patch-2.3.23 linux/drivers/net/pcmcia/wavelan_cs.h
Next file: linux/drivers/net/pcmcia/xirc2ps_cs.c
Previous file: linux/drivers/net/pcmcia/wavelan_cs.c
Back to the patch index
Back to the overall index
- Lines: 774
- Date:
Wed Oct 20 21:33:12 1999
- Orig file:
v2.3.22/linux/drivers/net/pcmcia/wavelan_cs.h
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.3.22/linux/drivers/net/pcmcia/wavelan_cs.h linux/drivers/net/pcmcia/wavelan_cs.h
@@ -0,0 +1,773 @@
+/*
+ * Wavelan Pcmcia driver
+ *
+ * Jean II - HPLB '96
+ *
+ * Reorganisation and extension of the driver.
+ *
+ * This file contain all definition and declarations necessary for the
+ * wavelan pcmcia driver. This file is a private header, so it should
+ * be included only on wavelan_cs.c !!!
+ */
+
+#ifndef WAVELAN_CS_H
+#define WAVELAN_CS_H
+
+/************************** DOCUMENTATION **************************/
+/*
+ * This driver provide a Linux interface to the Wavelan Pcmcia hardware
+ * The Wavelan is a product of Lucent (http://www.wavelan.com/).
+ * This division was formerly part of NCR and then AT&T.
+ * Wavelan are also distributed by DEC (RoamAbout DS)...
+ *
+ * To know how to use this driver, read the PCMCIA HOWTO.
+ * If you want to exploit the many other fonctionalities, look comments
+ * in the code...
+ *
+ * This driver is the result of the effort of many peoples (see below).
+ */
+
+/* ------------------------ SPECIFIC NOTES ------------------------ */
+/*
+ * Web page
+ * --------
+ * I try to maintain a web page with the Wireless LAN Howto at :
+ * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
+ *
+ * Debugging and options
+ * ---------------------
+ * You will find below a set of '#define" allowing a very fine control
+ * on the driver behaviour and the debug messages printed.
+ * The main options are :
+ * o WAVELAN_ROAMING, for the experimental roaming support.
+ * o SET_PSA_CRC, to have your card correctly recognised by
+ * an access point and the Point-to-Point diagnostic tool.
+ * o USE_PSA_CONFIG, to read configuration from the PSA (EEprom)
+ * (otherwise we always start afresh with some defaults)
+ *
+ * wavelan_cs.o is darn too big
+ * -------------------------
+ * That's true ! There is a very simple way to reduce the driver
+ * object by 33% (yes !). Comment out the following line :
+ * #include <linux/wireless.h>
+ * Other compile options can also reduce the size of it...
+ *
+ * MAC address and hardware detection :
+ * ----------------------------------
+ * The detection code of the wavelan chech that the first 3
+ * octets of the MAC address fit the company code. This type of
+ * detection work well for AT&T cards (because the AT&T code is
+ * hardcoded in wavelan.h), but of course will fail for other
+ * manufacturer.
+ *
+ * If you are sure that your card is derived from the wavelan,
+ * here is the way to configure it :
+ * 1) Get your MAC address
+ * a) With your card utilities (wfreqsel, instconf, ...)
+ * b) With the driver :
+ * o compile the kernel with DEBUG_CONFIG_INFO enabled
+ * o Boot and look the card messages
+ * 2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan.h)
+ * 3) Compile & verify
+ * 4) Send me the MAC code - I will include it in the next version...
+ *
+ */
+
+/* --------------------- WIRELESS EXTENSIONS --------------------- */
+/*
+ * This driver is the first one to support "wireless extensions".
+ * This set of extensions provide you some way to control the wireless
+ * caracteristics of the hardware in a standard way and support for
+ * applications for taking advantage of it (like Mobile IP).
+ *
+ * You will need to enable the CONFIG_NET_RADIO define in the kernel
+ * configuration to enable the wireless extensions (this is the one
+ * giving access to the radio network device choice).
+ *
+ * It might also be a good idea as well to fetch the wireless tools to
+ * configure the device and play a bit.
