patch-2.3.27 linux/drivers/isdn/hisax/netjet.c
Next file: linux/drivers/isdn/hisax/niccy.c
Previous file: linux/drivers/isdn/hisax/mic.c
Back to the patch index
Back to the overall index
- Lines: 246
- Date:
Sun Nov 7 16:34:00 1999
- Orig file:
v2.3.26/linux/drivers/isdn/hisax/netjet.c
- Orig date:
Tue Sep 7 12:14:06 1999
diff -u --recursive --new-file v2.3.26/linux/drivers/isdn/hisax/netjet.c linux/drivers/isdn/hisax/netjet.c
@@ -1,4 +1,4 @@
-/* $Id: netjet.c,v 1.13 1999/08/11 21:01:31 keil Exp $
+/* $Id: netjet.c,v 1.16 1999/10/14 20:25:29 keil Exp $
* netjet.c low level stuff for Traverse Technologie NETJet ISDN cards
*
@@ -7,6 +7,15 @@
* Thanks to Traverse Technologie Australia for documents and informations
*
* $Log: netjet.c,v $
+ * Revision 1.16 1999/10/14 20:25:29 keil
+ * add a statistic for error monitoring
+ *
+ * Revision 1.15 1999/09/04 06:20:06 keil
+ * Changes from kernel set_current_state()
+ *
+ * Revision 1.14 1999/08/31 11:20:25 paul
+ * various spelling corrections (new checksums may be needed, Karsten!)
+ *
* Revision 1.13 1999/08/11 21:01:31 keil
* new PCI codefix
*
@@ -59,9 +68,6 @@
#include "hscx.h"
#include "isdnl1.h"
#include <linux/pci.h>
-#ifndef COMPAT_HAS_NEW_PCI
-#include <linux/bios32.h>
-#endif
#include <linux/interrupt.h>
#include <linux/ppp_defs.h>
@@ -75,7 +81,7 @@
extern const char *CardType[];
-const char *NETjet_revision = "$Revision: 1.13 $";
+const char *NETjet_revision = "$Revision: 1.16 $";
#define byteout(addr,val) outb(val,addr)
#define bytein(addr) inb(addr)
@@ -406,7 +412,6 @@
if (!(skb = dev_alloc_skb(count)))
printk(KERN_WARNING "TIGER: receive out of memory\n");
else {
- SET_SKB_FREE(skb);
memcpy(skb_put(skb, count), bcs->hw.tiger.rcvbuf, count);
skb_queue_tail(&bcs->rqueue, skb);
}
@@ -526,19 +531,26 @@
debugl1(bcs->cs, "tiger: frame not byte aligned");
state=HDLC_FLAG_SEARCH;
bcs->hw.tiger.r_err++;
+#ifdef ERROR_STATISTIC
+ bcs->err_inv++;
+#endif
} else {
if (bcs->cs->debug & L1_DEB_HSCX)
debugl1(bcs->cs,"tiger frame end(%d,%d): fcs(%x) i %x",
i,j,bcs->hw.tiger.r_fcs, bcs->cs->hw.njet.irqstat0);
if (bcs->hw.tiger.r_fcs == PPP_GOODFCS) {
got_frame(bcs, (bitcnt>>3)-3);
- } else
+ } else {
if (bcs->cs->debug) {
debugl1(bcs->cs, "tiger FCS error");
printframe(bcs->cs, bcs->hw.tiger.rcvbuf,
(bitcnt>>3)-1, "rec");
bcs->hw.tiger.r_err++;
}
+#ifdef ERROR_STATISTIC
+ bcs->err_crc++;
+#endif
+ }
state=HDLC_FLAG_FOUND;
}
bitcnt=0;
@@ -556,10 +568,13 @@
if ((state == HDLC_FRAME_FOUND) &&
!(bitcnt & 7)) {
if ((bitcnt>>3)>=HSCX_BUFMAX) {
- debugl1(bcs->cs, "tiger: frame to big");
+ debugl1(bcs->cs, "tiger: frame too big");
r_val=0;
state=HDLC_FLAG_SEARCH;
bcs->hw.tiger.r_err++;
+#ifdef ERROR_STATISTIC
+ bcs->err_inv++;
+#endif
} else {
bcs->hw.tiger.rcvbuf[(bitcnt>>3)-1] = r_val;
bcs->hw.tiger.r_fcs =
@@ -584,6 +599,12 @@
if ((cs->hw.njet.irqstat0 & cs->hw.njet.last_is0) & NETJET_IRQM0_READ) {
debugl1(cs,"tiger warn read double dma %x/%x",
cs->hw.njet.irqstat0, cs->hw.njet.last_is0);
+#ifdef ERROR_STATISTIC
+ if (cs->bcs[0].mode)
+ cs->bcs[0].err_rdo++;
+ if (cs->bcs[1].mode)
+ cs->bcs[1].err_rdo++;
+#endif
return;
} else {
cs->hw.njet.last_is0 &= ~NETJET_IRQM0_READ;
@@ -705,7 +726,7 @@
if (bcs->st->lli.l1writewakeup &&
(PACKET_NOACK != bcs->tx_skb->pkt_type))
bcs->st->lli.l1writewakeup(bcs->st, bcs->tx_skb->len);
- idev_kfree_skb(bcs->tx_skb, FREE_WRITE);
+ dev_kfree_skb(bcs->tx_skb);
bcs->tx_skb = NULL;
}
test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag);
@@ -755,6 +776,12 @@
if ((cs->hw.njet.irqstat0 & cs->hw.njet.last_is0) & NETJET_IRQM0_WRITE) {
