patch-2.4.9 linux/include/asm-arm/arch-sa1100/bitsy.h

• Lines: 112
• Date: Sun Aug 12 11:14:00 2001
• Orig file: v2.4.8/linux/include/asm-arm/arch-sa1100/bitsy.h
• Orig date: Thu Apr 12 12:20:31 2001

diff -u --recursive --new-file v2.4.8/linux/include/asm-arm/arch-sa1100/bitsy.h linux/include/asm-arm/arch-sa1100/bitsy.h
@@ -1,50 +1,79 @@
+/*
+*
+* Definitions for H3600 Handheld Computer
+*
+* Copyright 2000 Compaq Computer Corporation.
+*
+* Use consistent with the GNU GPL is permitted,
+* provided that this copyright notice is
+* preserved in its entirety in all copies and derived works.
+*
+* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+* FITNESS FOR ANY PARTICULAR PURPOSE.
+*
+* Author: Jamey Hicks.
+*
+*/
+
 #ifndef _INCLUDE_BITSY_H_
 #define _INCLUDE_BITSY_H_
 
-#define GPIO_BITSY_NPOWER_BUTTON    GPIO_GPIO (0)
-#define GPIO_BITSY_ACTION_BUTTON    GPIO_GPIO (18)
+#define GPIO_BITSY_NPOWER_BUTTON	GPIO_GPIO (0)
+#define GPIO_BITSY_ACTION_BUTTON	GPIO_GPIO (18)
 
-#define GPIO_BITSY_PCMCIA_CD0  GPIO_GPIO (17)
-#define GPIO_BITSY_PCMCIA_CD1  GPIO_GPIO (10)
-#define GPIO_BITSY_PCMCIA_IRQ0 GPIO_GPIO (21)
-#define GPIO_BITSY_PCMCIA_IRQ1 GPIO_GPIO (11)
+#define GPIO_BITSY_PCMCIA_CD0		GPIO_GPIO (17)
+#define GPIO_BITSY_PCMCIA_CD1		GPIO_GPIO (10)
+#define GPIO_BITSY_PCMCIA_IRQ0		GPIO_GPIO (21)
+#define GPIO_BITSY_PCMCIA_IRQ1		GPIO_GPIO (11)
 
 /* audio sample rate clock generator */
-#define GPIO_BITSY_CLK_SET0    GPIO_GPIO (12)
-#define GPIO_BITSY_CLK_SET1    GPIO_GPIO (13)
-/* UDA1341 L3 Interface */
-#define GPIO_BITSY_L3_DATA     GPIO_GPIO (14)
-#define GPIO_BITSY_L3_CLOCK    GPIO_GPIO (16)
-#define GPIO_BITSY_L3_MODE     GPIO_GPIO (15)
-
+#define GPIO_BITSY_CLK_SET0		GPIO_GPIO (12)
+#define GPIO_BITSY_CLK_SET1		GPIO_GPIO (13)
 
+/* UDA1341 L3 Interface */
+#define GPIO_BITSY_L3_DATA		GPIO_GPIO (14)
+#define GPIO_BITSY_L3_CLOCK		GPIO_GPIO (16)
+#define GPIO_BITSY_L3_MODE		GPIO_GPIO (15)
+
+#define GPIO_BITSY_OPT_LOCK		GPIO_GPIO (22)
+#define GPIO_BITSY_OPT_IRQ		GPIO_GPIO (24)
+#define GPIO_BITSY_OPT_DET		GPIO_GPIO (27)
+
+#define GPIO_BITSY_COM_DCD		GPIO_GPIO (23)
+#define GPIO_BITSY_COM_CTS		GPIO_GPIO (25)
+#define GPIO_BITSY_COM_RTS		GPIO_GPIO (26)
 
