patch-2.3.99-pre7 linux/drivers/net/pcmcia/3c574_cs.c
Next file: linux/drivers/net/pcmcia/3c589_cs.c
Previous file: linux/drivers/net/ni65.c
Back to the patch index
Back to the overall index
- Lines: 284
- Date:
Mon May 8 21:26:05 2000
- Orig file:
v2.3.99-pre6/linux/drivers/net/pcmcia/3c574_cs.c
- Orig date:
Tue Mar 14 19:10:39 2000
diff -u --recursive --new-file v2.3.99-pre6/linux/drivers/net/pcmcia/3c574_cs.c linux/drivers/net/pcmcia/3c574_cs.c
@@ -205,7 +205,6 @@
u_short media_status;
u_short fast_poll;
u_long last_irq;
- spinlock_t lock;
};
/* Set iff a MII transceiver on any interface requires mdio preamble.
@@ -245,9 +244,9 @@
static struct net_device_stats *el3_get_stats(struct net_device *dev);
static int el3_rx(struct net_device *dev, int worklimit);
static int el3_close(struct net_device *dev);
+static void el3_tx_timeout(struct net_device *dev);
static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static void set_rx_mode(struct net_device *dev);
-static void el3_tx_timeout(struct net_device *dev);
static dev_info_t dev_info = "3c574_cs";
@@ -277,16 +276,6 @@
}
/*
- We never need to do anything when a tc574 device is "initialized"
- by the net software, because we only register already-found cards.
-*/
-
-static int tc574_init(struct net_device *dev)
-{
- return 0;
-}
-
-/*
tc574_attach() creates an "instance" of the driver, allocating
local data structures for one device. The device is registered
with Card Services.
@@ -307,8 +296,6 @@
lp = kmalloc(sizeof(*lp), GFP_KERNEL);
if (!lp) return NULL;
memset(lp, 0, sizeof(*lp));
-
- lp->lock = SPIN_LOCK_UNLOCKED;
link = &lp->link; dev = &lp->dev;
link->priv = dev->priv = link->irq.Instance = lp;
@@ -336,15 +323,11 @@
dev->do_ioctl = &el3_ioctl;
dev->set_multicast_list = &set_rx_mode;
ether_setup(dev);
- dev->name = lp->node.dev_name;
- dev->init = &tc574_init;
dev->open = &el3_open;
dev->stop = &el3_close;
dev->tx_timeout = el3_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
- netif_start_queue (dev);
-
/* Register with Card Services */
link->next = dev_list;
dev_list = link;
@@ -380,7 +363,6 @@
{
struct el3_private *lp = link->priv;
dev_link_t **linkp;
- long flags;
DEBUG(0, "3c574_detach(0x%p)\n", link);
@@ -390,13 +372,7 @@
if (*linkp == NULL)
return;
- spin_lock_irqsave(&lp->lock, flags);
- if (link->state & DEV_RELEASE_PENDING) {
- del_timer(&link->release);
- link->state &= ~DEV_RELEASE_PENDING;
- }
- spin_unlock_irqrestore(&lp->lock, flags);
-
+ del_timer(&link->release);
if (link->state & DEV_CONFIG) {
tc574_release((u_long)link);
if (link->state & DEV_STALE_CONFIG) {
@@ -472,16 +448,15 @@
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
- netif_start_queue (dev);
if (register_netdev(dev) != 0) {
printk(KERN_NOTICE "3c574_cs: register_netdev() failed\n");
goto failed;
}
- link->state &= ~DEV_CONFIG_PENDING;
-
ioaddr = dev->base_addr;
+ strcpy(lp->node.dev_name, dev->name);
link->dev = &lp->node;
+ link->state &= ~DEV_CONFIG_PENDING;
/* The 3c574 normally uses an EEPROM for configuration info, including
the hardware address. The future products may include a modem chip
@@ -603,7 +578,7 @@
CardServices(ReleaseIO, link->handle, &link->io);
CardServices(ReleaseIRQ, link->handle, &link->irq);
- link->state &= ~(DEV_CONFIG | DEV_RELEASE_PENDING);
+ link->state &= ~DEV_CONFIG;
} /* tc574_release */
@@ -628,8 +603,7 @@
link->state &= ~DEV_PRESENT;
if (link->state & DEV_CONFIG) {
netif_device_detach(dev);
- link->release.expires = jiffies + HZ/20;
- add_timer(&link->release);
+ mod_timer(&link->release, jiffies + HZ/20);
}
break;
case CS_EVENT_CARD_INSERTION:
@@ -643,7 +617,6 @@
if (link->state & DEV_CONFIG) {
if (link->open)
netif_device_detach(dev);
-
CardServices(ReleaseConfiguration, link->handle);
}
break;
@@ -860,7 +833,7 @@
link->open++;
MOD_INC_USE_COUNT;
- netif_start_queue (dev);
+ netif_start_queue(dev);
tc574_reset(dev);
lp->media.function = &media_check;
@@ -886,7 +859,7 @@
/* Issue TX_RESET and TX_START commands. */
wait_for_completion(dev, TxReset);
outw(TxEnable, ioaddr + EL3_CMD);
- netif_start_queue (dev);
+ netif_start_queue(dev);
}
static void pop_tx_status(struct net_device *dev)
@@ -928,12 +901,12 @@
/* TxFree appears only in Window 1, not offset 0x1c. */
if (inw(ioaddr + TxFree) <= 1536) {
- netif_stop_queue (dev);
+ netif_stop_queue(dev);
/* Interrupt us when the FIFO has room for max-sized packet.
