ipsecme T. Reddy Internet-Draft Nokia Intended status: Standards Track V. Smyslov Expires: 24 April 2025 ELVIS-PLUS S. Fluhrer Cisco Systems 21 October 2024 Signature Authentication in the Internet Key Exchange Version 2 (IKEv2) using PQC draft-reddy-ipsecme-ikev2-pqc-auth-02 Abstract Signature-based authentication methods are utilized in IKEv2 [RFC7296]. The current version of the Internet Key Exchange Version 2 (IKEv2) protocol supports traditional digital signatures. This document outlines how post-quantum digital signatures, specifically Module-Lattice-Based Digital Signatures (ML-DSA) and Stateless Hash-Based Digital Signatures (SLH-DSA), can be employed as authentication methods within the IKEv2 protocol. It introduces ML- DSA and SLH-DSA capability to IKEv2 without necessitating any alterations to existing IKE operations. About This Document This note is to be removed before publishing as an RFC. Status information for this document may be found at https://datatracker.ietf.org/doc/draft-reddy-ipsecme-ikev2-pqc/. Discussion of this document takes place on the ipsecme Working Group mailing list (mailto:ipsecme@ietf.org), which is archived at https://mailarchive.ietf.org/arch/browse/ipsec/. Subscribe at https://www.ietf.org/mailman/listinfo/ipsecme/. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Reddy, et al. Expires 24 April 2025 [Page 1] Internet-Draft Signature Authentication in IKEv2 using October 2024 Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 24 April 2025. Copyright Notice Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Conventions and Definitions . . . . . . . . . . . . . . . . . 3 3. Specifying ML-DSA within IKEv2 . . . . . . . . . . . . . . . 4 4. Specifying SLH-DSA within IKEv2 . . . . . . . . . . . . . . . 4 5. Signature Algorithm Use and Hashing in IKEv2 with ML-DSA and SLH-DSA . . . . . . . . . . . . . . . . . . . . . . . . . 5 6. Mechanisms for Signaling Supported Key Pair Types . . . . . . 6 7. Security Considerations . . . . . . . . . . . . . . . . . . . 7 Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 7 References . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Normative References . . . . . . . . . . . . . . . . . . . . . 7 Informative References . . . . . . . . . . . . . . . . . . . . 8 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 9 1. Introduction The Internet Key Exchange, or IKEv2 [RFC7296], is a key agreement and security negotiation protocol; it is used for key establishment in IPsec. In the initial set of exchanges, both parties independently select and use their preferred authentication method, which may even differ between the initiator and the responder. In IKEv2, it occurs in the exchange called IKE_AUTH. One option for the authentication method is digital signatures using public key cryptography. Currently, traditional digital signatures are defined for use within IKE_AUTH: RSA signatures, Digital Signature Algorithm (DSA) Digital Reddy, et al. Expires 24 April 2025 [Page 2] Internet-Draft Signature Authentication in IKEv2 using October 2024 Signature Standard (DSS) and ECDSA. The presence of a Cryptographically Relevant Quantum Computer (CRQC) would render state-of-the-art traditional public-key algorithms obsolete and insecure. This is because the assumptions about the intractability of the mathematical problems these algorithms rely on, which offer confident levels of security today, no longer apply in the presence of a CRQC. Consequently, there is a requirement to update protocols and infrastructure to use post-quantum algorithms. Post-quantum algorithms are public-key algorithms designed to be secure against CRQCs as well as classical computers. The traditional cryptographic primitives that need to be replaced by PQC algorithms are discussed in [I-D.ietf-pquip-pqc-engineers]. Module-Lattice-Based Digital Signatures (ML-DSA) [FIPS204] and Stateless Hash-Based Digital Signatures (SLH-DSA) [FIPS205] are quantum-resistant digital signature schemes standardized by the US National Institute of Standards and Technology (NIST) PQC project. This document specifies the use of the ML-DSA and SLH-DSA algorithms in IKEv2. 