patch-2.3.21 linux/drivers/net/wan/cycx_drv.c

Next file: linux/drivers/net/wan/cycx_main.c
Previous file: linux/drivers/net/wan/cosa.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.3.20/linux/drivers/net/wan/cycx_drv.c linux/drivers/net/wan/cycx_drv.c
@@ -0,0 +1,660 @@
+/*
+* cycx_drv.c	cycx Support Module.
+*
+*		This module is a library of common hardware-specific
+*		functions used by all Cyclades sync and some async (8x & 16x)
+*		drivers.
+*
+* Copyright:	(c) 1998, 1999 Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+*
+* Author:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+*
+* Based on sdladrv.c by Gene Kozin <genek@compuserve.com>
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* 1999/05/28    acme		cycx_intack & cycx_intde gone for good
+* 1999/05/18	acme		lots of unlogged work, submitting to Linus...
+* 1999/01/03	acme		more judicious use of data types
+* 1999/01/03	acme		judicious use of data types :>
+*				cycx_inten trying to reset pending interrupts
+*				from cyclom 2x - I think this isn't the way to
+*				go, but for now...
+* 1999/01/02	acme		cycx_intack ok, I think there's nothing to do
+*				to ack an int in cycx_drv.c, only handle it in
+*				cyx_isr (or in the other protocols: cyp_isr,
+*				cyf_isr, when they get implemented.
+* Dec 31, 1998	Arnaldo         cycx_data_boot & cycx_code_boot fixed, crossing
+*				fingers to see x25_configure in cycx_x25.c
+*				work... :)
+* Dec 26, 1998	Arnaldo         load implementation fixed, seems to work! :)
+*				cycx_2x_dpmbase_options with all the possible
+*				DPM addresses (20).
+*				cycx_intr implemented (test this!)
+*				general code cleanup
+* Dec  8, 1998	Ivan Passos	Cyclom-2X firmware load implementation.
+* Aug  8, 1998	Arnaldo		Initial version.
+*/
+
+#ifdef MODULE
+#ifdef MODVERSIONS
+#include <linux/modversions.h>
+#endif
+#include <linux/module.h>
+#else
+#define EXPORT_SYMBOL(function)
+#endif
+#include <linux/kernel.h>	/* printk(), and other useful stuff */
+#include <linux/stddef.h>	/* offsetof(), etc. */
+#include <linux/errno.h>	/* return codes */
+#include <linux/sched.h>	/* for jiffies, HZ, etc. */
+#include <linux/cycx_drv.h>	/* API definitions */
+#include <linux/cycx_cfm.h>	/* CYCX firmware module definitions */
+#include <linux/delay.h>	/* udelay */
+#include <asm/io.h>		/* for inb(), outb(), etc. */
+
+#define	MOD_VERSION	0
+#define	MOD_RELEASE	2
+
+#ifdef MODULE
+MODULE_AUTHOR("Arnaldo Carvalho de Melo");
+MODULE_DESCRIPTION("Cyclades Sync Cards Driver.");
+#endif
+
+/* Function Prototypes */
+/* Module entry points. These are called by the OS and must be public. */
+int init_module (void);
+void cleanup_module (void);
+
+/* Hardware-specific functions */
+static int cycx_detect (cycxhw_t *hw);
+static int cycx_load (cycxhw_t *hw, cfm_t *cfm, u32 len);
+static int cycx_init (cycxhw_t *hw);
+static int cycx_reset (cycxhw_t *hw);
+static void cycx_bootcfg (cycxhw_t *hw);
+
+static int init_cycx_2x (cycxhw_t *hw);
+static int reset_cycx_2x (u32 addr);
+static int detect_cycx_2x (u32 addr);
+
+/* Miscellaneous functions */
+static void delay_cycx (int sec);
+static int get_option_index (u32 *optlist, u32 optval);
+static u16 checksum (u8 *buf, u32 len);
+
+#define wait_cyc(addr) cycx_exec(addr + CMD_OFFSET)
+
+/* Global Data
+ * Note: All data must be explicitly initialized!!! */
+
+/* private data */
+static char modname[] = "cycx_drv";
+static char fullname[] = "Cyclom X Support Module";
+static char copyright[]	= "(c) 1998, 1999 Arnaldo Carvalho de Melo";
+
+/* Hardware configuration options.
