Internet-Draft | dCBOR | August 2024 |
McNally, et al. | Expires 8 February 2025 | [Page] |
The purpose of determinism is to ensure that semantically equivalent data items are encoded into identical byte streams. CBOR (RFC 8949) defines "Deterministically Encoded CBOR" in its Section 4.2, but leaves some important choices up to the application developer. The CBOR Common Deterministic Encoding (CDE) Internet Draft builds on this by specifying a baseline for application profiles that wish to implement deterministic encoding with CBOR. The present document provides an application profile "dCBOR" that can be used to help achieve interoperable deterministic encoding based on CDE for a variety of applications wishing an even narrower and clearly defined set of choices.¶
This note is to be removed before publishing as an RFC.¶
Status information for this document may be found at https://datatracker.ietf.org/doc/draft-mcnally-deterministic-cbor/.¶
Source for this draft and an issue tracker can be found at https://github.com/BlockchainCommons/WIPs-IETF-draft-deterministic-cbor.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 8 February 2025.¶
Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
CBOR [RFC8949] has many advantages over other data serialization formats. One of its strengths is specifications and guidelines for serializing data deterministically, such that multiple agents serializing the same data automatically achieve consensus on the exact byte-level form of that serialized data. This is particularly useful when data must be compared for semantic equivalence by comparing the hash of its contents.¶
Nonetheless, determinism is an opt-in feature of CBOR, and most existing CBOR codecs put the primary burden of correct deterministic serialization and validation of deterministic encoding during deserialization on the engineer. Furthermore, the specification leaves a number of important decisions around determinism up to the application developer. The CBOR Common Deterministic Encoding (CDE) Internet Draft [CDE] builds on the basic CBOR specification by providing a baseline for application profiles that wish to implement deterministic encoding with CBOR.¶
This document narrows CDE further into a set of requirements for the application profile "dCBOR". These requirements include but go beyond CDE, including requiring that dCBOR decoders validate that encoded CDE conforms to the requirements of this document.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
The dCBOR Application Profile specifies the use of Deterministic Encoding as defined in [CDE] and adds several exclusions and reductions specified in this section.¶
Just as CDE does not "fork" CBOR, the rules specified here do not "fork" CDE: A dCBOR implementation produces well-formed, deterministically encoded CDE according to [CDE], and existing CBOR or CDE decoders will therefore be able to decode it. Similarly, CBOR or CDE encoders will be able to produce valid dCBOR if handed dCBOR conforming data model level information from an application.¶
Note that the separation between standard CBOR or CDE processing and the processing required by the dCBOR application profile is a conceptual one: Both dCBOR processing and standard CDE/CBOR processing may be combined into a unified dCBOR/CDE/CBOR codec. The requirements in this document apply to encoding or decoding of dCBOR data, regardless of whether the codec is a unified dCBOR/CDE/CBOR codec operating in dCBOR-compliant modes, or a single-purpose dCBOR codec. Both of these are generically referred to as "dCBOR codecs" in this document.¶
This application profile is intended to be used in conjunction with an application, which typically will use a subset of CDE/CBOR, which in turn influences which subset of the application profile is used. As a result, this application profile places no direct requirement on what subset of CDE/CBOR is implemented. For instance, there is no requirement that dCBOR implementations support floating point numbers (or any other kind of non-basic integer type, such as arbitrary precision integers or complex numbers) when they are used with applications that do not use them. However, this document does place requirements on dCBOR implementations that support negative 64-bit integers and 64-bit or smaller floating point numbers.¶
