "HttpOnly", set the cookie's http-only-flag to true. Otherwise, set the cookie's http-only-flag to false.

  15. If the cookie was received from a "non-HTTP" API and the cookie's http-only-flag is true, abort these steps and ignore the cookie entirely.

  16. If the cookie's secure-only-flag is false, and the request-uri does not denote a "secure" connection, then abort these steps and ignore the cookie entirely if the cookie store contains one or more cookies that meet all of the following criteria:

    1. Their name matches the name of the newly-created cookie.

    2. Their secure-only-flag is true.

    3. Their domain domain-matches the domain of the newly-created cookie, or vice-versa.

    4. The path of the newly-created cookie path-matches the path of the existing cookie.

    Note: The path comparison is not symmetric, ensuring only that a newly-created, non-secure cookie does not overlay an existing secure cookie, providing some mitigation against cookie-fixing attacks. That is, given an existing secure cookie named 'a' with a path of '/login', a non-secure cookie named 'a' could be set for a path of '/' or '/foo', but not for a path of '/login' or '/login/en'.

  17. If the cookie-attribute-list contains an attribute with an attribute-name of "SameSite", and an attribute-value of "Strict", "Lax", or "None", set the cookie's same-site-flag to the attribute-value of the last attribute in the cookie-attribute-list with an attribute-name of "SameSite". Otherwise, set the cookie's same-site-flag to "Default".

  18. If the cookie's same-site-flag is not "None":

    1. If the cookie was received from a "non-HTTP" API, and the API was called from a navigable's active document whose "site for cookies" is not same-site with the top-level origin, then abort these steps and ignore the newly created cookie entirely.

    2. If the cookie was received from a "same-site" request (as defined in Section 5.2), skip the remaining substeps and continue processing the cookie.

    3. If the cookie was received from a request which is navigating a top-level traversable [HTML] (e.g. if the request's "reserved client" is either null or an environment whose "target browsing context"'s navigable is a top-level traversable), skip the remaining substeps and continue processing the cookie.

      Note: Top-level navigations can create a cookie with any SameSite value, even if the new cookie wouldn't have been sent along with the request had it already existed prior to the navigation.

    4. Abort these steps and ignore the newly created cookie entirely.

  19. If the cookie's "same-site-flag" is "None", abort these steps and ignore the cookie entirely unless the cookie's secure-only-flag is true.

  20. If the cookie-name begins with a case-insensitive match for the string "__Secure-", abort these steps and ignore the cookie entirely unless the cookie's secure-only-flag is true.

  21. If the cookie-name begins with a case-insensitive match for the string "__Host-", abort these steps and ignore the cookie entirely unless the cookie meets all the following criteria:

    1. The cookie's secure-only-flag is true.

    2. The cookie's host-only-flag is true.

    3. The cookie-attribute-list contains an attribute with an attribute-name of "Path", and the cookie's path is /.

  22. If the cookie-name is empty and either of the following conditions are true, abort these steps and ignore the cookie entirely:

    • the cookie-value begins with a case-insensitive match for the string "__Secure-"

    • the cookie-value begins with a case-insensitive match for the string "__Host-"

  23. If the cookie store contains a cookie with the same name, domain, host-only-flag, and path as the newly-created cookie:

    1. Let old-cookie be the existing cookie with the same name, domain, host-only-flag, and path as the newly-created cookie. (Notice that this algorithm maintains the invariant that there is at most one such cookie.)

    2. If the newly-created cookie was received from a "non-HTTP" API and the old-cookie's http-only-flag is true, abort these steps and ignore the newly created cookie entirely.

    3. Update the creation-time of the newly-created cookie to match the creation-time of the old-cookie.

    4. Remove the old-cookie from the cookie store.

  24. Insert the newly-created cookie into the cookie store.

A cookie is "expired" if the cookie has an expiry date in the past.

The user agent MUST evict all expired cookies from the cookie store if, at any time, an expired cookie exists in the cookie store.

At any time, the user agent MAY "remove excess cookies" from the cookie store if the number of cookies sharing a domain field exceeds some implementation-defined upper bound (such as 50 cookies).

At any time, the user agent MAY "remove excess cookies" from the cookie store if the cookie store exceeds some predetermined upper bound (such as 3000 cookies).

When the user agent removes excess cookies from the cookie store, the user agent MUST evict cookies in the following priority order:

  1. Expired cookies.

  2. Cookies whose secure-only-flag is false, and which share a domain field with more than a predetermined number of other cookies.

