patch-2.1.16 linux/include/asm-sparc64/floppy.h
Next file: linux/include/asm-sparc64/idprom.h
Previous file: linux/include/asm-sparc64/fcntl.h
Back to the patch index
Back to the overall index
- Lines: 361
- Date:
Fri Dec 13 11:37:47 1996
- Orig file:
v2.1.15/linux/include/asm-sparc64/floppy.h
- Orig date:
Thu Jan 1 02:00:00 1970
diff -u --recursive --new-file v2.1.15/linux/include/asm-sparc64/floppy.h linux/include/asm-sparc64/floppy.h
@@ -0,0 +1,360 @@
+/* $Id: floppy.h,v 1.1 1996/11/20 15:31:07 davem Exp $
+ * asm-sparc64/floppy.h: Sparc specific parts of the Floppy driver.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC64_FLOPPY_H
+#define __ASM_SPARC64_FLOPPY_H
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/idprom.h>
+#include <asm/machines.h>
+#include <asm/oplib.h>
+#include <asm/auxio.h>
+#include <asm/irq.h>
+
+/* References:
+ * 1) Netbsd Sun floppy driver.
+ * 2) NCR 82077 controller manual
+ * 3) Intel 82077 controller manual
+ */
+struct sun_flpy_controller {
+ volatile unsigned char status_82072; /* Main Status reg. */
+#define dcr_82072 status_82072 /* Digital Control reg. */
+#define status1_82077 status_82072 /* Auxiliary Status reg. 1 */
+
+ volatile unsigned char data_82072; /* Data fifo. */
+#define status2_82077 data_82072 /* Auxiliary Status reg. 2 */
+
+ volatile unsigned char dor_82077; /* Digital Output reg. */
+ volatile unsigned char tapectl_82077; /* What the? Tape control reg? */
+
+ volatile unsigned char status_82077; /* Main Status Register. */
+#define drs_82077 status_82077 /* Digital Rate Select reg. */
+
+ volatile unsigned char data_82077; /* Data fifo. */
+ volatile unsigned char ___unused;
+ volatile unsigned char dir_82077; /* Digital Input reg. */
+#define dcr_82077 dir_82077 /* Config Control reg. */
+};
+
+/* You'll only ever find one controller on a SparcStation anyways. */
+static struct sun_flpy_controller *sun_fdc = NULL;
+volatile unsigned char *fdc_status;
+
+struct sun_floppy_ops {
+ unsigned char (*fd_inb)(int port);
+ void (*fd_outb)(unsigned char value, int port);
+};
+
+static struct sun_floppy_ops sun_fdops;
+
+#define fd_inb(port) sun_fdops.fd_inb(port)
+#define fd_outb(value,port) sun_fdops.fd_outb(value,port)
+#define fd_enable_dma() sun_fd_enable_dma()
+#define fd_disable_dma() sun_fd_disable_dma()
+#define fd_request_dma() (0) /* nothing... */
+#define fd_free_dma() /* nothing... */
+#define fd_clear_dma_ff() /* nothing... */
+#define fd_set_dma_mode(mode) sun_fd_set_dma_mode(mode)
+#define fd_set_dma_addr(addr) sun_fd_set_dma_addr(addr)
+#define fd_set_dma_count(count) sun_fd_set_dma_count(count)
+#define fd_enable_irq() /* nothing... */
+#define fd_disable_irq() /* nothing... */
+#define fd_cacheflush(addr, size) /* nothing... */
+#define fd_request_irq() sun_fd_request_irq()
+#define fd_free_irq() /* nothing... */
+#if 0 /* P3: added by Alain, these cause a MMU corruption. 19960524 XXX */
+#define fd_dma_mem_alloc(size) ((unsigned long) vmalloc(size))
+#define fd_dma_mem_free(addr,size) (vfree((void *)(addr)))
+#endif
+
+#define FLOPPY_MOTOR_MASK 0x10
+
+/* It's all the same... */
+#define virt_to_bus(x) (x)
+#define bus_to_virt(x) (x)
+
+/* XXX This isn't really correct. XXX */
+#define get_dma_residue(x) (0)
+
+#define FLOPPY0_TYPE 4
+#define FLOPPY1_TYPE 0
+
+/* Super paranoid... */
+#undef HAVE_DISABLE_HLT
+
+/* Here is where we catch the floppy driver trying to initialize,
+ * therefore this is where we call the PROM device tree probing
+ * routine etc. on the Sparc.
