patch-2.3.19 linux/drivers/char/radio-trust.c
Next file: linux/drivers/char/radio-zoltrix.c
Previous file: linux/drivers/char/radio-terratec.c
Back to the patch index
Back to the overall index
- Lines: 355
- Date:
Wed Sep 29 14:02:59 1999
- Orig file:
v2.3.18/linux/drivers/char/radio-trust.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.3.18/linux/drivers/char/radio-trust.c linux/drivers/char/radio-trust.c
@@ -0,0 +1,354 @@
+/* radio-trust.c - Trust FM Radio card driver for Linux 2.2
+ * by Eric Lammerts <eric@scintilla.utwente.nl>
+ *
+ * Based on radio-aztech.c. Original notes:
+ *
+ * Adapted to support the Video for Linux API by
+ * Russell Kroll <rkroll@exploits.org>. Based on original tuner code by:
+ *
+ * Quay Ly
+ * Donald Song
+ * Jason Lewis (jlewis@twilight.vtc.vsc.edu)
+ * Scott McGrath (smcgrath@twilight.vtc.vsc.edu)
+ * William McGrath (wmcgrath@twilight.vtc.vsc.edu)
+ *
+ * The basis for this code may be found at http://bigbang.vtc.vsc.edu/fmradio/
+ */
+
+#include <stdarg.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <linux/videodev.h>
+#include <linux/config.h> /* CONFIG_RADIO_TRUST_PORT */
+
+/* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */
+
+#ifndef CONFIG_RADIO_TRUST_PORT
+#define CONFIG_RADIO_TRUST_PORT -1
+#endif
+
+static int io = CONFIG_RADIO_TRUST_PORT;
+static int ioval = 0xf;
+static int users = 0;
+static __u16 curvol;
+static __u16 curbass;
+static __u16 curtreble;
+static unsigned long curfreq;
+static int curstereo;
+static int curmute;
+
+/* i2c addresses */
+#define TDA7318_ADDR 0x88
+#define TSA6060T_ADDR 0xc4
+
+#define TR_DELAY do { inb(io); inb(io); inb(io); } while(0)
+#define TR_SET_SCL outb(ioval |= 2, io)
+#define TR_CLR_SCL outb(ioval &= 0xfd, io)
+#define TR_SET_SDA outb(ioval |= 1, io)
+#define TR_CLR_SDA outb(ioval &= 0xfe, io)
+
+static void write_i2c(int n, ...)
+{
+ unsigned char val, mask;
+ va_list args;
+
+ va_start(args, n);
+
+ /* start condition */
+ TR_SET_SDA;
+ TR_SET_SCL;
+ TR_DELAY;
+ TR_CLR_SDA;
+ TR_CLR_SCL;
+ TR_DELAY;
+
+ for(; n; n--) {
+ val = va_arg(args, unsigned);
+ for(mask = 0x80; mask; mask >>= 1) {
+ if(val & mask)
+ TR_SET_SDA;
+ else
+ TR_CLR_SDA;
+ TR_SET_SCL;
+ TR_DELAY;
+ TR_CLR_SCL;
+ TR_DELAY;
+ }
+ /* acknowledge bit */
+ TR_SET_SDA;
+ TR_SET_SCL;
+ TR_DELAY;
+ TR_CLR_SCL;
+ TR_DELAY;
+ }
+
+ /* stop condition */
+ TR_CLR_SDA;
+ TR_DELAY;
+ TR_SET_SCL;
+ TR_DELAY;
+ TR_SET_SDA;
+ TR_DELAY;
+
+ va_end(args);
+}
+
+static void tr_setvol(__u16 vol)
+{
+ curvol = vol / 2048;
+ write_i2c(2, TDA7318_ADDR, curvol ^ 0x1f);
+}
+
+static int basstreble2chip[15] = {
+ 0, 1, 2, 3, 4, 5, 6, 7, 14, 13, 12, 11, 10, 9, 8
+};
+
+static void tr_setbass(__u16 bass)
+{
+ curbass = bass / 4370;
+ write_i2c(2, TDA7318_ADDR, 0x60 | basstreble2chip[curbass]);
+}
+
+static void tr_settreble(__u16 treble)
+{
+ curtreble = treble / 4370;
+ write_i2c(2, TDA7318_ADDR, 0x70 | basstreble2chip[curtreble]);
+}
+
+static void tr_setstereo(int stereo)
+{
+ curstereo = !!stereo;
+ ioval = (ioval & 0xfb) | (!curstereo << 2);
+ outb(ioval, io);
+}
+
+static void tr_setmute(int mute)
+{
+ curmute = !!mute;
+ ioval = (ioval & 0xf7) | (curmute << 3);
+ outb(ioval, io);
+}
+
+static int tr_getsigstr(void)
+{
+ int i, v;
+
+ for(i = 0, v = 0; i < 100; i++) v |= inb(io);
+ return (v & 1)? 0 : 0xffff;
+}
+
+static int tr_getstereo(void)
+{
+ /* don't know how to determine it, just return the setting */
+ return curstereo;
+}
+
+static void tr_setfreq(unsigned long f)
+{
+ f /= 160; /* Convert to 10 kHz units */
+ f += 1070; /* Add 10.7 MHz IF */
+
+ write_i2c(5, TSA6060T_ADDR, (f << 1) | 1, f >> 7, 0x60 | ((f >> 15) & 1), 0);
+}
+
+static int tr_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
+{
+ switch(cmd)
+ {
+ case VIDIOCGCAP:
+ {
+ struct video_capability v;
+
+ v.type=VID_TYPE_TUNER;
+ v.channels=1;
+ v.audios=1;
+
+ /* No we don't do pictures */