dCBOR encoders:¶
dCBOR decoders:¶
CBOR [RFC8949] defines maps with duplicate keys as invalid, but leaves how to handle such cases to the implementor (§2.2, §3.1, §5.4, §5.6). [CDE] provides no additional mandates on this issue.¶
dCBOR encoders:¶
dCBOR decoders:¶
The purpose of determinism is to ensure that semantically equivalent data items are encoded into identical byte streams. Numeric reduction ensures that semantically equal numeric values (e.g. 2
and 2.0
) are encoded into identical byte streams (e.g. 0x02
) by encoding "Integral floating point values" (floating point values with a zero fractional part) as integers when possible.¶
dCBOR implementations that support floating point numbers:¶
MUST check whether floating point values to be encoded have the numerically equal value in DCBOR_INT
= [-263, 264-1]. If that is the case, it MUST be converted to that numerically equal integer value before encoding it. (Preferred encoding will then ensure the shortest length encoding is used.) If a floating point value has a non-zero fractional part, or an exponent that takes it out of DCBOR_INT
, the original floating point value is used for encoding. (Specifically, conversion to a CBOR bignum is never considered.)¶
This also means that the three representations of a zero number in CBOR (0
, 0.0
, -0.0
in diagnostic notation) are all reduced to the basic integer 0
(with preferred encoding 0x00
).¶
0xf97e00
.¶
dCBOR decoders that support floating point numbers:¶
Only the three "simple" (major type 7) values false
(0xf4), true
(0xf5), and null
(0xf6) and the floating point values are valid in dCBOR.¶
dCBOR encoders:¶
false
, true
, null
, and the floating point values.¶
dCBOR decoders:¶
false
, true
, null
, and the floating point values.¶
Similar to the CDDL [RFC8610] support in CDE [CDE], this specification adds two CDDL control operators that can be used to specify that the data items should be encoded in CBOR Common Deterministic Encoding (CDE), with the dCBOR application profile applied as well.¶
The control operators .dcbor
and .dcborseq
are exactly like .cde
and .cdeseq
except that they also require the encoded data item(s) to conform to the dCBOR application profile.¶
Tag 201 (Section 6) is defined in this specification as a way to declare its tag content to conform to the dCBOR application profile at the data model level. As a result, when this data item is encoded using CDE rules, the encoded result will conform to dCBOR also at the encoded data item level. (In conjunction with this semantics, tag 201 may also be employed as a boundary marker leading from an overall structure to specific application data items; see Section 3 of [GordianEnvelope] for an example for this usage.)¶
This section is to be removed before publishing as an RFC.¶
(Boilerplate as per Section 2.1 of [RFC7942]:)¶
This section records the status of known implementations of the protocol defined by this specification at the time of posting of this Internet-Draft, and is based on a proposal described in [RFC7942]. The description of implementations in this section is intended to assist the IETF in its decision processes in progressing drafts to RFCs. Please note that the listing of any individual implementation here does not imply endorsement by the IETF. Furthermore, no effort has been spent to verify the information presented here that was supplied by IETF contributors. This is not intended as, and must not be construed to be, a catalog of available implementations or their features. Readers are advised to note that other implementations may exist.¶
According to [RFC7942], "this will allow reviewers and working groups to assign due consideration to documents that have the benefit of running code, which may serve as evidence of valuable experimentation and feedback that have made the implemented protocols more mature. It is up to the individual working groups to use this information as they see fit".¶
This document inherits the security considerations of CBOR [RFC8949].¶
