patch-2.3.99-pre1 linux/arch/sparc64/config.in

• Lines: 75
• Date: Mon Mar 13 09:35:13 2000
• Orig file: v2.3.51/linux/arch/sparc64/config.in
• Orig date: Thu Mar 2 14:36:22 2000

diff -u --recursive --new-file v2.3.51/linux/arch/sparc64/config.in linux/arch/sparc64/config.in
@@ -1,4 +1,4 @@
-# $Id: config.in,v 1.99 2000/02/27 19:34:17 davem Exp $
+# $Id: config.in,v 1.101 2000/03/13 05:49:55 jj Exp $
 # For a description of the syntax of this configuration file,
 # see the Configure script.
 #
@@ -98,29 +98,22 @@
 tristate 'Loopback device support' CONFIG_BLK_DEV_LOOP
 tristate 'Network block device support' CONFIG_BLK_DEV_NBD
 
-if [ "$CONFIG_PCI" = "y" ]; then
-   tristate 'Ultra/PCI IDE disk/cdrom/tape/floppy support' CONFIG_BLK_DEV_IDE
-   if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
-      dep_tristate '  Include IDE/ATA-2 DISK support' CONFIG_BLK_DEV_IDEDISK $CONFIG_BLK_DEV_IDE
-      dep_tristate '  Include IDE/ATAPI CDROM support' CONFIG_BLK_DEV_IDECD $CONFIG_BLK_DEV_IDE
-      dep_tristate '  Include IDE/ATAPI TAPE support' CONFIG_BLK_DEV_IDETAPE $CONFIG_BLK_DEV_IDE
-      dep_tristate '  Include IDE/ATAPI FLOPPY support' CONFIG_BLK_DEV_IDEFLOPPY $CONFIG_BLK_DEV_IDE
-      dep_tristate '  SCSI emulation support' CONFIG_BLK_DEV_IDESCSI $CONFIG_BLK_DEV_IDE
-      define_bool CONFIG_BLK_DEV_IDEPCI y
-      define_bool CONFIG_BLK_DEV_IDEDMA y
-      define_bool CONFIG_IDEDMA_AUTO y
-      define_bool CONFIG_IDEDMA_NEW_DRIVE_LISTINGS y
-      define_bool CONFIG_BLK_DEV_NS87415 y
-      define_bool CONFIG_BLK_DEV_CMD64X y
-      define_bool CONFIG_BLK_DEV_IDE_MODES y
-   fi
+if [ "$CONFIG_NET" = "y" ]; then
+   source net/Config.in
 fi
 
-endmenu
+mainmenu_option next_comment
+comment 'ATA/IDE/MFM/RLL support'
 
-if [ "$CONFIG_NET" = "y" ]; then
-   source net/Config.in
+tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
+
+if [ "$CONFIG_IDE" != "n" ]; then
+  source drivers/ide/Config.in
+else
+  define_bool CONFIG_BLK_DEV_IDE_MODES n
+  define_bool CONFIG_BLK_DEV_HD n
 fi
+endmenu
 
 mainmenu_option next_comment
 comment 'SCSI support'
@@ -172,12 +165,16 @@
   	 bool '  Collect statistics to report in /proc' CONFIG_AIC7XXX_PROC_STATS N
 	 int  '  Delay in seconds after SCSI bus reset' CONFIG_AIC7XXX_RESET_DELAY 5
       fi
+      dep_tristate 'NCR53C8XX SCSI support' CONFIG_SCSI_NCR53C8XX $CONFIG_SCSI
       dep_tristate 'SYM53C8XX SCSI support' CONFIG_SCSI_SYM53C8XX $CONFIG_SCSI
-      if [ "$CONFIG_SCSI_SYM53C8XX" != "n" ]; then
+      if [ "$CONFIG_SCSI_NCR53C8XX" != "n" -o "$CONFIG_SCSI_SYM53C8XX" != "n" ]; then
 	 int 'default tagged command queue depth' CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS 8
 	 int 'maximum number of queued commands' CONFIG_SCSI_NCR53C8XX_MAX_TAGS 32
 	 int 'synchronous transfers frequency in MHz' CONFIG_SCSI_NCR53C8XX_SYNC 10
 	 bool '  enable profiling' CONFIG_SCSI_NCR53C8XX_PROFILE
+         if [ "$CONFIG_SCSI_SYM53C8XX" != "n" ]; then
+	    bool '  include support for the NCR PQS/PDS SCSI card' CONFIG_SCSI_NCR53C8XX_PQS_PDS
+         fi
 	 if [ "$CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS" = "0" ]; then
 	    bool '  not allow targets to disconnect' CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
 	 fi
@@ -219,7 +216,7 @@
       mainmenu_option next_comment
       comment 'Ethernet (10 or 100Mbit)'
 
-      bool 'Sun LANCE support' CONFIG_SUNLANCE
+      tristate 'Sun LANCE support' CONFIG_SUNLANCE
       tristate 'Sun Happy Meal 10/100baseT support' CONFIG_HAPPYMEAL
       if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
 	 tristate 'Sun BigMAC 10/100baseT support (EXPERIMENTAL)' CONFIG_SUNBMAC