patch-2.3.19 linux/drivers/sound/nm256_audio.c
Next file: linux/drivers/sound/nm256_coeff.h
Previous file: linux/drivers/sound/nm256.h
Back to the patch index
Back to the overall index
- Lines: 1394
- Date:
Sat Oct 2 07:49:30 1999
- Orig file:
v2.3.18/linux/drivers/sound/nm256_audio.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.3.18/linux/drivers/sound/nm256_audio.c linux/drivers/sound/nm256_audio.c
@@ -0,0 +1,1393 @@
+/* Audio driver for the NeoMagic 256AV and 256ZX chipsets in native
+ mode, with AC97 mixer support.
+
+ Overall design and parts of this code stolen from vidc_*.c and
+ skeleton.c.
+
+ Yeah, there are a lot of magic constants in here. You tell ME what
+ they are. I just get this stuff psychically, remember?
+
+ This driver was written by someone who wishes to remain anonymous.
+ It is in the public domain, so share and enjoy. Try to make a profit
+ off of it; go on, I dare you. */
+
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include "sound_config.h"
+#include "soundmodule.h"
+#include "nm256.h"
+#include "nm256_coeff.h"
+
+int nm256_debug = 0;
+
+/* The size of the playback reserve. */
+#define NM256_PLAY_WMARK_SIZE 512
+
+static struct audio_driver nm256_audio_driver;
+
+static int nm256_grabInterrupt (struct nm256_info *card);
+static int nm256_releaseInterrupt (struct nm256_info *card);
+static void nm256_interrupt (int irq, void *dev_id, struct pt_regs *dummy);
+static void nm256_interrupt_zx (int irq, void *dev_id,
+ struct pt_regs *dummy);
+
+/* These belong in linux/pci.h. */
+#define PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO 0x8005
+#define PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO 0x8006
+
+/* List of cards. */
+static struct nm256_info *nmcard_list;
+
+/* Locate the card in our list. */
+static struct nm256_info *
+nm256_find_card (int dev)
+{
+ struct nm256_info *card;
+
+ for (card = nmcard_list; card != NULL; card = card->next_card)
+ if (card->dev[0] == dev || card->dev[1] == dev)
+ return card;
+
+ return NULL;
+}
+
+/* Ditto, but find the card struct corresponding to the mixer device DEV
+ instead. */
+static struct nm256_info *
+nm256_find_card_for_mixer (int dev)
+{
+ struct nm256_info *card;
+
+ for (card = nmcard_list; card != NULL; card = card->next_card)
+ if (card->mixer_oss_dev == dev)
+ return card;
+
+ return NULL;
+}
+
+static int usecache = 0;
+static int buffertop = 0;
+
+/* Check to see if we're using the bank of cached coefficients. */
+int
+nm256_cachedCoefficients (struct nm256_info *card)
+{
+ return usecache;
+}
+
+/* The actual rates supported by the card. */
+static int samplerates[9] = {
+ 8000, 11025, 16000, 22050, 24000, 32000, 44100, 48000, 99999999
+};
+
+/* Set the card samplerate, word size and stereo mode to correspond to
+ the settings in the CARD struct for the specified device in DEV.
+ We keep two separate sets of information, one for each device; the
+ hardware is not actually configured until a read or write is
+ attempted. */
+
+int
+nm256_setInfo (int dev, struct nm256_info *card)
+{
+ int x;
+ int w;
+ int targetrate;
+
+ if (card->dev[0] == dev)
+ w = 0;
+ else if (card->dev[1] == dev)
+ w = 1;
+ else
+ return -ENODEV;
+
+ targetrate = card->sinfo[w].samplerate;
+
+ if ((card->sinfo[w].bits != 8 && card->sinfo[w].bits != 16)
+ || targetrate < samplerates[0]
+ || targetrate > samplerates[7])
+ return -EINVAL;
+
+ for (x = 0; x < 8; x++)
+ if (targetrate < ((samplerates[x] + samplerates[x + 1]) / 2))
+ break;
+
+ if (x < 8) {
+ u8 speedbits = ((x << 4) & NM_RATE_MASK)
+ | (card->sinfo[w].bits == 16 ? NM_RATE_BITS_16: 0)
+ | (card->sinfo[w].stereo ? NM_RATE_STEREO : 0);
+
+ card->sinfo[w].samplerate = samplerates[x];
+
+ if (card->dev_for_play == dev && card->playing) {
+ nm256_loadCoefficient (card, 0, x);
+ nm256_writePort8 (card, 2,
+ NM_PLAYBACK_REG_OFFSET + NM_RATE_REG_OFFSET,
+ speedbits);
+ }
+
+ if (card->dev_for_record == dev && card->recording) {
+ nm256_loadCoefficient (card, 1, x);
+ nm256_writePort8 (card, 2,
+ NM_RECORD_REG_OFFSET + NM_RATE_REG_OFFSET,
