patch-2.4.20 linux-2.4.20/drivers/net/e100/e100_test.c

• Lines: 433
• Date: Thu Nov 28 15:53:13 2002
• Orig file: linux-2.4.19/drivers/net/e100/e100_test.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -urN linux-2.4.19/drivers/net/e100/e100_test.c linux-2.4.20/drivers/net/e100/e100_test.c
@@ -0,0 +1,432 @@
+/*******************************************************************************
+
+  
+  Copyright(c) 1999 - 2002 Intel Corporation. All rights reserved.
+  
+  This program is free software; you can redistribute it and/or modify it 
+  under the terms of the GNU General Public License as published by the Free 
+  Software Foundation; either version 2 of the License, or (at your option) 
+  any later version.
+  
+  This program is distributed in the hope that it will be useful, but WITHOUT 
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for 
+  more details.
+  
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc., 59 
+  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+  
+  The full GNU General Public License is included in this distribution in the
+  file called LICENSE.
+  
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+*******************************************************************************/
+
+#include "e100.h"
+#include "e100_config.h"
+
+extern u16 e100_eeprom_read(struct e100_private *, u16);
+extern int e100_wait_exec_cmplx(struct e100_private *, u32,u8);
+extern void e100_phy_reset(struct e100_private *bdp);
+extern void e100_phy_autoneg(struct e100_private *bdp);
+extern void e100_phy_set_loopback(struct e100_private *bdp);
+extern void e100_force_speed_duplex(struct e100_private *bdp);
+
+static u8 e100_diag_selftest(struct net_device *);
+static u8 e100_diag_eeprom(struct net_device *);
+static u8 e100_diag_loopback(struct net_device *);
+
+static u8 e100_diag_one_loopback (struct net_device *, u8);
+static u8 e100_diag_rcv_loopback_pkt(struct e100_private *);
+static void e100_diag_config_loopback(struct e100_private *, u8, u8, u8 *,u8 *);
+static u8 e100_diag_loopback_alloc(struct e100_private *);
+static void e100_diag_loopback_cu_ru_exec(struct e100_private *);
+static u8 e100_diag_check_pkt(u8 *);
+static void e100_diag_loopback_free(struct e100_private *);
+
+#define LB_PACKET_SIZE 1500
+
+/**
+ * e100_run_diag - main test execution handler - checks mask of requests and calls the diag routines  
+ * @dev: atapter's net device data struct
+ * @test_info: array with test request mask also used to store test results
+ *
+ * RETURNS: updated flags field of struct ethtool_test
+ */
+u32
+e100_run_diag(struct net_device *dev, u64 *test_info, u32 flags)
+{
+	struct e100_private* bdp = dev->priv;
+	u8 test_result = true;
+
+	e100_isolate_driver(bdp);
+
+	if (flags & ETH_TEST_FL_OFFLINE) {
+		u8 fail_mask;
+		
+		fail_mask = e100_diag_selftest(dev);
+		if (fail_mask) {
+			test_result = false;
+			if (fail_mask & REGISTER_TEST_FAIL)
+				test_info [E100_REG_TEST_FAIL] = true;
+			if (fail_mask & ROM_TEST_FAIL)
+				test_info [E100_ROM_TEST_FAIL] = true;
+			if (fail_mask & SELF_TEST_FAIL)
+				test_info [E100_MAC_TEST_FAIL] = true;
+			if (fail_mask & TEST_TIMEOUT)
+				test_info [E100_CHIP_TIMEOUT] = true;
+		}
+
+		fail_mask = e100_diag_loopback(dev);
+		if (fail_mask) {
+			test_result = false;
+			if (fail_mask & PHY_LOOPBACK)
+				test_info [E100_LPBK_PHY_FAIL] = true;
+			if (fail_mask & MAC_LOOPBACK)
+				test_info [E100_LPBK_MAC_FAIL] = true;
+		}
+	}
+
+	if (!e100_diag_eeprom(dev)) {
+		test_result = false;
