patch-2.3.37 linux/drivers/usb/README.hid

• Lines: 163
• Date: Wed Dec 31 16:00:00 1969
• Orig file: v2.3.36/linux/drivers/usb/README.hid
• Orig date: Tue Jan 4 13:57:17 2000

diff -u --recursive --new-file v2.3.36/linux/drivers/usb/README.hid linux/drivers/usb/README.hid
@@ -1,162 +0,0 @@
-			   Linux HID driver v0.8
-		 (c) 1999 Vojtech Pavlik <vojtech@suse.cz>
-		    (c) 1999 Andreas Gal <agal@uwsp.edu>
-			     Sponsored by SuSE
-----------------------------------------------------------------------------
-
-0. Disclaimer
-~~~~~~~~~~~~~
-  This program is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 2 of the License, or (at your option)
-any later version.
-
-  This program is distributed in the hope that it will be useful, but
-WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-more details.
-
-  You should have received a copy of the GNU General Public License along
-with this program; if not, write to the Free Software Foundation, Inc., 59
-Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-  Should you need to contact me, the author, you can do so either by e-mail
-- mail your message to <vojtech@suse.cz>, or by paper mail: Vojtech Pavlik,
-Ucitelska 1576, Prague 8, 182 00 Czech Republic
-
-  For your convenience, the GNU General Public License version 2 is included
-in the package: See the file COPYING.
-
-1. Introduction
-~~~~~~~~~~~~~~~
-  This is a driver for USB devices conforming to the USB HID (Human Input
-Device) standard. These devices include namely keyboards, mice and
-joysticks.
-
-  However many other devices (monitors, speakers, UPSs ...) also communicate
-through the same protocol, which makes its specification somewhat bloated.
-This isn't a problem, though, because the driver doesn't need to know about
-all the possible devices it can control, and can just parse the protocol and
-leave the rest of the job (for example understanding what the UPS wants to
-say) to the userland.
-
-  Because of this, the USB HID driver has two interfaces. One is via the
-proc filesystem, allowing userland applications send and read arbitrary
-reports to and from a connected USB device. The other is via a very simple
-yet generic input device driver, which dispatches input events (keystrokes,
-mouse or joystick movements) to specific, backward compatible userland
-interfaces. This way a PS/2 mouse, an AT keyboard or a Linux joystick driver
-interface are emulated, and allow applications to immediately work with USB
-mice, USB keyboards and USB joysticks without any changes.
-
-  The input driver is aimed for a little more than USB device handling in
-the future, though. It's generic enough so that it can be used for any
-mouse, keyboard or joystick (and more, of course). A PS/2 mouse driver, a
-serial mouse, Sun mouse, and most of the busmouse drivers were rewritten to
-use this as well as the AT keyboard and Sun keyboard drivers. This will
-hopefully allow conversion of all Linux keyboard and mouse and joystick
-drivers to this scheme.
-
-  This effort has it's home page at:
-
-	http://www.suse.cz/development/input/
-
-You'll find both the latest HID driver and the complete Input driver there.
-There is also a mailing list for this:
-
-	listproc@atrey.karlin.mff.cuni.cz
-
-Send "subscribe linux-joystick Your Name" to subscribe to it.
-
-2. Usage
-~~~~~~~~
-  Since the driver comes with recent 2.3 kernels, all that's needed to use
-it is to enable it either as a module or compiled-in into the kernel. 
-
-  After that, after reboot (and possibly also inserting the USB and HID
-modules) the following will happen:
-
-* If you selected keyboard support, all USB keystrokes will be also routed
-  to the Linux keyboard driver as if being input through the ordinary system
-  keyboard.
-
-* If you selected mouse support, there will be (one or more) simulated PS/2
-  mouse devices on major 10, minor 32, 33 and more. These simulated mice can
-  in addition to a standard 3-button PS/2 mouse behave like MS Intellimice,
-  with a wheel. If you want to use the wheel, just specify '-t imps2' to gpm
-  and 'Protocol "ImPS/2"' to X, and it will work. A single emulated mouse
-  device can be open by any number of processes (unlike the /dev/psaux), and
-  for each of them the emulation is separate, each can use a different mode.
-  The mousedev driver, which emulates the mice, can also emulate a Genius
-  NewScroll 5 buttons-and-a-wheel mouse, if you set it to a Genius PS/2
-  mode ('-t netmouse' 'Protocol "NetMousePS/2"'). However, not gpm, nor X
-  can decode the 5 buttons yet, so this isn't very useful right now.
-
-* If you selected joystick support, the driver will take over major 15, the
-  joystick major number, and will emulate joysticks on it. This means the
-  normal joystick driver can't be used together with it (now, after the
-  normal joystick drivers are converted to the input scheme, all will work
-  nicely together). Also, you'll probably need to calibrate your joystick
-  manually ('man jscal') to be able to use it, because the USB
-  autocalibration is far from perfect yet.
-
-* If you selected event device support, there will be devices on major 10,
-  minors 64, 65 and more for each input device connected through this
-  driver. These devices output raw events the input driver dispatches. Each
-  has a timestamp. This hopefully will be THE way X will talk to keyboard
-  and mice, because it's hardware independent, and not limited by existing
-  de-facto standards.
-
-3. Verifying if it works
-~~~~~~~~~~~~~~~~~~~~~~~~
-  Typing a couple keys on the keyboard should be enough to check that a USB
-keyboard works and is correctly connected to the kernel keyboard driver.
-
-  Doing a cat /dev/hidmouse (c, 10, 32) will verify that a mouse is also
-emulated, characters should appear if you move it.
-
-  You can test the joystick emulation with the 'jstest' utility, available
-in the joystick package (see Documentation/joystick.txt).
-
-  You can test the event devics with the 'evtest' utitily available on the
-input driver homepage (see the URL above).
-
-4. FAQ
-~~~~~~
-Q: Why aren't any questions here yet?
-A: Because none were frequent enough yet.
-
-5. Event interface
-~~~~~~~~~~~~~~~~~~
-  Should you want to add event device support into any application (X, gpm,
-svgalib ...) I (vojtech@suse.cz) will be happy to provide you any help I
-can. Here goes a description of the current state of things, which is going
-to be extended, but not changed incompatibly as time goes:
-
-  You can use blocking and nonblocking reads, also select() on the
-/dev/inputX devices, and you'll always get a whole number of input events on
-a read. Their layout is:
-
-struct input_event {
-	struct timeval time;
-	unsigned short type;
-	unsigned short code;
-	unsigned int value;
-};
-
-  'time' is the timestamp, it returns the time at which the event happened.
-Type is for example EV_REL for relative momement, REL_KEY for a keypress or
-release. More types are defined in include/linux/input.h.
-
-  'code' is event code, for example REL_X or KEY_BACKSPACE, again a complete
-list is in include/linux/input.h.
-
-  'value' is the value the event carries. Either a relative change for
-EV_REL, absolute new value for EV_ABS (joysticks ...), or 0 for EV_KEY for
-release, 1 for keypress and 2 for autorepeat.
-
-6. Proc interface
-~~~~~~~~~~~~~~~~~
-  For HID-specific devices there is also the /proc interface. It isn't
-present in this release yet, though, so it's description will appear here
-together with the code in the driver.