patch-2.4.5 linux/drivers/media/video/bt819.c
Next file: linux/drivers/media/video/bt856.c
Previous file: linux/drivers/media/video/adv7175.c
Back to the patch index
Back to the overall index
- Lines: 497
- Date:
Sat May 19 17:43:06 2001
- Orig file:
v2.4.4/linux/drivers/media/video/bt819.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.4.4/linux/drivers/media/video/bt819.c linux/drivers/media/video/bt819.c
@@ -0,0 +1,496 @@
+/*
+ bt819 - BT819A VideoStream Decoder (Rockwell Part)
+
+ Copyright (C) 1999 Mike Bernson <mike@mlb.org>
+ Copyright (C) 1998 Dave Perks <dperks@ibm.net>
+
+ Modifications for LML33/DC10plus unified driver
+ Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
+
+ This code was modify/ported from the saa7111 driver written
+ by Dave Perks.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/malloc.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+
+#include <linux/videodev.h>
+
+#include <linux/i2c-old.h>
+#include <linux/video_decoder.h>
+
+#define DEBUG(x) x /* Debug driver */
+
+/* ----------------------------------------------------------------------- */
+
+struct bt819 {
+ struct i2c_bus *bus;
+ int addr;
+ unsigned char reg[32];
+
+ int initialized;
+ int norm;
+ int input;
+ int enable;
+ int bright;
+ int contrast;
+ int hue;
+ int sat;
+};
+
+struct timing {
+ int hactive;
+ int hdelay;
+ int vactive;
+ int vdelay;
+ int hscale;
+ int vscale;
+};
+
+struct timing timing_data[] = {
+ {864 - 24, 2, 623, 1, 0x0504, 0x0000},
+ {858 - 24, 2, 523, 1, 0x00f8, 0x0000},
+// { 858-68, 64, 523, 1, 0x00f8, 0x0000 },
+};
+
+#define I2C_BT819 0x8a
+
+#define I2C_DELAY 10
+
+/* ----------------------------------------------------------------------- */
+
+static int bt819_write(struct bt819 *dev, unsigned char subaddr,
+ unsigned char data)
+{
+ int ack;
+
+ LOCK_I2C_BUS(dev->bus);
+ i2c_start(dev->bus);
+ i2c_sendbyte(dev->bus, dev->addr, I2C_DELAY);
+ i2c_sendbyte(dev->bus, subaddr, I2C_DELAY);
+ ack = i2c_sendbyte(dev->bus, data, I2C_DELAY);
+ dev->reg[subaddr] = data;
+ i2c_stop(dev->bus);
+ UNLOCK_I2C_BUS(dev->bus);
+ return ack;
+}
+
+static int bt819_setbit(struct bt819 *dev, int subaddr, int bit, int data)
+{
+ return bt819_write(dev, subaddr, (dev->reg[subaddr] & ~(1 << bit)) | (data ? (1 << bit) : 0));
+}
+
+static int bt819_write_block(struct bt819 *dev, unsigned const char *data,
+ unsigned int len)
+{
+ int ack;
+ unsigned subaddr;
+
+ ack = 0;
+ while (len > 1) {
+ LOCK_I2C_BUS(dev->bus);
+ i2c_start(dev->bus);
+ i2c_sendbyte(dev->bus, dev->addr, I2C_DELAY);
+ ack = i2c_sendbyte(dev->bus, (subaddr = *data++), I2C_DELAY);
+ ack = i2c_sendbyte(dev->bus, (dev->reg[subaddr] = *data++),
+ I2C_DELAY);
+ len -= 2;
+ while (len > 1 && *data == ++subaddr) {
+ data++;
+ ack =
+ i2c_sendbyte(dev->bus, (dev->reg[subaddr] = *data++), I2C_DELAY);
+ len -= 2;
+ }
