patch-2.4.19 linux-2.4.19/Documentation/networking/vortex.txt
Next file: linux-2.4.19/Documentation/pci.txt
Previous file: linux-2.4.19/Documentation/networking/slicecom.txt
Back to the patch index
Back to the overall index
- Lines: 38
- Date:
Fri Aug 2 17:39:42 2002
- Orig file:
linux-2.4.18/Documentation/networking/vortex.txt
- Orig date:
Sun Aug 12 12:27:36 2001
diff -urN linux-2.4.18/Documentation/networking/vortex.txt linux-2.4.19/Documentation/networking/vortex.txt
@@ -117,6 +117,12 @@
will force full-duplex 100base-TX, rather than allowing the usual
autonegotiation.
+global_options=N
+
+ Sets the `options' parameter for all 3c59x NICs in the machine.
+ Entries in the `options' array above will override any setting of
+ this.
+
full_duplex=N1,N2,N3...
Similar to bit 9 of 'options'. Forces the corresponding card into
@@ -126,6 +132,11 @@
In fact, please don't use this at all! You're better off getting
autonegotiation working properly.
+global_full_duplex=N1
+
+ Sets full duplex mode for all 3c59x NICs in the machine. Entries
+ in the `full_duplex' array above will override any setting of this.
+
flow_ctrl=N1,N2,N3...
Use 802.3x MAC-layer flow control. The 3com cards only support the
@@ -211,6 +222,12 @@
Becker's `ether-wake' application may be used to wake suspended
machines.
+ Also enables the NIC's power management support.
+
+global_enable_wol=N
+
+ Sets enable_wol mode for all 3c59x NICs in the machine. Entries in
+ the `enable_wol' array above will override any setting of this.
Media selection
---------------
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)