patch-2.4.5 linux/arch/ppc/mbxboot/head_8260.S

• Lines: 259
• Date: Wed Dec 31 16:00:00 1969
• Orig file: v2.4.4/linux/arch/ppc/mbxboot/head_8260.S
• Orig date: Mon Jun 19 17:59:36 2000

diff -u --recursive --new-file v2.4.4/linux/arch/ppc/mbxboot/head_8260.S linux/arch/ppc/mbxboot/head_8260.S
@@ -1,258 +0,0 @@
-#include "../kernel/ppc_defs.h"
-#include "../kernel/ppc_asm.tmpl"
-#include <asm/processor.h>
-#include <asm/cache.h>
-
-	.text
-
-/*
- * $Id: head.S,v 1.33 1999/09/08 01:06:58 cort Exp $
- *	
- * Boot loader philosophy:
- *
- *      ROM loads us to some arbitrary location
- *      ROM loads these registers:
- *	
- *          R3 = Pointer to the board configuration data
- *          R5 = Pointer to Open Firmware data 	
- *		 	
- *      ROM jumps to start/start_
- *      Move the boot code to the link address (4 MB)
- *      Call decompress_kernel()
- *         Relocate the initrd, zimage and residual data to 4 MB
- *         Decompress the kernel to 0
- *      Jump to the kernel entry
- *            -- Cort
- */
-	.globl	start
-start:
-	bl	start_
-start_:
-	mr	r11,r3		/* Save pointer to residual/board data */
-	mr      r25,r5          /* Save OFW pointer */
-	li	r3,MSR_IP	/* Establish default MSR value */
-	mtmsr	r3
-
-/* check if we need to relocate ourselves to the link addr or were we
-   loaded there to begin with -- Cort */
-	lis	r4,start@h
-	ori	r4,r4,start@l
-	mflr	r3
-	subi	r3,r3,4		/* we get the nip, not the ip of the branch */
-	mr	r8,r3
-	cmp	0,r3,r4
-	bne	1010f
-/* compute size of whole image in words.  this should be moved to
- * start_ldr() -- Cort
- */
-	lis	r4,start@h
-	ori	r4,r4,start@l
-	lis	r5,end@h
-	ori	r5,r5,end@l
-	addi	r5,r5,3		/* round up */
-	sub	r5,r5,r4
-	srwi	r5,r5,2
-	mr	r7,r5
-	b	start_ldr
-1010:
-/* 
- * no matter where we're loaded, move ourselves to -Ttext address
- */
-relocate:
-	mflr	r3		/* Compute code bias */
-	subi	r3,r3,4
-	mr	r8,r3
-	lis	r4,start@h
-	ori	r4,r4,start@l
-	lis	r5,end@h
-	ori	r5,r5,end@l
-	addi	r5,r5,3			/* Round up - just in case */
-	sub	r5,r5,r4		/* Compute # longwords to move */
-	srwi	r5,r5,2
-	mtctr	r5
-	mr	r7,r5
-	li	r6,0
-	subi	r3,r3,4			/* Set up for loop */
-	subi	r4,r4,4
-00:	lwzu	r5,4(r3)
-	stwu	r5,4(r4)
-	xor	r6,r6,r5
-	bdnz	00b
-  	lis	r3,start_ldr@h
-	ori	r3,r3,start_ldr@l
-	mtlr	r3			/* Easiest way to do an absolute jump */
-	blr
-start_ldr:
-/* Clear all of BSS */
-	lis	r3,edata@h
-	ori	r3,r3,edata@l
-	lis	r4,end@h
-	ori	r4,r4,end@l
-	subi	r3,r3,4
-	subi	r4,r4,4
-	li	r0,0
-50:	stwu	r0,4(r3)
-	cmp	0,r3,r4
-	bne	50b
-90:	mr	r9,r1			/* Save old stack pointer (in case it matters) */
-	lis	r1,.stack@h
-	ori	r1,r1,.stack@l
-	addi	r1,r1,4096*2
-	subi	r1,r1,256
-	li	r2,0x000F		/* Mask pointer to 16-byte boundary */
-	andc	r1,r1,r2
-
-	/* Speed us up a little.
