patch-2.3.13 linux/drivers/video/cyberfb.h
Next file: linux/drivers/video/dummycon.c
Previous file: linux/drivers/video/cyberfb.c
Back to the patch index
Back to the overall index
- Lines: 82
- Date:
Mon Aug 9 11:39:38 1999
- Orig file:
v2.3.12/linux/drivers/video/cyberfb.h
- Orig date:
Mon Dec 21 14:48:04 1998
diff -u --recursive --new-file v2.3.12/linux/drivers/video/cyberfb.h linux/drivers/video/cyberfb.h
@@ -128,26 +128,9 @@
#define GRFBBOPset 0xf /* 1 */
-/* Read VGA register */
-#define vgar(ba, reg) (*(((volatile caddr_t)ba)+reg))
-
-/* Write VGA register */
-#define vgaw(ba, reg, val) \
-*(((volatile caddr_t)ba)+reg) = ((val) & 0xff)
-
-/* Read 16 Bit VGA register */
-#define vgar16(ba, reg) ( *((unsigned short *) (((volatile caddr_t)ba)+reg)) )
-
/* Write 16 Bit VGA register */
#define vgaw16(ba, reg, val) \
-*((unsigned short *) (((volatile caddr_t)ba)+reg)) = val
-
-/* Read 32 Bit VGA register */
-#define vgar32(ba, reg) ( *((unsigned long *) (((volatile caddr_t)ba)+reg)) )
-
-/* Write 32 Bit VGA register */
-#define vgaw32(ba, reg, val) \
- *((unsigned long *) (((volatile caddr_t)ba)+reg)) = val
+*((unsigned short *) (((volatile unsigned char *)ba)+reg)) = val
/*
* Defines for the used register addresses (mw)
@@ -394,20 +377,20 @@
#define WGfx(ba, idx, val) \
-do { vgaw(ba, GCT_ADDRESS, idx); vgaw(ba, GCT_ADDRESS_W , val); } while (0)
+do { wb_64(ba, GCT_ADDRESS, idx); wb_64(ba, GCT_ADDRESS_W , val); } while (0)
#define WSeq(ba, idx, val) \
-do { vgaw(ba, SEQ_ADDRESS, idx); vgaw(ba, SEQ_ADDRESS_W , val); } while (0)
+do { wb_64(ba, SEQ_ADDRESS, idx); wb_64(ba, SEQ_ADDRESS_W , val); } while (0)
#define WCrt(ba, idx, val) \
-do { vgaw(ba, CRT_ADDRESS, idx); vgaw(ba, CRT_ADDRESS_W , val); } while (0)
+do { wb_64(ba, CRT_ADDRESS, idx); wb_64(ba, CRT_ADDRESS_W , val); } while (0)
#define WAttr(ba, idx, val) \
do { \
unsigned char tmp;\
- tmp = vgar(ba, ACT_ADDRESS_RESET);\
- vgaw(ba, ACT_ADDRESS_W, idx);\
- vgaw(ba, ACT_ADDRESS_W, val);\
+ tmp = rb_64(ba, ACT_ADDRESS_RESET);\
+ wb_64(ba, ACT_ADDRESS_W, idx);\
+ wb_64(ba, ACT_ADDRESS_W, val);\
} while (0)
#define SetTextPlane(ba, m) \
@@ -420,21 +403,17 @@
/* prototypes */
/* --------------------------------- */
-/* in cvision_core.c */
-inline void __cv_delay(unsigned long usecs);
-inline void GfxBusyWait(volatile caddr_t board);
-inline void GfxFifoWait(volatile caddr_t board);
-inline unsigned char RAttr(volatile caddr_t board, short idx);
-inline unsigned char RSeq(volatile caddr_t board, short idx);
-inline unsigned char RCrt(volatile caddr_t board, short idx);
-inline unsigned char RGfx(volatile caddr_t board, short idx);
+inline unsigned char RAttr(volatile unsigned char * board, short idx);
+inline unsigned char RSeq(volatile unsigned char * board, short idx);
+inline unsigned char RCrt(volatile unsigned char * board, short idx);
+inline unsigned char RGfx(volatile unsigned char * board, short idx);
inline void cv64_write_port(unsigned short bits,
volatile unsigned char *board);
inline void cvscreen(int toggle, volatile unsigned char *board);
inline void gfx_on_off(int toggle, volatile unsigned char *board);
#if 0
unsigned short cv64_compute_clock(unsigned long freq);
-int cv_has_4mb(volatile caddr_t fb);
+int cv_has_4mb(volatile unsigned char * fb);
void cv64_board_init(void);
void cv64_load_video_mode(struct fb_var_screeninfo *video_mode);
#endif
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)