patch-2.4.19 linux-2.4.19/drivers/usb/hcd/ehci-hub.c

• Lines: 344
• Date: Fri Aug 2 17:39:44 2002
• Orig file: linux-2.4.18/drivers/usb/hcd/ehci-hub.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -urN linux-2.4.18/drivers/usb/hcd/ehci-hub.c linux-2.4.19/drivers/usb/hcd/ehci-hub.c
@@ -0,0 +1,343 @@
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ * 
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* this file is part of ehci-hcd.c */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Root Hub ... the nonsharable stuff
+ *
+ * Registers don't need cpu_to_le32, that happens transparently
+ */
+
+/*-------------------------------------------------------------------------*/
+
+static int check_reset_complete (
+	struct ehci_hcd	*ehci,
+	int		index,
+	int		port_status
+) {
+	if (!(port_status & PORT_CONNECT)) {
+		ehci->reset_done [index] = 0;
+		return port_status;
+	}
+
+	/* if reset finished and it's still not enabled -- handoff */
+	if (!(port_status & PORT_PE)) {
+		dbg ("%s port %d full speed, give to companion, 0x%x",
+			ehci->hcd.bus_name, index + 1, port_status);
+
+		// what happens if HCS_N_CC(params) == 0 ?
+		port_status |= PORT_OWNER;
+		writel (port_status, &ehci->regs->port_status [index]);
+
+	} else
+		dbg ("%s port %d high speed", ehci->hcd.bus_name, index + 1);
+
+	return port_status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+
+/* build "status change" packet (one or two bytes) from HC registers */
+
+static int
+ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
+{
+	struct ehci_hcd	*ehci = hcd_to_ehci (hcd);
+	u32		temp, status = 0;
+	int		ports, i, retval = 1;
+	unsigned long	flags;
+
+	/* init status to no-changes */
+	buf [0] = 0;
+	ports = HCS_N_PORTS (ehci->hcs_params);
+	if (ports > 7) {
+		buf [1] = 0;
+		retval++;
+	}
+	
+	/* no hub change reports (bit 0) for now (power, ...) */
+
+	/* port N changes (bit N)? */
+	spin_lock_irqsave (&ehci->lock, flags);
+	for (i = 0; i < ports; i++) {
+		temp = readl (&ehci->regs->port_status [i]);
+		if (temp & PORT_OWNER) {
+			/* don't report this in GetPortStatus */
+			if (temp & PORT_CSC) {
+				temp &= ~PORT_CSC;
+				writel (temp, &ehci->regs->port_status [i]);
+			}
+			continue;
+		}
+		if (!(temp & PORT_CONNECT))
+			ehci->reset_done [i] = 0;
+		if ((temp & (PORT_CSC | PORT_PEC | PORT_OCC)) != 0) {
+			if (i < 7)
+			    buf [0] |= 1 << (i + 1);
+			else
+			    buf [1] |= 1 << (i - 7);
+			status = STS_PCD;
+		}
+	}
+	spin_unlock_irqrestore (&ehci->lock, flags);
+	return status ? retval : 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void
+ehci_hub_descriptor (
+	struct ehci_hcd			*ehci,
+	struct usb_hub_descriptor	*desc
+) {
+	int		ports = HCS_N_PORTS (ehci->hcs_params);
+	u16		temp;
+
+	desc->bDescriptorType = 0x29;
+	desc->bPwrOn2PwrGood = 0;	/* FIXME: f(system power) */
+	desc->bHubContrCurrent = 0;
+
+	desc->bNbrPorts = ports;
+	temp = 1 + (ports / 8);
+	desc->bDescLength = 7 + 2 * temp;
+
+	/* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+	memset (&desc->bitmap [0], 0, temp);
+	memset (&desc->bitmap [temp], 0xff, temp);
+
+	temp = 0x0008;			/* per-port overcurrent reporting */
+	if (HCS_PPC (ehci->hcs_params))
+		temp |= 0x0001;		/* per-port power control */
+	if (HCS_INDICATOR (ehci->hcs_params))
+		temp |= 0x0080;		/* per-port indicators (LEDs) */
+	desc->wHubCharacteristics = cpu_to_le16 (temp);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int ehci_hub_control (
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength
+) {
+	struct ehci_hcd	*ehci = hcd_to_ehci (hcd);
+	int		ports = HCS_N_PORTS (ehci->hcs_params);
+	u32		temp, status;
+	unsigned long	flags;
+	int		retval = 0;
+
+	/*
+	 * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
+	 * HCS_INDICATOR may say we can change LEDs to off/amber/green.
+	 * (track current state ourselves) ... blink for diagnostics,
+	 * power, "this is the one", etc.  EHCI spec supports this.