+ speedbits);
+ }
+ return 0;
+ }
+ else
+ return -EINVAL;
+}
+
+/* Start the play process going. */
+static void
+startPlay (struct nm256_info *card)
+{
+ if (! card->playing) {
+ card->playing = 1;
+ if (nm256_grabInterrupt (card) == 0) {
+ nm256_setInfo (card->dev_for_play, card);
+
+ /* Enable playback engine and interrupts. */
+ nm256_writePort8 (card, 2, NM_PLAYBACK_ENABLE_REG,
+ NM_PLAYBACK_ENABLE_FLAG | NM_PLAYBACK_FREERUN);
+
+ /* Enable both channels. */
+ nm256_writePort16 (card, 2, NM_AUDIO_MUTE_REG, 0x0);
+ }
+ }
+}
+
+/* Request one chunk of AMT bytes from the recording device. When the
+ operation is complete, the data will be copied into BUFFER and the
+ function DMAbuf_inputintr will be invoked. */
+
+static void
+nm256_startRecording (struct nm256_info *card, char *buffer, u32 amt)
+{
+ u32 endpos;
+ int enableEngine = 0;
+ u32 ringsize = card->recordBufferSize;
+
+ if (amt > (ringsize / 2)) {
+ /* Of course this won't actually work right, because the
+ caller is going to assume we will give what we got asked
+ for. */
+ printk (KERN_ERR "NM256: Read request too large: %d\n", amt);
+ amt = ringsize / 2;
+ }
+
+ if (amt < 8) {
+ printk (KERN_ERR "NM256: Read request too small; %d\n", amt);
+ return;
+ }
+
+ /* If we're not currently recording, set up the start and end registers
+ for the recording engine. */
+ if (! card->recording) {
+ card->recording = 1;
+ if (nm256_grabInterrupt (card) == 0) {
+ card->curRecPos = 0;
+ nm256_setInfo (card->dev_for_record, card);
+ nm256_writePort32 (card, 2, NM_RBUFFER_START, card->abuf2);
+ nm256_writePort32 (card, 2, NM_RBUFFER_END,
+ card->abuf2 + ringsize);
+
+ nm256_writePort32 (card, 2, NM_RBUFFER_CURRP,
+ card->abuf2 + card->curRecPos);
+ enableEngine = 1;
+ }
+ else {
+ /* Not sure what else to do here. */
+ return;
+ }
+ }
+
+ endpos = card->abuf2 + ((card->curRecPos + amt) % ringsize);
+
+ card->recBuf = buffer;
+ card->requestedRecAmt = amt;
+ nm256_writePort32 (card, 2, NM_RBUFFER_WMARK, endpos);
+ /* Enable recording engine and interrupts. */
+ if (enableEngine)
+ nm256_writePort8 (card, 2, NM_RECORD_ENABLE_REG,
+ NM_RECORD_ENABLE_FLAG | NM_RECORD_FREERUN);
+}
+
+/* Stop the play engine. */
+static void
+stopPlay (struct nm256_info *card)
+{
+ /* Shut off sound from both channels. */
+ nm256_writePort16 (card, 2, NM_AUDIO_MUTE_REG,
+ NM_AUDIO_MUTE_LEFT | NM_AUDIO_MUTE_RIGHT);
+ /* Disable play engine. */
+ nm256_writePort8 (card, 2, NM_PLAYBACK_ENABLE_REG, 0);
+ if (card->playing) {
+ nm256_releaseInterrupt (card);
+
+ /* Reset the relevant state bits. */
+ card->playing = 0;
+ card->curPlayPos = 0;
+ }
+}
+
+/* Stop recording. */
+static void
+stopRecord (struct nm256_info *card)
+{
+ /* Disable recording engine. */
+ nm256_writePort8 (card, 2, NM_RECORD_ENABLE_REG, 0);
+
+ if (card->recording) {
+ nm256_releaseInterrupt (card);
+
+ card->recording = 0;
+ card->curRecPos = 0;
+ }
+}
+
+/* Ring buffers, man. That's where the hip-hop, wild-n-wooly action's at.
+ 1972?
+
+ Write AMT bytes of BUFFER to the playback ring buffer, and start the
+ playback engine running. It will only accept up to 1/2 of the total
+ size of the ring buffer. */
+
+static void
+nm256_write_block (struct nm256_info *card, char *buffer, u32 amt)
+{
+ u32 ringsize = card->playbackBufferSize;
+ u32 endstop;
+
+ if (amt > (ringsize / 2)) {
+ printk (KERN_ERR "NM256: Write request too large: %d\n", amt);
+ amt = (ringsize / 2);
+ }
+
+ if (amt < NM256_PLAY_WMARK_SIZE) {
+ printk (KERN_ERR "NM256: Write request too small: %d\n", amt);
+ return;
+ }
+
+ card->curPlayPos %= ringsize;
+
+ card->requested_amt = amt;
+
+ if ((card->curPlayPos + amt) >= ringsize) {
+ u32 rem = ringsize - card->curPlayPos;
+
+ nm256_writeBuffer8 (card, buffer, 1,
+ card->abuf1 + card->curPlayPos,
+ rem);
+ if (amt > rem)
+ nm256_writeBuffer8 (card, buffer, 1, card->abuf1,
+ amt - rem);
+ }
+ else
+ nm256_writeBuffer8 (card, buffer, 1,
+ card->abuf1 + card->curPlayPos,
+ amt);
+
+ /* Setup the start-n-stop-n-limit registers, and start that engine
+ goin'.