+ */
+
+/* ---------------------------- FILES ---------------------------- */
+/*
+ * wavelan_cs.c : The actual code for the driver - C functions
+ *
+ * wavelan_cs.h : Private header : local types / vars for the driver
+ *
+ * wavelan.h : Description of the hardware interface & structs
+ *
+ * i82593.h : Description if the Ethernet controler
+ */
+
+/* --------------------------- HISTORY --------------------------- */
+/*
+ * The history of the Wavelan drivers is as complicated as history of
+ * the Wavelan itself (NCR -> AT&T -> Lucent).
+ *
+ * All started with Anders Klemets <klemets@paul.rutgers.edu>,
+ * writting a Wavelan ISA driver for the MACH microkernel. Girish
+ * Welling <welling@paul.rutgers.edu> had also worked on it.
+ * Keith Moore modify this for the Pcmcia hardware.
+ *
+ * Robert Morris <rtm@das.harvard.edu> port these two drivers to BSDI
+ * and add specific Pcmcia support (there is currently no equivalent
+ * of the PCMCIA package under BSD...).
+ *
+ * Jim Binkley <jrb@cs.pdx.edu> port both BSDI drivers to FreeBSD.
+ *
+ * Bruce Janson <bruce@cs.usyd.edu.au> port the BSDI ISA driver to Linux.
+ *
+ * Anthony D. Joseph <adj@lcs.mit.edu> started modify Bruce driver
+ * (with help of the BSDI PCMCIA driver) for PCMCIA.
+ * Yunzhou Li <yunzhou@strat.iol.unh.edu> finished is work.
+ * Joe Finney <joe@comp.lancs.ac.uk> patched the driver to start
+ * correctly 2.00 cards (2.4 GHz with frequency selection).
+ * David Hinds <dhinds@hyper.stanford.edu> integrated the whole in his
+ * Pcmcia package (+ bug corrections).
+ *
+ * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some
+ * patchs to the Pcmcia driver. After, I added code in the ISA driver
+ * for Wireless Extensions and full support of frequency selection
+ * cards. Now, I'm doing the same to the Pcmcia driver + some
+ * reorganisation.
+ * Loeke Brederveld <lbrederv@wavelan.com> from Lucent has given me
+ * much needed informations on the Wavelan hardware.
+ */
+
+/* By the way : for the copyright & legal stuff :
+ * Almost everybody wrote code under GNU or BSD license (or alike),
+ * and want that their original copyright remain somewhere in the
+ * code (for myself, I go with the GPL).
+ * Nobody want to take responsibility for anything, except the fame...
+ */
+
+/* --------------------------- CREDITS --------------------------- */
+/*
+ * Credits:
+ * Special thanks to Jan Hoogendoorn of AT&T GIS Utrecht and
+ * Loeke Brederveld of Lucent for providing extremely useful
+ * information about WaveLAN PCMCIA hardware
+ *
+ * This driver is based upon several other drivers, in particular:
+ * David Hinds' Linux driver for the PCMCIA 3c589 ethernet adapter
+ * Bruce Janson's Linux driver for the AT-bus WaveLAN adapter
+ * Anders Klemets' PCMCIA WaveLAN adapter driver
+ * Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter
+ *
+ * Additional Credits:
+ *
+ * This software was originally developed under Linux 1.2.3
+ * (Slackware 2.0 distribution).
+ * And then under Linux 2.0.x (Debian 1.1 - pcmcia 2.8.18-23) with
+ * HP OmniBook 4000 & 5500.
+ *
+ * It is based on other device drivers and information either written
+ * or supplied by:
+ * James Ashton (jaa101@syseng.anu.edu.au),
+ * Ajay Bakre (bakre@paul.rutgers.edu),
+ * Donald Becker (becker@super.org),
+ * Jim Binkley <jrb@cs.pdx.edu>,
+ * Loeke Brederveld <lbrederv@wavelan.com>,
+ * Allan Creighton (allanc@cs.su.oz.au),
+ * Brent Elphick <belphick@uwaterloo.ca>,
+ * Joe Finney <joe@comp.lancs.ac.uk>,
+ * Matthew Geier (matthew@cs.su.oz.au),
+ * Remo di Giovanni (remo@cs.su.oz.au),
+ * Mark Hagan (mhagan@wtcpost.daytonoh.NCR.COM),
+ * David Hinds <dhinds@hyper.stanford.edu>,
+ * Jan Hoogendoorn (c/o marteijn@lucent.com),
+ * Bruce Janson <bruce@cs.usyd.edu.au>,
+ * Anthony D. Joseph <adj@lcs.mit.edu>,
+ * Anders Klemets (klemets@paul.rutgers.edu),
+ * Yunzhou Li <yunzhou@strat.iol.unh.edu>,
+ * Marc Meertens (mmeertens@lucent.com),
+ * Keith Moore,
+ * Robert Morris (rtm@das.harvard.edu),
+ * Ian Parkin (ian@cs.su.oz.au),
+ * John Rosenberg (johnr@cs.su.oz.au),
+ * George Rossi (george@phm.gov.au),
+ * Arthur Scott (arthur@cs.su.oz.au),
+ * Stanislav Sinyagin <stas@isf.ru>
+ * Peter Storey,
+ * Jean Tourrilhes <jt@hpl.hp.com>,
+ * Girish Welling (welling@paul.rutgers.edu)
+ * Clark Woodworth <clark@hiway1.exit109.com>
+ * Yongguang Zhang <ygz@isl.hrl.hac.com>...
