This is a purely informative rendering of an RFC that includes verified errata. This rendering may not be used as a reference.
The following 'Verified' errata have been incorporated in this document:
EID 4764
Internet Engineering Task Force (IETF) J. Richer, Ed.
Request for Comments: 7662 October 2015
Category: Standards Track
ISSN: 2070-1721
OAuth 2.0 Token Introspection
Abstract
This specification defines a method for a protected resource to query
an OAuth 2.0 authorization server to determine the active state of an
OAuth 2.0 token and to determine meta-information about this token.
OAuth 2.0 deployments can use this method to convey information about
the authorization context of the token from the authorization server
to the protected resource.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc7662.
Copyright Notice
Copyright (c) 2015 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1. Notational Conventions . . . . . . . . . . . . . . . . . 3
1.2. Terminology . . . . . . . . . . . . . . . . . . . . . . . 3
2. Introspection Endpoint . . . . . . . . . . . . . . . . . . . 3
2.1. Introspection Request . . . . . . . . . . . . . . . . . . 4
2.2. Introspection Response . . . . . . . . . . . . . . . . . 6
2.3. Error Response . . . . . . . . . . . . . . . . . . . . . 8
3. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 9
3.1. OAuth Token Introspection Response Registry . . . . . . . 9
3.1.1. Registration Template . . . . . . . . . . . . . . . . 10
3.1.2. Initial Registry Contents . . . . . . . . . . . . . . 10
4. Security Considerations . . . . . . . . . . . . . . . . . . . 12
5. Privacy Considerations . . . . . . . . . . . . . . . . . . . 14
6. References . . . . . . . . . . . . . . . . . . . . . . . . . 15
6.1. Normative References . . . . . . . . . . . . . . . . . . 15
6.2. Informative References . . . . . . . . . . . . . . . . . 16
Appendix A. Use with Proof-of-Possession Tokens . . . . . . . . 17
Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 17
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 17
1. Introduction
In OAuth 2.0 [RFC6749], the contents of tokens are opaque to clients.
This means that the client does not need to know anything about the
content or structure of the token itself, if there is any. However,
there is still a large amount of metadata that may be attached to a
token, such as its current validity, approved scopes, and information
about the context in which the token was issued. These pieces of
information are often vital to protected resources making
authorization decisions based on the tokens being presented. Since
OAuth 2.0 does not define a protocol for the resource server to learn
meta-information about a token that it has received from an
authorization server, several different approaches have been
developed to bridge this gap. These include using structured token
formats such as JWT [RFC7519] or proprietary inter-service
communication mechanisms (such as shared databases and protected
enterprise service buses) that convey token information.
This specification defines a protocol that allows authorized
protected resources to query the authorization server to determine
the set of metadata for a given token that was presented to them by
an OAuth 2.0 client. This metadata includes whether or not the token
is currently active (or if it has expired or otherwise been revoked),
what rights of access the token carries (usually conveyed through
OAuth 2.0 scopes), and the authorization context in which the token
was granted (including who authorized the token and which client it
was issued to). Token introspection allows a protected resource to
query this information regardless of whether or not it is carried in
the token itself, allowing this method to be used along with or
independently of structured token values. Additionally, a protected
resource can use the mechanism described in this specification to
introspect the token in a particular authorization decision context
and ascertain the relevant metadata about the token to make this
authorization decision appropriately.
1.1. Notational Conventions
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL NOT',
'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'NOT RECOMMENDED', 'MAY', and
'OPTIONAL' in this document are to be interpreted as described in
[RFC2119].
Unless otherwise noted, all the protocol parameter names and values
are case sensitive.
1.2. Terminology
This section defines the terminology used by this specification.
This section is a normative portion of this specification, imposing
requirements upon implementations.
This specification uses the terms "access token", "authorization
endpoint", "authorization grant", "authorization server", "client",
"client identifier", "protected resource", "refresh token", "resource
owner", "resource server", and "token endpoint" defined by OAuth 2.0
[RFC6749], and the terms "claim names" and "claim values" defined by
JSON Web Token (JWT) [RFC7519].
This specification defines the following terms:
Token Introspection
The act of inquiring about the current state of an OAuth 2.0 token
through use of the network protocol defined in this document.
Introspection Endpoint
The OAuth 2.0 endpoint through which the token introspection
operation is accomplished.