+
+ Normally we just let it wrap around to avoid the click-click
+ action scene. */
+ if (! card->playing) {
+ /* The PBUFFER_END register in this case points to one "word"
+ before the end of the buffer. */
+ int w = (card->dev_for_play == card->dev[0] ? 0 : 1);
+ int wordsize = (card->sinfo[w].bits == 16 ? 2 : 1)
+ * (card->sinfo[w].stereo ? 2 : 1);
+
+ /* Need to set the not-normally-changing-registers up. */
+ nm256_writePort32 (card, 2, NM_PBUFFER_START,
+ card->abuf1 + card->curPlayPos);
+ nm256_writePort32 (card, 2, NM_PBUFFER_END,
+ card->abuf1 + ringsize - wordsize);
+ nm256_writePort32 (card, 2, NM_PBUFFER_CURRP,
+ card->abuf1 + card->curPlayPos);
+ }
+ endstop = (card->curPlayPos + amt - NM256_PLAY_WMARK_SIZE) % ringsize;
+ nm256_writePort32 (card, 2, NM_PBUFFER_WMARK, card->abuf1 + endstop);
+ if (! card->playing)
+ startPlay (card);
+}
+
+/* We just got a card playback interrupt; process it. */
+static void
+nm256_get_new_block (struct nm256_info *card)
+{
+ /* Check to see how much got played so far. */
+ u32 amt = nm256_readPort32 (card, 2, NM_PBUFFER_CURRP) - card->abuf1;
+
+ if (amt >= card->playbackBufferSize) {
+ printk (KERN_ERR "NM256: Sound playback pointer invalid!\n");
+ amt = 0;
+ }
+
+ if (amt < card->curPlayPos)
+ amt = (card->playbackBufferSize - card->curPlayPos) + amt;
+ else
+ amt -= card->curPlayPos;
+
+ if (card->requested_amt > (amt + NM256_PLAY_WMARK_SIZE)) {
+ u32 endstop =
+ card->curPlayPos + card->requested_amt - NM256_PLAY_WMARK_SIZE;
+ nm256_writePort32 (card, 2, NM_PBUFFER_WMARK, card->abuf1 + endstop);
+ } else {
+ card->curPlayPos += card->requested_amt;
+ /* Get a new block to write. This will eventually invoke
+ nm256_write_block (). */
+ DMAbuf_outputintr (card->dev_for_play, 1);
+ }
+}
+
+/* Ultra cheez-whiz. But I'm too lazy to grep headers. */
+#define MIN(X,Y) ((X) < (Y) ? (X) : (Y))
+
+/* Read the last-recorded block from the ring buffer, copy it into the
+ saved buffer pointer, and invoke DMAuf_inputintr() with the recording
+ device. */
+
+static void
+nm256_read_block (struct nm256_info *card)
+{
+ /* Grab the current position of the recording pointer. */
+ u32 currptr = nm256_readPort32 (card, 2, NM_RBUFFER_CURRP) - card->abuf2;
+ u32 amtToRead = card->requestedRecAmt;
+ u32 ringsize = card->recordBufferSize;
+
+ if (currptr >= card->recordBufferSize) {
+ printk (KERN_ERR "NM256: Sound buffer record pointer invalid!\n");
+ currptr = 0;
+ }
+
+ /* This test is probably redundant; we shouldn't be here unless
+ it's true. */
+ if (card->recording) {
+ /* If we wrapped around, copy everything from the start of our
+ recording buffer to the end of the buffer. */
+ if (currptr < card->curRecPos) {
+ u32 amt = MIN (ringsize - card->curRecPos, amtToRead);
+
+ nm256_readBuffer8 (card, card->recBuf, 1,
+ card->abuf2 + card->curRecPos,
+ amt);
+ amtToRead -= amt;
+ card->curRecPos += amt;
+ card->recBuf += amt;
+ if (card->curRecPos == ringsize)
+ card->curRecPos = 0;
+ }
+
+ if ((card->curRecPos < currptr) && (amtToRead > 0)) {
+ u32 amt = MIN (currptr - card->curRecPos, amtToRead);
+ nm256_readBuffer8 (card, card->recBuf, 1,
+ card->abuf2 + card->curRecPos, amt);
+ card->curRecPos = ((card->curRecPos + amt) % ringsize);
+ }
+ card->recBuf = NULL;
+ card->requestedRecAmt = 0;
+ DMAbuf_inputintr (card->dev_for_record);
+ }
+}
+#undef MIN
+
+/* Initialize the hardware and various other card data we'll need
+ later. */
+static void
+nm256_initHw (struct nm256_info *card)
+{
+ int x;
+
+ card->playbackBufferSize = 16384;
+ card->recordBufferSize = 16384;
+
+ card->coeffBuf = card->bufend - NM_MAX_COEFFICIENT;
+ card->abuf2 = card->coeffBuf - card->recordBufferSize;
+ card->abuf1 = card->abuf2 - card->playbackBufferSize;
+ card->allCoeffBuf = card->abuf2 - (NM_TOTAL_COEFF_COUNT * 4);
+
+ /* Fixed setting. */
+ card->mixer = NM_MIXER_BASE;
+
+ card->playing = 0;
+ card->is_open_play = 0;
+ card->curPlayPos = 0;
+
+ card->recording = 0;
+ card->is_open_record = 0;
+ card->curRecPos = 0;
+
+ card->coeffsCurrent = 0;
+
+ card->opencnt[0] = 0; card->opencnt[1] = 0;
+
+ /* Reset everything. */
+ nm256_writePort8 (card, 2, 0, 0x11);
+
+ /* Disable recording. */
+ nm256_writePort8 (card, 2, NM_RECORD_ENABLE_REG, 0);
+ nm256_writePort16 (card, 2, 0x214, 0);
+
+ /* Reasonable default settings, but largely unnecessary. */
+ for (x = 0; x < 2; x++) {
+ card->sinfo[x].bits = 8;
+ card->sinfo[x].stereo = 0;
+ card->sinfo[x].samplerate = 8000;
+ }
+}
+
+/* Handle a potential interrupt for the device referred to by DEV_ID. */
+
+static void
+nm256_interrupt (int irq, void *dev_id, struct pt_regs *dummy)
+{
+ struct nm256_info *card = (struct nm256_info *)dev_id;
+ u16 status;
+ static int badintrcount = 0;
+
+ if ((card == NULL) || (card->magsig != NM_MAGIC_SIG)) {
+ printk (KERN_ERR "NM256: Bad card pointer\n");
+ return;
+ }
+
+ status = nm256_readPort16 (card, 2, NM_INT_REG);
+
+ /* Not ours. */
+ if (status == 0) {
+ if (badintrcount++ > 1000) {
+ printk (KERN_ERR "NM256: Releasing interrupt, over 1000 invalid interrupts\n");
+ nm256_releaseInterrupt (card);
+ }
+ return;
+ }
+
+ badintrcount = 0;
+
+ if (status & NM_PLAYBACK_INT) {
+ status &= ~NM_PLAYBACK_INT;
+ NM_ACK_INT (card, NM_PLAYBACK_INT);
+
+ if (card->playing)
+ nm256_get_new_block (card);
+ }
+
+ if (status & NM_RECORD_INT) {
+ status &= ~NM_RECORD_INT;
+ NM_ACK_INT (card, NM_RECORD_INT);
+
+ if (card->recording)
+ nm256_read_block (card);
+ }
+
+ if (status & NM_MISC_INT_1) {
+ u8 cbyte;
+
+ status &= ~NM_MISC_INT_1;
+ printk (KERN_ERR "NM256: Got misc interrupt #1\n");
+ NM_ACK_INT (card, NM_MISC_INT_1);
+ nm256_writePort16 (card, 2, NM_INT_REG, 0x8000);
+ cbyte = nm256_readPort8 (card, 2, 0x400);
+ nm256_writePort8 (card, 2, 0x400, cbyte | 2);
+ }
+
+ if (status & NM_MISC_INT_2) {
+ u8 cbyte;
+
+ status &= ~NM_MISC_INT_2;
+ printk (KERN_ERR "NM256: Got misc interrupt #2\n");
+ NM_ACK_INT (card, NM_MISC_INT_2);
+ cbyte = nm256_readPort8 (card, 2, 0x400);
+ nm256_writePort8 (card, 2, 0x400, cbyte & ~2);
+ }
+
+ if (status) {
+ printk (KERN_ERR "NM256: Fire in the hole! Unknown status 0x%x\n",
+ status);
+ /* Pray. */
+ NM_ACK_INT (card, status);
+ }
+}
+
+/* Handle a potential interrupt for the device referred to by DEV_ID.
