patch-2.3.1 linux/drivers/usb/cpia.h
Next file: linux/drivers/usb/hub.c
Previous file: linux/drivers/usb/cpia.c
Back to the patch index
Back to the overall index
- Lines: 140
- Date:
Thu May 13 14:18:09 1999
- Orig file:
v2.3.0/linux/drivers/usb/cpia.h
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.3.0/linux/drivers/usb/cpia.h linux/drivers/usb/cpia.h
@@ -0,0 +1,139 @@
+#ifndef __LINUX_CPIA_H
+#define __LINUX_CPIA_H
+
+#include <linux/list.h>
+
+#define USB_REQ_CPIA_GET_VERSION 0x01
+#define USB_REQ_CPIA_GET_PNP_ID 0x02
+#define USB_REQ_CPIA_GET_CAMERA_STATUS 0x03
+#define USB_REQ_CPIA_GOTO_HI_POWER 0x04
+#define USB_REQ_CPIA_GOTO_LO_POWER 0x05
+/* No 0x06 */
+#define USB_REQ_CPIA_GOTO_SUSPEND 0x07
+#define USB_REQ_CPIA_GOTO_PASS_THROUGH 0x08
+/* No 0x09 */
+#define USB_REQ_CPIA_MODIFY_CAMERA_STATUS 0x0A
+
+#define USB_REQ_CPIA_READ_VC_REGS 0x21
+#define USB_REQ_CPIA_WRITE_BC_REG 0x22
+#define USB_REQ_CPIA_READ_MC_PORTS 0x23
+#define USB_REQ_CPIA_WRITE_MC_PORT 0x24
+#define USB_REQ_CPIA_SET_BAUD_RATE 0x25
+#define USB_REQ_CPIA_SET_ECP_TIMING 0x26
+#define USB_REQ_CPIA_READ_IDATA 0x27
+#define USB_REQ_CPIA_WRITE_IDATA 0x28
+#define USB_REQ_CPIA_GENERIC_CALL 0x29
+#define USB_REQ_CPIA_I2CSTART 0x2A
+#define USB_REQ_CPIA_I2CSTOP 0x2B
+#define USB_REQ_CPIA_I2CWRITE 0x2C
+#define USB_REQ_CPIA_I2CREAD 0x2D
+
+#define USB_REQ_CPIA_GET_VP_VERSION 0xA1
+#define USB_REQ_CPIA_SET_COLOUR_PARAMS 0xA3
+#define USB_REQ_CPIA_SET_EXPOSURE 0xA4
+/* No 0xA5 */
+#define USB_REQ_CPIA_SET_COLOUR_BALANCE 0xA6
+#define USB_REQ_CPIA_SET_SENSOR_FPS 0xA7
+#define USB_REQ_CPIA_SET_VP_DEFAULTS 0xA8
+#define USB_REQ_CPIA_SET_APCOR 0xA9
+#define USB_REQ_CPIA_SET_FLICKER_CTRL 0xAA
+#define USB_REQ_CPIA_SET_VL_OFFSET 0xAB
+
+#define USB_REQ_CPIA_GET_COLOUR_PARAMETERS 0xB0
+#define USB_REQ_CPIA_GET_COLOUR_BALANCE 0xB1
+#define USB_REQ_CPIA_GET_EXPOSURE 0xB2
+#define USB_REQ_CPIA_SET_SENSOR_MATRIX 0xB3
+
+#define USB_REQ_CPIA_COLOUR_BARS 0xBD
+#define USB_REQ_CPIA_READ_VP_REGS 0xBE
+#define USB_REQ_CPIA_WRITE_VP_REGS 0xBF
+
+#define USB_REQ_CPIA_GRAB_FRAME 0xC1
+#define USB_REQ_CPIA_UPLOAD_FRAME 0xC2
+#define USB_REQ_CPIA_SET_GRAB_MODE 0xC3
+#define USB_REQ_CPIA_INIT_STREAM_CAP 0xC4
+#define USB_REQ_CPIA_FINI_STREAM_CAP 0xC5
+#define USB_REQ_CPIA_START_STREAM_CAP 0xC6
+#define USB_REQ_CPIA_END_STREAM_CAP 0xC7
+#define USB_REQ_CPIA_SET_FORMAT 0xC8
+#define USB_REQ_CPIA_SET_ROI 0xC9
+#define USB_REQ_CPIA_SET_COMPRESSION 0xCA
+#define USB_REQ_CPIA_SET_COMPRESSION_TARGET 0xCB
+#define USB_REQ_CPIA_SET_YUV_THRESH 0xCC
+#define USB_REQ_CPIA_SET_COMPRESSION_PARAMS 0xCD
+#define USB_REQ_CPIA_DISCARD_FRAME 0xCE
+
+#define USB_REQ_CPIA_OUTPUT_RS232 0xE1
+#define USB_REQ_CPIA_ABORT_PROCESS 0xE4
+#define USB_REQ_CPIA_SET_DRAM_PAGE 0xE5
+#define USB_REQ_CPIA_START_DRAM_UPLOAD 0xE6
+#define USB_REQ_CPIA_START_DUMMY_STREAM 0xE8
+#define USB_REQ_CPIA_ABORT_STREAM 0xE9
+#define USB_REQ_CPIA_DOWNLOAD_DRAM 0xEA
+/* #define USB_REQ_CPIA_NULL_CMD 0x?? */
+
+#define CPIA_QCIF 0
+#define CPIA_CIF 1
+
+#define CPIA_YUYV 0
+#define CPIA_UYVY 1
+
+#define STREAM_BUF_SIZE (PAGE_SIZE * 4)
+
+#define SCRATCH_BUF_SIZE (STREAM_BUF_SIZE * 2)
+
+enum {
+ STATE_SCANNING, /* Scanning for start */
+ STATE_HEADER, /* Parsing header */
+ STATE_LINES, /* Parsing lines */
+};
+
+struct usb_device;
+
+struct cpia_sbuf {
+ char *data;
+ int len;
+ void *isodesc;
+};
+
+enum {
+ FRAME_READY, /* Ready to grab into */
+ FRAME_GRABBING, /* In the process of being grabbed into */
+ FRAME_DONE, /* Finished grabbing, but not been synced yet */
+ FRAME_UNUSED, /* Unused (no MCAPTURE) */
+};
+
+struct cpia_frame {
+ char *data;
+ int width;
+ int height;
+ int state;
+};
+
+struct usb_cpia {
+ struct video_device vdev;
+
+ /* Device structure */
+ struct usb_device *dev;
+
+ int streaming;
+
+ char *fbuf; /* Videodev buffer area */
+
+ int curframe;
+ struct cpia_frame frame[2]; /* Double buffering */
+
+ int receivesbuf; /* Current receiving sbuf */
+ struct cpia_sbuf sbuf[3]; /* Triple buffering */
+
+ int state; /* Current scanning state */
+ int curline;
+
+ char scratch[SCRATCH_BUF_SIZE];
+ int scratchlen;
+
+ wait_queue_head_t wq;
+};
+
+#endif
+
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)