patch-2.3.47 linux/drivers/net/skfp/h/sba_def.h
Next file: linux/drivers/net/skfp/h/skfbi.h
Previous file: linux/drivers/net/skfp/h/sba.h
Back to the patch index
Back to the overall index
- Lines: 77
- Date:
Fri Feb 18 14:55:53 2000
- Orig file:
v2.3.46/linux/drivers/net/skfp/h/sba_def.h
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.3.46/linux/drivers/net/skfp/h/sba_def.h linux/drivers/net/skfp/h/sba_def.h
@@ -0,0 +1,76 @@
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#define PHYS 0 /* physical addr */
+#define PERM_ADDR 0x80 /* permanet address */
+#define SB_STATIC 0x00000001
+#define MAX_PAYLOAD 1562
+#define PRIMARY_RING 0x00000001
+#ifndef NULL
+#define NULL 0x00
+#endif
+
+/*********************** SB_Input Variable Values ***********************/
+/* may be needed when ever the SBA state machine is called */
+
+#define UNKNOWN_SYNC_SOURCE 0x0001
+#define REQ_ALLOCATION 0x0002
+#define REPORT_RESP 0x0003
+#define CHANGE_RESP 0x0004
+#define TNEG 0x0005
+#define NIF 0x0006
+#define SB_STOP 0x0007
+#define SB_START 0x0008
+#define REPORT_TIMER 0x0009
+#define CHANGE_REQUIRED 0x000A
+
+#define DEFAULT_OV 50
+
+#ifdef SBA
+/**************************** SBA STATES *****************************/
+
+#define SBA_STANDBY 0x00000000
+#define SBA_ACTIVE 0x00000001
+#define SBA_RECOVERY 0x00000002
+#define SBA_REPORT 0x00000003
+#define SBA_CHANGE 0x00000004
+
+/**************************** OTHERS *********************************/
+
+#define FIFTY_PERCENT 50 /* bytes per second */
+#define MAX_SESSIONS 150
+#define TWO_MINUTES 13079 /* 9.175 ms/tick */
+#define FIFTY_BYTES 50
+#define SBA_DENIED 0x0000000D
+#define I_NEED_ONE 0x00000000
+#define MAX_NODES 50
+/*#define T_REPORT 0x59682F00L*/ /* 120s/80ns in Hex */
+#define TWO_MIN 120 /* seconds */
+#define SBA_ST_UNKNOWN 0x00000002
+#define SBA_ST_ACTIVE 0x00000001
+#define S_CLEAR 0x00000000L
+#define ZERO 0x00000000
+#define FULL 0x00000000 /* old: 0xFFFFFFFFF */
+#define S_SET 0x00000001L
+#define LOW_PRIO 0x02 /* ??????? */
+#define OK 0x01 /* ??????? */
+#define NOT_OK 0x00 /* ??????? */
+
+/****************************************/
+/* deallocate_status[ni][si] values */
+/****************************************/
+#define TX_CHANGE 0X00000001L
+#define PENDING 0x00000002L
+#define NONE 0X00000000L
+#endif
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)