2. Introspection Endpoint
The introspection endpoint is an OAuth 2.0 endpoint that takes a
parameter representing an OAuth 2.0 token and returns a JSON
[RFC7159] document representing the meta information surrounding the
token, including whether this token is currently active. The
definition of an active token is dependent upon the authorization
server, but this is commonly a token that has been issued by this
authorization server, is not expired, has not been revoked, and is
valid for use at the protected resource making the introspection
call.
The introspection endpoint MUST be protected by a transport-layer
security mechanism as described in Section 4. The means by which the
protected resource discovers the location of the introspection
endpoint are outside the scope of this specification.
2.1. Introspection Request
The protected resource calls the introspection endpoint using an HTTP
POST [RFC7231] request with parameters sent as
"application/x-www-form-urlencoded" data as defined in
[W3C.REC-html5-20141028]. The protected resource sends a parameter
representing the token along with optional parameters representing
additional context that is known by the protected resource to aid the
authorization server in its response.
token
REQUIRED. The string value of the token. For access tokens, this
is the "access_token" value returned from the token endpoint
defined in OAuth 2.0 [RFC6749], Section 5.1. For refresh tokens,
this is the "refresh_token" value returned from the token endpoint
as defined in OAuth 2.0 [RFC6749], Section 5.1. Other token types
are outside the scope of this specification.
token_type_hint
OPTIONAL. A hint about the type of the token submitted for
introspection. The protected resource MAY pass this parameter to
help the authorization server optimize the token lookup. If the
server is unable to locate the token using the given hint, it MUST
extend its search across all of its supported token types. An
authorization server MAY ignore this parameter, particularly if it
is able to detect the token type automatically. Values for this
field are defined in the "OAuth Token Type Hints" registry defined
in OAuth Token Revocation [RFC7009].
The introspection endpoint MAY accept other OPTIONAL parameters to
provide further context to the query. For instance, an authorization
server may desire to know the IP address of the client accessing the
protected resource to determine if the correct client is likely to be
presenting the token. The definition of this or any other parameters
are outside the scope of this specification, to be defined by service
documentation or extensions to this specification. If the
authorization server is unable to determine the state of the token
without additional information, it SHOULD return an introspection
response indicating the token is not active as described in
Section 2.2.
To prevent token scanning attacks, the endpoint MUST also require
some form of authorization to access this endpoint, such as client
authentication as described in OAuth 2.0 [RFC6749] or a separate
OAuth 2.0 access token such as the bearer token described in OAuth
2.0 Bearer Token Usage [RFC6750]. The methods of managing and
validating these authentication credentials are out of scope of this
specification.
For example, the following shows a protected resource calling the
token introspection endpoint to query about an OAuth 2.0 bearer
token. The protected resource is using a separate OAuth 2.0 bearer
token to authorize this call.
The following is a non-normative example request:
POST /introspect HTTP/1.1
Host: server.example.com
Accept: application/json
Content-Type: application/x-www-form-urlencoded
Authorization: Bearer 23410913-abewfq.123483
token=2YotnFZFEjr1zCsicMWpAA
In this example, the protected resource uses a client identifier and
client secret to authenticate itself to the introspection endpoint.
The protected resource also sends a token type hint indicating that
it is inquiring about an access token.
The following is a non-normative example request:
POST /introspect HTTP/1.1
Host: server.example.com
Accept: application/json
Content-Type: application/x-www-form-urlencoded
Authorization: Basic czZCaGRSa3F0MzpnWDFmQmF0M2JW
token=mF_9.B5f-4.1JqM&token_type_hint=access_token
2.2. Introspection Response
The server responds with a JSON object [RFC7159] in "application/
json" format with the following top-level members.
active
REQUIRED. Boolean indicator of whether or not the presented token
is currently active. The specifics of a token's "active" state
will vary depending on the implementation of the authorization
server and the information it keeps about its tokens, but a "true"
value return for the "active" property will generally indicate
that a given token has been issued by this authorization server,
has not been revoked by the resource owner, and is within its
given time window of validity (e.g., after its issuance time and
before its expiration time). See Section 4 for information on
implementation of such checks.
scope
OPTIONAL. A JSON string containing a space-separated list of
scopes associated with this token, in the format described in
Section 3.3 of OAuth 2.0 [RFC6749].