+ */
+
+/* ------------------------- IMPROVEMENTS ------------------------- */
+/*
+ * I proudly present :
+ *
+ * Changes made in 2.8.22 :
+ * ----------------------
+ * - improved wv_set_multicast_list
+ * - catch spurious interrupt
+ * - correct release of the device
+ *
+ * Changes mades in release :
+ * ------------------------
+ * - Reorganisation of the code, function name change
+ * - Creation of private header (wavelan_cs.h)
+ * - Reorganised debug messages
+ * - More comments, history, ...
+ * - Configure earlier (in "insert" instead of "open")
+ * and do things only once
+ * - mmc_init : configure the PSA if not done
+ * - mmc_init : 2.00 detection better code for 2.00 init
+ * - better info at startup
+ * - Correct a HUGE bug (volatile & uncalibrated busy loop)
+ * in wv_82593_cmd => config speedup
+ * - Stop receiving & power down on close (and power up on open)
+ * use "ifconfig down" & "ifconfig up ; route add -net ..."
+ * - Send packets : add watchdog instead of pooling
+ * - Receive : check frame wrap around & try to recover some frames
+ * - wavelan_set_multicast_list : avoid reset
+ * - add wireless extensions (ioctl & get_wireless_stats)
+ * get/set nwid/frequency on fly, info for /proc/net/wireless
+ * - Supress useless stuff from lp (net_local), but add link
+ * - More inlines
+ * - Lot of others minor details & cleanups
+ *
+ * Changes made in second release :
+ * ------------------------------
+ * - Optimise wv_85893_reconfig stuff, fix potential problems
+ * - Change error values for ioctl
+ * - Non blocking wv_ru_stop() + call wv_reset() in case of problems
+ * - Remove development printk from wavelan_watchdog()
+ * - Remove of the watchdog to wavelan_close instead of wavelan_release
+ * fix potential problems...
+ * - Start debugging suspend stuff (but it's still a bit weird)
+ * - Debug & optimize dump header/packet in Rx & Tx (debug)
+ * - Use "readb" and "writeb" to be kernel 2.1 compliant
+ * - Better handling of bogus interrupts
+ * - Wireless extension : SETSPY and GETSPY
+ * - Remove old stuff (stats - for those needing it, just ask me...)
+ * - Make wireless extensions optional
+ *
+ * Changes made in third release :
+ * -----------------------------
+ * - cleanups & typos
+ * - modif wireless ext (spy -> only one pointer)
+ * - new private ioctl to set/get quality & level threshold
+ * - Init : correct default value of level threshold for pcmcia
+ * - kill watchdog in hw_reset
+ * - more 2.1 support (copy_to/from_user instead of memcpy_to/fromfs)
+ * - Add message level (debug stuff in /var/adm/debug & errors not
+ * displayed at console and still in /var/adm/messages)
+ *
+ * Changes made in fourth release :
+ * ------------------------------
+ * - multicast support (yes !) thanks to Yongguang Zhang.
+ *
+ * Changes made in fifth release (2.9.0) :
+ * -------------------------------------
+ * - Revisited multicast code (it was mostly wrong).
+ * - protect code in wv_82593_reconfig with dev->tbusy (oups !)