+ * These are arrays of configuration options used by verification routines.
+ * The first element of each array is its size (i.e. number of options).
+ */
+static u32 cycx_2x_dpmbase_options[] =
+{
+	20,
+	0xA0000, 0xA4000, 0xA8000, 0xAC000, 0xB0000, 0xB4000, 0xB8000,
+	0xBC000, 0xC0000, 0xC4000, 0xC8000, 0xCC000, 0xD0000, 0xD4000,
+	0xD8000, 0xDC000, 0xE0000, 0xE4000, 0xE8000, 0xEC000
+};
+
+static u32 cycx_2x_irq_options[]  = { 7, 3, 5, 9, 10, 11, 12, 15 };
+
+/* Kernel Loadable Module Entry Points */
+/* Module 'insert' entry point.
+ * o print announcement
+ * o initialize static data
+ *
+ * Return:	0	Ok
+ *		< 0	error.
+ * Context:	process */
+#ifdef MODULE
+int init_module (void)
+{
+	printk(KERN_INFO "%s v%u.%u %s\n",
+		fullname, MOD_VERSION, MOD_RELEASE, copyright);
+	return 0;
+}
+/* Module 'remove' entry point.
+ * o release all remaining system resources */
+void cleanup_module (void)
+{
+}
+#endif
+/* Kernel APIs */
+/* Set up adapter.
+ * o detect adapter type
+ * o verify hardware configuration options
+ * o check for hardware conflicts
+ * o set up adapter shared memory
+ * o test adapter memory
+ * o load firmware
+ * Return:	0	ok.
+ *		< 0	error */
+EXPORT_SYMBOL(cycx_setup);
+int cycx_setup (cycxhw_t *hw, void *cfm, u32 len)
+{
+	u32 *irq_opt = NULL;	/* IRQ options */
+	u32 *dpmbase_opt = NULL;/* DPM window base options */
+	int err = 0;
+
+	if (cycx_detect(hw)) {
+		printk(KERN_ERR "%s: adapter Cyclom %uX not found at "
+				"address 0x%lX!\n",
+			modname, hw->type, (unsigned long) hw->dpmbase);
+		return -EINVAL;
+	}
+
+	printk(KERN_INFO "%s: found Cyclom %uX card at address 0x%lx.\n",
+			 modname, hw->type, (unsigned long) hw->dpmbase);
+
+	switch (hw->type) {
+		case CYCX_2X:
+			irq_opt	= cycx_2x_irq_options;
+			dpmbase_opt = cycx_2x_dpmbase_options;
+			break;
+		default:
+			printk(KERN_ERR "%s: unknown card.\n", modname);
+			return -EINVAL;
+	}
+
+	/* Verify IRQ configuration options */
+	if (!get_option_index(irq_opt, hw->irq)) {
+		printk (KERN_ERR "%s: IRQ %d is illegal!\n", modname, hw->irq);
+		return -EINVAL;
+	} 
+
+	/* Setup adapter dual-port memory window and test memory */
+	if (!hw->dpmbase) {
+		printk(KERN_ERR "%s: you must specify the dpm address!\n",
+				modname);
+ 		return -EINVAL;
+	}
+	else if (!get_option_index(dpmbase_opt, hw->dpmbase)) {
+		printk(KERN_ERR "%s: memory address 0x%lX is illegal!\n",
+				modname, (unsigned long) hw->dpmbase);
+		return -EINVAL;
+	}
+
+	hw->dpmsize = CYCX_WINDOWSIZE;
+	/* FIXME! Is this the only amount ever available? */
+	hw->memory = 0x40000;
+
+	cycx_init(hw);
+
+	printk(KERN_INFO "%s: dual-port memory window is set at 0x%lX.\n",
+			 modname, (unsigned long) hw->dpmbase);
+	printk(KERN_INFO "%s: found %luK bytes of on-board memory.\n",
+			 modname, (unsigned long) hw->memory / 1024);
+
+	/* Load firmware. If loader fails then shut down adapter */
+	err = cycx_load(hw, cfm, len);
+	if (err) cycx_down(hw);		/* shutdown adapter */
+	return err;
+} 
+
+/* Shut down CYCX: disable shared memory access and interrupts, stop CPU,etc.*/ 
+EXPORT_SYMBOL(cycx_down);
+int cycx_down (cycxhw_t *hw)
+{
+	return 0; /* FIXME: anything needed here? */
+}
+
+/* Enable interrupt generation.  */
+EXPORT_SYMBOL(cycx_inten);
+int cycx_inten (cycxhw_t *hw)
+{
+	switch (hw->type) {
+		case CYCX_2X: writeb (0, hw->dpmbase); break;
+		default: return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Generate an interrupt to adapter's CPU. */
+EXPORT_SYMBOL(cycx_intr);
+int cycx_intr (cycxhw_t *hw)
+{
+	switch (hw->type) {
+		case CYCX_2X:
+			writew(0, hw->dpmbase + GEN_CYCX_INTR);
+			return 0;
+		default: return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Execute Adapter Command.