+ This handler is for the 256ZX. */
+
+static void
+nm256_interrupt_zx (int irq, void *dev_id, struct pt_regs *dummy)
+{
+ struct nm256_info *card = (struct nm256_info *)dev_id;
+ u32 status;
+ static int badintrcount = 0;
+
+ if ((card == NULL) || (card->magsig != NM_MAGIC_SIG)) {
+ printk (KERN_ERR "NM256: Bad card pointer\n");
+ return;
+ }
+
+ status = nm256_readPort32 (card, 2, NM_INT_REG);
+
+ /* Not ours. */
+ if (status == 0) {
+ if (badintrcount++ > 1000) {
+ printk (KERN_ERR "NM256: Releasing interrupt, over 1000 invalid interrupts\n");
+ nm256_releaseInterrupt (card);
+ }
+ return;
+ }
+
+ badintrcount = 0;
+
+ if (status & NM2_PLAYBACK_INT) {
+ status &= ~NM2_PLAYBACK_INT;
+ NM2_ACK_INT (card, NM2_PLAYBACK_INT);
+
+ if (card->playing)
+ nm256_get_new_block (card);
+ }
+
+ if (status & NM2_RECORD_INT) {
+ status &= ~NM2_RECORD_INT;
+ NM2_ACK_INT (card, NM2_RECORD_INT);
+
+ if (card->recording)
+ nm256_read_block (card);
+ }
+
+ if (status & NM2_MISC_INT_1) {
+ u8 cbyte;
+
+ status &= ~NM2_MISC_INT_1;
+ printk (KERN_ERR "NM256: Got misc interrupt #1\n");
+ NM2_ACK_INT (card, NM2_MISC_INT_1);
+ cbyte = nm256_readPort8 (card, 2, 0x400);
+ nm256_writePort8 (card, 2, 0x400, cbyte | 2);
+ }
+
+ if (status & NM2_MISC_INT_2) {
+ u8 cbyte;
+
+ status &= ~NM2_MISC_INT_2;
+ printk (KERN_ERR "NM256: Got misc interrupt #2\n");
+ NM2_ACK_INT (card, NM2_MISC_INT_2);
+ cbyte = nm256_readPort8 (card, 2, 0x400);
+ nm256_writePort8 (card, 2, 0x400, cbyte & ~2);
+ }
+
+ if (status) {
+ printk (KERN_ERR "NM256: Fire in the hole! Unknown status 0x%x\n",
+ status);
+ /* Pray. */
+ NM2_ACK_INT (card, status);
+ }
+}
+
+/* Request our interrupt. */
+static int
+nm256_grabInterrupt (struct nm256_info *card)
+{
+ if (card->has_irq++ == 0) {
+ if (request_irq (card->irq, card->introutine, SA_SHIRQ,
+ "NM256_audio", card) < 0) {
+ printk (KERN_ERR "NM256: can't obtain IRQ %d\n", card->irq);
+ return -1;
+ }
+ }
+ return 0;
+}
+
+/* Release our interrupt. */
+static int
+nm256_releaseInterrupt (struct nm256_info *card)
+{
+ if (card->has_irq <= 0) {
+ printk (KERN_ERR "nm256: too many calls to releaseInterrupt\n");
+ return -1;
+ }
+ card->has_irq--;
+ if (card->has_irq == 0) {
+ free_irq (card->irq, card);
+ }
+ return 0;
+}
+
+static int
+nm256_isReady (struct ac97_hwint *dev)
+{
+ struct nm256_info *card = (struct nm256_info *)dev->driver_private;
+ int t2 = 10;
+ u32 testaddr;
+ u16 testb;
+ int done = 0;
+
+ if (card->magsig != NM_MAGIC_SIG) {
+ printk (KERN_ERR "NM256: Bad magic signature in isReady!\n");
+ return 0;
+ }
+
+ if (card->rev == REV_NM256AV) {
+ testaddr = 0xa06;
+ testb = 0x0100;
+ } else if (card->rev == REV_NM256ZX) {
+ testaddr = 0xa08;
+ testb = 0x0800;
+ } else {
+ return -1;
+ }
+
+ while (t2-- > 0) {
+ if ((nm256_readPort16 (card, 2, testaddr) & testb) == 0) {
+ done = 1;
+ break;
+ }
+ udelay (100);
+ }
+ return done;
+}
+
+static int
+nm256_readAC97Reg (struct ac97_hwint *dev, u8 reg)
+{
+ struct nm256_info *card = (struct nm256_info *)dev->driver_private;
+
+ if (card->magsig != NM_MAGIC_SIG) {
+ printk (KERN_ERR "NM256: Bad magic signature in readAC97Reg!\n");
+ return -EINVAL;
+ }
+
+ if (reg < 128) {
+ int res;
+
+ nm256_isReady (dev);
+ res = nm256_readPort16 (card, 2, card->mixer + reg);
+ udelay (1000);
+ return res;
+ }
+ else
+ return -EINVAL;
+}
+
+static int
+nm256_writeAC97Reg (struct ac97_hwint *dev, u8 reg, u16 value)
+{
+ unsigned long flags;
+ int tries = 2;
+ int done = 0;
+ u32 base;
+
+ struct nm256_info *card = (struct nm256_info *)dev->driver_private;
+
+ if (card->magsig != NM_MAGIC_SIG) {