client_id
OPTIONAL. Client identifier for the OAuth 2.0 client that
requested this token.
username
OPTIONAL. Human-readable identifier for the resource owner who
authorized this token.
token_type
OPTIONAL. Type of the token as defined in Section 5.1 of OAuth
2.0 [RFC6749].
exp
OPTIONAL. Integer timestamp, measured in the number of seconds
since January 1 1970 UTC, indicating when this token will expire,
as defined in JWT [RFC7519].
iat
OPTIONAL. Integer timestamp, measured in the number of seconds
since January 1 1970 UTC, indicating when this token was
originally issued, as defined in JWT [RFC7519].
nbf
OPTIONAL. Integer timestamp, measured in the number of seconds
since January 1 1970 UTC, indicating when this token is not to be
used before, as defined in JWT [RFC7519].
sub
OPTIONAL. Subject of the token, as defined in JWT [RFC7519].
Usually a machine-readable identifier of the resource owner who
authorized this token.
aud
OPTIONAL. Service-specific string identifier or list of string
identifiers representing the intended audience for this token, as
defined in JWT [RFC7519].
iss
OPTIONAL. String representing the issuer of this token, as
defined in JWT [RFC7519].
jti
OPTIONAL. String identifier for the token, as defined in JWT
[RFC7519].
Specific implementations MAY extend this structure with their own
service-specific response names as top-level members of this JSON
object. Response names intended to be used across domains MUST be
registered in the "OAuth Token Introspection Response" registry
defined in Section 3.1.
The authorization server MAY respond differently to different
protected resources making the same request. For instance, an
authorization server MAY limit which scopes from a given token are
returned for each protected resource to prevent a protected resource
from learning more about the larger network than is necessary for its
operation.
The response MAY be cached by the protected resource to improve
performance and reduce load on the introspection endpoint, but at the
cost of liveness of the information used by the protected resource to
make authorization decisions. See Section 4 for more information
regarding the trade off when the response is cached.
For example, the following response contains a set of information
about an active token:
The following is a non-normative example response:
HTTP/1.1 200 OK
Content-Type: application/json
{
"active": true,
"client_id": "l238j323ds-23ij4",
"username": "jdoe",
"scope": "read write dolphin",
"sub": "Z5O3upPC88QrAjx00dis",
"aud": "https://protected.example.net/resource",
"iss": "https://server.example.com/",
"exp": 1419356238,
"iat": 1419350238,
"extension_field": "twenty-seven"
}
If the introspection call is properly authorized but the token is not
active, does not exist on this server, or the protected resource is
not allowed to introspect this particular token, then the
authorization server MUST return an introspection response with the
"active" field set to "false". Note that to avoid disclosing too
much of the authorization server's state to a third party, the
authorization server SHOULD NOT include any additional information
about an inactive token, including why the token is inactive.
The following is a non-normative example response for a token that
has been revoked or is otherwise invalid:
HTTP/1.1 200 OK
Content-Type: application/json
{
"active": false
}
2.3. Error Response
If the protected resource uses OAuth 2.0 client credentials to
authenticate to the introspection endpoint and its credentials are
invalid, the authorization server responds with an HTTP 401
(Unauthorized) as described in Section 5.2 of OAuth 2.0 [RFC6749].
If the protected resource uses an OAuth 2.0 bearer token to authorize
its call to the introspection endpoint and the token used for
authorization does not contain sufficient privileges or is otherwise
invalid for this request, the authorization server responds with an
HTTP 401 code as described in Section 3 of OAuth 2.0 Bearer Token
Usage [RFC6750].
Note that a properly formed and authorized query for an inactive or
otherwise invalid token (or a token the protected resource is not
allowed to know about) is not considered an error response by this
specification. In these cases, the authorization server MUST instead
respond with an introspection response with the "active" field set to
"false" as described in Section 2.2.
3. IANA Considerations
3.1. OAuth Token Introspection Response Registry
This specification establishes the "OAuth Token Introspection
Response" registry.
