____________________________________________________ European Autonomous System Number Appli- cation Form and Supporting Notes P. Caslav, M. Kuehne Document ID: ripe-147 Obsoletes: ripe-109 See also: ripe-140, ripe-181 Part I: The AS Number Application Form This section contains the set of templates to be used when submitting an Autonomous System Number request. This form must be used by Internet Service Providers when submitting a request to the RIPE NCC. Instructions for filling out the templates are found in Part II. Internet Service Providers: Submit the form via e- mail to as an ASCII text docu- ment. (If the ISP is not a Local Internet Registry, the form should be submitted to the upstream provider.) The form must include the Registry's Identifier (X-NCC-RegID) in the e-mail header or at the top of the form. Autonomous System Administrators: Send the form your Internet Service Provider. Warning (If submitted to the RIPE NCC): Requests that are sent to the RIPE NCC which lack a proper Registry Identifier (X-NCC-RegID) will be returned to the sender. Further, any modifications to the templates or missing tem- plates may result in a delay in handling. ____________________________________________________ ripe-147.txt Page 1 European Autonomous System Number Application Form and Support- ing Notes ____________________________________________________ X-NCC-RegID: Does the organisation requesting the AS number have address space that will be originated from the new AS? Please list the prefixes here: If the organisation does not have address space yet, but has a pending request with RIPE NCC hostmasters, please include the ticket number of the request here: #[AUT-NUM TEMPLATE]# aut-num: descr: descr: as-in: as-in: as-out: as-out: default: admin-c: tech-c: remarks: mnt-by: changed: source: RIPE #[MAINTAINER TEMPLATE]# mntner: descr: admin-c: tech-c: upd-to: auth: mnt-by: changed: source: RIPE #[PERSON TEMPLATE]# person: address: address: phone: fax-no: e-mail: nic-hdl: remarks: notify: changed: source: RIPE #[TEMPLATE END]# ____________________________________________________ ripe-147.txt Page 2 European Autonomous System Number Application Form and Support- ing Notes ____________________________________________________ Part II: Supporting Notes for the AS Number Application Form This section provides supporting notes to the Autonomous System Application Form. Please ensure that you read all the information below carefully before submitting your application for an AS Number. For more detailed explanations on routing policy objects please refer to "Representation of IP Rout- ing Policies in a Routing Registry" (ripe-181). For an explanation on when an AS Number is needed and policies and procedures to be followed when request- ing an AS Number please see "Guidelines for cre- ation, selection and registration of an Autonomous System" (RFC 1930), as well as section 7 of "Euro- pean Internet Registry Policies and Procedures" (ripe-140). When sending the completed ripe-147 form to the RIPE NCC, all information requested in the form must be supplied, including the technical routing policy. In some cases, the RIPE NCC will request additional information. When sending the request, please only send the form, not this entire document. Administrative and Technical Information Current assignment guidelines only allow the RIPE NCC to assign AS Numbers to multihomed organisations which need to define their own routing policy. To evaluate the request in this regard, the enterprise will have to provide information on who they will be peering with by specifying a routing policy in the as-in and as-out attributes. The "aut-num:" attributes described below are a min- imal set sufficient to register most common situa- tions. Please consult "Representation of IP Routing Policies in a Routing Registry" (RIPE-181) in the RIPE document store for full details on the syntax of these and other attributes. NOTE: All database objects (such as "mntner:", "as- macro:" or "community:" objects) referenced in the aut-num template should be entered into the database before submitting the request or included on the application form. ____________________________________________________ ripe-147.txt Page 3 European Autonomous System Number Application Form and Support- ing Notes ____________________________________________________ Aut-num Template Fields ------------------------------------------------------- aut-num: Specifies the temporary name of the AS to be assigned. This name is usually needed for the as-out expression below. It is suggested to use NEW. In case multiple ASes are required, NEW1, NEW2, etc can be used. descr: A short description of the Autonomous Sys- tem, including the location; The full postal address is not needed as this is provided in the person template (see below). as-in: Description of accepted routing informa- tion between AS peers. Format: "from accept " Explanation: refers to your AS neighbor. is a positive number used