+ printk (KERN_ERR "NM256: Bad magic signature in writeAC97Reg!\n");
+ return -EINVAL;
+ }
+
+ base = card->mixer;
+
+ save_flags (flags);
+ cli ();
+
+ nm256_isReady (dev);
+
+ /* Wait for the write to take, too. */
+ while ((tries-- > 0) && !done) {
+ nm256_writePort16 (card, 2, base + reg, value);
+ if (nm256_isReady (dev)) {
+ done = 1;
+ break;
+ }
+
+ }
+
+ restore_flags (flags);
+ udelay (1000);
+
+ return ! done;
+}
+
+struct initialValues
+{
+ unsigned short port;
+ unsigned short value;
+};
+
+static struct initialValues nm256_ac97_initial_values[] =
+{
+ { 0x0002, 0x8000 },
+ { 0x0004, 0x0000 },
+ { 0x0006, 0x0000 },
+ { 0x000A, 0x0000 },
+ { 0x000C, 0x0008 },
+ { 0x000E, 0x8008 },
+ { 0x0010, 0x8808 },
+ { 0x0012, 0x8808 },
+ { 0x0014, 0x8808 },
+ { 0x0016, 0x8808 },
+ { 0x0018, 0x0808 },
+ { 0x001A, 0x0000 },
+ { 0x001C, 0x0B0B },
+ { 0x0020, 0x0000 },
+ { 0xffff, 0xffff }
+};
+
+static int
+nm256_resetAC97 (struct ac97_hwint *dev)
+{
+ struct nm256_info *card = (struct nm256_info *)dev->driver_private;
+ int x;
+
+ if (card->magsig != NM_MAGIC_SIG) {
+ printk (KERN_ERR "NM256: Bad magic signature in resetAC97!\n");
+ return -EINVAL;
+ }
+
+ /* Reset the card. 'Tis magic! */
+ nm256_writePort8 (card, 2, 0x6c0, 1);
+ nm256_writePort8 (card, 2, 0x6cc, 0x87);
+ nm256_writePort8 (card, 2, 0x6cc, 0x80);
+ nm256_writePort8 (card, 2, 0x6cc, 0x0);
+
+ for (x = 0; nm256_ac97_initial_values[x].port != 0xffff; x++) {
+ ac97_put_register (dev,
+ nm256_ac97_initial_values[x].port,
+ nm256_ac97_initial_values[x].value);
+ }
+
+ return 0;
+}
+
+/* We don't do anything special here. */
+static int
+nm256_default_mixer_ioctl (int dev, unsigned int cmd, caddr_t arg)
+{
+ struct nm256_info *card = nm256_find_card_for_mixer (dev);
+ if (card != NULL)
+ return ac97_mixer_ioctl (&(card->mdev), cmd, arg);
+ else
+ return -ENODEV;
+}
+
+static struct mixer_operations nm256_mixer_operations = {
+ "NeoMagic",
+ "NM256AC97Mixer",
+ nm256_default_mixer_ioctl
+};
+
+/* I "love" C sometimes. Got braces? */
+static struct ac97_mixer_value_list mixer_defaults[] = {
+ { SOUND_MIXER_VOLUME, { { 85, 85 } } },
+ { SOUND_MIXER_SPEAKER, { { 100 } } },
+ { SOUND_MIXER_PCM, { { 65, 65 } } },
+ { SOUND_MIXER_CD, { { 65, 65 } } },
+ { -1, { { 0, 0 } } }
+};
+
+static int
+nm256_install_mixer (struct nm256_info *card)
+{
+ int mixer;
+
+ card->mdev.reset_device = nm256_resetAC97;
+ card->mdev.read_reg = nm256_readAC97Reg;
+ card->mdev.write_reg = nm256_writeAC97Reg;
+ card->mdev.driver_private = (void *)card;
+
+ if (ac97_init (&(card->mdev)))
+ return -1;
+
+ mixer = sound_alloc_mixerdev();
+ if (num_mixers >= MAX_MIXER_DEV) {
+ printk ("NM256 mixer: Unable to alloc mixerdev\n");
+ return -1;
+ }
+
+ mixer_devs[mixer] = &nm256_mixer_operations;
+ card->mixer_oss_dev = mixer;
+
+ /* Some reasonable default values. */
+ ac97_set_values (&(card->mdev), mixer_defaults);
+
+ printk(KERN_INFO "Initialized AC97 mixer\n");
+ return 0;
+}
+
+/* See if the signature left by the NM256 BIOS is intact; if so, we use
+ the associated address as the end of our buffer. */
+static void
+nm256_peek_for_sig (struct nm256_info *card, u32 port1addr)
+{
+ char *temp = ioremap_nocache (port1addr + card->port1_end - 0x0400, 16);
+ u32 sig;
+
+ if (temp == NULL) {
+ printk (KERN_ERR "NM256: Unable to scan for card signature in video RAM\n");
+ return;
+ }
+ memcpy_fromio (&sig, temp, sizeof (u32));
+ if ((sig & 0xffff0000) == 0x4e4d0000) {
+ memcpy_fromio (&(card->bufend), temp + 4, sizeof (u32));
+ printk (KERN_INFO "NM256: Found card signature in video RAM: 0x%x\n",