2. Conventions and Definitions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. This document uses terms defined in [I-D.ietf-pquip-pqt-hybrid-terminology]. For the purposes of this document, it is helpful to be able to divide cryptographic algorithms into two classes: "Asymmetric Traditional Cryptographic Algorithm": An asymmetric cryptographic algorithm based on integer factorisation, finite field discrete logarithms or elliptic curve discrete logarithms, elliptic curve discrete logarithms, or related mathematical problems. "Post-Quantum Algorithm": An asymmetric cryptographic algorithm that is believed to be secure against attacks using quantum computers as well as classical computers. Post-quantum algorithms can also be called quantum-resistant or quantum-safe algorithms. Examples of quantum-resistant digital signature schemes include ML-DSA and SLH- DSA. Reddy, et al. Expires 24 April 2025 [Page 3] Internet-Draft Signature Authentication in IKEv2 using October 2024 3. Specifying ML-DSA within IKEv2 ML-DSA [FIPS204] is a digital signature algorithm (part of the CRYSTALS suite) based on the hardness lattice problems over module lattices (i.e., the Module Learning with Errors problem (MLWE)). The design of the algorithm is based on the "Fiat-Shamir with Aborts" [Lyu09] framework introduced by Lyubashevsky, that leverages rejection sampling to render lattice based FS schemes compact and secure. ML-DSA uses uniform distribution over small integers for computing coefficients in error vectors, which makes the scheme easier to implement. ML-DSA is instantiated with 3 parameter sets for the security categories 2, 3 and 5. Security properties of ML-DSA are discussed in Section 9 of [I-D.ietf-lamps-dilithium-certificates]. This document specifies the use of the ML-DSA algorithm in IKEv2 at three security levels: ML-DSA-44, ML-DSA-65, and ML-DSA-87. 4. Specifying SLH-DSA within IKEv2 SLH-DSA [FIPS205] utilizes the concept of stateless hash-based signatures. In contrast to stateful signature algorithms, SLH-DSA eliminates the need for maintaining state information during the signing process. SLH-DSA is designed to sign up to 2^64 messages and it offers three security levels. The parameters for each of the security levels were chosen to provide 128 bits of security, 192 bits of security, and 256 bits of security. This document specifies the use of the SLH-DSA algorithm in IKEv2 at three security levels. It includes the small (S) or fast (F) versions of the algorithm and allows for the use of either SHA-256 [FIPS180] or SHAKE256 [FIPS202] as the hash function. The small version prioritizes smaller signature sizes, making them suitable for resource-constrained environments IoT devices. Conversely, the fast version prioritizes speed over signature size, minimizing the time required to generate and verify signatures. On the other hand, ML-DSA outperforms SLH-DSA in both signature generation and validation time, as well as signature size. SLH-DSA, in contrast, offers smaller key sizes but larger signature sizes. The following combinations are defined in SLH-DSA [FIPS205]: * SLH-DSA-128S-SHA2 * SLH-DSA-128F-SHA2 * SLH-DSA-192S-SHA2 * SLH-DSA-192F-SHA2 Reddy, et al. Expires 24 April 2025 [Page 4] Internet-Draft Signature Authentication in IKEv2 using October 2024 * SLH-DSA-256S-SHA2 * SLH-DSA-256F-SHA2 * SLH-DSA-128S-SHAKE * SLH-DSA-128F-SHAKE * SLH-DSA-192S-SHAKE * SLH-DSA-192F-SHAKE * SLH-DSA-256S-SHAKE * SLH-DSA-256F-SHAKE SLH-DSA does not introduce a new hardness assumption beyond those inherent to the underlying hash functions. It builds upon established foundations in cryptography, making it a reliable and robust digital signature scheme for a post-quantum world. While attacks on lattice-based schemes like ML-DSA can compromise their security, SLH-DSA will remain unaffected by these attacks due to its distinct mathematical foundations. This ensures the continued security of systems and protocols that utilize SLH-DSA for digital signatures. 