+ */
+#define FDC1 sun_floppy_init()
+
+static int FDC2=-1;
+
+#define N_FDC 1
+#define N_DRIVE 8
+
+/* No 64k boundary crossing problems on the Sparc. */
+#define CROSS_64KB(a,s) (0)
+
+/* Routines unique to each controller type on a Sun. */
+static unsigned char sun_82072_fd_inb(int port)
+{
+ switch(port & 7) {
+ default:
+ printk("floppy: Asked to read unknown port %d\n", port);
+ panic("floppy: Port bolixed.");
+ case 4: /* FD_STATUS */
+ return sun_fdc->status_82072 & ~STATUS_DMA;
+ case 5: /* FD_DATA */
+ return sun_fdc->data_82072;
+ case 7: /* FD_DIR */
+ return (*AUXREG & AUXIO_FLPY_DCHG)? 0x80: 0;
+ };
+ panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun_82072_fd_outb(unsigned char value, int port)
+{
+ switch(port & 7) {
+ default:
+ printk("floppy: Asked to write to unknown port %d\n", port);
+ panic("floppy: Port bolixed.");
+ case 2: /* FD_DOR */
+ /* Oh geese, 82072 on the Sun has no DOR register,
+ * the functionality is implemented via the AUXIO
+ * I/O register. So we must emulate the behavior.
+ *
+ * ASSUMPTIONS: There will only ever be one floppy
+ * drive attached to a Sun controller
+ * and it will be at drive zero.
+ */
+ {
+ unsigned bits = 0;
+ if (value & 0x10) bits |= AUXIO_FLPY_DSEL;
+ if ((value & 0x80) == 0) bits |= AUXIO_FLPY_EJCT;
+ set_auxio(bits, (~bits) & (AUXIO_FLPY_DSEL|AUXIO_FLPY_EJCT));
+ }
+ break;
+ case 5: /* FD_DATA */
+ sun_fdc->data_82072 = value;
+ break;
+ case 7: /* FD_DCR */
+ sun_fdc->dcr_82072 = value;
+ break;
+ case 4: /* FD_STATUS */
+ sun_fdc->status_82072 = value;
+ break;
+ };
+ return;
+}
+
+static unsigned char sun_82077_fd_inb(int port)
+{
+ switch(port & 7) {
+ default:
+ printk("floppy: Asked to read unknown port %d\n", port);
+ panic("floppy: Port bolixed.");
+ case 4: /* FD_STATUS */
+ return sun_fdc->status_82077 & ~STATUS_DMA;
+ case 5: /* FD_DATA */
+ return sun_fdc->data_82077;
+ case 7: /* FD_DIR */
+ /* XXX: Is DCL on 0x80 in sun4m? */
+ return sun_fdc->dir_82077;
+ };
+ panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun_82077_fd_outb(unsigned char value, int port)
+{
+ switch(port & 7) {
+ default:
+ printk("floppy: Asked to write to unknown port %d\n", port);
+ panic("floppy: Port bolixed.");
+ case 2: /* FD_DOR */
+ /* Happily, the 82077 has a real DOR register. */
+ sun_fdc->dor_82077 = value;
+ break;
+ case 5: /* FD_DATA */
+ sun_fdc->data_82077 = value;
+ break;
+ case 7: /* FD_DCR */
+ sun_fdc->dcr_82077 = value;
+ break;
+ case 4: /* FD_STATUS */
+ sun_fdc->status_82077 = value;
+ break;
+ };
+ return;
+}
+
+/* For pseudo-dma (Sun floppy drives have no real DMA available to
+ * them so we must eat the data fifo bytes directly ourselves) we have
+ * three state variables. doing_pdma tells our inline low-level
+ * assembly floppy interrupt entry point whether it should sit and eat
+ * bytes from the fifo or just transfer control up to the higher level
+ * floppy interrupt c-code. I tried very hard but I could not get the
+ * pseudo-dma to work in c-code without getting many overruns and
+ * underruns. If non-zero, doing_pdma encodes the direction of
+ * the transfer for debugging. 1=read 2=write
+ */
+char *pdma_vaddr;
+unsigned long pdma_size;
+volatile int doing_pdma = 0;
+
+/* This is software state */
+char *pdma_base = 0;
+unsigned long pdma_areasize;
+
+/* Common routines to all controller types on the Sparc. */
+static __inline__ void virtual_dma_init(void)
+{
+ /* nothing... */