+ *
+ * Changes made in sixth release (2.9.1a) :
+ * --------------------------------------
+ * - Change the detection code for multi manufacturer code support
+ * - Correct bug (hang kernel) in init when we were "rejecting" a card
+ *
+ * Changes made in seventh release (2.9.1b) :
+ * ----------------------------------------
+ * - Update to wireless extensions changes
+ * - Silly bug in card initial configuration (psa_conf_status)
+ *
+ * Changes made in eigth release :
+ * -----------------------------
+ * - Small bug in debug code (probably not the last one...)
+ * - 1.2.13 support (thanks to Clark Woodworth)
+ *
+ * Changes made for release in 2.9.2b :
+ * ----------------------------------
+ * - Level threshold is now a standard wireless extension (version 4 !)
+ * - modules parameters types for kernel > 2.1.17
+ * - updated man page
+ * - Others cleanup from David Hinds
+ *
+ * Changes made for release in 2.9.5 :
+ * ---------------------------------
+ * - byte count stats (courtesy of David Hinds)
+ * - Remove dev_tint stuff (courtesy of David Hinds)
+ * - Others cleanup from David Hinds
+ * - Encryption setting from Brent Elphick (thanks a lot !)
+ * - 'base' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin)
+ *
+ * Changes made for release in 2.9.6 :
+ * ---------------------------------
+ * - fix bug : no longuer disable watchdog in case of bogus interrupt
+ * - increase timeout in config code for picky hardware
+ * - mask unused bits in status (Wireless Extensions)
+ *
+ * Changes integrated by Justin Seger <jseger@MIT.EDU> & David Hinds :
+ * -----------------------------------------------------------------
+ * - Roaming "hack" from Joe Finney <joe@comp.lancs.ac.uk>
+ * - PSA CRC code from Bob Gray <rgray@bald.cs.dartmouth.edu>
+ * - Better initialisation of the i82593 controller
+ * from Joseph K. O'Sullivan <josullvn+@cs.cmu.edu>
+ *
+ * Changes made for release in 3.0.10 :
+ * ----------------------------------
+ * - Fix eject "hang" of the driver under 2.2.X :
+ * o create wv_flush_stale_links()
+ * o Rename wavelan_release to wv_pcmcia_release & move up
+ * o move unregister_netdev to wavelan_detach()
+ * o wavelan_release() no longer call wavelan_detach()
+ * o Supress "release" timer
+ * o Other cleanups & fixes
+ * - New MAC address in the probe
+ * - Reorg PSA_CRC code (endian neutral & cleaner)
+ * - Correct initialisation of the i82593 from Lucent manual
+ * - Put back the watchdog, with larger timeout
+ * - TRANSMIT_NO_CRC is a "normal" error, so recover from it
+ * from Derrick J Brashear <shadow@dementia.org>
+ * - Better handling of TX and RX normal failure conditions
+ * - #ifdef out all the roaming code
+ * - Add ESSID & "AP current address" ioctl stubs
+ * - General cleanup of the code
+ *
+ * Changes made for release in 3.0.13 :
+ * ----------------------------------
+ * - Re-enable compilation of roaming code by default, but with
+ * do_roaming = 0
+ * - Nuke `nwid=nwid^ntohs(beacon->domain_id)' in wl_roam_gather
+ * at the demand of John Carol Langford <jcl@gs176.sp.cs.cmu.edu>
+ * - Introduced WAVELAN_ROAMING_EXT for incomplete ESSID stuff.
+ *
+ * Changes made for release in 3.0.15 :
+ * ----------------------------------
+ * - Change e-mail and web page addresses
+ * - Watchdog timer is now correctly expressed in HZ, not in jiffies
+ * - Add channel number to the list of frequencies in range
+ * - Add the (short) list of bit-rates in range
+ * - Developp a new sensitivity... (sens.value & sens.fixed)
+ *
+ * Changes made for release in 3.1.2 :
+ * ---------------------------------
+ * - Fix check for root permission (break instead of exit)
+ * - New nwid & encoding setting (Wireless Extension 9)
+ *
+ * Wishes & dreams:
+ * ----------------
+ * - Cleanup and integrate the roaming code
+ * (std debug, set DomainID, decay avg and co...)