  3. Cookies that share a domain field with more than a predetermined number of other cookies.

  4. All cookies.

If two cookies have the same removal priority, the user agent MUST evict the cookie with the earliest last-access-time first.

When "the current session is over" (as defined by the user agent), the user agent MUST remove from the cookie store all cookies with the persistent-flag set to false.

5.8. Retrieval Model

This section defines how cookies are retrieved from a cookie store in the form of a cookie-string. A "retrieval" is any event which requires generating a cookie-string. For example, a retrieval may occur in order to build a Cookie header field for an HTTP request, or may be required in order to return a cookie-string from a call to a "non-HTTP" API that provides access to cookies. A retrieval has an associated URI, same-site status, and type, which are defined below depending on the type of retrieval.

5.8.2. Non-HTTP APIs

The user agent MAY implement "non-HTTP" APIs that can be used to access stored cookies.

A user agent MAY return an empty cookie-string in certain contexts, such as when a retrieval occurs within a third-party context (see Section 7.1).

If a user agent does return cookies for a given call to a "non-HTTP" API with an associated Document, then the user agent MUST compute the cookie-string following the algorithm defined in Section 5.8.3, where the retrieval's URI is defined by the caller (see [DOM-DOCUMENT-COOKIE]), the retrieval's same-site status is "same-site" if the Document's "site for cookies" is same-site with the top-level origin as defined in Section 5.2.1 (otherwise it is "cross-site"), and the retrieval's type is "non-HTTP".

5.8.3. Retrieval Algorithm

Given a cookie store and a retrieval, the following algorithm returns a cookie-string from a given cookie store.

  1. Let cookie-list be the set of cookies from the cookie store that meets all of the following requirements:

    • Either:

      • The cookie's host-only-flag is true and the canonicalized host of the retrieval's URI is identical to the cookie's domain.

      Or:

      • The cookie's host-only-flag is false and the canonicalized host of the retrieval's URI domain-matches the cookie's domain.

      NOTE: (For user agents configured to reject "public suffixes") It's possible that the public suffix list was changed since a cookie was created. If this change results in a cookie's domain becoming a public suffix then that cookie is considered invalid as it would have been rejected during creation (See Section 5.7 step 9). User agents should be careful to avoid retrieving these invalid cookies even if they domain-match the host of the retrieval's URI.

    • The retrieval's URI's path path-matches the cookie's path.

    • If the cookie's secure-only-flag is true, then the retrieval's URI must denote a "secure" connection (as defined by the user agent).

      NOTE: The notion of a "secure" connection is not defined by this document. Typically, user agents consider a connection secure if the connection makes use of transport-layer security, such as SSL or TLS, or if the host is trusted. For example, most user agents consider "https" to be a scheme that denotes a secure protocol and "localhost" to be trusted host.

    • If the cookie's http-only-flag is true, then exclude the cookie if the retrieval's type is "non-HTTP".

    • If the cookie's same-site-flag is not "None" and the retrieval's same-site status is "cross-site", then exclude the cookie unless all of the following conditions are met:

      • The retrieval's type is "HTTP".

      • The same-site-flag is "Lax" or "Default".

      • The HTTP request associated with the retrieval uses a "safe" method.

      • The target browsing context of the HTTP request associated with the retrieval is the active browsing context or a top-level traversable.

  2. The user agent SHOULD sort the cookie-list in the following order:

    • Cookies with longer paths are listed before cookies with shorter paths.

    • Among cookies that have equal-length path fields, cookies with earlier creation-times are listed before cookies with later creation-times.

    NOTE: Not all user agents sort the cookie-list in this order, but this order reflects common practice when this document was written, and, historically, there have been servers that (erroneously) depended on this order.

  3. Update the last-access-time of each cookie in the cookie-list to the current date and time.

  4. Serialize the cookie-list into a cookie-string by processing each cookie in the cookie-list in order:

    1. If the cookies' name is not empty, output the cookie's name followed by the %x3D ("=") character.

    2. If the cookies' value is not empty, output the cookie's value.

    3. If there is an unprocessed cookie in the cookie-list, output the characters %x3B and %x20 ("; ").

6. Implementation Considerations

6.1. Limits

Practical user agent implementations have limits on the number and size of cookies that they can store. General-use user agents SHOULD provide each of the following minimum capabilities:

  • At least 50 cookies per domain.