OAuth token introspection response parameters are registered by Specification Required [RFC5226] after a two-week
EID 4764 (Verified) is as follows:Section: 3.1
Original Text:
OAuth registration client metadata names and descriptions are
registered by
Corrected Text:
OAuth token introspection response parameters are registered by
Notes:
The original text erroneously mentions registration of client metadata names, however, this RFC 7662 is about about token introspection and this section is about registration of token introspection response parameters (client metadata name registration is RFC 7591).
review period on the oauth-ext-review@ietf.org mailing list, on the
advice of one or more Designated Experts. However, to allow for the
allocation of names prior to publication, the Designated Expert(s)
may approve registration once they are satisfied that such a
specification will be published.
Registration requests sent to the mailing list for review should use
an appropriate subject (e.g., "Request to register OAuth Token
Introspection Response name: example").
Within the review period, the Designated Expert(s) will either
approve or deny the registration request, communicating this decision
to the review list and IANA. Denials should include an explanation
and, if applicable, suggestions as to how to make the request
successful.
IANA must only accept registry updates from the Designated Expert(s)
and should direct all requests for registration to the review mailing
list.
3.1.1. Registration Template
Name:
The name requested (e.g., "example"). This name is case
sensitive. Names that match other registered names in a case
insensitive manner SHOULD NOT be accepted. Names that match
claims registered in the "JSON Web Token Claims" registry
established by [RFC7519] SHOULD have comparable definitions and
semantics.
Description:
Brief description of the metadata value (e.g., "Example
description").
Change controller:
For Standards Track RFCs, state "IESG". For other documents, give
the name of the responsible party. Other details (e.g., postal
address, email address, home page URI) may also be included.
Specification document(s):
Reference to the document(s) that specify the token endpoint
authorization method, preferably including a URI that can be used
to retrieve a copy of the document(s). An indication of the
relevant sections may also be included but is not required.
3.1.2. Initial Registry Contents
The initial contents of the "OAuth Token Introspection Response"
registry are as follows:
o Name: "active"
o Description: Token active status
o Change Controller: IESG
o Specification Document(s): Section 2.2 of RFC 7662 (this
document).
o Name: "username"
o Description: User identifier of the resource owner
o Change Controller: IESG
o Specification Document(s): Section 2.2 of RFC 7662 (this
document).
o Name: "client_id"
o Description: Client identifier of the client
o Change Controller: IESG
o Specification Document(s): Section 2.2 of RFC 7662 (this
document).
o Name: "scope"
o Description: Authorized scopes of the token
o Change Controller: IESG
o Specification Document(s): Section 2.2 of RFC 7662 (this
document).
o Name: "token_type"
o Description: Type of the token
o Change Controller: IESG
o Specification Document(s): Section 2.2 of RFC 7662 (this
document).
o Name: "exp"
o Description: Expiration timestamp of the token
o Change Controller: IESG
o Specification Document(s): Section 2.2 of RFC 7662 (this
document).
o Name: "iat"
o Description: Issuance timestamp of the token
o Change Controller: IESG
o Specification Document(s): Section 2.2 of RFC 7662 (this
document).
o Name: "nbf"
o Description: Timestamp before which the token is not valid
o Change Controller: IESG
o Specification Document(s): Section 2.2 of RFC 7662 (this
document).
o Name: "sub"
o Description: Subject of the token
o Change Controller: IESG
o Specification Document(s): Section 2.2 of RFC 7662 (this
document).
o Name: "aud"
o Description: Audience of the token
o Change Controller: IESG
o Specification Document(s): Section 2.2 of RFC 7662 (this
document).
o Name: "iss"
o Description: Issuer of the token
o Change Controller: IESG
o Specification Document(s): Section 2.2 of RFC 7662 (this
document).
o Name: "jti"
o Description: Unique identifier of the token
o Change Controller: IESG
o Specification Document(s): Section 2.2 of RFC 7662 (this
document).
4. Security Considerations
Since there are many different and valid ways to implement an OAuth
2.0 system, there are consequently many ways for an authorization
server to determine whether or not a token is currently "active".
However, since resource servers using token introspection rely on the
authorization server to determine the state of a token, the
authorization server MUST perform all applicable checks against a
token's state. For instance, these tests include the following:
o If the token can expire, the authorization server MUST determine
whether or not the token has expired.
o If the token can be issued before it is able to be used, the
authorization server MUST determine whether or not a token's valid
period has started yet.
o If the token can be revoked after it was issued, the authorization
server MUST determine whether or not such a revocation has taken
place.
o If the token has been signed, the authorization server MUST
validate the signature.
o If the token can be used only at certain resource servers, the
authorization server MUST determine whether or not the token can
be used at the resource server making the introspection call.