The threshold is in units of dwords. */
outw(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
}
-
+
dev_kfree_skb (skb);
pop_tx_status(dev);
@@ -948,11 +921,8 @@
ioaddr_t ioaddr, status;
int work_budget = max_interrupt_work;
- if (!netif_device_present(dev))
+ if (!netif_device_present(dev))
return;
-
- spin_lock (&lp->lock);
-
ioaddr = dev->base_addr;
DEBUG(3, "%s: interrupt, status %4.4x.\n",
@@ -960,8 +930,8 @@
while ((status = inw(ioaddr + EL3_STATUS)) &
(IntLatch | RxComplete | RxEarly | StatsFull)) {
-
- if (!netif_device_present(dev) || ((status & 0xe000) != 0x2000)) {
+ if (!netif_device_present(dev) ||
+ ((status & 0xe000) != 0x2000)) {
DEBUG(1, "%s: Interrupt from dead card\n", dev->name);
break;
}
@@ -973,7 +943,7 @@
DEBUG(3, " TX room bit was handled.\n");
/* There's room in the FIFO for a full-sized packet. */
outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
- netif_wake_queue (dev);
+ netif_wake_queue(dev);
}
if (status & TxComplete)
@@ -1022,8 +992,7 @@
DEBUG(3, "%s: exiting interrupt, status %4.4x.\n",
dev->name, inw(ioaddr + EL3_STATUS));
-
- spin_unlock (&lp->lock);
+ return;
}
/*
@@ -1038,8 +1007,8 @@
ioaddr_t ioaddr = dev->base_addr;
u_long flags;
u_short /* cable, */ media, partner;
-
- if (!netif_device_present(dev))
+
+ if (!netif_device_present(dev))
goto reschedule;
/* Check for pending interrupt with expired latency timer: with
@@ -1123,7 +1092,7 @@
{
struct el3_private *lp = (struct el3_private *)dev->priv;
ioaddr_t ioaddr = dev->base_addr;
- u8 upper_cnt;
+ u8 rx, tx, up;
DEBUG(2, "%s: updating the statistics.\n", dev->name);
@@ -1140,22 +1109,19 @@
lp->stats.tx_window_errors += inb(ioaddr + 4);
lp->stats.rx_fifo_errors += inb(ioaddr + 5);
lp->stats.tx_packets += inb(ioaddr + 6);
- upper_cnt = inb(ioaddr + 9);
- lp->stats.tx_packets += (upper_cnt&0x30) << 4;
- /* Rx packets */ inb(ioaddr + 7);
- /* Tx deferrals */ inb(ioaddr + 8);
- lp->stats.rx_bytes += inw(ioaddr + 10);
- lp->stats.tx_bytes += inw(ioaddr + 12);
+ up = inb(ioaddr + 9);
+ lp->stats.tx_packets += (up&0x30) << 4;
+ /* Rx packets */ inb(ioaddr + 7);
+ /* Tx deferrals */ inb(ioaddr + 8);
+ rx = inw(ioaddr + 10);
+ tx = inw(ioaddr + 12);
- /* With Vortex and later we must also clear the BadSSD counter. */
EL3WINDOW(4);
- inb(ioaddr + 12);
+ /* BadSSD */ inb(ioaddr + 12);
+ up = inb(ioaddr + 13);
- {
- u8 up = inb(ioaddr + 13);
- lp->stats.rx_bytes += (up & 0x0f) << 16;
- lp->stats.tx_bytes += (up & 0xf0) << 12;
- }
+ lp->stats.rx_bytes += rx + ((up & 0x0f) << 16);
+ lp->stats.tx_bytes += tx + ((up & 0xf0) << 12);
EL3WINDOW(1);
}
@@ -1290,8 +1256,6 @@
DEBUG(2, "%s: shutting down ethercard.\n", dev->name);
- netif_stop_queue (dev);
-
if (DEV_OK(link)) {
/* Turn off statistics ASAP. We update lp->stats below. */
outw(StatsDisable, ioaddr + EL3_CMD);
@@ -1307,12 +1271,10 @@
}
link->open--;
+ netif_stop_queue(dev);
del_timer(&lp->media);
- if (link->state & DEV_STALE_CONFIG) {
- link->release.expires = jiffies + HZ/20;
- link->state |= DEV_RELEASE_PENDING;
- add_timer(&link->release);
- }
+ if (link->state & DEV_STALE_CONFIG)
+ mod_timer(&link->release, jiffies + HZ/20);
MOD_DEC_USE_COUNT;
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)