-	*/
-	bl	flush_instruction_cache
-
-/* Run loader */
-	mr	r3,r8			/* Load point */
-	mr	r4,r7			/* Program length */
-	mr	r5,r6			/* Checksum */
-	mr	r6,r11			/* Residual data */
-	mr      r7,r25                  /* OFW interfaces */
-	bl	decompress_kernel
-	
-	/* changed to use r3 (as firmware does) for kernel
-	   as ptr to residual -- Cort*/
-	lis	r6,cmd_line@h
-	ori	r6,r6,cmd_line@l
-	lwz	r6, 0(r6)
-	subi	r7,r6,1
-00:	lbzu	r2,1(r7)
-	cmpi	0,r2,0
-	bne	00b
-
-	/* r4,r5 have initrd_start, size */
-	lis	r2,initrd_start@h
-	ori	r2,r2,initrd_start@l
-	lwz	r4,0(r2)
-	lis	r2,initrd_end@h
-	ori	r2,r2,initrd_end@l
-	lwz	r5,0(r2)
-	
-	/* tell kernel we're prep */
-	/* 
-	 * get start address of kernel code which is stored as a coff
-	 * entry.  see boot/head.S -- Cort 
-	 */
-	li	r9,0x4
-	mtlr	r9
-	lis	r10,0xdeadc0de@h
-	ori	r10,r10,0xdeadc0de@l
-	li	r9,0
-	stw	r10,0(r9)
-/*
- * The Radstone firmware maps PCI memory at 0xc0000000 using BAT2
- * so disable BATs before setting this to avoid a clash
- */
-	li      r8,0
-	mtspr   DBAT0U,r8
-	mtspr   DBAT1U,r8
-	mtspr   DBAT2U,r8
-	mtspr   DBAT3U,r8
-	mtspr   IBAT0U,r8
-	mtspr   IBAT1U,r8
-	mtspr   IBAT2U,r8
-	mtspr   IBAT3U,r8
-
-	blr
-hang:
-	b	hang	
-
-/*
- * Delay for a number of microseconds
- * -- Use the BUS timer (assumes 66MHz)
- */
-	.globl	udelay
-udelay:		
-	mfspr	r4,PVR
-	srwi	r4,r4,16
-	cmpi	0,r4,1		/* 601 ? */
-	bne	.udelay_not_601
-00:	li	r0,86	/* Instructions / microsecond? */
-	mtctr	r0
-10:	addi	r0,r0,0 /* NOP */
-	bdnz	10b
-	subic.	r3,r3,1
-	bne	00b
-	blr
-
-.udelay_not_601:		
-	mulli	r4,r3,1000	/* nanoseconds */
-	addi	r4,r4,59
-	li	r5,60
-	divw	r4,r4,r5	/* BUS ticks */
-1:	mftbu	r5
-	mftb	r6
-	mftbu	r7
-	cmp	0,r5,r7
-	bne	1b		/* Get [synced] base time */
-	addc	r9,r6,r4	/* Compute end time */
-	addze	r8,r5
-2:	mftbu	r5
-	cmp	0,r5,r8
-	blt	2b
-	bgt	3f
-	mftb	r6
-	cmp	0,r6,r9
-	blt	2b
-3:	blr		
-
-.globl _get_HID0
-_get_HID0:		
-	mfspr	r3,HID0
-	blr
-
-.globl _put_HID0
-_put_HID0:		
-	mtspr	HID0,r3
-	blr
-		
-.globl _get_MSR
-_get_MSR:		
-	mfmsr	r3
-	blr
-	
-.globl _put_MSR
-_put_MSR:		
-	mtmsr	r3
-	blr
-
-/*
- * Flush instruction cache
- * *** I'm really paranoid here!
- */
-_GLOBAL(flush_instruction_cache)
-	mflr	r5
-	bl	flush_data_cache
-	mfspr	r3,HID0	/* Caches are controlled by this register */
-	li	r4,0
-	ori	r4,r4,(HID0_ICE|HID0_ICFI)
-	or	r3,r3,r4	/* Need to enable+invalidate to clear */
-	mtspr	HID0,r3
-	andc	r3,r3,r4
-	ori	r3,r3,HID0_ICE	/* Enable cache */
-	mtspr	HID0,r3
-	mtlr	r5
-	blr
-	
-#define NUM_CACHE_LINES 128*8
-#define CACHE_LINE_SIZE 32 
-#define cache_flush_buffer 0x1000
-
-/*
- * Flush data cache
- * *** I'm really paranoid here!
- */
-_GLOBAL(flush_data_cache)
-	lis	r3,cache_flush_buffer@h
-	ori	r3,r3,cache_flush_buffer@l
-	li	r4,NUM_CACHE_LINES
-	mtctr	r4
-00:	lwz	r4,0(r3)
-	addi	r3,r3,CACHE_LINE_SIZE	/* Next line, please */
-	bdnz	00b	
-10:	blr
-	.comm	.stack,4096*2,4