+ */
+
+/***************************** INCLUDES *****************************/
+
+/* Linux headers that we need */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/malloc.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+
+#ifdef CONFIG_NET_RADIO
+#include <linux/wireless.h> /* Wireless extensions */
+#endif
+
+/* Pcmcia headers that we need */
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/version.h>
+
+/* Wavelan declarations */
+#include "i82593.h" /* Definitions for the Intel chip */
+
+#include "wavelan.h" /* Others bits of the hardware */
+
+/************************** DRIVER OPTIONS **************************/
+/*
+ * `#define' or `#undef' the following constant to change the behaviour
+ * of the driver...
+ */
+#define WAVELAN_ROAMING /* Include experimental roaming code */
+#undef WAVELAN_ROAMING_EXT /* Enable roaming wireless extensions */
+#undef SET_PSA_CRC /* Set the CRC in PSA (slower) */
+#define USE_PSA_CONFIG /* Use info from the PSA */
+#undef STRUCT_CHECK /* Verify padding of structures */
+#undef EEPROM_IS_PROTECTED /* Doesn't seem to be necessary */
+#define MULTICAST_AVOID /* Avoid extra multicast (I'm sceptical) */
+#undef SET_MAC_ADDRESS /* Experimental */
+
+#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */
+/* Warning : these stuff will slow down the driver... */
+#define WIRELESS_SPY /* Enable spying addresses */
+#undef HISTOGRAM /* Enable histogram of sig level... */
+#endif
+
+/****************************** DEBUG ******************************/
+
+#undef DEBUG_MODULE_TRACE /* Module insertion/removal */
+#undef DEBUG_CALLBACK_TRACE /* Calls made by Linux */
+#undef DEBUG_INTERRUPT_TRACE /* Calls to handler */
+#undef DEBUG_INTERRUPT_INFO /* type of interrupt & so on */
+#define DEBUG_INTERRUPT_ERROR /* problems */
+#undef DEBUG_CONFIG_TRACE /* Trace the config functions */
+#undef DEBUG_CONFIG_INFO /* What's going on... */
+#define DEBUG_CONFIG_ERRORS /* Errors on configuration */
+#undef DEBUG_TX_TRACE /* Transmission calls */
+#undef DEBUG_TX_INFO /* Header of the transmited packet */
+#undef DEBUG_TX_FAIL /* Normal failure conditions */
+#define DEBUG_TX_ERROR /* Unexpected conditions */
+#undef DEBUG_RX_TRACE /* Transmission calls */
+#undef DEBUG_RX_INFO /* Header of the transmited packet */
+#undef DEBUG_RX_FAIL /* Normal failure conditions */
+#define DEBUG_RX_ERROR /* Unexpected conditions */
+#undef DEBUG_PACKET_DUMP 32 /* Dump packet on the screen */
+#undef DEBUG_IOCTL_TRACE /* Misc call by Linux */
+#undef DEBUG_IOCTL_INFO /* Various debug info */
+#define DEBUG_IOCTL_ERROR /* What's going wrong */
+#define DEBUG_BASIC_SHOW /* Show basic startup info */
+#undef DEBUG_VERSION_SHOW /* Print version info */
+#undef DEBUG_PSA_SHOW /* Dump psa to screen */
+#undef DEBUG_MMC_SHOW /* Dump mmc to screen */
+#undef DEBUG_SHOW_UNUSED /* Show also unused fields */
+#undef DEBUG_I82593_SHOW /* Show i82593 status */
+#undef DEBUG_DEVICE_SHOW /* Show device parameters */
+
+/************************ CONSTANTS & MACROS ************************/
+
+#ifdef DEBUG_VERSION_SHOW
+static const char *version = "wavelan_cs.c : v21 (wireless extensions) 18/10/99\n";
+#endif
+
+/* Watchdog temporisation */
+#define WATCHDOG_JIFFIES (256*HZ/100)
+
+/* Fix a bug in some old wireless extension definitions */
