patch-2.3.19 linux/include/linux/cyclades.h
Next file: linux/include/linux/i2c.h
Previous file: linux/include/linux/cdrom.h
Back to the patch index
Back to the overall index
- Lines: 97
- Date:
Sat Oct 2 07:50:16 1999
- Orig file:
v2.3.18/linux/include/linux/cyclades.h
- Orig date:
Fri Jul 16 14:57:41 1999
diff -u --recursive --new-file v2.3.18/linux/include/linux/cyclades.h linux/include/linux/cyclades.h
@@ -1,9 +1,9 @@
/* $Revision: 2.6 $$Date: 1998/08/10 16:57:01 $
* linux/include/linux/cyclades.h
*
- * This file is maintained by Ivan Passos <ivan@cyclades.com>,
- * Marcio Saito <marcio@cyclades.com> and
- * Randolph Bentson <bentson@grieg.seaslug.org>.
+ * This file was initially written by
+ * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
+ * Ivan Passos <ivan@cyclades.com>.
*
* This file contains the general definitions for the cyclades.c driver
*$Log: cyclades.h,v $
@@ -317,6 +317,7 @@
#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */
#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */
#define C_IN_MRTS 0x00040000 /* modem RTS drop */
+#define C_IN_ICHAR 0x00080000
/* flow control */
@@ -373,6 +374,8 @@
#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */
#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */
#define C_CM_RXNNDT 0x63 /* rx no new data timeout */
+#define C_CM_TXFEMPTY 0x64
+#define C_CM_ICHAR 0x65
#define C_CM_MDCD 0x70 /* modem DCD change */
#define C_CM_MDSR 0x71 /* modem DSR change */
#define C_CM_MRI 0x72 /* modem RI change */
@@ -410,6 +413,8 @@
uclong hw_overflow; /* hw overflow counter */
uclong sw_overflow; /* sw overflow counter */
uclong comm_error; /* frame/parity error counter */
+ uclong ichar;
+ uclong filler[7];
};
@@ -504,7 +509,6 @@
#else
uclong filler;
#endif
-
};
struct cyclades_chip {
@@ -528,6 +532,15 @@
#define cy_readl(port) readl(port)
/*
+ * Statistics counters
+ */
+struct cyclades_icount {
+ __u32 cts, dsr, rng, dcd, tx, rx;
+ __u32 frame, parity, overrun, brk;
+ __u32 buf_overrun;
+};
+
+/*
* This is our internal structure for each serial port's state.
*
* Many fields are paralleled by the structure used by the serial_struct
@@ -575,12 +588,14 @@
unsigned long rflush_count;
struct termios normal_termios;
struct termios callout_termios;
- struct cyclades_monitor mon;
- struct cyclades_idle_stats idle_stats;
+ struct cyclades_monitor mon;
+ struct cyclades_idle_stats idle_stats;
+ struct cyclades_icount icount;
struct tq_struct tqueue;
wait_queue_head_t open_wait;
wait_queue_head_t close_wait;
wait_queue_head_t shutdown_wait;
+ wait_queue_head_t delta_msr_wait;
};
/*
@@ -593,6 +608,8 @@
#define Cy_EVENT_BREAK 3
#define Cy_EVENT_OPEN_WAKEUP 4
#define Cy_EVENT_SHUTDOWN_WAKEUP 5
+#define Cy_EVENT_DELTA_WAKEUP 6
+#define Cy_EVENT_Z_RX_FULL 7
#define CLOSING_WAIT_DELAY 30*HZ
#define CY_CLOSING_WAIT_NONE 65535
@@ -771,6 +788,7 @@
#define CyRTPR (0x21*2)
#define CyMSVR1 (0x6C*2)
#define CyMSVR2 (0x6D*2)
+#define CyANY_DELTA (0xF0)
#define CyDSR (0x80)
#define CyCTS (0x40)
#define CyRI (0x20)
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)