  • At least 3000 cookies total.

User agents MAY limit the maximum number of cookies they store, and may evict any cookie at any time (whether at the request of the user or due to implementation limitations).

Note that a limit on the maximum number of cookies also limits the total size of the stored cookies, due to the length limits which MUST be enforced in Section 5.6.

Servers SHOULD use as few and as small cookies as possible to avoid reaching these implementation limits, minimize network bandwidth due to the Cookie header field being included in every request, and to avoid reaching server header field limits (See Section 4.2.1).

Servers SHOULD gracefully degrade if the user agent fails to return one or more cookies in the Cookie header field because the user agent might evict any cookie at any time.

6.2. Application Programming Interfaces

One reason the Cookie and Set-Cookie header fields use such esoteric syntax is that many platforms (both in servers and user agents) provide a string-based application programming interface (API) to cookies, requiring application-layer programmers to generate and parse the syntax used by the Cookie and Set-Cookie header fields, which many programmers have done incorrectly, resulting in interoperability problems.

Instead of providing string-based APIs to cookies, platforms would be well-served by providing more semantic APIs. It is beyond the scope of this document to recommend specific API designs, but there are clear benefits to accepting an abstract "Date" object instead of a serialized date string.

6.3. IDNA Dependency and Migration

IDNA2008 [RFC5890] supersedes IDNA2003 [RFC3490]. However, there are differences between the two specifications, and thus there can be differences in processing (e.g., converting) domain name labels that have been registered under one from those registered under the other. There will be a transition period of some time during which IDNA2003-based domain name labels will exist in the wild. User agents SHOULD implement IDNA2008 [RFC5890] and MAY implement [UTS46] or [RFC5895] in order to facilitate their IDNA transition. If a user agent does not implement IDNA2008, the user agent MUST implement IDNA2003 [RFC3490].

7. Privacy Considerations

Cookies' primary privacy risk is their ability to correlate user activity. This can happen on a single site, but is most problematic when activity is tracked across different, seemingly unconnected Web sites to build a user profile.

Over time, this capability (warned against explicitly in [RFC2109] and all of its successors) has become widely used for varied reasons including:

While not every use of cookies is necessarily problematic for privacy, their potential for abuse has become a widespread concern in the Internet community and broader society. In response to these concerns, user agents have actively constrained cookie functionality in various ways (as allowed and encouraged by previous specifications), while avoiding disruption to features they judge desirable for the health of the Web.

It is too early to declare consensus on which specific mechanism(s) should be used to mitigate cookies' privacy impact; user agents' ongoing changes to how they are handled are best characterised as experiments that can provide input into that eventual consensus.

Instead, this document describes limited, general mitigations against the privacy risks associated with cookies that enjoy wide deployment at the time of writing. It is expected that implementations will continue to experiment and impose stricter, more well-defined limitations on cookies over time. Future versions of this document might codify those mechanisms based upon deployment experience. If functions that currently rely on cookies can be supported by separate, targeted mechanisms, they might be documented in separate specifications and stricter limitations on cookies might become feasible.

Note that cookies are not the only mechanism that can be used to track users across sites, so while these mitigations are necessary to improve Web privacy, they are not sufficient on their own.

7.1. Third-Party Cookies

A "third-party" or cross-site cookie is one that is associated with embedded content (such as scripts, images, stylesheets, frames) that is obtained from a different server than the one that hosts the primary resource (usually, the Web page that the user is viewing). Third-party cookies are often used to correlate users' activity on different sites.

Because of their inherent privacy issues, most user agents now limit third-party cookies in a variety of ways. Some completely block third-party cookies by refusing to process third-party Set-Cookie header fields and refusing to send third-party Cookie header fields. Some partition cookies based upon the first-party context, so that different cookies are sent depending on the site being browsed. Some block cookies based upon user agent cookie policy and/or user controls.

While this document does not endorse or require a specific approach, it is RECOMMENDED that user agents adopt a policy for third-party cookies that is as restrictive as compatibility constraints permit. Consequently, resources cannot rely upon third-party cookies being treated consistently by user agents for the foreseeable future.

7.3. User Controls

User agents SHOULD provide users with a mechanism for managing the cookies stored in the cookie store. For example, a user agent might let users delete all cookies received during a specified time period or all the cookies related to a particular domain. In addition, many user agents include a user interface element that lets users examine the cookies stored in their cookie store.

