patch-2.4.20 linux-2.4.20/include/asm-ppc64/hvcall.h

• Lines: 86
• Date: Thu Nov 28 15:53:15 2002
• Orig file: linux-2.4.19/include/asm-ppc64/hvcall.h
• Orig date: Wed Dec 31 16:00:00 1969

diff -urN linux-2.4.19/include/asm-ppc64/hvcall.h linux-2.4.20/include/asm-ppc64/hvcall.h
@@ -0,0 +1,85 @@
+
+#define H_Success	0
+#define H_Busy		1	/* Hardware busy -- retry later */
+#define H_Hardware	-1	/* Hardware error */
+#define H_Function	-2	/* Function not supported */
+#define H_Privilege	-3	/* Caller not privileged */
+#define H_Parameter	-4	/* Parameter invalid, out-of-range or conflicting */
+#define H_Bad_Mode	-5	/* Illegal msr value */
+#define H_PTEG_Full	-6	/* PTEG is full */
+#define H_Not_Found	-7	/* PTE was not found" */
+#define H_Reserved_DABR	-8	/* DABR address is reserved by the hypervisor on this processor" */
+
+/* Flags */
+#define H_LARGE_PAGE		(1UL<<(63-16))
+#define H_EXACT		    (1UL<<(63-24))	/* Use exact PTE or return H_PTEG_FULL */
+#define H_R_XLATE		(1UL<<(63-25))	/* include a valid logical page num in the pte if the valid bit is set */
+#define H_READ_4		(1UL<<(63-26))	/* Return 4 PTEs */
+#define H_AVPN			(1UL<<(63-32))	/* An avpn is provided as a sanity test */
+#define H_ANDCOND		(1UL<<(63-33))
+#define H_ICACHE_INVALIDATE	(1UL<<(63-40))	/* icbi, etc.  (ignored for IO pages) */
+#define H_ICACHE_SYNCHRONIZE	(1UL<<(63-41))	/* dcbst, icbi, etc (ignored for IO pages */
+#define H_ZERO_PAGE		(1UL<<(63-48))	/* zero the page before mapping (ignored for IO pages) */
+#define H_COPY_PAGE		(1UL<<(63-49))
+#define H_N			(1UL<<(63-61))
+#define H_PP1			(1UL<<(63-62))
+#define H_PP2			(1UL<<(63-63))
+
+
+
+/* pSeries hypervisor opcodes */
+#define H_REMOVE		0x04
+#define H_ENTER			0x08
+#define H_READ			0x0c
+#define H_CLEAR_MOD		0x10
+#define H_CLEAR_REF		0x14
+#define H_PROTECT		0x18
+#define H_GET_TCE		0x1c
+#define H_PUT_TCE		0x20
+#define H_SET_SPRG0		0x24
+#define H_SET_DABR		0x28
+#define H_PAGE_INIT		0x2c
+#define H_SET_ASR		0x30
+#define H_ASR_ON		0x34
+#define H_ASR_OFF		0x38
+#define H_LOGICAL_CI_LOAD	0x3c
+#define H_LOGICAL_CI_STORE	0x40
+#define H_LOGICAL_CACHE_LOAD	0x44
+#define H_LOGICAL_CACHE_STORE	0x48
+#define H_LOGICAL_ICBI		0x4c
+#define H_LOGICAL_DCBF		0x50
+#define H_GET_TERM_CHAR		0x54
+#define H_PUT_TERM_CHAR		0x58
+#define H_REAL_TO_LOGICAL	0x5c
+#define H_HYPERVISOR_DATA	0x60
+#define H_EOI			0x64
+#define H_CPPR			0x68
+#define H_IPI			0x6c
+#define H_IPOLL			0x70
+#define H_XIRR			0x74
+
+#define HSC			".long 0x44000022\n"
+#define H_ENTER_r3		"li	3, 0x08\n"
+
+/* plpar_hcall() -- Generic call interface using above opcodes
+ *
+ * The actual call interface is a hypervisor call instruction with
+ * the opcode in R3 and input args in R4-R7.
+ * Status is returned in R3 with variable output values in R4-R11.
+ * Only H_PTE_READ with H_READ_4 uses R6-R11 so we ignore it for now
+ * and return only two out args which MUST ALWAYS BE PROVIDED.
+ */
+long plpar_hcall(unsigned long opcode,
+		 unsigned long arg1,
+		 unsigned long arg2,
+		 unsigned long arg3,
+		 unsigned long arg4,
+		 unsigned long *out1,
+		 unsigned long *out2,
+		 unsigned long *out3);
+
+/* Same as plpar_hcall but for those opcodes that return no values
+ * other than status.  Slightly more efficient.
+ */
+long plpar_hcall_norets(unsigned long opcode, ...);
+