5. Signature Algorithm Use and Hashing in IKEv2 with ML-DSA and SLH-DSA Both ML-DSA and SLH-DSA offer deterministic and randomized signing options. By default, ML-DSA uses a non-deterministic approach, where the private random seed rho' is derived pseudorandomly from the signer’s private key, the message, and a 256-bit string, rnd, generated by an approved Random Bit Generator (RBG). In the deterministic version, rnd is instead a constant 256-bit string. Similarly, SLH-DSA can be deterministic or randomized, depending on whether opt_rand is set to a fixed value or a random one. When opt_rand is set to a public seed (from the public key), SLH-DSA produces deterministic signatures, meaning signing the same message twice will result in the same signature. In the context of signature-based authentication in IKEv2, the data used for generating a digital signature is unique for each IKEv2 session, as it includes session-specific information like nonces, cryptographic parameters, and identifiers. Thus, both ML-DSA and SLH-DSA can utilize their deterministic versions when used within IKEv2. In both cases, the 'context' input parameter for the signature generation algorithm is set to an empty string. Reddy, et al. Expires 24 April 2025 [Page 5] Internet-Draft Signature Authentication in IKEv2 using October 2024 IKEv2 can use arbitrary signature algorithms as described in [RFC7427], where the "Digital Signature" authentication method supersedes previously defined signature authentication methods. The three security levels of ML-DSA are identified via AlgorithmIdentifier ASN.1 objects, as specified in [I-D.ietf-lamps-dilithium-certificates]. The different combinations of SLH-DSA are identified via AlgorithmIdentifier ASN.1 objects, as specified in [I-D.ietf-lamps-cms-sphincs-plus]. Both ML-DSA and SLH- DSA define two signature modes: pure mode and pre-hash mode, as specified in [FIPS204] and [FIPS205], respectively. This document specifies only the use of pure mode for signature-based authentication in IKEv2, where the content is signed directly along with some domain separation information. In pre-hash mode, a digest of the message is signed instead. Both [FIPS204] and [FIPS205] prefer pure mode over pre-hash mode, and neither [I-D.ietf-lamps-dilithium-certificates] nor [I-D.ietf-lamps-cms-sphincs-plus] discusses pre-hash mode. The data signed to prove the identity of the initiator and responder (as discussed in Section 2.15 of [RFC7427]) typically fits within the memory constraints of the devices involved in the IKEv2 exchange, consisting of nonces, SPIs, and the initial exchange messages, which are manageable in size. 6. Mechanisms for Signaling Supported Key Pair Types The following mechanisms can be used by peers to signal the types of public/private key pairs they possess: * One method to ascertain that the key pair type the initiator wants the responder to use is through a Certificate Request payload sent by the initiator. For example, the initiator could indicate in the Certificate Request payload that it trusts a certificate authority certificate signed by an ML-DSA or SLH-DSA key. This indication implies that the initiator can process ML-DSA or SLH- DSA signatures, which means that the responder can use ML-DSA or SLH-DSA keys when authenticating. Reddy, et al. Expires 24 April 2025 [Page 6] Internet-Draft Signature Authentication in IKEv2 using October 2024 * Another method is to leverage [I-D.ietf-ipsecme-ikev2-auth-announce] that allows peers to announce their supported authentication methods. It improves interoperability when IKEv2 partners are configured with multiple credentials of different type to authenticate each other. The responder includes a SUPPORTED_AUTH_METHODS notification in the IKE_SA_INIT response message containing the PQC digital signature scheme(s) it supports. The initiator includes the SUPPORTED_AUTH_METHODS notification in either the IKE_AUTH request message or in the IKE_INTERMEDIATE request. This notification lists the PQC digital signature scheme(s) supported by the initiator, ordered by preference. 