User agents SHOULD provide users with a mechanism for disabling cookies. When cookies are disabled, the user agent MUST NOT include a Cookie header field in outbound HTTP requests and the user agent MUST NOT process Set-Cookie header fields in inbound HTTP responses.

User agents MAY offer a way to change the cookie policy (see Section 7.2).

User agents MAY provide users the option of preventing persistent storage of cookies across sessions. When configured thusly, user agents MUST treat all received cookies as if the persistent-flag were set to false. Some popular user agents expose this functionality via "private browsing" mode [Aggarwal2010].

7.4. Expiration Dates

Although servers can set the expiration date for cookies to the distant future, most user agents do not actually retain cookies for multiple decades. Rather than choosing gratuitously long expiration periods, servers SHOULD promote user privacy by selecting reasonable cookie expiration periods based on the purpose of the cookie. For example, a typical session identifier might reasonably be set to expire in two weeks.

8. Security Considerations

8.1. Overview

Cookies have a number of security pitfalls. This section overviews a few of the more salient issues.

In particular, cookies encourage developers to rely on ambient authority for authentication, often becoming vulnerable to attacks such as cross-site request forgery [CSRF]. Also, when storing session identifiers in cookies, developers often create session fixation vulnerabilities.

Transport-layer encryption, such as that employed in HTTPS, is insufficient to prevent a network attacker from obtaining or altering a victim's cookies because the cookie protocol itself has various vulnerabilities (see "Weak Confidentiality" and "Weak Integrity", below). In addition, by default, cookies do not provide confidentiality or integrity from network attackers, even when used in conjunction with HTTPS.

8.2. Ambient Authority

A server that uses cookies to authenticate users can suffer security vulnerabilities because some user agents let remote parties issue HTTP requests from the user agent (e.g., via HTTP redirects or HTML forms). When issuing those requests, user agents attach cookies even if the remote party does not know the contents of the cookies, potentially letting the remote party exercise authority at an unwary server.

Although this security concern goes by a number of names (e.g., cross-site request forgery, confused deputy), the issue stems from cookies being a form of ambient authority. Cookies encourage server operators to separate designation (in the form of URLs) from authorization (in the form of cookies). Consequently, the user agent might supply the authorization for a resource designated by the attacker, possibly causing the server or its clients to undertake actions designated by the attacker as though they were authorized by the user.

Instead of using cookies for authorization, server operators might wish to consider entangling designation and authorization by treating URLs as capabilities. Instead of storing secrets in cookies, this approach stores secrets in URLs, requiring the remote entity to supply the secret itself. Although this approach is not a panacea, judicious application of these principles can lead to more robust security.

8.3. Clear Text

Unless sent over a secure channel (such as TLS), the information in the Cookie and Set-Cookie header fields is transmitted in the clear.

  1. All sensitive information conveyed in these header fields is exposed to an eavesdropper.

  2. A malicious intermediary could alter the header fields as they travel in either direction, with unpredictable results.

  3. A malicious client could alter the Cookie header fields before transmission, with unpredictable results.

Servers SHOULD encrypt and sign the contents of cookies (using whatever format the server desires) when transmitting them to the user agent (even when sending the cookies over a secure channel). However, encrypting and signing cookie contents does not prevent an attacker from transplanting a cookie from one user agent to another or from replaying the cookie at a later time.

In addition to encrypting and signing the contents of every cookie, servers that require a higher level of security SHOULD use the Cookie and Set-Cookie header fields only over a secure channel. When using cookies over a secure channel, servers SHOULD set the Secure attribute (see Section 4.1.2.5) for every cookie. If a server does not set the Secure attribute, the protection provided by the secure channel will be largely moot.

For example, consider a webmail server that stores a session identifier in a cookie and is typically accessed over HTTPS. If the server does not set the Secure attribute on its cookies, an active network attacker can intercept any outbound HTTP request from the user agent and redirect that request to the webmail server over HTTP. Even if the webmail server is not listening for HTTP connections, the user agent will still include cookies in the request. The active network attacker can intercept these cookies, replay them against the server, and learn the contents of the user's email. If, instead, the server had set the Secure attribute on its cookies, the user agent would not have included the cookies in the clear-text request.

8.4. Session Identifiers

Instead of storing session information directly in a cookie (where it might be exposed to or replayed by an attacker), servers commonly store a nonce (or "session identifier") in a cookie. When the server receives an HTTP request with a nonce, the server can look up state information associated with the cookie using the nonce as a key.