to express a relative cost of routes learned. The lower the cost the more pre- ferred the route. can take the following formats: A list of one or more ASes, AS Macros, Com- munities or Route Lists, or the keyword "ANY". The boolean keyword operators "AND", "OR" or "NOT" can be used with the above expressions. This field is manda- tory, multiple lines are possible. as-out: A description of generated routing infor- mation sent to other AS peers. Format: " announce " Explanation: refers to your AS neighbour. is explained in the "as-in:" attribute defi- nition above. To express the Autonomous System Number that one is applying for, it is possible to use NEW as explained above. This field is mandatory, multiple lines are possible. default: Description of default routes. Format: " " Explanation: refers to your AS neighbour. is a positive number used to express a relative cost of default routes used. The lower the cost the more preferred the route. This field is optional. ____________________________________________________ ripe-147.txt Page 4 European Autonomous System Number Application Form and Support- ing Notes ____________________________________________________ admin-c: The NIC handle of the person who is the administrative contact for the Autonomous System; The administrative contact must be physically located at the site that will be using the AS Number. More than one con- tact can be specified by adding more "admin-c" fields. An explanation on how to obtain a NIC handle can be found in ripe-142. This field is mandatory. tech-c: The NIC handle of the technical contact person; There can be more than one name specified in multiple fields for this tem- plate. This field is mandatory. remarks: Remarks or comments, to be used for clari- fication. This field is optional. mnt-by: References a registered maintainer object, which specifies authorisation checks on changes to the "aut-num:" object in the database. If you want to use the AS Number as part of the maintainer name, just put "NEW" in this space and the RIPE NCC host- master will fill in the number. More information on the database maintainer object can be found in ripe-120. This field is mandatory. changed: The e-mail address of the person complet- ing this form, followed by the date; Spec- ify the date in the format as shown in the example. This field is manda- tory. source: The source of the information. This field will always be RIPE and should already be filled in. This field is mandatory. ____________________________________________________ ripe-147.txt Page 5 European Autonomous System Number Application Form and Support- ing Notes ____________________________________________________ #[AUT-NUM TEMPLATE]# aut-num: NEW descr: NIKHEF-H Autonomous System descr: Science Park Watergraafsmeer descr: Amsterdam as-in: from AS123 100 accept ANY as-in: from AS7432 100 accept AS7432 AND AS1000 as-in: from AS1000 10 accept AS-EBONE as-in: from AS3333 100 accept {195.87.45.0/16, 128.141.0.0/16} as-out: to AS123 announce NEW as-out: to AS7432 announce NEW as-out: to AS1000 announce NEW as-out: to AS3333 announce NEW default: AS123 100 admin-c: PC111-RIPE tech-c: EW21-RIPE mnt-by: NEW-MNT changed: hostmaster@ripe.net 960919 source: RIPE Maintainer Information It is required for each "aut-num:" (autonomous num- ber) object to reference a "mntner:" (maintainer) object. If the maintainer information is already in the database, then the person handling the request should check to see if it is up to date. If there is no database entry, one should now be created by using the following template. Since the maintainer object is described in detail elsewhere ( ripe-120) only an example is included here. #[MAINTAINER TEMPLATE]# mntner: NEW-MNT descr: NIKHEF-H AS Maintainer tech-c: PC111-RIPE admin-c: EW21-RIPE upd-to: hostmaster@ripe.net auth: CRYPT-PW peEw8Gb4xBNqI mnt-by: NEW-MNT changed: hostmaster@ripe.net 960919 source: RIPE ____________________________________________________ ripe-147.txt Page 6 European Autonomous System Number Application Form and Support- ing Notes ____________________________________________________ Contact Information Each "aut-num:" and "mntner:" object references con- tact persons, which also need to be entered in the RIPE database. If the contact information is already in the database, then the person handling the request should check to see if it is up to date. If there is no database entry, one should now be cre- ated by using the following template. Since the per- son object is described in detail elsewhere, (ripe-119 and ripe-142) only an example is given here. #[PERSON TEMPLATE]# person: Paula Caslav address: RIPE Network Coordination Centre (NCC) address: Kruislaan 409 address: NL-1098 SJ Amsterdam address: Netherlands phone: +31 20 592 5065 fax-no: +31 20 592 5090 e-mail: paula@ripe.net nic-hdl: PC111-RIPE notify: paula@ripe.net changed: paula@ripe.net 960731 source: RIPE ____________________________________________________ ripe-147.txt Page 7