+ card->bufend);
+ }
+
+ release_region ((unsigned long) temp, 16);
+}
+
+/* Install a driver for the soundcard referenced by PCIDEV. */
+
+static int
+nm256_install(struct pci_dev *pcidev, enum nm256rev rev, char *verstr)
+{
+ struct nm256_info *card;
+ u32 port1addr = pcidev->resource[0].start;
+ u32 port2addr = pcidev->resource[1].start;
+ int x;
+
+ card = kmalloc (sizeof (struct nm256_info), GFP_KERNEL);
+ if (card == NULL) {
+ printk (KERN_ERR "NM256: out of memory!\n");
+ return 0;
+ }
+
+ card->magsig = NM_MAGIC_SIG;
+ card->playing = 0;
+ card->recording = 0;
+ card->rev = rev;
+
+ /* The NM256 has two memory ports. The first port is nothing
+ more than a chunk of video RAM, which is used as the I/O ring
+ buffer. The second port has the actual juicy stuff (like the
+ mixer and the playback engine control registers). */
+
+ card->ports[1] = ioremap_nocache (port2addr, NM_PORT2_SIZE);
+
+ if (card->ports[1] == NULL) {
+ printk (KERN_ERR "NM256: Unable to remap port 2\n");
+ kfree_s (card, sizeof (struct nm256_info));
+ return 0;
+ }
+
+ if (card->rev == REV_NM256AV) {
+ card->port1_end = 2560 * 1024;
+ card->introutine = nm256_interrupt;
+ }
+ else {
+ if (nm256_readPort8 (card, 2, 0xa0b) != 0)
+ card->port1_end = 6144 * 1024;
+ else
+ card->port1_end = 4096 * 1024;
+
+ card->introutine = nm256_interrupt_zx;
+ }
+
+ /* Default value. */
+ card->bufend = card->port1_end - 0x1400;
+
+ if (buffertop >= 98304 && buffertop < card->port1_end)
+ card->bufend = buffertop;
+ else
+ nm256_peek_for_sig (card, port1addr);
+
+ card->port1_start = card->bufend - 98304;
+
+ printk (KERN_INFO "NM256: Mapping port 1 from 0x%x - 0x%x\n",
+ card->port1_start, card->port1_end);
+
+ card->ports[0] =
+ ioremap_nocache (port1addr + card->port1_start,
+ card->port1_end - card->port1_start);
+
+ if (card->ports[0] == NULL) {
+ printk (KERN_ERR "NM256: Unable to remap port 1\n");
+ release_region ((unsigned long) card->ports[1], NM_PORT2_SIZE);
+ kfree_s (card, sizeof (struct nm256_info));
+ return 0;
+ }
+
+ /* See if we can get the interrupt. */
+
+ card->irq = pcidev->irq;
+ card->has_irq = 0;
+
+ if (nm256_grabInterrupt (card) != 0) {
+ release_region ((unsigned long) card->ports[0],
+ card->port1_end - card->port1_start);
+ release_region ((unsigned long) card->ports[1], NM_PORT2_SIZE);
+ kfree_s (card, sizeof (struct nm256_info));
+ return 0;
+ }
+
+ nm256_releaseInterrupt (card);
+
+ /*
+ * Init the board.
+ */
+
+ nm256_initHw (card);
+
+ for (x = 0; x < 2; x++) {
+ if ((card->dev[x] =
+ sound_install_audiodrv(AUDIO_DRIVER_VERSION,
+ "NM256", &nm256_audio_driver,
+ sizeof(struct audio_driver),
+ DMA_NODMA, AFMT_U8 | AFMT_S16_LE,
+ NULL, -1, -1)) >= 0) {
+ /* 1K minimum buffer size. */
+ audio_devs[card->dev[x]]->min_fragment = 10;
+ /* Maximum of 8K buffer size. */
+ audio_devs[card->dev[x]]->max_fragment = 13;
+ }
+ else {
+ printk(KERN_ERR "NM256: Too many PCM devices available\n");
+ release_region ((unsigned long) card->ports[0],
+ card->port1_end - card->port1_start);
+ release_region ((unsigned long) card->ports[1], NM_PORT2_SIZE);
+ kfree_s (card, sizeof (struct nm256_info));
+ return 0;
+ }
+ }
+
+ /* Insert the card in the list. */
+ card->next_card = nmcard_list;
+ nmcard_list = card;
+
+ printk(KERN_INFO "Initialized NeoMagic %s audio in PCI native mode\n",
+ verstr);
+
+ /*
+ * And our mixer. (We should allow support for other mixers, maybe.)
+ */
+
+ nm256_install_mixer (card);
+
+ return 1;
+}
+
+/*
+ * This loop walks the PCI configuration database and finds where
+ * the sound cards are.
