patch-2.3.14 linux/include/asm-m68k/math-emu.h

• Lines: 301
• Date: Sun Aug 15 11:47:29 1999
• Orig file: v2.3.13/linux/include/asm-m68k/math-emu.h
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.3.13/linux/include/asm-m68k/math-emu.h linux/include/asm-m68k/math-emu.h
@@ -0,0 +1,300 @@
+#ifndef _ASM_M68K_SETUP_H
+#define _ASM_M68K_SETUP_H
+
+#include <asm/setup.h>
+#include <linux/linkage.h>
+
+/* Status Register bits */
+
+/* accrued exception bits */
+#define FPSR_AEXC_INEX	3
+#define FPSR_AEXC_DZ	4
+#define FPSR_AEXC_UNFL	5
+#define FPSR_AEXC_OVFL	6
+#define FPSR_AEXC_IOP	7
+
+/* exception status bits */
+#define FPSR_EXC_INEX1	8
+#define FPSR_EXC_INEX2	9
+#define FPSR_EXC_DZ	10
+#define FPSR_EXC_UNFL	11
+#define FPSR_EXC_OVFL	12
+#define FPSR_EXC_OPERR	13
+#define FPSR_EXC_SNAN	14
+#define FPSR_EXC_BSUN	15
+
+/* quotient byte, assumes big-endian, of course */
+#define FPSR_QUOTIENT(fpsr) (*((signed char *) &(fpsr) + 1))
+
+/* condition code bits */
+#define FPSR_CC_NAN	24
+#define FPSR_CC_INF	25
+#define FPSR_CC_Z	26
+#define FPSR_CC_NEG	27
+
+
+/* Control register bits */
+
+/* rounding mode */
+#define	FPCR_ROUND_RN	0		/* round to nearest/even */
+#define FPCR_ROUND_RZ	1		/* round to zero */
+#define FPCR_ROUND_RM	2		/* minus infinity */
+#define FPCR_ROUND_RP	3		/* plus infinity */
+
+/* rounding precision */
+#define FPCR_PRECISION_X	0	/* long double */
+#define FPCR_PRECISION_S	1	/* double */
+#define FPCR_PRECISION_D	2	/* float */
+
+
+/* Flags to select the debugging output */
+#define PDECODE		0
+#define PEXECUTE	1
+#define PCONV		2
+#define PNORM		3
+#define PREGISTER	4
+#define PINSTR		5
+#define PUNIMPL		6
+#define PMOVEM		7
+
+#define PMDECODE	(1<<PDECODE)
+#define PMEXECUTE	(1<<PEXECUTE)
+#define PMCONV		(1<<PCONV)
+#define PMNORM		(1<<PNORM)
+#define PMREGISTER	(1<<PREGISTER)
+#define PMINSTR		(1<<PINSTR)
+#define PMUNIMPL	(1<<PUNIMPL)
+#define PMMOVEM		(1<<PMOVEM)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+union fp_mant64 {
+	unsigned long long m64;
+	unsigned long m32[2];
+};
+
+union fp_mant128 {
+	unsigned long long m64[2];
+	unsigned long m32[4];
+};
+
+/* internal representation of extended fp numbers */
+struct fp_ext {
+	unsigned char lowmant;
+	unsigned char sign;
+	unsigned short exp;
+	union fp_mant64 mant;
+};
+
+/* C representation of FPU registers */
+/* NOTE: if you change this, you have to change the assembler offsets
+   below and the size in <asm/fpu.h>, too */
+struct fp_data {
+	struct fp_ext fpreg[8];
+	unsigned int fpcr;
+	unsigned int fpsr;
+	unsigned int fpiar;
+	unsigned short prec;
+	unsigned short rnd;
+	struct fp_ext temp[2];
+};
+
+#if FPU_EMU_DEBUG
+extern unsigned int fp_debugprint;
+
+#define dprint(bit, fmt, args...) ({			\
+	if (fp_debugprint & (1 << (bit)))		\
+		printk(fmt, ## args);			\
+})
+#else
+#define dprint(bit, fmt, args...)
+#endif
+
+#define uprint(str) ({					\
+	static int __count = 3;				\
+							\
+	if (__count > 0) {				\
+		printk("You just hit an unimplemented "	\
+		       "fpu instruction (%s)\n", str);	\
+		printk("Please report this to ....\n");	\
+		__count--;				\
+	}						\
+})
+
+#define FPDATA		((struct fp_data *)current->thread.fp)
+
+#else	/* __ASSEMBLY__ */
+
+#define FPDATA		%a2
+
+/* offsets from the base register to the floating point data in the task struct */
+#define FPD_FPREG	(TASK_THREAD+THREAD_FPREG+0)
+#define FPD_FPCR	(TASK_THREAD+THREAD_FPREG+96)
+#define FPD_FPSR	(TASK_THREAD+THREAD_FPREG+100)
+#define FPD_FPIAR	(TASK_THREAD+THREAD_FPREG+104)
+#define FPD_PREC	(TASK_THREAD+THREAD_FPREG+108)
+#define FPD_RND		(TASK_THREAD+THREAD_FPREG+110)
+#define FPD_TEMPFP1	(TASK_THREAD+THREAD_FPREG+112)
+#define FPD_TEMPFP2	(TASK_THREAD+THREAD_FPREG+124)
+#define FPD_SIZEOF	(TASK_THREAD+THREAD_FPREG+136)
+
+/* offsets on the stack to access saved registers,
+ * these are only used during instruction decoding
+ * where we always know how deep we're on the stack.