+#ifndef IW_ESSID_MAX_SIZE
+#define IW_ESSID_MAX_SIZE 32
+#endif
+
+/* ------------------------ PRIVATE IOCTL ------------------------ */
+
+#define SIOCSIPQTHR SIOCDEVPRIVATE /* Set quality threshold */
+#define SIOCGIPQTHR SIOCDEVPRIVATE + 1 /* Get quality threshold */
+#define SIOCSIPROAM SIOCDEVPRIVATE + 2 /* Set roaming state */
+#define SIOCGIPROAM SIOCDEVPRIVATE + 3 /* Get roaming state */
+
+#define SIOCSIPHISTO SIOCDEVPRIVATE + 6 /* Set histogram ranges */
+#define SIOCGIPHISTO SIOCDEVPRIVATE + 7 /* Get histogram values */
+
+/*************************** WaveLAN Roaming **************************/
+#ifdef WAVELAN_ROAMING /* Conditional compile, see above in options */
+
+#define WAVELAN_ROAMING_DEBUG 0 /* 1 = Trace of handover decisions */
+ /* 2 = Info on each beacon rcvd... */
+#define MAX_WAVEPOINTS 7 /* Max visible at one time */
+#define WAVEPOINT_HISTORY 5 /* SNR sample history slow search */
+#define WAVEPOINT_FAST_HISTORY 2 /* SNR sample history fast search */
+#define SEARCH_THRESH_LOW 10 /* SNR to enter cell search */
+#define SEARCH_THRESH_HIGH 13 /* SNR to leave cell search */
+#define WAVELAN_ROAMING_DELTA 1 /* Hysteresis value (+/- SNR) */
+#define CELL_TIMEOUT 2*HZ /* in jiffies */
+
+#define FAST_CELL_SEARCH 1 /* Boolean values... */
+#define NWID_PROMISC 1 /* for code clarity. */
+
+typedef struct wavepoint_beacon
+{
+ unsigned char dsap, /* Unused */
+ ssap, /* Unused */
+ ctrl, /* Unused */
+ O,U,I, /* Unused */
+ spec_id1, /* Unused */
+ spec_id2, /* Unused */
+ pdu_type, /* Unused */
+ seq; /* WavePoint beacon sequence number */
+ unsigned short domain_id, /* WavePoint Domain ID */
+ nwid; /* WavePoint NWID */
+} wavepoint_beacon;
+
+typedef struct wavepoint_history
+{
+ unsigned short nwid; /* WavePoint's NWID */
+ int average_slow; /* SNR running average */
+ int average_fast; /* SNR running average */
+ unsigned char sigqual[WAVEPOINT_HISTORY]; /* Ringbuffer of recent SNR's */
+ unsigned char qualptr; /* Index into ringbuffer */
+ unsigned char last_seq; /* Last seq. no seen for WavePoint */
+ struct wavepoint_history *next; /* Next WavePoint in table */
+ struct wavepoint_history *prev; /* Previous WavePoint in table */
+ unsigned long last_seen; /* Time of last beacon recvd, jiffies */
+} wavepoint_history;
+
+struct wavepoint_table
+{
+ wavepoint_history *head; /* Start of ringbuffer */
+ int num_wavepoints; /* No. of WavePoints visible */
+ unsigned char locked; /* Table lock */
+};
+
+#endif /* WAVELAN_ROAMING */
+
+/****************************** TYPES ******************************/
+
+/* Shortcuts */
+typedef struct net_device device;
+typedef struct net_device_stats en_stats;
+typedef struct iw_statistics iw_stats;
+typedef struct iw_quality iw_qual;
+typedef struct iw_freq iw_freq;
+typedef struct net_local net_local;
+typedef struct timer_list timer_list;
+
+/* Basic types */
+typedef u_char mac_addr[WAVELAN_ADDR_SIZE]; /* Hardware address */
+
+/*
+ * Static specific data for the interface.
+ *
+ * For each network interface, Linux keep data in two structure. "device"
+ * keep the generic data (same format for everybody) and "net_local" keep
+ * the additional specific data.
+ * Note that some of this specific data is in fact generic (en_stats, for
+ * example).