+		test_info [E100_EEPROM_TEST_FAIL] = true;
+	}
+
+	/* fully recover only if the device is open*/
+	if (netif_running(dev))  {
+		e100_deisolate_driver(bdp, true, false);
+	} else {
+    		e100_deisolate_driver(bdp, false, false);
+	}
+	/*Let card recover from the test*/
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout(HZ * 2);
+
+	return flags | (test_result ? 0 : ETH_TEST_FL_FAILED);
+}
+
+/**
+ * e100_diag_selftest - run hardware selftest 
+ * @dev: atapter's net device data struct
+ */
+static u8
+e100_diag_selftest(struct net_device *dev)
+{
+	struct e100_private *bdp = dev->priv;
+	u32 st_timeout, st_result;
+	u8 retval = 0;
+
+	if (!e100_selftest(bdp, &st_timeout, &st_result)) {
+		if (!st_timeout) {
+			if (st_result & CB_SELFTEST_REGISTER_BIT)
+				retval |= REGISTER_TEST_FAIL;
+			if (st_result & CB_SELFTEST_DIAG_BIT)
+				retval |= SELF_TEST_FAIL;
+			if (st_result & CB_SELFTEST_ROM_BIT)
+				retval |= ROM_TEST_FAIL;
+		} else {
+            		retval = TEST_TIMEOUT;
+		}
+	}
+
+	e100_hw_reset_recover(bdp,PORT_SOFTWARE_RESET);
+
+	return retval;
+}
+
+/**
+ * e100_diag_eeprom - validate eeprom checksum correctness
+ * @dev: atapter's net device data struct
+ *
+ */
+static u8
+e100_diag_eeprom (struct net_device *dev)
+{
+	struct e100_private *bdp = dev->priv;
+	u16 i, eeprom_sum, eeprom_actual_csm;
+
+	for (i = 0, eeprom_sum = 0; i < (bdp->eeprom_size - 1); i++) {
+		eeprom_sum += e100_eeprom_read(bdp, i);
+	}
+
+	eeprom_actual_csm = e100_eeprom_read(bdp, bdp->eeprom_size - 1);
+
+	if (eeprom_actual_csm == (u16)(EEPROM_SUM - eeprom_sum)) {
+		return true;
+	}
+
+	return false;
+}
+
+/**
+ * e100_diag_loopback - performs loopback test  
+ * @dev: atapter's net device data struct
+ */
+static u8
+e100_diag_loopback (struct net_device *dev)
+{
+	u8 rc = 0;
+
+	if (!e100_diag_one_loopback(dev, PHY_LOOPBACK)) {
+		rc |= PHY_LOOPBACK;
+	}
+
+	if (!e100_diag_one_loopback(dev, MAC_LOOPBACK)) {
+		rc |= MAC_LOOPBACK;
+	}
+
+	return rc;
+}
+
+/**
+ * e100_diag_loopback - performs loopback test  
+ * @dev: atapter's net device data struct
+ * @mode: lopback test type
+ */
+static u8
+e100_diag_one_loopback (struct net_device *dev, u8 mode)
+{
+        struct e100_private *bdp = dev->priv;
+        u8 res = false;
+   	u8 saved_dynamic_tbd = false;
+   	u8 saved_extended_tcb = false;
+
+	if (!e100_diag_loopback_alloc(bdp))
+		return false;
+
+	/* change the config block to standard tcb and the correct loopback */
+        e100_diag_config_loopback(bdp, true, mode,
+				  &saved_extended_tcb, &saved_dynamic_tbd);
+
+	e100_diag_loopback_cu_ru_exec(bdp);
+
+        if (e100_diag_rcv_loopback_pkt(bdp)) {
+		res = true;
+	}
+
+        e100_diag_loopback_free(bdp);
+
+        /* change the config block to previous tcb mode and the no loopback */
+        e100_diag_config_loopback(bdp, false, mode,
+				  &saved_extended_tcb, &saved_dynamic_tbd);
+	return res;
+}
+
+/**
+ * e100_diag_config_loopback - setup/clear loopback before/after lpbk test
+ * @bdp: atapter's private data struct
+ * @set_loopback: true if the function is called to set lb
+ * @loopback_mode: the loopback mode(MAC or PHY)
+ * @tcb_extended: true if need to set extended tcb mode after clean loopback
+ * @dynamic_tbd: true if needed to set dynamic tbd mode after clean loopback
+ *
+ */
+void
+e100_diag_config_loopback(struct e100_private* bdp,
+			  u8 set_loopback,
+			  u8 loopback_mode,
+			  u8* tcb_extended,
+			  u8* dynamic_tbd)
+{
+	/* if set_loopback == true - we want to clear tcb_extended/dynamic_tbd.