If an authorization server fails to perform any applicable check, the
resource server could make an erroneous security decision based on
that response. Note that not all of these checks will be applicable
to all OAuth 2.0 deployments and it is up to the authorization server
to determine which of these checks (and any other checks) apply.
If left unprotected and un-throttled, the introspection endpoint
could present a means for an attacker to poll a series of possible
token values, fishing for a valid token. To prevent this, the
authorization server MUST require authentication of protected
resources that need to access the introspection endpoint and SHOULD
require protected resources to be specifically authorized to call the
introspection endpoint. The specifics of such authentication
credentials are out of scope of this specification, but commonly
these credentials could take the form of any valid client
authentication mechanism used with the token endpoint, an OAuth 2.0
access token, or other HTTP authorization or authentication
mechanism. A single piece of software acting as both a client and a
protected resource MAY reuse the same credentials between the token
endpoint and the introspection endpoint, though doing so potentially
conflates the activities of the client and protected resource
portions of the software and the authorization server MAY require
separate credentials for each mode.
Since the introspection endpoint takes in OAuth 2.0 tokens as
parameters and responds with information used to make authorization
decisions, the server MUST support Transport Layer Security (TLS) 1.2
[RFC5246] and MAY support additional transport-layer mechanisms
meeting its security requirements. When using TLS, the client or
protected resource MUST perform a TLS/SSL server certificate check,
as specified in [RFC6125]. Implementation security considerations
can be found in Recommendations for Secure Use of TLS and DTLS
[BCP195].
To prevent the values of access tokens from leaking into server-side
logs via query parameters, an authorization server offering token
introspection MAY disallow the use of HTTP GET on the introspection
endpoint and instead require the HTTP POST method to be used at the
introspection endpoint.
To avoid disclosing the internal state of the authorization server,
an introspection response for an inactive token SHOULD NOT contain
any additional claims beyond the required "active" claim (with its
value set to "false").
Since a protected resource MAY cache the response of the
introspection endpoint, designers of an OAuth 2.0 system using this
protocol MUST consider the performance and security trade-offs
inherent in caching security information such as this. A less
aggressive cache with a short timeout will provide the protected
resource with more up-to-date information (due to it needing to query
the introspection endpoint more often) at the cost of increased
network traffic and load on the introspection endpoint. A more
aggressive cache with a longer duration will minimize network traffic
and load on the introspection endpoint, but at the risk of stale
information about the token. For example, the token may be revoked
while the protected resource is relying on the value of the cached
response to make authorization decisions. This creates a window
during which a revoked token could be used at the protected resource.
Consequently, an acceptable cache validity duration needs to be
carefully considered given the concerns and sensitivities of the
protected resource being accessed and the likelihood of a token being
revoked or invalidated in the interim period. Highly sensitive
environments can opt to disable caching entirely on the protected
resource to eliminate the risk of stale cached information entirely,
again at the cost of increased network traffic and server load. If
the response contains the "exp" parameter (expiration), the response
MUST NOT be cached beyond the time indicated therein.
An authorization server offering token introspection must be able to
understand the token values being presented to it during this call.
The exact means by which this happens is an implementation detail and
is outside the scope of this specification. For unstructured tokens,
this could take the form of a simple server-side database query
against a data store containing the context information for the
token. For structured tokens, this could take the form of the server
parsing the token, validating its signature or other protection
mechanisms, and returning the information contained in the token back
to the protected resource (allowing the protected resource to be
unaware of the token's contents, much like the client). Note that
for tokens carrying encrypted information that is needed during the
introspection process, the authorization server must be able to
decrypt and validate the token to access this information. Also note
that in cases where the authorization server stores no information
about the token and has no means of accessing information about the
token by parsing the token itself, it cannot likely offer an
introspection service.
5. Privacy Considerations
The introspection response may contain privacy-sensitive information
such as user identifiers for resource owners. When this is the case,
measures MUST be taken to prevent disclosure of this information to
unintended parties. One method is to transmit user identifiers as
opaque service-specific strings, potentially returning different
identifiers to each protected resource.