+ */
+
+int
+init_nm256(void)
+{
+ struct pci_dev *pcidev = NULL;
+ int count = 0;
+
+ if(! pci_present())
+ return -ENODEV;
+
+ while((pcidev = pci_find_device(PCI_VENDOR_ID_NEOMAGIC,
+ PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO,
+ pcidev)) != NULL) {
+ count += nm256_install(pcidev, REV_NM256AV, "256AV");
+ }
+
+ while((pcidev = pci_find_device(PCI_VENDOR_ID_NEOMAGIC,
+ PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO,
+ pcidev)) != NULL) {
+ count += nm256_install(pcidev, REV_NM256ZX, "256ZX");
+ }
+
+ if (count == 0)
+ return -ENODEV;
+
+ printk (KERN_INFO "Done installing NM256 audio driver.\n");
+ return 0;
+}
+
+/*
+ * Open the device
+ *
+ * DEV - device
+ * MODE - mode to open device (logical OR of OPEN_READ and OPEN_WRITE)
+ *
+ * Called when opening the DMAbuf (dmabuf.c:259)
+ */
+static int
+nm256_audio_open(int dev, int mode)
+{
+ struct nm256_info *card = nm256_find_card (dev);
+ int w;
+
+ if (card == NULL)
+ return -ENODEV;
+
+ if (card->dev[0] == dev)
+ w = 0;
+ else if (card->dev[1] == dev)
+ w = 1;
+ else
+ return -ENODEV;
+
+ if (card->opencnt[w] > 0)
+ return -EBUSY;
+
+ /* No bits set? Huh? */
+ if (! ((mode & OPEN_READ) || (mode & OPEN_WRITE)))
+ return -EIO;
+
+ /* If it's open for both read and write, and the card's currently
+ being read or written to, then do the opposite of what has
+ already been done. Otherwise, don't specify any mode until the
+ user actually tries to do I/O. */
+
+ if ((mode & OPEN_WRITE) && (mode & OPEN_READ)) {
+ if (card->is_open_play)
+ mode = OPEN_WRITE;
+ else if (card->is_open_record)
+ mode = OPEN_READ;
+ else mode = 0;
+ }
+
+ if (mode & OPEN_WRITE) {
+ if (card->is_open_play == 0) {
+ card->dev_for_play = dev;
+ card->is_open_play = 1;
+ }
+ else
+ return -EBUSY;
+ }
+
+ if (mode & OPEN_READ) {
+ if (card->is_open_record == 0) {
+ card->dev_for_record = dev;
+ card->is_open_record = 1;
+ }
+ else
+ return -EBUSY;
+ }
+
+ card->opencnt[w]++;
+ return 0;
+}
+
+/*
+ * Close the device
+ *
+ * DEV - device
+ *
+ * Called when closing the DMAbuf (dmabuf.c:477)
+ * after halt_xfer
+ */
+static void
+nm256_audio_close(int dev)
+{
+ struct nm256_info *card = nm256_find_card (dev);
+
+ if (card != NULL) {
+ int w;
+
+ if (card->dev[0] == dev)
+ w = 0;
+ else if (card->dev[1] == dev)
+ w = 1;
+ else
+ return;
+
+ card->opencnt[w]--;
+ if (card->opencnt[w] <= 0) {
+ card->opencnt[w] = 0;
+
+ if (card->dev_for_play == dev) {
+ stopPlay (card);
+ card->is_open_play = 0;
+ card->dev_for_play = -1;
+ }
+
+ if (card->dev_for_record == dev) {
+ stopRecord (card);
+ card->is_open_record = 0;
+ card->dev_for_record = -1;
+ }
+ }
+ }
+}
+
+static int
+nm256_audio_ioctl(int dev, unsigned int cmd, caddr_t arg)
+{
+ int ret;
+ u32 oldinfo;
+ int w;
+
+ struct nm256_info *card = nm256_find_card (dev);
+
+ if (card == NULL)
+ return -ENODEV;
+
+ if (dev == card->dev[0])
+ w = 0;
+ else
+ w = 1;
+
+ switch (cmd)
+ {
+ case SOUND_PCM_WRITE_RATE:
+ get_user_ret(ret, (int *) arg, -EFAULT);
+
+ if (ret != 0) {
+ oldinfo = card->sinfo[w].samplerate;
+ card->sinfo[w].samplerate = ret;
+ ret = nm256_setInfo(dev, card);
+ if (ret != 0)
+ card->sinfo[w].samplerate = oldinfo;
+ }
+ if (ret == 0)
+ ret = card->sinfo[w].samplerate;
+ break;
+
+ case SOUND_PCM_READ_RATE:
+ ret = card->sinfo[w].samplerate;
+ break;
+
+ case SNDCTL_DSP_STEREO:
+ get_user_ret(ret, (int *) arg, -EFAULT);
+
+ card->sinfo[w].stereo = ret ? 1 : 0;
+ ret = nm256_setInfo (dev, card);
+ if (ret == 0)
+ ret = card->sinfo[w].stereo;
+
+ break;
+
+ case SOUND_PCM_WRITE_CHANNELS:
+ get_user_ret(ret, (int *) arg, -EFAULT);
+
+ if (ret < 1 || ret > 3)
+ ret = card->sinfo[w].stereo + 1;
+ else {
+ card->sinfo[w].stereo = ret - 1;
+ ret = nm256_setInfo (dev, card);
+ if (ret == 0)
+ ret = card->sinfo[w].stereo + 1;
+ }
+ break;
+
+ case SOUND_PCM_READ_CHANNELS:
+ ret = card->sinfo[w].stereo + 1;
+ break;
+
+ case SNDCTL_DSP_SETFMT:
+ get_user_ret(ret, (int *) arg, -EFAULT);
+
+ if (ret != 0) {
+ oldinfo = card->sinfo[w].bits;
+ card->sinfo[w].bits = ret;
+ ret = nm256_setInfo (dev, card);
+ if (ret != 0)
+ card->sinfo[w].bits = oldinfo;
+ }
+ if (ret == 0)
+ ret = card->sinfo[w].bits;
+ break;
+
+ case SOUND_PCM_READ_BITS:
+ ret = card->sinfo[w].bits;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return put_user(ret, (int *) arg);
+}
+
+/* Given the dev DEV and an associated physical buffer PHYSBUF, return
+ a pointer to the actual buffer in kernel space. */
+
+static char *
+nm256_getDMAbuffer (int dev, unsigned long physbuf)