+	 * the previous values are saved in the params tcb_extended/dynamic_tbd
+	 * if set_loopback == false - we want to restore previous value.
+	 */
+	if (set_loopback || (*tcb_extended))
+		  *tcb_extended = e100_config_tcb_ext_enable(bdp,*tcb_extended);
+
+	if (set_loopback || (*dynamic_tbd))
+		 *dynamic_tbd = e100_config_dynamic_tbd(bdp,*dynamic_tbd);
+
+	if (set_loopback) {
+		/* Configure loopback on MAC */
+		e100_config_loopback_mode(bdp,loopback_mode);
+	} else {
+		e100_config_loopback_mode(bdp,NO_LOOPBACK);
+	}
+
+	e100_config(bdp);
+
+	if (loopback_mode == PHY_LOOPBACK) {
+		if (set_loopback)
+                        /* Set PHY loopback mode */
+                        e100_phy_set_loopback(bdp);
+                else {	/* Back to normal speed and duplex */
+                	if (bdp->params.e100_speed_duplex == E100_AUTONEG)
+				/* Reset PHY and do autoneg */
+                        	e100_phy_autoneg(bdp);
+			else    
+				/* Reset PHY and force speed and duplex */
+				e100_force_speed_duplex(bdp);
+		}
+                /* Wait for PHY state change */
+		set_current_state(TASK_UNINTERRUPTIBLE);
+                schedule_timeout(HZ);
+	} else { /* For MAC loopback wait 500 msec to take effect */
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(HZ / 2);
+	}
+}
+  
+/**
+ * e100_diag_loopback_alloc - alloc & initate tcb and rfd for the loopback
+ * @bdp: atapter's private data struct
+ *
+ */
+static u8
+e100_diag_loopback_alloc(struct e100_private *bdp)
+{
+	dma_addr_t dma_handle;
+	tcb_t *tcb;
+	rfd_t *rfd;
+	tbd_t *tbd;
+
+	/* tcb, tbd and transmit buffer are allocated */
+	tcb = pci_alloc_consistent(bdp->pdev,
+				   (sizeof (tcb_t) + sizeof (tbd_t) +
+				    LB_PACKET_SIZE),
+				   &dma_handle);
+        if (tcb == NULL)
+		return false;
+
+	memset(tcb, 0x00, sizeof (tcb_t) + sizeof (tbd_t) + LB_PACKET_SIZE);
+	tcb->tcb_phys = dma_handle;
+	tcb->tcb_hdr.cb_status = 0;
+	tcb->tcb_hdr.cb_cmd =
+		cpu_to_le16(CB_EL_BIT | CB_TRANSMIT | CB_TX_SF_BIT);
+	/* Next command is null */
+	tcb->tcb_hdr.cb_lnk_ptr = cpu_to_le32(0xffffffff);
+	tcb->tcb_cnt = 0;
+	tcb->tcb_thrshld = bdp->tx_thld;
+	tcb->tcb_tbd_num = 1;
+	/* Set up tcb tbd pointer */
+	tcb->tcb_tbd_ptr = cpu_to_le32(tcb->tcb_phys + sizeof (tcb_t));
+	tbd = (tbd_t *) ((u8 *) tcb + sizeof (tcb_t));
+	/* Set up tbd transmit buffer */
+	tbd->tbd_buf_addr =
+		cpu_to_le32(le32_to_cpu(tcb->tcb_tbd_ptr) + sizeof (tbd_t));
+	tbd->tbd_buf_cnt = __constant_cpu_to_le16(1024);
+	/* The value of first 512 bytes is FF */
+	memset((void *) ((u8 *) tbd + sizeof (tbd_t)), 0xFF, 512);
+	/* The value of second 512 bytes is BA */
+	memset((void *) ((u8 *) tbd + sizeof (tbd_t) + 512), 0xBA, 512);
+	wmb();
+	rfd = pci_alloc_consistent(bdp->pdev, sizeof (rfd_t), &dma_handle);
+
+	if (rfd == NULL) {
+		pci_free_consistent(bdp->pdev,
+				    sizeof (tcb_t) + sizeof (tbd_t) +
+				    LB_PACKET_SIZE, tcb, tcb->tcb_phys);