+ i2c_stop(dev->bus);
+ UNLOCK_I2C_BUS(dev->bus);
+ }
+ return ack;
+}
+
+static int bt819_read(struct bt819 *dev, unsigned char subaddr)
+{
+ int data;
+
+ LOCK_I2C_BUS(dev->bus);
+ i2c_start(dev->bus);
+ i2c_sendbyte(dev->bus, dev->addr, I2C_DELAY);
+ i2c_sendbyte(dev->bus, subaddr, I2C_DELAY);
+ i2c_start(dev->bus);
+ i2c_sendbyte(dev->bus, dev->addr | 1, I2C_DELAY);
+ data = i2c_readbyte(dev->bus, 1);
+ i2c_stop(dev->bus);
+ UNLOCK_I2C_BUS(dev->bus);
+ return data;
+}
+
+static int bt819_init(struct i2c_device *device)
+{
+ struct bt819 *decoder;
+
+ static unsigned char init[] = {
+ //0x1f, 0x00, /* Reset */
+ 0x01, 0x59, /* 0x01 input format */
+ 0x02, 0x00, /* 0x02 temporal decimation */
+ 0x03, 0x12, /* 0x03 Cropping msb */
+ 0x04, 0x16, /* 0x04 Vertical Delay, lsb */
+ 0x05, 0xe0, /* 0x05 Vertical Active lsb */
+ 0x06, 0x80, /* 0x06 Horizontal Delay lsb */
+ 0x07, 0xd0, /* 0x07 Horizontal Active lsb */
+ 0x08, 0x00, /* 0x08 Horizontal Scaling msb */
+ 0x09, 0xf8, /* 0x09 Horizontal Scaling lsb */
+ 0x0a, 0x00, /* 0x0a Brightness control */
+ 0x0b, 0x30, /* 0x0b Miscellaneous control */
+ 0x0c, 0xd8, /* 0x0c Luma Gain lsb */
+ 0x0d, 0xfe, /* 0x0d Chroma Gain (U) lsb */
+ 0x0e, 0xb4, /* 0x0e Chroma Gain (V) msb */
+ 0x0f, 0x00, /* 0x0f Hue control */
+ 0x12, 0x04, /* 0x12 Output Format */
+ 0x13, 0x20, /* 0x13 Vertial Scaling msb 0x60, */
+ 0x14, 0x00, /* 0x14 Vertial Scaling lsb */
+ 0x16, 0x04, /* 0x16 Video Timing Polarity 0x02, */
+ 0x18, 0x68, /* 0x18 AGC Delay */
+ 0x19, 0x5d, /* 0x19 Burst Gate Delay */
+ 0x1a, 0x80, /* 0x1a ADC Interface */
+ };
+
+ struct timing *timing;
+
+ decoder = device->data;
+ timing = &timing_data[decoder->norm];
+
+ init[3 * 2 - 1] = (((timing->vdelay >> 8) & 0x03) << 6) |
+ (((timing->vactive >> 8) & 0x03) << 4) |
+ (((timing->hdelay >> 8) & 0x03) << 2) |
+ ((timing->hactive >> 8) & 0x03);
+ init[4 * 2 - 1] = timing->vdelay & 0xff;
+ init[5 * 2 - 1] = timing->vactive & 0xff;
+ init[6 * 2 - 1] = timing->hdelay & 0xff;
+ init[7 * 2 - 1] = timing->hactive & 0xff;
+ init[8 * 2 - 1] = timing->hscale >> 8;
+ init[9 * 2 - 1] = timing->hscale & 0xff;
+
+ bt819_write(decoder, 0x1f, 0x00);
+ mdelay(1);
+ return bt819_write_block(decoder, init, sizeof(init));
+
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int bt819_attach(struct i2c_device *device)
+{
+ int i;
+ struct bt819 *decoder;
+
+ MOD_INC_USE_COUNT;
+
+ device->data = decoder = kmalloc(sizeof(struct bt819), GFP_KERNEL);
+ if (decoder == NULL) {
+ MOD_DEC_USE_COUNT;
+ return -ENOMEM;
+ }
+
+ memset(decoder, 0, sizeof(struct bt819));
+ strcpy(device->name, "bt819");
+ decoder->bus = device->bus;
+ decoder->addr = device->addr;
+ decoder->norm = VIDEO_MODE_NTSC;
+ decoder->input = 0;
+ decoder->enable = 1;
+ decoder->bright = 32768;
+ decoder->contrast = 32768;
+ decoder->hue = 32768;
+ decoder->sat = 32768;