Vulnerabilities regarding dCBOR will revolve around whether an attacker can find value in producing semantically equivalent documents that are nonetheless serialized into non-identical byte streams. Such documents could be used to contain malicious payloads or exfiltrate sensitive data. The ability to create such documents could indicate the failure of a dCBOR decoder to correctly validate according to this document, or the failure of the developer to properly specify or implement application protocol requirements using dCBOR. Whether these possibilities present an identifiable attack surface is a question that developers should consider.¶
RFC Editor: please replace RFCXXXX with the RFC number of this RFC and remove this note.¶
IANA has registered the following CBOR tag in the "CBOR Tags" registry of [IANACBORTAGS]:¶
Tag | Data Item | Semantics | Reference |
---|---|---|---|
#201 | (any) | enclosed dCBOR | [RFCXXXX] |
This document requests IANA to register the contents of Table 1 into the registry "CDDL Control Operators" of [IANACDDL]:¶
Name | Reference |
---|---|
.dcbor | [RFCXXXX] |
.dcborseq | [RFCXXXX] |
The following tables provide common and edge-case numeric test vectors for dCBOR encoders and decoders, and are intended to exercise the requirements of this specification.¶
Value | dCBOR Encoding | Note |
---|---|---|
0 |
00
|
|
1 |
01
|
|
23 |
17
|
|
24 |
1818
|
|
255 (28 - 1) |
18ff
|
|
65535 (216 - 1) |
19ffff
|
|
65536 (216) |
1a00010000
|
|
4294967295 (232 - 1) |
1affffffff
|
|
4294967296 (232) |
1b0000000100000000
|
|
18446744073709551615 (264 - 1) |
1bffffffffffffffff
|
|
-1 |
20
|
|
-2 |
21
|
|
-127 (-28 - 1) |
387e
|
|
-128 (-27) |
387f
|
|
-32768 (-216) |
397fff
|
|
-2147483648 (-231) |
3a7fffffff
|
|
-9223372036854775808 (-263) |
3b7fffffffffffffff
|
|
1.5 |
f93e00
|
|
2345678.25 |
fa4a0f2b39
|
|
1.2 |
fb3ff3333333333333
|
|
42.0 |
182a
|
Reduced. |
2345678.0 |
1a0023cace
|
Reduced. |
-2345678.0 |
3a0023cacd
|
Reduced. |
-0.0 |
00
|
Reduced. |
5.960464477539063e-08 |
f90001
|
Smallest half-precision subnormal. |
1.401298464324817e-45 |
fa00000001
|
Smallest single subnormal. |
5e-324 |
fb0000000000000001
|
Smallest double subnormal. |
2.2250738585072014e-308 |
fb0010000000000000
|
Smallest double normal. |
6.103515625e-05 |
f90400
|
Smallest half-precision normal. |
65504.0 |
19ffe0
|
Reduced. Largest possible half-precision. |
33554430.0 |
1a01fffffe
|
Reduced. Exponent 24 to test single exponent boundary. |
-9223372036854774784.0 |
3b7ffffffffffffbff
|
Reduced. Most negative double that converts to int64. |
18446744073709550000.0 |
1bfffffffffffff800
|
Reduced. Largest double that can convert to uint64, almost UINT64_MAX. |
18446744073709552000.0 |
fa5f800000
|
Just too large to convert to uint64, but converts to a single, just over UINT64_MAX. |
-18446742974197924000.0 |
fadf7fffff
|
Large negative that converts to float, but too large for int64. |
3.4028234663852886e+38 |
fa7f7fffff
|
Largest possible single. |
3.402823466385289e+38 |
fb47efffffe0000001
|
Slightly larger than largest possible single. |
1.7976931348623157e+308 |
fb7fefffffffffffff
|
Largest double. |
Infinity (any size) |
f97c00
|
Canonicalized. |
-Infinity (any size) |
f9fc00
|
Canonicalized. |
NaN (any size, any payload) |
f97e00
|
Canonicalized. |
These are valid CBOR encodings that MUST be rejected as invalid by a dCBOR-compliant decoder.¶
Value | CBOR Encoding | Reason for Rejection |
---|---|---|
12.0 |
f94a00
|
Can be reduced to 12. |
1.5 |
fb3ff8000000000000
|
Not preferred encoding. |
-9223372036854775809 (-263 - 1) |
3b8000000000000000
|
65-bit negative integer value. |
-18446744073709551616 (-264) |
3bffffffffffffffff
|
65-bit negative integer value. |
Infinity |
fb7ff0000000000000
|
Not preferred encoding. |
Infinity |
fa7f800000
|
Not preferred encoding. |
-Infinity |
fbfff0000000000000
|
Not preferred encoding. |
-Infinity |
faff800000
|
Not preferred encoding. |
NaN |
fb7ff9100000000001
|
Not canonical NaN. |
NaN |
faffc00001
|
Not canonical NaN. |
NaN |
f97e01
|
Not canonical NaN. |
The authors are grateful for the contributions of Joe Hildebrand and Anders Rundgren in the CBOR working group.¶