7. Security Considerations ML-DSA and SLH-DSA are modeled under existentially unforgeable digital signatures with respect to an adaptive chosen message attack (EUF-CMA). ML-DSA-44, ML-DSA-65, and ML-DSA-87 are designed to offer security comparable with the SHA-256/SHA3-256, AES-192, and AES-256 respectively. Similarly, SLH-DSA-128{S,F}-{SHA2,SHAKE}, SLH-DSA- 192{S,F}-{SHA2,SHAKE}, and SLH-DSA-256{S,F}-{SHA2,SHAKE} are designed to offer security comparable with the AES-128, AES-192, and AES-256 respectively. The Security Considerations section of [I-D.ietf-lamps-dilithium-certificates] and [I-D.ietf-lamps-cms-sphincs-plus] applies to this specification as well. Acknowledgements Thanks to Stefaan De Cnodder for the discussion and comments. References Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC7427] Kivinen, T. and J. Snyder, "Signature Authentication in the Internet Key Exchange Version 2 (IKEv2)", RFC 7427, DOI 10.17487/RFC7427, January 2015, . Reddy, et al. Expires 24 April 2025 [Page 7] Internet-Draft Signature Authentication in IKEv2 using October 2024 [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . Informative References [FIPS180] "NIST, Secure Hash Standard (SHS), FIPS PUB 180-4, August 2015", . [FIPS202] "NIST, SHA-3 Standard: Permutation-Based Hash and Extendable-Output Functions, FIPS PUB 202, August 2015.", . [FIPS204] "FIPS 204: Module-Lattice-Based Digital Signature Standard", . [FIPS205] "FIPS 205: Stateless Hash-Based Digital Signature Standard", . [I-D.ietf-ipsecme-ikev2-auth-announce] Smyslov, V., "Announcing Supported Authentication Methods in IKEv2", Work in Progress, Internet-Draft, draft-ietf- ipsecme-ikev2-auth-announce-10, 18 April 2024, . [I-D.ietf-lamps-cms-sphincs-plus] Housley, R., Fluhrer, S., Kampanakis, P., and B. Westerbaan, "Use of the SLH-DSA Signature Algorithm in the Cryptographic Message Syntax (CMS)", Work in Progress, Internet-Draft, draft-ietf-lamps-cms-sphincs-plus-09, 21 August 2024, . [I-D.ietf-lamps-dilithium-certificates] Massimo, J., Kampanakis, P., Turner, S., and B. Westerbaan, "Internet X.509 Public Key Infrastructure: Algorithm Identifiers for ML-DSA", Work in Progress, Internet-Draft, draft-ietf-lamps-dilithium-certificates- 04, 22 July 2024, . Reddy, et al. Expires 24 April 2025 [Page 8] Internet-Draft Signature Authentication in IKEv2 using October 2024 [I-D.ietf-pquip-pqc-engineers] Banerjee, A., Reddy.K, T., Schoinianakis, D., Hollebeek, T., and M. Ounsworth, "Post-Quantum Cryptography for Engineers", Work in Progress, Internet-Draft, draft-ietf- pquip-pqc-engineers-05, 12 September 2024, . [I-D.ietf-pquip-pqt-hybrid-terminology] D, F., P, M., and B. Hale, "Terminology for Post-Quantum Traditional Hybrid Schemes", Work in Progress, Internet- Draft, draft-ietf-pquip-pqt-hybrid-terminology-04, 10 September 2024, . [Lyu09] "V. Lyubashevsky, “Fiat-Shamir With Aborts: Applications to Lattice and Factoring-Based Signatures“, ASIACRYPT 2009", . [RFC7296] Kaufman, C., Hoffman, P., Nir, Y., Eronen, P., and T. Kivinen, "Internet Key Exchange Protocol Version 2 (IKEv2)", STD 79, RFC 7296, DOI 10.17487/RFC7296, October 2014, . Authors' Addresses Tirumaleswar Reddy Nokia Bangalore Karnataka India Email: kondtir@gmail.com Valery Smyslov ELVIS-PLUS Russian Federation Email: svan@elvis.ru Scott Fluhrer Cisco Systems Email: sfluhrer@cisco.com Reddy, et al. Expires 24 April 2025 [Page 9]