patch-2.3.21 linux/drivers/net/wan/Makefile

• Lines: 182
• Date: Mon Oct 11 10:13:25 1999
• Orig file: v2.3.20/linux/drivers/net/wan/Makefile
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.3.20/linux/drivers/net/wan/Makefile linux/drivers/net/wan/Makefile
@@ -0,0 +1,181 @@
+# File: drivers/net/wan/Makefile
+#
+# Makefile for the Linux network (wan) device drivers.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+# Note 2! The CFLAGS definition is now inherited from the
+# parent makefile.
+#
+
+SUB_DIRS     := 
+MOD_SUB_DIRS := $(SUB_DIRS)
+ALL_SUB_DIRS := $(SUB_DIRS)
+
+L_TARGET := wan.a
+L_OBJS   :=
+M_OBJS   :=
+
+# Need these to keep track of whether the 82530 or SYNCPPP
+# modules should really go in the kernel or a module.
+CONFIG_85230_BUILTIN :=
+CONFIG_85230_MODULE  :=
+CONFIG_SYNCPPP_BUILTIN :=
+CONFIG_SYNCPPP_MODULE  :=
+
+ifeq ($(CONFIG_HOSTESS_SV11),y)
+L_OBJS += hostess_sv11.o
+CONFIG_85230_BUILTIN = y
+CONFIG_SYNCPPP_BUILTIN = y
+else
+  ifeq ($(CONFIG_HOSTESS_SV11),m)
+  CONFIG_85230_MODULE = y
+  CONFIG_SYNCPPP_MODULE = y
+  M_OBJS += hostess_sv11.o
+  endif
+endif
+
+ifeq ($(CONFIG_SEALEVEL_4021),y)
+L_OBJS += sealevel.o
+CONFIG_85230_BUILTIN = y
+CONFIG_SYNCPPP_BUILTIN = y
+else
+  ifeq ($(CONFIG_SEALEVEL_4021),m)
+  CONFIG_85230_MODULE = y
+  CONFIG_SYNCPPP_MODULE = y
+  M_OBJS += sealevel.o
+  endif
+endif
+
+ifeq ($(CONFIG_COSA),y)
+L_OBJS += cosa.o
+CONFIG_SYNCPPP_BUILTIN = y
+else
+  ifeq ($(CONFIG_COSA),m)
+  CONFIG_SYNCPPP_MODULE = y
+  M_OBJS += cosa.o
+  endif
+endif
+
+# If anything built-in uses syncppp, then build it into the kernel also.
+# If not, but a module uses it, build as a module.
+
+ifdef CONFIG_SYNCPPP_BUILTIN
+LX_OBJS += syncppp.o
+else
+  ifdef CONFIG_SYNCPPP_MODULE
+  MX_OBJS += syncppp.o
+  endif
+endif
+
+# If anything built-in uses Z85230, then build it into the kernel also.
+# If not, but a module uses it, build as a module.
+
+ifdef CONFIG_85230_BUILTIN
+LX_OBJS += z85230.o
+else
+  ifdef CONFIG_85230_MODULE
+  MX_OBJS += z85230.o
+  endif
+endif
+
+ifeq ($(CONFIG_DLCI),y)
+L_OBJS += dlci.o 
+else
+  ifeq ($(CONFIG_DLCI),m)
+  M_OBJS += dlci.o
+  endif
+endif
+
+ifeq ($(CONFIG_SDLA),y)
+  L_OBJS += sdla.o
+else
+  ifeq ($(CONFIG_SDLA),m)
+  M_OBJS += sdla.o
+endif
+
+ifeq ($(CONFIG_VENDOR_SANGOMA),y)
+  LX_OBJS += sdladrv.o
+  L_OBJS += sdlamain.o
+  ifeq ($(CONFIG_WANPIPE_X25),y)
+    L_OBJS += sdla_x25.o
+  endif
+  ifeq ($(CONFIG_WANPIPE_FR),y)
+    L_OBJS += sdla_fr.o
+  endif
+  ifeq ($(CONFIG_WANPIPE_PPP),y)
+    L_OBJS += sdla_ppp.o
+  endif
+endif
+
+endif
+
+ifeq ($(CONFIG_VENDOR_SANGOMA),m)
+  MX_OBJS += sdladrv.o
+  M_OBJS += wanpipe.o
+  WANPIPE_OBJS = sdlamain.o
+  ifeq ($(CONFIG_WANPIPE_X25),y)
+    WANPIPE_OBJS += sdla_x25.o
+  endif
+  ifeq ($(CONFIG_WANPIPE_FR),y)
+    WANPIPE_OBJS += sdla_fr.o
+  endif
+  ifeq ($(CONFIG_WANPIPE_PPP),y)
+    WANPIPE_OBJS += sdla_ppp.o
+  endif
+endif
+
+ifeq ($(CONFIG_CYCLADES_SYNC),y)
+  LX_OBJS += cycx_drv.o
+  L_OBJS += cycx_main.o
+  ifeq ($(CONFIG_CYCLOMX_X25),y)
+    L_OBJS += cycx_x25.o
+  endif
+endif
+
+ifeq ($(CONFIG_CYCLADES_SYNC),m)
+  MX_OBJS += cycx_drv.o
+  M_OBJS += cyclomx.o
+  CYCLOMX_OBJS = cycx_main.o
+  ifeq ($(CONFIG_CYCLOMX_X25),y)
+    CYCLOMX_OBJS += cycx_x25.o
+  endif
+endif
+
+ifeq ($(CONFIG_X25_ASY),y)
+L_OBJS += x25_asy.o
+else
+  ifeq ($(CONFIG_X25_ASY),m)
+  M_OBJS += x25_asy.o
+  endif
+endif
+
+ifeq ($(CONFIG_LAPBETHER),y)
+L_OBJS += lapbether.o
+else
+  ifeq ($(CONFIG_LAPBETHER),m)
+  M_OBJS += lapbether.o
+  endif
+endif
+
+ifeq ($(CONFIG_SBNI),y)
+L_OBJS += sbni.o
+else
+  ifeq ($(CONFIG_SBNI),m)
+  M_OBJS += sbni.o
+  endif
+endif
+
+include $(TOPDIR)/Rules.make
+
+clean:
+	rm -f core *.o *.a *.s
+
+wanpipe.o: $(WANPIPE_OBJS)
+	ld -r -o $@ $(WANPIPE_OBJS)
+
+cyclomx.o: $(CYCLOMX_OBJS)
+	ld -r -o $@ $(CYCLOMX_OBJS)
+