+		return false;
+	}
+
+	memset(rfd, 0x00, sizeof (rfd_t));
+
+	/* init all fields in rfd */
+	rfd->rfd_header.cb_cmd = cpu_to_le16(RFD_EL_BIT);
+	rfd->rfd_sz = cpu_to_le16(ETH_FRAME_LEN + CHKSUM_SIZE);
+	/* dma_handle is physical address of rfd */
+	bdp->loopback.dma_handle = dma_handle;
+	bdp->loopback.tcb = tcb;
+	bdp->loopback.rfd = rfd;
+	wmb();
+	return true;
+}
+
+/**
+ * e100_diag_loopback_cu_ru_exec - activates cu and ru to send & receive the pkt
+ * @bdp: atapter's private data struct
+ *
+ */
+static void
+e100_diag_loopback_cu_ru_exec(struct e100_private *bdp)
+{
+	/*load CU & RU base */ 
+	if (!e100_wait_exec_cmplx(bdp, 0, SCB_CUC_LOAD_BASE))
+		printk("e100: SCB_CUC_LOAD_BASE failed\n");
+	if(!e100_wait_exec_cmplx(bdp, 0, SCB_RUC_LOAD_BASE))
+		printk("e100: SCB_RUC_LOAD_BASE failed!\n");
+	if(!e100_wait_exec_cmplx(bdp, bdp->loopback.dma_handle, SCB_RUC_START))
+		printk("e100: SCB_RUC_START failed!\n");
+
+	bdp->next_cu_cmd = START_WAIT;
+	e100_start_cu(bdp, bdp->loopback.tcb);
+	bdp->last_tcb = NULL;
+	rmb();
+}
+/**
+ * e100_diag_check_pkt - checks if a given packet is a loopback packet
+ * @bdp: atapter's private data struct
+ *
+ * Returns true if OK false otherwise.
+ */
+static u8
+e100_diag_check_pkt(u8 *datap)
+{
+	int i;
+	for (i = 0; i<512; i++) {
+		if( !((*datap)==0xFF && (*(datap + 512) == 0xBA)) ) {
+			printk (KERN_ERR "e100: check loopback packet failed at: %x\n", i);
+			return false;
+			}
+	}
+	printk (KERN_DEBUG "e100: Check received loopback packet OK\n");
+	return true;
+}
+
+/**
+ * e100_diag_rcv_loopback_pkt - waits for receive and checks lpbk packet
+ * @bdp: atapter's private data struct
+ *
+ * Returns true if OK false otherwise.
+ */
+static u8
+e100_diag_rcv_loopback_pkt(struct e100_private* bdp) 
+{    
+	rfd_t *rfdp;
+	u16 rfd_status;
+	unsigned long expires = jiffies + HZ * 2;
+
+        rfdp =bdp->loopback.rfd;
+
+        rfd_status = le16_to_cpu(rfdp->rfd_header.cb_status);
+
+        while (!(rfd_status & RFD_STATUS_COMPLETE)) { 
+		if (time_before(jiffies, expires)) {
+			yield();
+			rmb();
+			rfd_status = le16_to_cpu(rfdp->rfd_header.cb_status);
+		} else {
+			break;
+		}
+        }
+
+        if (rfd_status & RFD_STATUS_COMPLETE) {
+		printk(KERN_DEBUG "e100: Loopback packet received\n");
+                return e100_diag_check_pkt(((u8 *)rfdp+bdp->rfd_size));
+	}
+	else {
+		printk(KERN_ERR "e100: Loopback packet not received\n");
+		return false;
+	}
+}
+
+/**
+ * e100_diag_loopback_free - free data allocated for loopback pkt send/receive
+ * @bdp: atapter's private data struct
+ *
+ */
+static void
+e100_diag_loopback_free (struct e100_private *bdp)
+{
+        pci_free_consistent(bdp->pdev,
+			    sizeof(tcb_t) + sizeof(tbd_t) + LB_PACKET_SIZE,
+			    bdp->loopback.tcb, bdp->loopback.tcb->tcb_phys);
+
+        pci_free_consistent(bdp->pdev, sizeof(rfd_t), bdp->loopback.rfd,
+			    bdp->loopback.dma_handle);
+}
+