+{
+ struct audio_operations *adev = audio_devs[dev];
+ struct dma_buffparms *dmap = adev->dmap_out;
+ char *dma_start =
+ (char *)(physbuf - (unsigned long)dmap->raw_buf_phys
+ + (unsigned long)dmap->raw_buf);
+
+ return dma_start;
+}
+
+
+/*
+ * Output a block to sound device
+ *
+ * dev - device number
+ * buf - physical address of buffer
+ * total_count - total byte count in buffer
+ * intrflag - set if this has been called from an interrupt
+ * (via DMAbuf_outputintr)
+ * restart_dma - set if engine needs to be re-initialised
+ *
+ * Called when:
+ * 1. Starting output (dmabuf.c:1327)
+ * 2. (dmabuf.c:1504)
+ * 3. A new buffer needs to be sent to the device (dmabuf.c:1579)
+ */
+static void
+nm256_audio_output_block(int dev, unsigned long physbuf,
+ int total_count, int intrflag)
+{
+ struct nm256_info *card = nm256_find_card (dev);
+
+ if (card != NULL) {
+ char *dma_buf = nm256_getDMAbuffer (dev, physbuf);
+ card->is_open_play = 1;
+ card->dev_for_play = dev;
+ nm256_write_block (card, dma_buf, total_count);
+ }
+}
+
+static void
+nm256_audio_start_input(int dev, unsigned long physbuf, int count,
+ int intrflag)
+{
+ struct nm256_info *card = nm256_find_card (dev);
+
+ if (card != NULL) {
+ char *dma_buf = nm256_getDMAbuffer (dev, physbuf);
+ card->is_open_record = 1;
+ card->dev_for_record = dev;
+ nm256_startRecording (card, dma_buf, count);
+ }
+}
+
+static int
+nm256_audio_prepare_for_input(int dev, int bsize, int bcount)
+{
+ struct nm256_info *card = nm256_find_card (dev);
+
+ if (card == NULL)
+ return -ENODEV;
+
+ if (card->is_open_record && card->dev_for_record != dev)
+ return -EBUSY;
+
+ audio_devs[dev]->dmap_in->flags |= DMA_NODMA;
+ return 0;
+}
+
+/*
+ * Prepare for outputting samples to `dev'
+ *
+ * Each buffer that will be passed will be `bsize' bytes long,
+ * with a total of `bcount' buffers.
+ *
+ * Called when:
+ * 1. A trigger enables audio output (dmabuf.c:978)
+ * 2. We get a write buffer without dma_mode setup (dmabuf.c:1152)
+ * 3. We restart a transfer (dmabuf.c:1324)
+ */
+static int
+nm256_audio_prepare_for_output(int dev, int bsize, int bcount)
+{
+ struct nm256_info *card = nm256_find_card (dev);
+
+ if (card == NULL)
+ return -ENODEV;
+
+ if (card->is_open_play && card->dev_for_play != dev)
+ return -EBUSY;
+
+ audio_devs[dev]->dmap_out->flags |= DMA_NODMA;
+ return 0;
+}
+
+/* Stop the current operations associated with DEV. */
+static void
+nm256_audio_reset(int dev)
+{
+ struct nm256_info *card = nm256_find_card (dev);
+
+ if (card != NULL) {
+ if (card->dev_for_play == dev)
+ stopPlay (card);
+ if (card->dev_for_record == dev)
+ stopRecord (card);
+ }
+}
+
+static int
+nm256_audio_local_qlen(int dev)
+{
+ return 0;
+}
+
+static struct audio_driver nm256_audio_driver =
+{
+ nm256_audio_open, /* open */
+ nm256_audio_close, /* close */
+ nm256_audio_output_block, /* output_block */
+ nm256_audio_start_input, /* start_input */
+ nm256_audio_ioctl, /* ioctl */
+ nm256_audio_prepare_for_input, /* prepare_for_input */
+ nm256_audio_prepare_for_output, /* prepare_for_output */
+ nm256_audio_reset, /* reset */
+ nm256_audio_local_qlen, /*+local_qlen */
+ NULL, /*+copy_from_user */
+ NULL, /*+halt_input */
+ NULL, /* halt_output */
+ NULL, /*+trigger */
+ NULL, /*+set_speed */
+ NULL, /*+set_bits */
+ NULL, /*+set_channels */
+};
+
+EXPORT_SYMBOL(init_nm256);
+
+#ifdef MODULE
+
+static int loaded = 0;
+
+MODULE_PARM (usecache, "i");
+MODULE_PARM (buffertop, "i");
+MODULE_PARM (nm256_debug, "i");
+
+int
+init_module (void)
+{
+ nmcard_list = NULL;
+ printk (KERN_INFO "NeoMagic 256AV/256ZX audio driver, version 1.0\n");
+
+ if (init_nm256 () == 0) {
+ SOUND_LOCK;
+ loaded = 1;
+ return 0;
+ }
+ else
+ return -ENODEV;
+}
+
+void
+cleanup_module (void)
+{
+ if (loaded) {
+ struct nm256_info *card;
+ struct nm256_info *next_card;
+
+ SOUND_LOCK_END;
+
+ for (card = nmcard_list; card != NULL; card = next_card) {
+ stopPlay (card);
+ stopRecord (card);
+ if (card->has_irq)
+ free_irq (card->irq, card);
+ release_region ((unsigned long) card->ports[0],
+ card->port1_end - card->port1_start);
+ release_region ((unsigned long) card->ports[1], NM_PORT2_SIZE);
+ sound_unload_mixerdev (card->mixer_oss_dev);
+ sound_unload_audiodev (card->dev[0]);
+ sound_unload_audiodev (card->dev[1]);
+ next_card = card->next_card;
+ kfree_s (card, sizeof (struct nm256_info));
+ }
+ nmcard_list = NULL;
+ }
+}
+#endif
+
+/*
+ * Local variables:
+ * c-basic-offset: 4
+ * End:
+ */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)