+ * o Set exec flag.
+ * o Busy-wait until flag is reset. */
+EXPORT_SYMBOL(cycx_exec);
+int cycx_exec (u32 addr)
+{
+	u16 i = 0;
+	/* wait till addr content is zeroed */
+
+	while (readw(addr) != 0) {
+		udelay(1000);
+		if (++i > 50) return -1;
+	}
+
+	return 0;
+}
+
+/* Read absolute adapter memory.
+ * Transfer data from adapter's memory to data buffer. */
+EXPORT_SYMBOL(cycx_peek);
+int cycx_peek (cycxhw_t *hw, u32 addr, void *buf, u32 len)
+{
+	if (len == 1)	*(u8*)buf = readb (hw->dpmbase + addr);
+	else 		memcpy_fromio(buf, hw->dpmbase + addr, len);
+
+	return 0;
+}
+
+/* Write Absolute Adapter Memory.
+ * Transfer data from data buffer to adapter's memory. */
+EXPORT_SYMBOL(cycx_poke);
+int cycx_poke (cycxhw_t *hw, u32 addr, void *buf, u32 len)
+{
+	if (len == 1) writeb (*(u8*)buf, hw->dpmbase + addr);
+	else	      memcpy_toio(hw->dpmbase + addr, buf, len);
+
+	return 0;
+}
+
+/* Hardware-Specific Functions */
+/* Detect adapter type.
+ * o if adapter type is specified then call detection routine for that adapter
+ *   type.  Otherwise call detection routines for every adapter types until
+ *   adapter is detected.
+ *
+ * Notes:
+ * 1) Detection tests are destructive! Adapter will be left in shutdown state
+ *    after the test. */
+static int cycx_detect (cycxhw_t *hw)
+{
+	int err = 0;
+
+	if (!hw->dpmbase) return -EFAULT;
+
+	switch (hw->type) {
+		case CYCX_2X:
+			if (!detect_cycx_2x(hw->dpmbase)) err = -ENODEV;
+			break;
+		default:
+			if (detect_cycx_2x(hw->dpmbase)) hw->type = CYCX_2X;
+			else err = -ENODEV;
+	}
+
+	return err;
+}
+
+/* Load Aux Routines */
+/* Reset board hardware.
+   return 1 if memory exists at addr and 0 if not. */
+static int memory_exists(u32 addr)
+{
+	int timeout = 0;
+
+	for (; timeout < 3 ; timeout++) {
+		writew (TEST_PATTERN, addr + 0x10);
+
+		if (readw (addr + 0x10) == TEST_PATTERN)
+			if (readw (addr + 0x10) == TEST_PATTERN) return 1;
+
+		delay_cycx(1);
+	}
+
+	return 0;
+}
+
+/* Reset board hardware. */
+static int cycx_reset(cycxhw_t *hw)
+{
+	/* Reset board */
+	switch (hw->type) {
+		case CYCX_2X: return reset_cycx_2x(hw->dpmbase);
+	}
+
+	return -EINVAL;
+}
+
+/* Load reset code. */
+static void reset_load(u32 addr, u8 *buffer, u32 cnt)
+{
+	u32 pt_code = addr + RESET_OFFSET;
+	u16 i, j;
+
+	for ( i = 0 ; i < cnt ; i++) {
+		for (j = 0 ; j < 50 ; j++); /* Delay - FIXME busy waiting... */
+		writeb(*buffer++, pt_code++);
+	}
+}
+
+/* Load buffer using boot interface.