debugl1(cs,"tiger warn write double dma %x/%x",
cs->hw.njet.irqstat0, cs->hw.njet.last_is0);
+#ifdef ERROR_STATISTIC
+ if (cs->bcs[0].mode)
+ cs->bcs[0].err_tx++;
+ if (cs->bcs[1].mode)
+ cs->bcs[1].err_tx++;
+#endif
return;
} else {
cs->hw.njet.last_is0 &= ~NETJET_IRQM0_WRITE;
@@ -842,7 +869,7 @@
discard_queue(&bcs->rqueue);
discard_queue(&bcs->squeue);
if (bcs->tx_skb) {
- idev_kfree_skb(bcs->tx_skb, FREE_WRITE);
+ dev_kfree_skb(bcs->tx_skb);
bcs->tx_skb = NULL;
test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag);
}
@@ -889,8 +916,8 @@
}
-void __init
-inittiger(struct IsdnCardState *cs)
+__initfunc(void
+inittiger(struct IsdnCardState *cs))
{
if (!(cs->bcs[0].hw.tiger.send = kmalloc(NETJET_DMA_TXSIZE * sizeof(unsigned int),
GFP_KERNEL | GFP_DMA))) {
@@ -1027,11 +1054,11 @@
sti();
cs->hw.njet.ctrl_reg = 0xff; /* Reset On */
byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
- current->state = TASK_INTERRUPTIBLE;
+ set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout((10*HZ)/1000); /* Timeout 10ms */
cs->hw.njet.ctrl_reg = 0x00; /* Reset Off and status read clear */
byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
- current->state = TASK_INTERRUPTIBLE;
+ set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout((10*HZ)/1000); /* Timeout 10ms */
restore_flags(flags);
cs->hw.njet.auxd = 0;
@@ -1074,23 +1101,15 @@
return(0);
}
-#ifdef COMPAT_HAS_NEW_PCI
static struct pci_dev *dev_netjet __initdata = NULL;
-#else
-static int pci_index __initdata = 0;
-#endif
-int __init
-setup_netjet(struct IsdnCard *card)
+__initfunc(int
+setup_netjet(struct IsdnCard *card))
{
int bytecnt;
struct IsdnCardState *cs = card->cs;
char tmp[64];
#if CONFIG_PCI
-#ifndef COMPAT_HAS_NEW_PCI
- u_char pci_bus, pci_device_fn, pci_irq;
- u_int pci_ioaddr, found;
-#endif
#endif
strcpy(tmp, NETjet_revision);
printk(KERN_INFO "HiSax: Traverse Tech. NETjet driver Rev. %s\n", HiSax_getrev(tmp));
@@ -1098,7 +1117,6 @@
return(0);
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
#if CONFIG_PCI
-#ifdef COMPAT_HAS_NEW_PCI
if (!pci_present()) {
printk(KERN_ERR "Netjet: no PCI bus present\n");
return(0);
@@ -1110,7 +1128,7 @@
printk(KERN_WARNING "NETjet: No IRQ for PCI card found\n");
return(0);
}
- cs->hw.njet.base = get_pcibase(dev_netjet, 0)
+ cs->hw.njet.base = dev_netjet->resource[ 0].start
& PCI_BASE_ADDRESS_IO_MASK;
if (!cs->hw.njet.base) {
printk(KERN_WARNING "NETjet: No IO-Adr for PCI card found\n");
@@ -1120,41 +1138,6 @@
printk(KERN_WARNING "NETjet: No PCI card found\n");
return(0);
}
-#else
- found = 0;
- for (; pci_index < 0xff; pci_index++) {
- if (pcibios_find_device(PCI_VENDOR_TRAVERSE_TECH,
- PCI_NETJET_ID, pci_index, &pci_bus, &pci_device_fn)
- == PCIBIOS_SUCCESSFUL)
- found = 1;
- else
- continue;
- /* get IRQ */
- pcibios_read_config_byte(pci_bus, pci_device_fn,
- PCI_INTERRUPT_LINE, &pci_irq);
-
- /* get IO address */
- pcibios_read_config_dword(pci_bus, pci_device_fn,
- PCI_BASE_ADDRESS_0, &pci_ioaddr);
- if (found)
- break;
- }
- if (!found) {
- printk(KERN_WARNING "NETjet: No PCI card found\n");
- return(0);
- }
- pci_index++;
- if (!pci_irq) {
- printk(KERN_WARNING "NETjet: No IRQ for PCI card found\n");
- return(0);
- }
- if (!pci_ioaddr) {
- printk(KERN_WARNING "NETjet: No IO-Adr for PCI card found\n");
- return(0);
- }
- cs->hw.njet.base = pci_ioaddr & PCI_BASE_ADDRESS_IO_MASK;
- cs->irq = pci_irq;
-#endif /* COMPAT_HAS_NEW_PCI */
cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA;
cs->hw.njet.isac = cs->hw.njet.base | NETJET_ISAC_OFF;
bytecnt = 256;
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)