 #define IRQ_GPIO_BITSY_NPOWER_BUTTON    IRQ_GPIO0
 #define IRQ_GPIO_BITSY_ACTION_BUTTON    IRQ_GPIO18
 #define IRQ_GPIO_BITSY_PCMCIA_CD0	IRQ_GPIO17
 #define IRQ_GPIO_BITSY_PCMCIA_CD1	IRQ_GPIO10
 #define IRQ_GPIO_BITSY_PCMCIA_IRQ0	IRQ_GPIO21
-#define IRQ_GPIO_BITSY_PCMCIA_IRQ1	IRQ_GPIO22
-
-#define EGPIO_BITSY_VPP_ON      (1 << 0)
-#define EGPIO_BITSY_CARD_RESET  (1 << 1)    /* reset the attached pcmcia/compactflash card.  active high. */
-#define EGPIO_BITSY_OPT_RESET   (1 << 2)    /* reset the attached option pack.  active high. */
-#define EGPIO_BITSY_CODEC_NRESET (1 << 3)   /* reset the onboard UDA1341.  active low. */
-#define EGPIO_BITSY_OPT_NVRAM_ON (1 << 4)   /* apply power to optionpack nvram, active high. */
-#define EGPIO_BITSY_OPT_ON       (1 << 5)   /* full power to option pack.  active high. */
-#define EGPIO_BITSY_LCD_ON       (1 << 6)   /* enable 3.3V to LCD.  active high. */
-#define EGPIO_BITSY_RS232_ON     (1 << 7)   /* UART3 transceiver force on.  Active high. */
-#define EGPIO_BITSY_LCD_PCI      (1 << 8)   /* LCD control IC enable.  active high. */
-#define EGPIO_BITSY_IR_ON        (1 << 9)   /* apply power to IR module.  active high. */
-#define EGPIO_BITSY_AUD_AMP_ON   (1 << 10)  /* apply power to audio power amp.  active high. */
-#define EGPIO_BITSY_AUD_PWR_ON   (1 << 11)  /* apply poewr to reset of audio circuit.  active high. */
-#define EGPIO_BITSY_QMUTE        (1 << 12)  /* mute control for onboard UDA1341.  active high. */
-#define EGPIO_BITSY_IR_FSEL      (1 << 13)  /* IR speed select: 1->fast, 0->slow */
-#define EGPIO_BITSY_LCD_5V_ON    (1 << 14)  /* enable 5V to LCD. active high. */
-#define EGPIO_BITSY_LVDD_ON      (1 << 15)  /* enable 9V and -6.5V to LCD. */
+#define IRQ_GPIO_BITSY_PCMCIA_IRQ1	IRQ_GPIO11
+#define IRQ_GPIO_BITSY_OPT_IRQ		IRQ_GPIO24
+#define IRQ_GPIO_BITSY_OPT_DET		IRQ_GPIO27
+#define IRQ_GPIO_BITSY_COM_DCD          IRQ_GPIO23
+#define IRQ_GPIO_BITSY_COM_CTS          IRQ_GPIO25
+
+#define EGPIO_BITSY_VPP_ON		(1 << 0)
+#define EGPIO_BITSY_CARD_RESET		(1 << 1)  /* reset the attached pcmcia/compactflash card.  active high. */
+#define EGPIO_BITSY_OPT_RESET		(1 << 2)  /* reset the attached option pack.  active high. */
+#define EGPIO_BITSY_CODEC_NRESET	(1 << 3)  /* reset the onboard UDA1341.  active low. */
+#define EGPIO_BITSY_OPT_NVRAM_ON	(1 << 4)  /* apply power to optionpack nvram, active high. */
+#define EGPIO_BITSY_OPT_ON		(1 << 5)  /* full power to option pack.  active high. */
+#define EGPIO_BITSY_LCD_ON       	(1 << 6)  /* enable 3.3V to LCD.  active high. */
+#define EGPIO_BITSY_RS232_ON		(1 << 7)  /* UART3 transceiver force on.  Active high. */
+#define EGPIO_BITSY_LCD_PCI		(1 << 8)  /* LCD control IC enable.  active high. */
+#define EGPIO_BITSY_IR_ON		(1 << 9)  /* apply power to IR module.  active high. */
+#define EGPIO_BITSY_AUD_AMP_ON		(1 << 10) /* apply power to audio power amp.  active high. */
+#define EGPIO_BITSY_AUD_PWR_ON		(1 << 11) /* apply poewr to reset of audio circuit.  active high. */
+#define EGPIO_BITSY_QMUTE		(1 << 12) /* mute control for onboard UDA1341.  active high. */
+#define EGPIO_BITSY_IR_FSEL		(1 << 13) /* IR speed select: 1->fast, 0->slow */
+#define EGPIO_BITSY_LCD_5V_ON		(1 << 14) /* enable 5V to LCD. active high. */
+#define EGPIO_BITSY_LVDD_ON		(1 << 15) /* enable 9V and -6.5V to LCD. */
 
 #ifndef __ASSEMBLY__
-#define BITSY_EGPIO  (*(volatile int *)0xf0000000)
+#define BITSY_EGPIO	(*(volatile int *)0xf0000000)
 extern void clr_bitsy_egpio(unsigned long x);
 extern void set_bitsy_egpio(unsigned long x);
 #endif