Network Working Group M. Nayman, Ed. Internet-Draft Juniper Networks Intended status: Standards Track A. Lingala Expires: 4 February 2025 AT&T August 2024 Dynamic Prefix Configuration of MAP-T and MAP-E Parameters via BGP draft-bgp-ext-communities-map-prefixes-00 Abstract This document proposes an extension to the current MAP-T (Mapping of Address and Port using Translation) [RFC7599] and MAP-E (Mapping of Address and Port with Encapsulation) [RFC7597] configuration mechanisms. It allows for dynamically learned and programmed MAP-T or MAP-E prefix value parameters via BGP-learned prefixes marked with extended community attributes, enabling a more flexible and scalable approach compared to static configuration. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 2 February 2025. Copyright Notice Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved. Nayman & Lingala Expires 4 February 2025 [Page 1] Internet-Draft Dynamic Prefix Configuration MAP-T and M August 2024 This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1. Requirements Language . . . . . . . . . . . . . . . . . . 2 1.2. Overview . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Dynamic MAP-T and MAP-E Prefixes Learned via BGP . . . . . . 4 3. References . . . . . . . . . . . . . . . . . . . . . . . . . 5 3.1. Normative References . . . . . . . . . . . . . . . . . . 5 3.2. Informative References . . . . . . . . . . . . . . . . . 6 Appendix A. Acronyms and Abbreviations . . . . . . . . . . . . . 6 Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 7 Contributors . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 7 1. Introduction MAP-T and MAP-E are mechanisms that enable the transition from IPv4 to IPv6 by mapping IPv4 addresses and ports to IPv6 addresses (RFC 7599 and RFC 7597 respectively). The current standard requires static configuration of MAP-T and MAP-E parameters, which can be cumbersome and inflexible in large-scale networks. This document proposes a method to dynamically configure MAP-T and MAP-E parameters using BGP-learned prefixes with extended community attributes, enhancing the efficiency and adaptability of network configurations. 1.1. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] when, and only when, they appear in all capitals, as shown here. Nayman & Lingala Expires 4 February 2025 [Page 2] Internet-Draft Dynamic Prefix Configuration MAP-T and M August 2024 1.2. Overview The proposed solution introduces dynamic MAP-T and MAP-E parameter configuration using BGP-learned prefixes. This approach allows for the dynamic assignment of MAP-T and MAP-E domain-specific parameters, such as the DMR prefix, IPv4 prefix, and MAP-T/MAP-E prefix, based on BGP updates. To facilitate this dynamic configuration, new BGP extended communities will be defined. These communities will be associated with specific softwire concentrators and prefixes: * dmr:{number}:{prefix} * ipv4:{number}:{prefix} * map:{number}:{prefix} This initiative leverages the framework established in RFC 7153 for defining new BGP communities. The new BGP communities are required to indicate where the prefix will be imported and dynamically configured. By associating these communities with specific MAP-T and MAP-E parameters, the BGP updates can precisely control the importation and configuration of these prefixes within the network. This ensures that the dynamic parameters are applied accurately and efficiently, allowing for real-time adaptability to network changes. The community attribute dmr refers to the DMR prefix (Softwire DMR IPv6 Address). The community attribute ipv4 refers to the MAP-T/ MAP-E domain's rule IPv4 prefix/length. The community attribute map refers to the MAP-T/MAP-E domain's rule IPv6 prefix/length. The {number} refers to the name or number or term of the MAP-T/MAP-E softwire concentrator. Since a MAP-T BR can have multiple MAP-T domains with different prefixes, this helps identify where the prefix will be associated. The {prefix} refers to the actual MAP-T or MAP-E prefix. These extended community attributes are associated with the following Address Family Identifier (AFI) and Subsequent Address Family Identifier (SAFI) combinations as specified in IANA and descbied in [RFC2858] and [RFC4760]. This initiative is OPTIONAL for MAP-T and MAP-E; it is not necessary for them to function. It provides an optional mechanism to enhance the configuration process. Nayman & Lingala Expires 4 February 2025 [Page 3] Internet-Draft Dynamic Prefix Configuration MAP-T and M August 2024 Users can take advantage of BGP-advertised MAP-T and MAP-E parameters by leveraging the newly defined BGP extended communities to dynamically update their configurations. When a BGP route containing one of the specified extended communities (e.g., dmr:{number}:{prefix}, ipv4:{number}:{prefix}, or map:{number}:{prefix}) is received, the router can automatically parse these communities and update the MAP-T/MAP-E configuration accordingly. This approach ensures that the configuration is always up-to-date with the latest network changes, reduces administrative overhead, and enhances scalability by allowing centralized management of MAP-T and MAP-E parameters through BGP. The extended community attributes defined in this document are **Transitive Extended Communities**. This designation is essential because MAP-T and MAP-E parameters need to be propagated across different BGP sessions, ensuring that routers throughout the network can dynamically configure themselves based on these attributes, thus maintaining consistency and efficiency in the network configuration. 