If the protected resource sends additional information about the
client's request to the authorization server (such as the client's IP
address) using an extension of this specification, such information
could have additional privacy considerations that the extension
should detail. However, the nature and implications of such
extensions are outside the scope of this specification.
Omitting privacy-sensitive information from an introspection response
is the simplest way of minimizing privacy issues.
6. References
6.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<http://www.rfc-editor.org/info/rfc2119>.
[RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an
IANA Considerations Section in RFCs", BCP 26, RFC 5226,
DOI 10.17487/RFC5226, May 2008,
<http://www.rfc-editor.org/info/rfc5226>.
[RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security
(TLS) Protocol Version 1.2", RFC 5246,
DOI 10.17487/RFC5246, August 2008,
<http://www.rfc-editor.org/info/rfc5246>.
[RFC6125] Saint-Andre, P. and J. Hodges, "Representation and
Verification of Domain-Based Application Service Identity
within Internet Public Key Infrastructure Using X.509
(PKIX) Certificates in the Context of Transport Layer
Security (TLS)", RFC 6125, DOI 10.17487/RFC6125, March
2011, <http://www.rfc-editor.org/info/rfc6125>.
[RFC6749] Hardt, D., Ed., "The OAuth 2.0 Authorization Framework",
RFC 6749, DOI 10.17487/RFC6749, October 2012,
<http://www.rfc-editor.org/info/rfc6749>.
[RFC6750] Jones, M. and D. Hardt, "The OAuth 2.0 Authorization
Framework: Bearer Token Usage", RFC 6750,
DOI 10.17487/RFC6750, October 2012,
<http://www.rfc-editor.org/info/rfc6750>.
[RFC7009] Lodderstedt, T., Ed., Dronia, S., and M. Scurtescu, "OAuth
2.0 Token Revocation", RFC 7009, DOI 10.17487/RFC7009,
August 2013, <http://www.rfc-editor.org/info/rfc7009>.
[RFC7159] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data
Interchange Format", RFC 7159, DOI 10.17487/RFC7159, March
2014, <http://www.rfc-editor.org/info/rfc7159>.
[RFC7231] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
Protocol (HTTP/1.1): Semantics and Content", RFC 7231,
DOI 10.17487/RFC7231, June 2014,
<http://www.rfc-editor.org/info/rfc7231>.
[RFC7519] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token
(JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015,
<http://www.rfc-editor.org/info/rfc7519>.
[W3C.REC-html5-20141028]
Hickson, I., Berjon, R., Faulkner, S., Leithead, T.,
Navara, E., 0'Connor, E., and S. Pfeiffer, "HTML5", World
Wide Web Consortium Recommendation
REC-html5-20141028, October 2014,
<http://www.w3.org/TR/2014/REC-html5-20141028>.
6.2. Informative References
[BCP195] Sheffer, Y., Holz, R., and P. Saint-Andre,
"Recommendations for Secure Use of Transport Layer
Security (TLS) and Datagram Transport Layer Security
(DTLS)", BCP 195, RFC 7525, May 2015,
<http://www.rfc-editor.org/info/bcp195>.
Appendix A. Use with Proof-of-Possession Tokens
With bearer tokens such as those defined by OAuth 2.0 Bearer Token
Usage [RFC6750], the protected resource will have in its possession
the entire secret portion of the token for submission to the
introspection service. However, for proof-of-possession style
tokens, the protected resource will have only a token identifier used
during the request, along with the cryptographic signature on the
request. To validate the signature on the request, the protected
resource could be able to submit the token identifier to the
authorization server's introspection endpoint to obtain the necessary
key information needed for that token. The details of this usage are
outside the scope of this specification and will be defined in an
extension to this specification in concert with the definition of
proof-of-possession tokens.
Acknowledgements
Thanks to the OAuth Working Group and the User Managed Access Working
Group for feedback and review of this document, and to the various
implementors of both the client and server components of this
specification. In particular, the author would like to thank Amanda
Anganes, John Bradley, Thomas Broyer, Brian Campbell, George
Fletcher, Paul Freemantle, Thomas Hardjono, Eve Maler, Josh Mandel,
Steve Moore, Mike Schwartz, Prabath Siriwardena, Sarah Squire, and
Hannes Tschofennig.
Author's Address
Justin Richer (editor)
Email: ietf@justin.richer.org