+}
+
+static __inline__ void sun_fd_disable_dma(void)
+{
+ doing_pdma = 0;
+ if (pdma_base) {
+ mmu_unlockarea(pdma_base, pdma_areasize);
+ pdma_base = 0;
+ }
+}
+
+static __inline__ void sun_fd_set_dma_mode(int mode)
+{
+ switch(mode) {
+ case DMA_MODE_READ:
+ doing_pdma = 1;
+ break;
+ case DMA_MODE_WRITE:
+ doing_pdma = 2;
+ break;
+ default:
+ printk("Unknown dma mode %d\n", mode);
+ panic("floppy: Giving up...");
+ }
+}
+
+static __inline__ void sun_fd_set_dma_addr(char *buffer)
+{
+ pdma_vaddr = buffer;
+}
+
+static __inline__ void sun_fd_set_dma_count(int length)
+{
+ pdma_size = length;
+}
+
+static __inline__ void sun_fd_enable_dma(void)
+{
+ pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
+ pdma_base = pdma_vaddr;
+ pdma_areasize = pdma_size;
+}
+
+/* Our low-level entry point in arch/sparc/kernel/entry.S */
+extern void floppy_hardint(int irq, void *unused, struct pt_regs *regs);
+
+static int sun_fd_request_irq(void)
+{
+ static int once = 0;
+ int error;
+
+ if(!once) {
+ once = 1;
+ error = request_fast_irq(FLOPPY_IRQ, floppy_hardint, SA_INTERRUPT, "floppy");
+ return ((error == 0) ? 0 : -1);
+ } else return 0;
+}
+
+static struct linux_prom_registers fd_regs[2];
+
+static int sun_floppy_init(void)
+{
+ char state[128];
+ int tnode, fd_node, num_regs;
+
+ use_virtual_dma = 1;
+
+ FLOPPY_IRQ = 11;
+ /* Forget it if we aren't on a machine that could possibly
+ * ever have a floppy drive.
+ */
+ if((sparc_cpu_model != sun4c && sparc_cpu_model != sun4m) ||
+ ((idprom->id_machtype == (SM_SUN4C | SM_4C_SLC)) ||
+ (idprom->id_machtype == (SM_SUN4C | SM_4C_ELC)))) {
+ /* We certainly don't have a floppy controller. */
+ goto no_sun_fdc;
+ }
+ /* Well, try to find one. */
+ tnode = prom_getchild(prom_root_node);
+ fd_node = prom_searchsiblings(tnode, "obio");
+ if(fd_node != 0) {
+ tnode = prom_getchild(fd_node);
+ fd_node = prom_searchsiblings(tnode, "SUNW,fdtwo");
+ } else {
+ fd_node = prom_searchsiblings(tnode, "fd");
+ }
+ if(fd_node == 0) {
+ goto no_sun_fdc;
+ }
+
+ /* The sun4m lets us know if the controller is actually usable. */
+ if(sparc_cpu_model == sun4m) {
+ prom_getproperty(fd_node, "status", state, sizeof(state));
+ if(!strcmp(state, "disabled")) {
+ goto no_sun_fdc;
+ }
+ }
+ num_regs = prom_getproperty(fd_node, "reg", (char *) fd_regs, sizeof(fd_regs));
+ num_regs = (num_regs / sizeof(fd_regs[0]));
+ prom_apply_obio_ranges(fd_regs, num_regs);
+ sun_fdc = (struct sun_flpy_controller *) sparc_alloc_io(fd_regs[0].phys_addr,
+ 0x0,
+ fd_regs[0].reg_size,
+ "floppy",
+ fd_regs[0].which_io,
+ 0x0);
+ /* Last minute sanity check... */
+ if(sun_fdc->status_82072 == 0xff) {
+ sun_fdc = NULL;
+ goto no_sun_fdc;
+ }
+
+ if(sparc_cpu_model == sun4c) {
+ sun_fdops.fd_inb = sun_82072_fd_inb;
+ sun_fdops.fd_outb = sun_82072_fd_outb;
+ fdc_status = &sun_fdc->status_82072;
+ /* printk("AUXIO @0x%p\n", auxio_register); */ /* P3 */
+ } else {
+ sun_fdops.fd_inb = sun_82077_fd_inb;
+ sun_fdops.fd_outb = sun_82077_fd_outb;
+ fdc_status = &sun_fdc->status_82077;
+ /* printk("DOR @0x%p\n", &sun_fdc->dor_82077); */ /* P3 */
+ }
+
+ /* Success... */
+ return (int) sun_fdc;
+
+no_sun_fdc:
+ return -1;
+}
+
+static int sparc_eject(void)
+{
+ set_dor(0x00, 0xff, 0x90);
+ udelay(500);
+ set_dor(0x00, 0x6f, 0x00);
+ udelay(500);
+ return 0;
+}
+
+#define fd_eject(drive) sparc_eject()
+
+#endif /* !(__ASM_SPARC64_FLOPPY_H) */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov