patch-2.4.11-dontuse linux/drivers/scsi/ChangeLog.serverraid

• Lines: 118
• Date: Sun Sep 30 12:26:08 2001
• Orig file: v2.4.10/linux/drivers/scsi/ChangeLog.serverraid
• Orig date: Mon Aug 30 10:43:25 1999

diff -u --recursive --new-file v2.4.10/linux/drivers/scsi/ChangeLog.serverraid linux/drivers/scsi/ChangeLog.serverraid
@@ -1,25 +1,103 @@
-Change Log
-~~~~~~~~~~
+IBM ServeRAID driver Change Log
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-	1.00.00 - Initial Public Release
-		- Functionally equivalent to 0.99.05
+        4.80.20  - Set max_sectors in Scsi_Host structure ( if >= 2.4.7 kernel )
+                 - 5 second delay needed after resetting an i960 adapter
+        
+        4.80.14  - Take all semaphores off stack                    
+                   Clean Up New_IOCTL path
+                   
+        4.80.04  - Eliminate calls to strtok() if 2.4.x or greater 
+                 - Adjustments to Device Queue Depth               
+
+        4.80.00  - Make ia64 Safe    
+        
+        4.72.01  - I/O Mapped Memory release ( so "insmod ips" does not Fail )    
+                   Don't Issue Internal FFDC Command if there are Active Commands 
+                   Close Window for getting too many IOCTL's active 
+                   
+        4.72.00  - Allow for a Scatter-Gather Element to exceed MAX_XFER Size     
+        
+        4.71.00  - Change all memory allocations to not use GFP_DMA flag 
+                   Code Clean-Up for 2.4.x kernel      
+        
+        4.70.15  - Fix Breakup for very large ( non-SG ) requests
+        
+        4.70.13  - Don't release HA Lock in ips_next() until SC taken off queue  
+                 - Unregister SCSI device in ips_release()                        
+                 - Don't Send CDB's if we already know the device is not present  
+                 
+        4.70.12  - Corrective actions for bad controller ( during initialization )
+        
+        4.70.09  - Use a Common ( Large Buffer ) for Flashing from the JCRM CD    
+                 - Add IPSSEND Flash Support                                      
+                 - Set Sense Data for Unknown SCSI Command                        
+                 - Use Slot Number from NVRAM Page 5 
+                 - Restore caller's DCDB Structure
+                                       
+        4.20.14  - Update patch files for kernel 2.4.0-test5
+
+        4.20.13  - Fix some failure cases / reset code
+                 - Hook into the reboot_notifier to flush the controller
+                   cache
+
+        4.20.03 - Rename version to coincide with new release schedules
+                - Performance fixes
+                - Fix truncation of /proc files with cat
+                - Merge in changes through kernel 2.4.0test1ac21
+
+        4.10.13 - Fix for dynamic unload and proc file system
+
+        4.10.00 - Add support for ServeRAID 4M/4L
+
+        4.00.06 - Fix timeout with initial FFDC command
+
+        4.00.05 - Remove wish_block from init routine
+                - Use linux/spinlock.h instead of asm/spinlock.h for kernels
+                  2.3.18 and later
+                - Sync with other changes from the 2.3 kernels
+
+        4.00.04 - Rename structures/constants to be prefixed with IPS_
+
+        4.00.03 - Add alternative passthru interface
+                - Add ability to flash ServeRAID BIOS
+
+        4.00.02 - Fix problem with PT DCDB with no buffer
+
+        4.00.01 - Add support for First Failure Data Capture
+
+        4.00.00 - Add support for ServeRAID 4
+
+        3.60.02 - Make DCDB direction based on lookup table.
+                - Only allow one DCDB command to a SCSI ID at a time.
+
+        3.60.01 - Remove bogus error check in passthru routine.
+
+        3.60.00 - Bump max commands to 128 for use with ServeRAID
+                  firmware 3.60.
+                - Change version to 3.60 to coincide with ServeRAID release
+                  numbering.
+
+        1.00.00 - Initial Public Release
+                - Functionally equivalent to 0.99.05
 
         0.99.05 - Fix an oops on certain passthru commands
 
-	0.99.04 - Fix race condition in the passthru mechanism
+        0.99.04 - Fix race condition in the passthru mechanism
                   -- this required the interface to the utilities to change
-		- Fix error recovery code
+                - Fix error recovery code
 
-	0.99.03 - Make interrupt routine handle all completed request on the
-		  adapter not just the first one
-		- Make sure passthru commands get woken up if we run out of
-		  SCBs
-		- Send all of the commands on the queue at once rather than
-		  one at a time since the card will support it.
+        0.99.03 - Make interrupt routine handle all completed request on the
+                  adapter not just the first one
+                - Make sure passthru commands get woken up if we run out of
+                  SCBs
+                - Send all of the commands on the queue at once rather than
+                  one at a time since the card will support it.
 
-	0.99.02 - Added some additional debug statements to print out
+        0.99.02 - Added some additional debug statements to print out
                   errors if an error occurs while trying to read/write
                   to a logical drive (IPS_DEBUG).
 
-                  Fixed read/write errors when the adapter is using an
+                - Fixed read/write errors when the adapter is using an
                   8K stripe size.
+