Using session identifier cookies limits the damage an attacker can cause if the attacker learns the contents of a cookie because the nonce is useful only for interacting with the server (unlike non-nonce cookie content, which might itself be sensitive). Furthermore, using a single nonce prevents an attacker from "splicing" together cookie content from two interactions with the server, which could cause the server to behave unexpectedly.

Using session identifiers is not without risk. For example, the server SHOULD take care to avoid "session fixation" vulnerabilities. A session fixation attack proceeds in three steps. First, the attacker transplants a session identifier from his or her user agent to the victim's user agent. Second, the victim uses that session identifier to interact with the server, possibly imbuing the session identifier with the user's credentials or confidential information. Third, the attacker uses the session identifier to interact with server directly, possibly obtaining the user's authority or confidential information.

8.5. Weak Confidentiality

Cookies do not provide isolation by port. If a cookie is readable by a service running on one port, the cookie is also readable by a service running on another port of the same server. If a cookie is writable by a service on one port, the cookie is also writable by a service running on another port of the same server. For this reason, servers SHOULD NOT both run mutually distrusting services on different ports of the same host and use cookies to store security-sensitive information.

Cookies do not provide isolation by scheme. Although most commonly used with the http and https schemes, the cookies for a given host might also be available to other schemes, such as ftp and gopher. Although this lack of isolation by scheme is most apparent in non-HTTP APIs that permit access to cookies (e.g., HTML's document.cookie API), the lack of isolation by scheme is actually present in requirements for processing cookies themselves (e.g., consider retrieving a URI with the gopher scheme via HTTP).

Cookies do not always provide isolation by path. Although the network-level protocol does not send cookies stored for one path to another, some user agents expose cookies via non-HTTP APIs, such as HTML's document.cookie API. Because some of these user agents (e.g., web browsers) do not isolate resources received from different paths, a resource retrieved from one path might be able to access cookies stored for another path.

8.6. Weak Integrity

Cookies do not provide integrity guarantees for sibling domains (and their subdomains). For example, consider foo.site.example and bar.site.example. The foo.site.example server can set a cookie with a Domain attribute of "site.example" (possibly overwriting an existing "site.example" cookie set by bar.site.example), and the user agent will include that cookie in HTTP requests to bar.site.example. In the worst case, bar.site.example will be unable to distinguish this cookie from a cookie it set itself. The foo.site.example server might be able to leverage this ability to mount an attack against bar.site.example.

Even though the Set-Cookie header field supports the Path attribute, the Path attribute does not provide any integrity protection because the user agent will accept an arbitrary Path attribute in a Set-Cookie header field. For example, an HTTP response to a request for http://site.example/foo/bar can set a cookie with a Path attribute of "/qux". Consequently, servers SHOULD NOT both run mutually distrusting services on different paths of the same host and use cookies to store security-sensitive information.

An active network attacker can also inject cookies into the Cookie header field sent to https://site.example/ by impersonating a response from http://site.example/ and injecting a Set-Cookie header field. The HTTPS server at site.example will be unable to distinguish these cookies from cookies that it set itself in an HTTPS response. An active network attacker might be able to leverage this ability to mount an attack against site.example even if site.example uses HTTPS exclusively.

Servers can partially mitigate these attacks by encrypting and signing the contents of their cookies, or by naming the cookie with the __Secure- prefix. However, using cryptography does not mitigate the issue completely because an attacker can replay a cookie he or she received from the authentic site.example server in the user's session, with unpredictable results.

Finally, an attacker might be able to force the user agent to delete cookies by storing a large number of cookies. Once the user agent reaches its storage limit, the user agent will be forced to evict some cookies. Servers SHOULD NOT rely upon user agents retaining cookies.

8.7. Reliance on DNS

Cookies rely upon the Domain Name System (DNS) for security. If the DNS is partially or fully compromised, the cookie protocol might fail to provide the security properties required by applications.

8.8. SameSite Cookies

8.8.1. Defense in depth

"SameSite" cookies offer a robust defense against CSRF attack when deployed in strict mode, and when supported by the client. It is, however, prudent to ensure that this designation is not the extent of a site's defense against CSRF, as same-site navigations and submissions can certainly be executed in conjunction with other attack vectors such as cross-site scripting or abuse of page redirections.