+ * o copy data from buffer to Cyclom-X memory
+ * o wait for reset code to copy it to right portion of memory */
+static int buffer_load(u32 addr, u8 *buffer, u32 cnt)
+{
+	memcpy_toio(addr + DATA_OFFSET, buffer, cnt);
+	writew(GEN_BOOT_DAT, addr + CMD_OFFSET);
+	return wait_cyc(addr);
+}
+
+/* Set up entry point and kick start Cyclom-X CPU. */
+static void cycx_start (u32 addr)
+{
+	/* put in 0x30 offset the jump instruction to the code entry point */
+	writeb(0xea, addr + 0x30);
+	writeb(0x00, addr + 0x31);
+	writeb(0xc4, addr + 0x32);
+	writeb(0x00, addr + 0x33);
+	writeb(0x00, addr + 0x34);
+
+	/* cmd to start executing code */
+	writew(GEN_START, addr + CMD_OFFSET);
+}         
+
+/* Load and boot reset code. */
+static void cycx_reset_boot(u32 addr, u8 *code, u32 len)
+{
+	u32 pt_start = addr + START_OFFSET;
+
+        writeb(0xea, pt_start++); /* jmp to f000:3f00 */
+        writeb(0x00, pt_start++);
+        writeb(0xfc, pt_start++);
+        writeb(0x00, pt_start++);
+        writeb(0xf0, pt_start);
+	reset_load(addr, code, len);
+
+	/* 80186 was in hold, go */
+	writeb(0, addr + START_CPU);
+	delay_cycx(1);
+}
+
+/* Load data.bin file through boot (reset) interface. */
+static int cycx_data_boot(u32 addr, u8 *code, u32 len)
+{
+	u32 pt_boot_cmd = addr + CMD_OFFSET;
+	u32 i;
+
+	/* boot buffer lenght */
+	writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16));
+	writew(GEN_DEFPAR, pt_boot_cmd);
+
+	if (wait_cyc(addr) < 0) return 2;
+
+	writew(0, pt_boot_cmd + sizeof(u16));
+	writew(0x4000, pt_boot_cmd + 2 * sizeof(u16));
+	writew(GEN_SET_SEG, pt_boot_cmd);
+
+	if (wait_cyc(addr) < 0) return 2;
+
+	for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ)
+		if (buffer_load(addr, code + i,
+				MIN(CFM_LOAD_BUFSZ, (len - i))) < 0) {
+			printk(KERN_ERR "%s: Error !!\n", modname);
+			return 4;
+		}
+
+	return 0;
+}
+
+
+/* Load code.bin file through boot (reset) interface. */
+static int cycx_code_boot(u32 addr, u8 *code, u32 len)
+{
+	u32 pt_boot_cmd = addr + CMD_OFFSET;
+	u32 i;
+
+	/* boot buffer lenght */
+	writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16));
+	writew(GEN_DEFPAR, pt_boot_cmd);
+
+	if (wait_cyc(addr) == -1) return 2;
+
+	writew(0x0000, pt_boot_cmd + sizeof(u16));
+	writew(0xc400, pt_boot_cmd + 2 * sizeof(u16));
+	writew(GEN_SET_SEG, pt_boot_cmd);
+
+	if (wait_cyc(addr) == -1) return 1;
+
+	for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ)
+		if (buffer_load(addr, code + i,MIN(CFM_LOAD_BUFSZ,(len - i)))) {
+			printk(KERN_ERR "%s: Error !!\n", modname);
+			return 4;
+		}
+
+	return 0;
+}
+
+/* Initialize CYCX hardware: setup memory window, IRQ, etc. */
+static int cycx_init (cycxhw_t *hw)
+{
+	switch (hw->type) {
+		case CYCX_2X: return init_cycx_2x(hw);
+	}
+
+	return -EINVAL;
+}
+
+/* Load adapter from the memory image of the CYCX firmware module. 