+ v.maxwidth=0;
+ v.maxheight=0;
+ v.minwidth=0;
+ v.minheight=0;
+
+ strcpy(v.name, "Trust FM Radio");
+
+ if(copy_to_user(arg,&v,sizeof(v)))
+ return -EFAULT;
+
+ return 0;
+ }
+ case VIDIOCGTUNER:
+ {
+ struct video_tuner v;
+
+ if(copy_from_user(&v, arg,sizeof(v))!=0)
+ return -EFAULT;
+
+ if(v.tuner) /* Only 1 tuner */
+ return -EINVAL;
+
+ v.rangelow = 87500 * 16;
+ v.rangehigh = 108000 * 16;
+ v.flags = VIDEO_TUNER_LOW;
+ v.mode = VIDEO_MODE_AUTO;
+
+ v.signal = tr_getsigstr();
+ if(tr_getstereo())
+ v.flags |= VIDEO_TUNER_STEREO_ON;
+
+ strcpy(v.name, "FM");
+
+ if(copy_to_user(arg,&v, sizeof(v)))
+ return -EFAULT;
+
+ return 0;
+ }
+ case VIDIOCSTUNER:
+ {
+ struct video_tuner v;
+
+ if(copy_from_user(&v, arg, sizeof(v)))
+ return -EFAULT;
+ if(v.tuner != 0)
+ return -EINVAL;
+
+ return 0;
+ }
+ case VIDIOCGFREQ:
+ if(copy_to_user(arg, &curfreq, sizeof(curfreq)))
+ return -EFAULT;
+ return 0;
+
+ case VIDIOCSFREQ:
+ {
+ unsigned long f;
+
+ if(copy_from_user(&f, arg, sizeof(curfreq)))
+ return -EFAULT;
+ tr_setfreq(f);
+ return 0;
+ }
+ case VIDIOCGAUDIO:
+ {
+ struct video_audio v;
+
+ memset(&v,0, sizeof(v));
+ v.flags = VIDEO_AUDIO_MUTABLE | VIDEO_AUDIO_VOLUME |
+ VIDEO_AUDIO_BASS | VIDEO_AUDIO_TREBLE;
+ v.mode = curstereo? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO;
+ v.volume = curvol * 2048;
+ v.step = 2048;
+ v.bass = curbass * 4370;
+ v.treble = curtreble * 4370;
+
+ strcpy(v.name, "Trust FM Radio");
+ if(copy_to_user(arg,&v, sizeof(v)))
+ return -EFAULT;
+ return 0;
+ }
+ case VIDIOCSAUDIO:
+ {
+ struct video_audio v;
+
+ if(copy_from_user(&v, arg, sizeof(v)))
+ return -EFAULT;
+ if(v.audio)
+ return -EINVAL;
+
+ tr_setvol(v.volume);
+ tr_setbass(v.bass);
+ tr_settreble(v.treble);
+ tr_setstereo(v.mode & VIDEO_SOUND_STEREO);
+ tr_setmute(v.flags & VIDEO_AUDIO_MUTE);
+ return 0;
+ }
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+
+static int tr_open(struct video_device *dev, int flags)
+{
+ if(users)
+ return -EBUSY;
+ users++;
+ MOD_INC_USE_COUNT;
+ return 0;
+}
+
+static void tr_close(struct video_device *dev)
+{
+ users--;
+ MOD_DEC_USE_COUNT;
+}
+
+static struct video_device trust_radio=
+{
+ "Trust FM Radio",
+ VID_TYPE_TUNER,
+ VID_HARDWARE_TRUST,
+ tr_open,
+ tr_close,
+ NULL, /* Can't read (no capture ability) */
+ NULL, /* Can't write */
+ NULL, /* No poll */
+ tr_ioctl,
+ NULL,
+ NULL
+};
+
+static int __init trust_init(void)
+{
+ if(io == -1) {
+ printk(KERN_ERR "You must set an I/O address with io=0x???\n");
+ return -EINVAL;
+ }
+ if(check_region(io, 2)) {
+ printk(KERN_ERR "trust: port 0x%x already in use\n", io);
+ return -EBUSY;
+ }
+ if(video_register_device(&trust_radio, VFL_TYPE_RADIO)==-1)
+ return -EINVAL;
+
+ request_region(io, 2, "Trust FM Radio");
+
+ printk(KERN_INFO "Trust FM Radio card driver v1.0.\n");
+
+ write_i2c(2, TDA7318_ADDR, 0x80); /* speaker att. LF = 0 dB */
+ write_i2c(2, TDA7318_ADDR, 0xa0); /* speaker att. RF = 0 dB */
+ write_i2c(2, TDA7318_ADDR, 0xc0); /* speaker att. LR = 0 dB */
+ write_i2c(2, TDA7318_ADDR, 0xe0); /* speaker att. RR = 0 dB */
+ write_i2c(2, TDA7318_ADDR, 0x40); /* stereo 1 input, gain = 18.75 dB */
+
+ tr_setvol(0x8000);
+ tr_setbass(0x8000);
+ tr_settreble(0x8000);
+ tr_setstereo(1);
+
+ /* mute card - prevents noisy bootups */
+ tr_setmute(1);
+
+ return 0;
+}
+
+#ifdef MODULE
+
+MODULE_AUTHOR("Eric Lammerts, Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
+MODULE_DESCRIPTION("A driver for the Trust FM Radio card.");
+MODULE_PARM(io, "i");
+MODULE_PARM_DESC(io, "I/O address of the Trust FM Radio card (0x350 or 0x358)");
+
+EXPORT_NO_SYMBOLS;
+
+#endif /* MODULE */
+
+static void __exit cleanup_trust_module(void)
+{
+ video_unregister_device(&trust_radio);
+ release_region(io, 2);
+}
+
+module_init(trust_init);
+module_exit(cleanup_trust_module);
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)