2. Dynamic MAP-T and MAP-E Prefixes Learned via BGP The proposed solution introduces dynamic MAP-T and MAP-E parameter configuration using BGP-learned prefixes. This approach allows for the dynamic assignment of MAP-T and MAP-E domain-specific parameters, such as the DMR prefix, IPv4 prefix, and MAP-T/MAP-E prefix, based on BGP updates. To facilitate this dynamic configuration, new BGP extended communities will be defined. These communities will be associated with specific softwire concentrators and prefixes: * dmr:{number}:{prefix} * ipv4:{number}:{prefix} * map:{number}:{prefix} This initiative leverages the framework established in [RFC7153] for defining new BGP communities. The new BGP communities are required to indicate where the prefix will be imported and dynamically configured. By associating these communities with specific MAP-T and MAP-E parameters, the BGP updates can precisely control the importation and configuration of these prefixes within the network. This ensures that the dynamic parameters are applied accurately and efficiently, allowing for real-time adaptability to network changes. Nayman & Lingala Expires 4 February 2025 [Page 4] Internet-Draft Dynamic Prefix Configuration MAP-T and M August 2024 The community attribute dmr refers to the DMR prefix (Softwire DMR IPv6 Address). The community attribute ipv4 refers to the MAP-T/ MAP-E domain's rule IPv4 prefix/length. The community attribute map refers to the MAP-T/MAP-E domain's rule IPv6 prefix/length. The {number} refers to the name or number or term of the MAP-T/MAP-E softwire concentrator. Since a MAP-T BR can have multiple MAP-T domains with different prefixes, this helps identify where the prefix will be associated. The {prefix} refers to the actual MAP-T or MAP-E prefix. These extended community attributes are associated with the following Address Family Identifier (AFI) and Subsequent Address Family Identifier (SAFI) combinations as specified in IANA: * IPv4 Unicast (AFI: 1, SAFI: 1) * IPv6 Unicast (AFI: 2, SAFI: 1) * VPNv4 Unicast (AFI: 1, SAFI: 128) * VPNv6 Unicast (AFI: 2, SAFI: 128) This initiative is OPTIONAL for MAP-T and MAP-E; it is not necessary for them to function. It provides an optional mechanism to enhance the configuration process. Users can take advantage of BGP-advertised MAP-T and MAP-E parameters by leveraging the newly defined BGP extended communities to dynamically update their configurations. When a BGP route containing one of the specified extended communities (e.g., dmr:{number}:{prefix}, ipv4:{number}:{prefix}, or map:{number}:{prefix}) is received, the router can automatically parse these communities and update the MAP-T/MAP-E configuration accordingly. This approach ensures that the configuration is always up-to-date with the latest network changes, reduces administrative overhead, and enhances scalability by allowing centralized management of MAP-T and MAP-E parameters through BGP. The extended community attributes defined in this document are **Transitive Extended Communities**. This designation is essential because MAP-T and MAP-E parameters need to be propagated across different BGP sessions, ensuring that routers throughout the network can dynamically configure themselves based on these attributes, thus maintaining consistency and efficiency in the network configuration. 3. References 3.1. Normative References Nayman & Lingala Expires 4 February 2025 [Page 5] Internet-Draft Dynamic Prefix Configuration MAP-T and M August 2024 [RFC7153] Rosen, E. and Y. Rekhter, "IANA Registries for BGP Extended Communities", RFC 7153, DOI 10.17487/RFC7153, March 2014, . [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC7597] Troan, O., Ed., Dec, W., Li, X., Bao, C., Matsushima, S., Murakami, T., and T. Taylor, Ed., "Mapping of Address and Port with Encapsulation (MAP-E)", RFC 7597, DOI 10.17487/RFC7597, July 2015, . [RFC7599] Li, X., Bao, C., Dec, W., Ed., Troan, O., Matsushima, S., and T. Murakami, "Mapping of Address and Port using Translation (MAP-T)", RFC 7599, DOI 10.17487/RFC7599, July 2015, . 3.2. Informative References [RFC2858] Bates, T., Rekhter, Y., Chandra, R., and D. Katz, "Multiprotocol Extensions for BGP-4", RFC 2858, DOI 10.17487/RFC2858, June 2000, . [RFC4271] Rekhter, Y., Ed., Li, T., Ed., and S. Hares, Ed., "A Border Gateway Protocol 4 (BGP-4)", RFC 4271, DOI 10.17487/RFC4271, January 2006, . [RFC4760] Bates, T., Chandra, R., Katz, D., and Y. Rekhter, "Multiprotocol Extensions for BGP-4", RFC 4760, DOI 10.17487/RFC4760, January 2007, . Appendix A. Acronyms and Abbreviations AFI: Address Family Identifier BGP: Border Gateway Protocol IP: Internet Protocol IPv4: Internet Protocol version 4 IPv6: Internet Protocol version 6 Nayman & Lingala Expires 4 February 2025 [Page 6] Internet-Draft Dynamic Prefix Configuration MAP-T and M August 2024 MAP-T: Mapping of Address and Port using Translation MAP-E: Mapping of Address and Port with Encapsulation NLRI: Network Layer Reachability Information VPN: Virtual Private Network SAFI: Subsequent Address Family Identifier Acknowledgements To be added later Contributors To be added later Authors' Addresses Moshiko Nayman (editor) Juniper Networks 18 Buckingham Dr Manalapan, NJ 07726 United States of America Email: mnayman@juniper.net Avinash Lingala AT&T 12186 Diamond Creek Dr Frisco, TX 75035 United States of America Email: ar977m@example.com Nayman & Lingala Expires 4 February 2025 [Page 7]