+ */
+struct net_local
+{
+ dev_node_t node; /* ???? What is this stuff ???? */
+ device * dev; /* Reverse link... */
+ dev_link_t * link; /* pcmcia structure */
+ en_stats stats; /* Ethernet interface statistics */
+ int nresets; /* Number of hw resets */
+ u_char configured; /* If it is configured */
+ u_char reconfig_82593; /* Need to reconfigure the controler */
+ u_char promiscuous; /* Promiscuous mode */
+ u_char allmulticast; /* All Multicast mode */
+ int mc_count; /* Number of multicast addresses */
+ timer_list watchdog; /* To avoid blocking state */
+
+ u_char status; /* Current i82593 status */
+ int stop; /* Current i82593 Stop Hit Register */
+ int rfp; /* Last DMA machine receive pointer */
+ int overrunning; /* Receiver overrun flag */
+
+#ifdef WIRELESS_EXT
+ iw_stats wstats; /* Wireless specific stats */
+#endif
+
+#ifdef WIRELESS_SPY
+ int spy_number; /* Number of addresses to spy */
+ mac_addr spy_address[IW_MAX_SPY]; /* The addresses to spy */
+ iw_qual spy_stat[IW_MAX_SPY]; /* Statistics gathered */
+#endif /* WIRELESS_SPY */
+#ifdef HISTOGRAM
+ int his_number; /* Number of intervals */
+ u_char his_range[16]; /* Boundaries of interval ]n-1; n] */
+ u_long his_sum[16]; /* Sum in interval */
+#endif /* HISTOGRAM */
+#ifdef WAVELAN_ROAMING
+ u_long domain_id; /* Domain ID we lock on for roaming */
+ int filter_domains; /* Check Domain ID of beacon found */
+ struct wavepoint_table wavepoint_table; /* Table of visible WavePoints*/
+ wavepoint_history * curr_point; /* Current wavepoint */
+ int cell_search; /* Searching for new cell? */
+ struct timer_list cell_timer; /* Garbage collection */
+#endif /* WAVELAN_ROAMING */
+};
+
+/**************************** PROTOTYPES ****************************/
+
+#ifdef WAVELAN_ROAMING
+/* ---------------------- ROAMING SUBROUTINES -----------------------*/
+
+wavepoint_history *wl_roam_check(unsigned short nwid, net_local *lp);
+wavepoint_history *wl_new_wavepoint(unsigned short nwid, unsigned char seq, net_local *lp);
+void wl_del_wavepoint(wavepoint_history *wavepoint, net_local *lp);
+void wl_cell_expiry(unsigned long data);
+wavepoint_history *wl_best_sigqual(int fast_search, net_local *lp);
+void wl_update_history(wavepoint_history *wavepoint, unsigned char sigqual, unsigned char seq);
+void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp);
+void wv_nwid_filter(unsigned char mode, net_local *lp);
+void wv_roam_init(struct net_device *dev);
+void wv_roam_cleanup(struct net_device *dev);
+#endif /* WAVELAN_ROAMING */
+
+/* ----------------------- MISC SUBROUTINES ------------------------ */
+static inline unsigned long /* flags */
+ wv_splhi(void); /* Disable interrupts */
+static inline void
+ wv_splx(unsigned long); /* ReEnable interrupts : flags */
+static void
+ cs_error(client_handle_t, /* Report error to cardmgr */
+ int,
+ int);
+/* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */
+static inline u_char /* data */
+ hasr_read(u_long); /* Read the host interface : base address */
+static inline void
+ hacr_write(u_long, /* Write to host interface : base address */
+ u_char), /* data */
+ hacr_write_slow(u_long,
+ u_char);
+static void
+ psa_read(device *, /* Read the Parameter Storage Area */
+ int, /* offset in PSA */
+ u_char *, /* buffer to fill */
+ int), /* size to read */
+ psa_write(device *, /* Write to the PSA */
+ int, /* Offset in psa */
+ u_char *, /* Buffer in memory */
+ int); /* Length of buffer */
+static inline void
+ mmc_out(u_long, /* Write 1 byte to the Modem Manag Control */
+ u_short,
+ u_char),
+ mmc_write(u_long, /* Write n bytes to the MMC */
+ u_char,
+ u_char *,
+ int);
+static inline u_char /* Read 1 byte from the MMC */
+ mmc_in(u_long,
+ u_short);
+static inline void
+ mmc_read(u_long, /* Read n bytes from the MMC */
+ u_char,
+ u_char *,
+ int),
+ fee_wait(u_long, /* Wait for frequency EEprom : base address */
+ int, /* Base delay to wait for */
+ int); /* Number of time to wait */
+static void
+ fee_read(u_long, /* Read the frequency EEprom : base address */
+ u_short, /* destination offset */