+ * o verify firmware integrity and compatibility
+ * o start adapter up */
+static int cycx_load (cycxhw_t *hw, cfm_t *cfm, u32 len)
+{
+	int i, j, status;
+	cycx_header_t *img_hdr;
+	u8 *reset_image,
+	   *data_image,
+	   *code_image;
+	u32 pt_cycld = hw->dpmbase + 0x400;
+	u16 cksum;
+
+	/* Announce */
+	printk(KERN_INFO "%s: firmware signature=\"%s\"\n",
+			 modname, cfm->signature); 
+
+	/* Verify firmware signature */
+	if (strcmp(cfm->signature, CFM_SIGNATURE)) {
+		printk(KERN_ERR "%s:cycx_load: not Cyclom-2X firmware!\n",
+				modname);
+		return -EINVAL;
+	}
+
+	printk(KERN_INFO "%s: firmware version=%u\n", modname, cfm->version);
+
+	/* Verify firmware module format version */
+	if (cfm->version != CFM_VERSION) {
+		printk(KERN_ERR "%s:cycx_load: firmware format %u rejected! "
+				"Expecting %u.\n",
+				modname, cfm->version, CFM_VERSION);
+		return -EINVAL;
+	}
+
+	/* Verify firmware module length and checksum */
+	cksum = checksum((u8*)&cfm->info, sizeof(cfm_info_t) +
+					      cfm->info.codesize);
+/*
+        FIXME cfm->info.codesize is off by 2
+	if (((len - sizeof(cfm_t) - 1) != cfm->info.codesize) ||
+*/
+	if (cksum != cfm->checksum) {
+		printk(KERN_ERR "%s:cycx_load: firmware corrupted!\n", modname);
+		printk(KERN_ERR " cdsize = 0x%x (expected 0x%lx)\n",
+                       len - sizeof(cfm_t) - 1, cfm->info.codesize);
+                printk(KERN_ERR " chksum = 0x%x (expected 0x%x)\n",
+                       cksum, cfm->checksum);
+		return -EINVAL;
+	}
+
+	/* If everything is ok, set reset, data and code pointers */
+
+	img_hdr = (cycx_header_t*)(((u8*) cfm) + sizeof(cfm_t) - 1);
+#ifdef FIRMWARE_DEBUG
+	printk(KERN_INFO "%s:cycx_load: image sizes\n", modname);
+	printk(KERN_INFO " reset=%lu\n", img_hdr->reset_size);
+	printk(KERN_INFO "  data=%lu\n", img_hdr->data_size);
+	printk(KERN_INFO "  code=%lu\n", img_hdr->code_size);
+#endif
+	reset_image = ((u8 *) img_hdr) + sizeof(cycx_header_t);
+	data_image = reset_image + img_hdr->reset_size;
+	code_image = data_image + img_hdr->data_size;
+
+	/*---- Start load ----*/
+        /* Announce */
+	printk(KERN_INFO "%s: loading firmware %s (ID=%u)...\n", modname,
+		(cfm->descr[0] != '\0') ? cfm->descr : "unknown firmware",
+		cfm->info.codeid);
+
+	for (i = 0 ; i < 5 ; i++) {
+		/* Reset Cyclom hardware */
+		if ((status = cycx_reset(hw)) != 0) {
+			printk(KERN_ERR "%s: dpm problem or board not "
+					"found (%d).\n", modname, status);
+			return -EINVAL;
+		}
+
+		/* Load reset.bin */
+                cycx_reset_boot(hw->dpmbase, reset_image, img_hdr->reset_size);
+		/* reset is waiting for boot */
+		writew(GEN_POWER_ON, pt_cycld);
+		delay_cycx(1);
+
+		for (j = 0 ; j < 3 ; j++)
+			if (!readw(pt_cycld)) goto reset_loaded;
+			else delay_cycx(1);
+	}
+
+	printk(KERN_ERR "%s: reset not started.\n", modname);
+	return -EINVAL;
+reset_loaded:
+	/* Load data.bin */
+	if((status = cycx_data_boot(hw->dpmbase, data_image, 
+		                    img_hdr->data_size)) != 0) {
+		printk(KERN_ERR "%s: cannot load data file (%d).\n",
+				modname, status);
+		return -EINVAL;
+	}
+
+	/* Load code.bin */
+	if((status = cycx_code_boot(hw->dpmbase, code_image, 
+		                    img_hdr->code_size)) != 0) {
+		printk(KERN_ERR "%s: cannot load code file (%d).\n",
+				modname, status);
+		return -EINVAL;
+	}
+
+	/* Prepare boot-time configuration data */
+	cycx_bootcfg(hw);
+
+	/* kick-off CPU */
+	cycx_start(hw->dpmbase);
+
+	/* Arthur Ganzert's tip: wait a while after the firmware loading...