Understanding how and when a request is considered same-site is also important in order to properly design a site for SameSite cookies. For example, if a cross-site top-level request is made to a sensitive page that request will be considered cross-site and SameSite=Strict cookies won’t be sent; that page’s sub-resources requests, however, are same-site and would receive SameSite=Strict cookies. Sites can avoid inadvertently allowing access to these sub-resources by returning an error for the initial page request if it doesn’t include the appropriate cookies.

Developers are strongly encouraged to deploy the usual server-side defenses (CSRF tokens, ensuring that "safe" HTTP methods are idempotent, etc) to mitigate the risk more fully.

Additionally, client-side techniques such as those described in [app-isolation] may also prove effective against CSRF, and are certainly worth exploring in combination with "SameSite" cookies.

8.8.2. Top-level Navigations

Setting the SameSite attribute in "strict" mode provides robust defense in depth against CSRF attacks, but has the potential to confuse users unless sites' developers carefully ensure that their cookie-based session management systems deal reasonably well with top-level navigations.

Consider the scenario in which a user reads their email at MegaCorp Inc's webmail provider https://site.example/. They might expect that clicking on an emailed link to https://projects.example/secret/project would show them the secret project that they're authorized to see, but if https://projects.example has marked their session cookies as SameSite=Strict, then this cross-site navigation won't send them along with the request. https://projects.example will render a 404 error to avoid leaking secret information, and the user will be quite confused.

Developers can avoid this confusion by adopting a session management system that relies on not one, but two cookies: one conceptually granting "read" access, another granting "write" access. The latter could be marked as SameSite=Strict, and its absence would prompt a reauthentication step before executing any non-idempotent action. The former could be marked as SameSite=Lax, in order to allow users access to data via top-level navigation, or SameSite=None, to permit access in all contexts (including cross-site embedded contexts).

8.8.3. Mashups and Widgets

The Lax and Strict values for the SameSite attribute are inappropriate for some important use-cases. In particular, note that content intended for embedding in cross-site contexts (social networking widgets or commenting services, for instance) will not have access to same-site cookies. Cookies which are required in these situations should be marked with SameSite=None to allow access in cross-site contexts.

Likewise, some forms of Single-Sign-On might require cookie-based authentication in a cross-site context; these mechanisms will not function as intended with same-site cookies and will also require SameSite=None.

8.8.4. Server-controlled

SameSite cookies in and of themselves don't do anything to address the general privacy concerns outlined in Section 7.1 of [RFC6265]. The "SameSite" attribute is set by the server, and serves to mitigate the risk of certain kinds of attacks that the server is worried about. The user is not involved in this decision. Moreover, a number of side-channels exist which could allow a server to link distinct requests even in the absence of cookies (for example, connection and/or socket pooling between same-site and cross-site requests).

8.8.5. Reload navigations

Requests issued for reloads triggered through user interface elements (such as a refresh button on a toolbar) are same-site only if the reloaded document was originally navigated to via a same-site request. This differs from the handling of other reload navigations, which are always same-site if top-level, since the source navigable's active document is precisely the document being reloaded.

This special handling of reloads triggered through a user interface element avoids sending SameSite cookies on user-initiated reloads if they were withheld on the original navigation (i.e., if the initial navigation were cross-site). If the reload navigation were instead considered same-site, and sent all the initially withheld SameSite cookies, the security benefits of withholding the cookies in the first place would be nullified. This is especially important given that the absence of SameSite cookies withheld on a cross-site navigation request may lead to visible site breakage, prompting the user to trigger a reload.

For example, suppose the user clicks on a link from https://attacker.example/ to https://victim.example/. This is a cross-site request, so SameSite=Strict cookies are withheld. Suppose this causes https://victim.example/ to appear broken, because the site only displays its sensitive content if a particular SameSite cookie is present in the request. The user, frustrated by the unexpectedly broken site, presses refresh on their browser's toolbar. To now consider the reload request same-site and send the initially withheld SameSite cookie would defeat the purpose of withholding it in the first place, as the reload navigation triggered through the user interface may replay the original (potentially malicious) request. Thus, the reload request should be considered cross-site, like the request that initially navigated to the page.

Because requests issued for, non-user initiated, reloads attach all SameSite cookies, developers should be careful and thoughtful about when to initiate a reload in order to avoid a CSRF attack. For example, the page could only initiate a reload if a CSRF token is present on the initial request.