+ u_short *, /* data buffer */
+ int); /* number of registers */
+/* ---------------------- I82593 SUBROUTINES ----------------------- */
+static int
+ wv_82593_cmd(device *, /* synchronously send a command to i82593 */
+ char *,
+ int,
+ int);
+static inline int
+ wv_diag(device *); /* Diagnostique the i82593 */
+static int
+ read_ringbuf(device *, /* Read a receive buffer */
+ int,
+ char *,
+ int);
+static inline void
+ wv_82593_reconfig(device *); /* Reconfigure the controler */
+/* ------------------- DEBUG & INFO SUBROUTINES ------------------- */
+static inline void
+ wv_init_info(device *); /* display startup info */
+/* ------------------- IOCTL, STATS & RECONFIG ------------------- */
+static en_stats *
+ wavelan_get_stats(device *); /* Give stats /proc/net/dev */
+/* ----------------------- PACKET RECEPTION ----------------------- */
+static inline int
+ wv_start_of_frame(device *, /* Seek beggining of current frame */
+ int, /* end of frame */
+ int); /* start of buffer */
+static inline void
+ wv_packet_read(device *, /* Read a packet from a frame */
+ int,
+ int),
+ wv_packet_rcv(device *); /* Read all packets waiting */
+/* --------------------- PACKET TRANSMISSION --------------------- */
+static inline void
+ wv_packet_write(device *, /* Write a packet to the Tx buffer */
+ void *,
+ short);
+static int
+ wavelan_packet_xmit(struct sk_buff *, /* Send a packet */
+ device *);
+/* -------------------- HARDWARE CONFIGURATION -------------------- */
+static inline int
+ wv_mmc_init(device *); /* Initialize the modem */
+static int
+ wv_ru_stop(device *), /* Stop the i82593 receiver unit */
+ wv_ru_start(device *); /* Start the i82593 receiver unit */
+static int
+ wv_82593_config(device *); /* Configure the i82593 */
+static inline int
+ wv_pcmcia_reset(device *); /* Reset the pcmcia interface */
+static int
+ wv_hw_config(device *); /* Reset & configure the whole hardware */
+static inline void
+ wv_hw_reset(device *); /* Same, + start receiver unit */
+static inline int
+ wv_pcmcia_config(dev_link_t *); /* Configure the pcmcia interface */
+static void
+ wv_pcmcia_release(u_long), /* Remove a device */
+ wv_flush_stale_links(void); /* "detach" all possible devices */
+/* ---------------------- INTERRUPT HANDLING ---------------------- */
+static void
+wavelan_interrupt(int, /* Interrupt handler */
+ void *,
+ struct pt_regs *);
+static void
+ wavelan_watchdog(u_long); /* Transmission watchdog */
+/* ------------------- CONFIGURATION CALLBACKS ------------------- */
+static int
+ wavelan_open(device *), /* Open the device */
+ wavelan_close(device *), /* Close the device */
+ wavelan_init(device *); /* Do nothing */
+static dev_link_t *
+ wavelan_attach(void); /* Create a new device */
+static void
+ wavelan_detach(dev_link_t *); /* Destroy a removed device */
+static int
+ wavelan_event(event_t, /* Manage pcmcia events */
+ int,
+ event_callback_args_t *);
+
+/**************************** VARIABLES ****************************/
+
+static dev_info_t dev_info = "wavelan_cs";
+static dev_link_t *dev_list = NULL; /* Linked list of devices */
+
+/* WARNING : the following variable MUST be volatile
+ * It is used by wv_82593_cmd to syncronise with wavelan_interrupt */
+static volatile int wv_wait_completed = 0;
+
+/*
+ * Parameters that can be set with 'insmod'
+ * The exact syntax is 'insmod wavelan_cs.o <var>=<value>'
+ */
+
+/* Bit map of interrupts to choose from */
+/* This means pick from 15, 14, 12, 11, 10, 9, 7, 5, 4 and 3 */
+static int irq_mask = 0xdeb8;
+static int irq_list[4] = { -1 };
+
+/* Shared memory speed, in ns */
+static int mem_speed = 0;
+
+/* New module interface */
+MODULE_PARM(irq_mask, "i");
+MODULE_PARM(irq_list, "1-4i");
+MODULE_PARM(mem_speed, "i");
+
+#ifdef WAVELAN_ROAMING /* Conditional compile, see above in options */
+/* Enable roaming mode ? No ! Please keep this to 0 */
+static int do_roaming = 0;
+MODULE_PARM(do_roaming, "i");
+#endif /* WAVELAN_ROAMING */
+
+#endif /* WAVELAN_CS_H */
+
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)