+	 */
+
+	spin_lock_irqsave (&ehci->lock, flags);
+	switch (typeReq) {
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			/* no hub-wide feature/status flags */
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		temp = readl (&ehci->regs->port_status [wIndex]);
+		if (temp & PORT_OWNER)
+			break;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			writel (temp & ~PORT_PE,
+				&ehci->regs->port_status [wIndex]);
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			writel (temp | PORT_PEC,
+				&ehci->regs->port_status [wIndex]);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+		case USB_PORT_FEAT_C_SUSPEND:
+			/* ? */
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (HCS_PPC (ehci->hcs_params))
+				writel (temp & ~PORT_POWER,
+					&ehci->regs->port_status [wIndex]);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			writel (temp | PORT_CSC,
+				&ehci->regs->port_status [wIndex]);
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			writel (temp | PORT_OCC,
+				&ehci->regs->port_status [wIndex]);
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			/* GetPortStatus clears reset */
+			break;
+		default:
+			goto error;
+		}
+		readl (&ehci->regs->command);	/* unblock posted write */
+		break;
+	case GetHubDescriptor:
+		ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
+			buf);
+		break;
+	case GetHubStatus:
+		/* no hub-wide feature/status flags */
+		memset (buf, 0, 4);
+		//cpu_to_le32s ((u32 *) buf);
+		break;
+	case GetPortStatus:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		status = 0;
+		temp = readl (&ehci->regs->port_status [wIndex]);
+
+		// wPortChange bits
+		if (temp & PORT_CSC)
+			status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+		if (temp & PORT_PEC)
+			status |= 1 << USB_PORT_FEAT_C_ENABLE;
+		// USB_PORT_FEAT_C_SUSPEND
+		if (temp & PORT_OCC)
+			status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
+
+		/* whoever resets must GetPortStatus to complete it!! */
+		if ((temp & PORT_RESET)
+				&& jiffies > ehci->reset_done [wIndex]) {
+			status |= 1 << USB_PORT_FEAT_C_RESET;
+
+			/* force reset to complete */
+			writel (temp & ~PORT_RESET,
+					&ehci->regs->port_status [wIndex]);
+			do {
+				temp = readl (
+					&ehci->regs->port_status [wIndex]);
+				udelay (10);
+			} while (temp & PORT_RESET);
+
+			/* see what we found out */
+			temp = check_reset_complete (ehci, wIndex, temp);
+		}
+
+		// don't show wPortStatus if it's owned by a companion hc
+		if (!(temp & PORT_OWNER)) {
+			if (temp & PORT_CONNECT) {
+				status |= 1 << USB_PORT_FEAT_CONNECTION;
+				status |= 1 << USB_PORT_FEAT_HIGHSPEED;
+			}
+			if (temp & PORT_PE)
+				status |= 1 << USB_PORT_FEAT_ENABLE;
+			if (temp & PORT_SUSPEND)
+				status |= 1 << USB_PORT_FEAT_SUSPEND;
+			if (temp & PORT_OC)
+				status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+			if (temp & PORT_RESET)
+				status |= 1 << USB_PORT_FEAT_RESET;
+			if (temp & PORT_POWER)
+				status |= 1 << USB_PORT_FEAT_POWER;
+		}
+
+#ifndef	EHCI_VERBOSE_DEBUG
+	if (status & ~0xffff)	/* only if wPortChange is interesting */
+#endif
+		dbg_port (hcd, "GetStatus", wIndex + 1, temp);
+		// we "know" this alignment is good, caller used kmalloc()...
+		*((u32 *) buf) = cpu_to_le32 (status);
+		break;
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			/* no hub-wide feature/status flags */
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case SetPortFeature:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		temp = readl (&ehci->regs->port_status [wIndex]);
+		if (temp & PORT_OWNER)
+			break;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			writel (temp | PORT_SUSPEND,
+				&ehci->regs->port_status [wIndex]);
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (HCS_PPC (ehci->hcs_params))
+				writel (temp | PORT_POWER,
+					&ehci->regs->port_status [wIndex]);
+			break;
+		case USB_PORT_FEAT_RESET:
+			/* line status bits may report this as low speed */
+			if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
+					&& PORT_USB11 (temp)) {
+				dbg ("%s port %d low speed, give to companion",
+					hcd->bus_name, wIndex + 1);
+				temp |= PORT_OWNER;
+			} else {
+				vdbg ("%s port %d reset",
+					hcd->bus_name, wIndex + 1);
+				temp |= PORT_RESET;
+				temp &= ~PORT_PE;
+
+				/*
+				 * caller must wait, then call GetPortStatus
+				 * usb 2.0 spec says 50 ms resets on root
+				 */
+				ehci->reset_done [wIndex] = jiffies
+				    	+ ((50 /* msec */ * HZ) / 1000);
+			}
+			writel (temp, &ehci->regs->port_status [wIndex]);
+			break;
+		default:
+			goto error;
+		}
+		readl (&ehci->regs->command);	/* unblock posted writes */
+		break;
+
+	default:
+error:
+		/* "stall" on error */
+		retval = -EPIPE;
+	}
+	spin_unlock_irqrestore (&ehci->lock, flags);
+	return retval;
+}