+ */
+#define FPS_DO		(PT_D0)
+#define FPS_D1		(PT_D1)
+#define FPS_D2		(PT_D2)
+#define FPS_A0		(PT_A0)
+#define FPS_A1		(PT_A1)
+#define FPS_A2		(PT_A2)
+#define FPS_SR		(PT_SR)
+#define FPS_PC		(PT_PC)
+#define FPS_EA		(PT_PC+6)
+#define FPS_PC2		(PT_PC+10)
+
+.macro	fp_get_fp_reg
+	lea	(FPD_FPREG,FPDATA,%d0.w*4),%a0
+	lea	(%a0,%d0.w*8),%a0
+.endm
+
+/* Macros used to get/put the current program counter.
+ * 020/030 use a different stack frame then 040/060, for the
+ * 040/060 the return pc points already to the next location,
+ * so this only needs to be modified for jump instructions.
+ */
+.macro	fp_get_pc dest
+	move.l	(FPS_PC+4,%sp),\dest
+.endm
+
+.macro	fp_put_pc src,jump=0
+	move.l	\src,(FPS_PC+4,%sp)
+.endm
+
+.macro	fp_get_instr_data	f,s,dest,label
+	getuser	\f,%sp@(FPS_PC+4)@(0),\dest,\label,%sp@(FPS_PC+4)
+	addq.l	#\s,%sp@(FPS_PC+4)
+.endm
+
+.macro	fp_get_instr_word	dest,label,addr
+	fp_get_instr_data	w,2,\dest,\label,\addr
+.endm
+
+.macro	fp_get_instr_long	dest,label,addr
+	fp_get_instr_data	l,4,\dest,\label,\addr
+.endm
+
+/* These macros are used to read from/write to user space
+ * on error we jump to the fixup section, load the fault
+ * address into %a0 and jump to the exit.
+ * (derived from <asm/uaccess.h>)
+ */
+.macro	getuser	size,src,dest,label,addr
+|	printf	,"[\size<%08x]",1,\addr
+.Lu1\@:	moves\size	\src,\dest
+
+	.section .fixup,"ax"
+	.even
+.Lu2\@:	move.l	\addr,%a0
+	jra	\label
+	.previous
+
+	.section __ex_table,"a"
+	.align	4
+	.long	.Lu1\@,.Lu2\@
+	.previous
+.endm
+
+.macro	putuser	size,src,dest,label,addr
+|	printf	,"[\size>%08x]",1,\addr
+.Lu1\@:	moves\size	\src,\dest
+.Lu2\@:
+
+	.section .fixup,"ax"
+	.even
+.Lu3\@:	move.l	\addr,%a0
+	jra	\label
+	.previous
+
+	.section __ex_table,"a"
+	.align	4
+	.long	.Lu1\@,.Lu3\@
+	.long	.Lu2\@,.Lu3\@
+	.previous
+.endm
+
+
+.macro	movestack	nr,arg1,arg2,arg3,arg4,arg5
+	.if	\nr
+	movestack	(\nr-1),\arg2,\arg3,\arg4,\arg5
+	move.l	\arg1,-(%sp)
+	.endif
+.endm
+
+.macro	printf	bit=-1,string,nr=0,arg1,arg2,arg3,arg4,arg5
+#ifdef FPU_EMU_DEBUG
+	.data
+.Lpdata\@:
+	.string	"\string"
+	.previous
+
+	movem.l	%d0/%d1/%a0/%a1,-(%sp)
+	.if	\bit+1
+#if 0
+	moveq	#\bit,%d0
+	andw	#7,%d0
+	btst	%d0,fp_debugprint+((31-\bit)/8)
+#else
+	btst	#\bit,fp_debugprint+((31-\bit)/8)
+#endif
+	jeq	.Lpskip\@
+	.endif
+	movestack	\nr,\arg1,\arg2,\arg3,\arg4,\arg5
+	pea	.Lpdata\@
+	jsr	printk
+	lea	((\nr+1)*4,%sp),%sp
+.Lpskip\@:
+	movem.l	(%sp)+,%d0/%d1/%a0/%a1
+#endif
+.endm
+
+.macro	printx	bit,fp
+#ifdef FPU_EMU_DEBUG
+	movem.l	%d0/%a0,-(%sp)
+	lea	\fp,%a0
+#if 0
+	moveq	#'+',%d0
+	tst.w	(%a0)
+	jeq	.Lx1\@
+	moveq	#'-',%d0
+.Lx1\@:	printf	\bit," %c",1,%d0
+	move.l	(4,%a0),%d0
+	bclr	#31,%d0
+	jne	.Lx2\@
+	printf	\bit,"0."
+	jra	.Lx3\@
+.Lx2\@:	printf	\bit,"1."
+.Lx3\@:	printf	\bit,"%08x%08x",2,%d0,%a0@(8)
+	move.w	(2,%a0),%d0
+	ext.l	%d0
+	printf	\bit,"E%04x",1,%d0
+#else
+	printf	\bit," %08x%08x%08x",3,%a0@,%a0@(4),%a0@(8)
+#endif
+	movem.l	(%sp)+,%d0/%a0
+#endif
+.endm
+
+.macro	debug	instr,args
+#ifdef FPU_EMU_DEBUG
+	\instr	\args
+#endif
+.endm
+
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* _ASM_M68K_SETUP_H */