+	   seg abr 26 17:17:12 EST 1999 - acme */
+	delay_cycx(7);
+	printk(KERN_INFO "%s: firmware loaded!\n", modname);
+
+	/* enable interrupts */
+        if (cycx_inten(hw)) {
+		printk(KERN_ERR "%s: adapter hardware failure!\n", modname);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/* Prepare boot-time firmware configuration data.
+ * o initialize configuration data area
+   From async.doc - V_3.4.0 - 07/18/1994
+   - As of now, only static buffers are available to the user.
+     So, the bit VD_RXDIRC must be set in 'valid'. That means that user
+     wants to use the static transmission and reception buffers. */
+static void cycx_bootcfg (cycxhw_t *hw)
+{
+	/* use fixed buffers */
+	writeb(FIXED_BUFFERS, hw->dpmbase + CONF_OFFSET); 
+}
+
+/* Initialize CYCX_2X adapter. */
+static int init_cycx_2x (cycxhw_t *hw)
+{
+	if (!detect_cycx_2x(hw->dpmbase)) return -ENODEV;
+	return 0;
+}
+
+/* Detect Cyclom 2x adapter.
+ *	Following tests are used to detect Cyclom 2x adapter:
+ *       to be completed based on the tests done below
+ *	Return 1 if detected o.k. or 0 if failed.
+ *	Note:	This test is destructive! Adapter will be left in shutdown
+ *		state after the test. */
+static int detect_cycx_2x (u32 addr)
+{
+	printk(KERN_INFO "%s: looking for a cyclom 2x at 0x%lX...\n",
+			 modname, (unsigned long) addr);
+
+	reset_cycx_2x(addr);
+	return memory_exists(addr);
+}
+
+/* Miscellaneous */
+/* Get option's index into the options list.
+ *	Return option's index (1 .. N) or zero if option is invalid. */
+static int get_option_index (u32 *optlist, u32 optval)
+{
+	int i = 1;
+	for (; i <= optlist[0]; ++i) if (optlist[i] == optval) return i;
+	return 0;
+}
+
+/* Reset adapter's CPU. */
+static int reset_cycx_2x (u32 addr)
+{
+	writeb (0, addr + RST_ENABLE);  delay_cycx (2);
+	writeb (0, addr + RST_DISABLE); delay_cycx (2);
+	return memory_exists(addr) ? 0 : 1;
+}
+
+/* Delay */
+static void delay_cycx (int sec)
+{
+/* acme
+   Thu dez 31 21:45:16 EDT 1998
+   FIXME I'll keep this comment here just in case, as of now I don't
+   know it all the contexts where this routine is used are interruptible... */
+
+	current->state = TASK_INTERRUPTIBLE;
+	schedule_timeout(sec*HZ);
+}
+
+/* Calculate 16-bit CRC using CCITT polynomial. */
+static u16 checksum (u8 *buf, u32 len)
+{
+	u16 crc = 0;
+	u16 mask, flag;
+
+	for (; len; --len, ++buf)
+		for (mask = 0x80; mask; mask >>= 1) {
+			flag = (crc & 0x8000);
+			crc <<= 1;
+			crc |= ((*buf & mask) ? 1 : 0);
+			if (flag) crc ^= 0x1021;
+		}
+
+	return crc;
+}
+/* End */

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)