8.8.6. Top-level requests with "unsafe" methods

The "Lax" enforcement mode described in Section 5.6.7.1 allows a cookie to be sent with a cross-site HTTP request if and only if it is a top-level navigation with a "safe" HTTP method. Implementation experience shows that this is difficult to apply as the default behavior, as some sites may rely on cookies not explicitly specifying a SameSite attribute being included on top-level cross-site requests with "unsafe" HTTP methods (as was the case prior to the introduction of the SameSite attribute).

For example, the concluding step of a login flow may involve a cross-site top-level POST request to an endpoint; this endpoint expects a recently created cookie containing transactional state information, necessary to securely complete the login. For such a cookie, "Lax" enforcement is not appropriate, as it would cause the cookie to be excluded due to the unsafe HTTP request method, resulting in an unrecoverable failure of the whole login flow.

The "Lax-allowing-unsafe" enforcement mode described in Section 5.6.7.2 retains some of the protections of "Lax" enforcement (as compared to "None") while still allowing recently created cookies to be sent cross-site with unsafe top-level requests.

As a more permissive variant of "Lax" mode, "Lax-allowing-unsafe" mode necessarily provides fewer protections against CSRF. Ultimately, the provision of such an enforcement mode should be seen as a temporary, transitional measure to ease adoption of "Lax" enforcement by default.

9. IANA Considerations

10. References

10.1. Normative References

WHATWG, "HTML - Living Standard", , <https://html.spec.whatwg.org/#dom-document-cookie>.
[FETCH]
van Kesteren, A., "Fetch", n.d., <https://fetch.spec.whatwg.org/>.
[HTML]
Hickson, I., Pieters, S., van Kesteren, A., Jägenstedt, P., and D. Denicola, "HTML", n.d., <https://html.spec.whatwg.org/>.
[HTTP]
Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke, Ed., "HTTP Semantics", STD 97, RFC 9110, DOI 10.17487/RFC9110, , <https://www.rfc-editor.org/rfc/rfc9110>.
[RFC1034]
Mockapetris, P., "Domain names - concepts and facilities", STD 13, RFC 1034, DOI 10.17487/RFC1034, , <https://www.rfc-editor.org/rfc/rfc1034>.
[RFC1123]
Braden, R., Ed., "Requirements for Internet Hosts - Application and Support", STD 3, RFC 1123, DOI 10.17487/RFC1123, , <https://www.rfc-editor.org/rfc/rfc1123>.
[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/rfc/rfc2119>.
[RFC3490]
Costello, A., "Internationalizing Domain Names in Applications (IDNA)", RFC 3490, , <https://www.rfc-editor.org/rfc/rfc3490>. See Section 6.3 for an explanation why the normative reference to an obsoleted specification is needed.
[RFC4790]
Newman, C., Duerst, M., and A. Gulbrandsen, "Internet Application Protocol Collation Registry", RFC 4790, DOI 10.17487/RFC4790, , <https://www.rfc-editor.org/rfc/rfc4790>.
[RFC5234]
Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, DOI 10.17487/RFC5234, , <https://www.rfc-editor.org/rfc/rfc5234>.
[RFC5890]
Klensin, J., "Internationalized Domain Names for Applications (IDNA): Definitions and Document Framework", RFC 5890, DOI 10.17487/RFC5890, , <https://www.rfc-editor.org/rfc/rfc5890>.
[RFC6454]
Barth, A., "The Web Origin Concept", RFC 6454, DOI 10.17487/RFC6454, , <https://www.rfc-editor.org/rfc/rfc6454>.
[RFC8126]
Cotton, M., Leiba, B., and T. Narten, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 8126, DOI 10.17487/RFC8126, , <https://www.rfc-editor.org/rfc/rfc8126>.
[SAMESITE]
WHATWG, "HTML - Living Standard", , <https://html.spec.whatwg.org/#same-site>.
[SERVICE-WORKERS]
Russell, A., Song, J., and J. Archibald, "Service Workers", n.d., <http://www.w3.org/TR/service-workers/>.
[USASCII]
American National Standards Institute, "Coded Character Set -- 7-bit American Standard Code for Information Interchange", ANSI X3.4, .

