patch-2.2.8 linux/include/asm-arm/arch-vnc/serial.h

• Lines: 44
• Date: Wed Dec 31 16:00:00 1969
• Orig file: v2.2.7/linux/include/asm-arm/arch-vnc/serial.h
• Orig date: Tue Jul 21 00:15:32 1998

diff -u --recursive --new-file v2.2.7/linux/include/asm-arm/arch-vnc/serial.h linux/include/asm-arm/arch-vnc/serial.h
@@ -1,43 +0,0 @@
-/*
- * linux/include/asm-arm/arch-vnc/serial.h
- *
- * Copyright (c) 1996 Russell King.
- *
- * Changelog:
- *  15-10-1996	RMK	Created
- *  03-05-1998	RMK	Modified for Corel Video NC
- */
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#include <asm/irq.h>
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD (1843200 / 16)
-
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-     /* UART CLK        PORT  IRQ     FLAGS        */
-#define SERIAL_PORT_DFNS \
-	{ 0, BASE_BAUD, 0x3F8, IRQ_UART	, STD_COM_FLAGS },	/* ttyS0 */	\
-	{ 0, BASE_BAUD, 0x2F8, IRQ_UART2, STD_COM_FLAGS },	/* ttyS1 */	\
-	{ 0, BASE_BAUD, 0    , 0	, STD_COM_FLAGS },	/* ttyS2 */	\
-	{ 0, BASE_BAUD, 0    , 0	, STD_COM_FLAGS },	/* ttyS3 */	\
-	{ 0, BASE_BAUD, 0    , 0	, STD_COM_FLAGS }, 	/* ttyS4 */	\
-	{ 0, BASE_BAUD, 0    , 0	, STD_COM_FLAGS },	/* ttyS5 */	\
-	{ 0, BASE_BAUD, 0    , 0	, STD_COM_FLAGS },	/* ttyS6 */	\
-	{ 0, BASE_BAUD, 0    , 0	, STD_COM_FLAGS },	/* ttyS7 */	\
-	{ 0, BASE_BAUD, 0    , 0	, STD_COM_FLAGS },	/* ttyS8 */	\
-	{ 0, BASE_BAUD, 0    , 0	, STD_COM_FLAGS },	/* ttyS9 */	\
-	{ 0, BASE_BAUD, 0    , 0	, STD_COM_FLAGS },	/* ttyS10 */	\
-	{ 0, BASE_BAUD, 0    , 0	, STD_COM_FLAGS },	/* ttyS11 */	\
-	{ 0, BASE_BAUD, 0    , 0	, STD_COM_FLAGS },	/* ttyS12 */	\
-	{ 0, BASE_BAUD, 0    , 0	, STD_COM_FLAGS },	/* ttyS13 */
-
-#endif