+ decoder->initialized = 0;
+
+ i = bt819_init(device);
+ if (i < 0) {
+ printk(KERN_ERR "%s: bt819_attach: init status %d\n",
+ decoder->bus->name, i);
+ } else {
+ printk(KERN_INFO "%s: bt819_attach: chip version %x\n",
+ decoder->bus->name, bt819_read(decoder,
+ 0x17) & 0x0f);
+ }
+ return 0;
+}
+
+static int bt819_detach(struct i2c_device *device)
+{
+ kfree(device->data);
+ MOD_DEC_USE_COUNT;
+ return 0;
+}
+
+static int bt819_command(struct i2c_device *device, unsigned int cmd, void *arg)
+{
+ int temp;
+
+ struct bt819 *decoder = device->data;
+ //return 0;
+
+ if (!decoder->initialized) { // First call to bt819_init could be
+ bt819_init(device); // without #FRST = 0
+ decoder->initialized = 1;
+ }
+
+ switch (cmd) {
+
+ case DECODER_GET_CAPABILITIES:
+ {
+ struct video_decoder_capability *cap = arg;
+
+ cap->flags
+ = VIDEO_DECODER_PAL
+ | VIDEO_DECODER_NTSC | VIDEO_DECODER_CCIR;
+ cap->inputs = 8;
+ cap->outputs = 1;
+ }
+ break;
+
+ case DECODER_GET_STATUS:
+ {
+ int *iarg = arg;
+ int status;
+ int res;
+
+ status = bt819_read(decoder, 0x00);
+ res = 0;
+ if ((status & 0x80)) {
+ res |= DECODER_STATUS_GOOD;
+ }
+ switch (decoder->norm) {
+ case VIDEO_MODE_NTSC:
+ res |= DECODER_STATUS_NTSC;
+ break;
+ case VIDEO_MODE_PAL:
+ res |= DECODER_STATUS_PAL;
+ break;
+ default:
+ case VIDEO_MODE_AUTO:
+ if ((status & 0x10)) {
+ res |= DECODER_STATUS_PAL;
+ } else {
+ res |= DECODER_STATUS_NTSC;
+ }
+ break;
+ }
+ res |= DECODER_STATUS_COLOR;
+ *iarg = res;
+
+ DEBUG(printk(KERN_INFO "%s-bt819: get status %x\n",
+ decoder->bus->name, *iarg));
+ }
+ break;
+
+ case DECODER_SET_NORM:
+ {
+ int *iarg = arg;
+ struct timing *timing;
+
+ DEBUG(printk(KERN_INFO "%s-bt819: set norm %x\n",
+ decoder->bus->name, *iarg));
+
+ if (*iarg == VIDEO_MODE_NTSC) {
+ bt819_setbit(decoder, 0x01, 0, 1);
+ bt819_setbit(decoder, 0x01, 1, 0);
+ bt819_write(decoder, 0x18, 0x68);
+ bt819_write(decoder, 0x19, 0x5d);
+ //bt819_setbit(decoder, 0x1a, 5, 1);
+ timing = &timing_data[VIDEO_MODE_NTSC];
+ } else {
+ bt819_setbit(decoder, 0x01, 0, 1);
+ bt819_setbit(decoder, 0x01, 1, 1);
+ bt819_write(decoder, 0x18, 0x7f);
+ bt819_write(decoder, 0x19, 0x72);
+ //bt819_setbit(decoder, 0x1a, 5, 0);
+ timing = &timing_data[VIDEO_MODE_PAL];
+ }
+
+ bt819_write(decoder, 0x03,
+ (((timing->vdelay >> 8) & 0x03) << 6) |
+ (((timing->
+ vactive >> 8) & 0x03) << 4) |
+ (((timing->
+ hdelay >> 8) & 0x03) << 2) |
+ ((timing->hactive >> 8) & 0x03));
+ bt819_write(decoder, 0x04, timing->vdelay & 0xff);
+ bt819_write(decoder, 0x05, timing->vactive & 0xff);
+ bt819_write(decoder, 0x06, timing->hdelay & 0xff);
+ bt819_write(decoder, 0x07, timing->hactive & 0xff);
+ bt819_write(decoder, 0x08, timing->hscale >> 8);
+ bt819_write(decoder, 0x09, timing->hscale & 0xff);
+ decoder->norm = *iarg;
+ }
+ break;
+
+ case DECODER_SET_INPUT:
+ {
+ int *iarg = arg;