10.2. Informative References

[Aggarwal2010]
Aggarwal, G., Burzstein, E., Jackson, C., and D. Boneh, "An Analysis of Private Browsing Modes in Modern Browsers", , <http://www.usenix.org/events/sec10/tech/full_papers/Aggarwal.pdf>.
[app-isolation]
Chen, E., Bau, J., Reis, C., Barth, A., and C. Jackson, "App Isolation - Get the Security of Multiple Browsers with Just One", , <http://www.collinjackson.com/research/papers/appisolation.pdf>.
[CSRF]
Barth, A., Jackson, C., and J. Mitchell, "Robust Defenses for Cross-Site Request Forgery", DOI 10.1145/1455770.1455782, ISBN 978-1-59593-810-7, ACM CCS '08: Proceedings of the 15th ACM conference on Computer and communications security (pages 75-88), , <http://portal.acm.org/citation.cfm?id=1455770.1455782>.
[HttpFieldNameRegistry]
"Hypertext Transfer Protocol (HTTP) Field Name Registry", n.d., <https://www.iana.org/assignments/http-fields/>.
West, M., "Deprecate modification of 'secure' cookies from non-secure origins", Work in Progress, Internet-Draft, draft-ietf-httpbis-cookie-alone-01, , <https://datatracker.ietf.org/doc/html/draft-ietf-httpbis-cookie-alone-01>.
West, M., "Cookie Prefixes", Work in Progress, Internet-Draft, draft-ietf-httpbis-cookie-prefixes-00, , <https://datatracker.ietf.org/doc/html/draft-ietf-httpbis-cookie-prefixes-00>.
West, M. and M. Goodwin, "Same-Site Cookies", Work in Progress, Internet-Draft, draft-ietf-httpbis-cookie-same-site-00, , <https://datatracker.ietf.org/doc/html/draft-ietf-httpbis-cookie-same-site-00>.
[prerendering]
Bentzel, C., "Chrome Prerendering", n.d., <https://www.chromium.org/developers/design-documents/prerender>.
[PSL]
"Public Suffix List", n.d., <https://publicsuffix.org/list/>.
[RFC2109]
Kristol, D. and L. Montulli, "HTTP State Management Mechanism", RFC 2109, DOI 10.17487/RFC2109, , <https://www.rfc-editor.org/rfc/rfc2109>.
[RFC2818]
Rescorla, E., "HTTP Over TLS", RFC 2818, DOI 10.17487/RFC2818, , <https://www.rfc-editor.org/rfc/rfc2818>.
[RFC3986]
Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, , <https://www.rfc-editor.org/rfc/rfc3986>.
[RFC4648]
Josefsson, S., "The Base16, Base32, and Base64 Data Encodings", RFC 4648, DOI 10.17487/RFC4648, , <https://www.rfc-editor.org/rfc/rfc4648>.
[RFC5895]
Resnick, P. and P. Hoffman, "Mapping Characters for Internationalized Domain Names in Applications (IDNA) 2008", RFC 5895, DOI 10.17487/RFC5895, , <https://www.rfc-editor.org/rfc/rfc5895>.
[RFC6265]
Barth, A., "HTTP State Management Mechanism", RFC 6265, DOI 10.17487/RFC6265, , <https://www.rfc-editor.org/rfc/rfc6265>.
[RFC7034]
Ross, D. and T. Gondrom, "HTTP Header Field X-Frame-Options", RFC 7034, DOI 10.17487/RFC7034, , <https://www.rfc-editor.org/rfc/rfc7034>.
[RFC9113]
Thomson, M., Ed. and C. Benfield, Ed., "HTTP/2", RFC 9113, DOI 10.17487/RFC9113, , <https://www.rfc-editor.org/rfc/rfc9113>.
[RFC9114]
Bishop, M., Ed., "HTTP/3", RFC 9114, DOI 10.17487/RFC9114, , <https://www.rfc-editor.org/rfc/rfc9114>.
[UTS46]
Davis, M. and M. Suignard, "Unicode IDNA Compatibility Processing", UNICODE Unicode Technical Standards # 46, , <http://unicode.org/reports/tr46/>.

Appendix A. Changes from RFC 6265

Acknowledgements

RFC 6265 was written by Adam Barth. This document is an update of RFC 6265, adding features and aligning the specification with the reality of today’s deployments. Here, we’re standing upon the shoulders of a giant since the majority of the text is still Adam’s.

Thank you to both Lily Chen and Steven Englehardt, editors emeritus, for their significant contributions improving this draft.

Authors' Addresses

Steven Bingler (editor)
Google LLC
Mike West (editor)
Google LLC
John Wilander (editor)
Apple, Inc