+
+ DEBUG(printk(KERN_INFO "%s-bt819: set input %x\n",
+ decoder->bus->name, *iarg));
+
+ if (*iarg < 0 || *iarg > 7) {
+ return -EINVAL;
+ }
+
+ if (decoder->input != *iarg) {
+ decoder->input = *iarg;
+ /* select mode */
+ if (decoder->input == 0) {
+ bt819_setbit(decoder, 0x0b, 6, 0);
+ bt819_setbit(decoder, 0x1a, 1, 1);
+ } else {
+ bt819_setbit(decoder, 0x0b, 6, 1);
+ bt819_setbit(decoder, 0x1a, 1, 0);
+ }
+ }
+ }
+ break;
+
+ case DECODER_SET_OUTPUT:
+ {
+ int *iarg = arg;
+
+ DEBUG(printk(KERN_INFO "%s-bt819: set output %x\n",
+ decoder->bus->name, *iarg));
+
+ /* not much choice of outputs */
+ if (*iarg != 0) {
+ return -EINVAL;
+ }
+ }
+ break;
+
+ case DECODER_ENABLE_OUTPUT:
+ {
+ int *iarg = arg;
+ int enable = (*iarg != 0);
+
+ DEBUG(printk
+ (KERN_INFO "%s-bt819: enable output %x\n",
+ decoder->bus->name, *iarg));
+
+ if (decoder->enable != enable) {
+ decoder->enable = enable;
+
+ if (decoder->enable) {
+ bt819_setbit(decoder, 0x16, 7, 0);
+ } else {
+ bt819_setbit(decoder, 0x16, 7, 1);
+ }
+ }
+ }
+ break;
+
+ case DECODER_SET_PICTURE:
+ {
+ struct video_picture *pic = arg;
+
+ DEBUG(printk
+ (KERN_INFO
+ "%s-bt819: set picture brightness %d contrast %d colour %d\n",
+ decoder->bus->name, pic->brightness,
+ pic->contrast, pic->colour));
+
+
+ if (decoder->bright != pic->brightness) {
+ /* We want -128 to 127 we get 0-65535 */
+ decoder->bright = pic->brightness;
+ bt819_write(decoder, 0x0a,
+ (decoder->bright >> 8) - 128);
+ }
+
+ if (decoder->contrast != pic->contrast) {
+ /* We want 0 to 511 we get 0-65535 */
+ decoder->contrast = pic->contrast;
+ bt819_write(decoder, 0x0c,
+ (decoder->
+ contrast >> 7) & 0xff);
+ bt819_setbit(decoder, 0x0b, 2,
+ ((decoder->
+ contrast >> 15) & 0x01));
+ }
+
+ if (decoder->sat != pic->colour) {
+ /* We want 0 to 511 we get 0-65535 */
+ decoder->sat = pic->colour;
+ bt819_write(decoder, 0x0d,
+ (decoder->sat >> 7) & 0xff);
+ bt819_setbit(decoder, 0x0b, 1,
+ ((decoder->
+ sat >> 15) & 0x01));
+
+ temp = (decoder->sat * 201) / 237;
+ bt819_write(decoder, 0x0e,
+ (temp >> 7) & 0xff);
+ bt819_setbit(decoder, 0x0b, 0,
+ (temp >> 15) & 0x01);
+ }
+
+ if (decoder->hue != pic->hue) {
+ /* We want -128 to 127 we get 0-65535 */
+ decoder->hue = pic->hue;
+ bt819_write(decoder, 0x0f,
+ 128 - (decoder->hue >> 8));
+ }
+ }
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static struct i2c_driver i2c_driver_bt819 = {
+ "bt819", /* name */
+ I2C_DRIVERID_VIDEODECODER, /* ID */
+ I2C_BT819, I2C_BT819 + 1,
+
+ bt819_attach,
+ bt819_detach,
+ bt819_command
+};
+
+EXPORT_NO_SYMBOLS;
+
+static int bt819_setup(void)
+{
+ return i2c_register_driver(&i2c_driver_bt819);
+}
+
+static void bt819_exit(void)
+{
+ i2c_unregister_driver(&i2c_driver_bt819);
+}
+
+module_init(bt819_setup);
+module_exit(bt819_exit);
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)