patch-2.2.18 linux/drivers/usb/usb-uhci.h
Next file: linux/drivers/usb/usb.c
Previous file: linux/drivers/usb/usb-uhci.c
Back to the patch index
Back to the overall index
- Lines: 283
- Date:
Fri Sep 1 13:51:30 2000
- Orig file:
v2.2.17/drivers/usb/usb-uhci.h
- Orig date:
Thu Jan 1 01:00:00 1970
diff -u --new-file --recursive --exclude-from /usr/src/exclude v2.2.17/drivers/usb/usb-uhci.h linux/drivers/usb/usb-uhci.h
@@ -0,0 +1,282 @@
+#ifndef __LINUX_UHCI_H
+#define __LINUX_UHCI_H
+
+/*
+ $Id: usb-uhci.h,v 1.55 2000/05/13 12:50:30 acher Exp $
+ */
+#define MODNAME "usb-uhci"
+#define UHCI_LATENCY_TIMER 0
+
+static __inline__ void uhci_wait_ms(unsigned int ms)
+{
+ if(!in_interrupt())
+ {
+ current->state = TASK_UNINTERRUPTIBLE;
+ schedule_timeout(1 + ms * HZ / 1000);
+ }
+ else
+ mdelay(ms);
+}
+
+/* Command register */
+#define USBCMD 0
+#define USBCMD_RS 0x0001 /* Run/Stop */
+#define USBCMD_HCRESET 0x0002 /* Host reset */
+#define USBCMD_GRESET 0x0004 /* Global reset */
+#define USBCMD_EGSM 0x0008 /* Global Suspend Mode */
+#define USBCMD_FGR 0x0010 /* Force Global Resume */
+#define USBCMD_SWDBG 0x0020 /* SW Debug mode */
+#define USBCMD_CF 0x0040 /* Config Flag (sw only) */
+#define USBCMD_MAXP 0x0080 /* Max Packet (0 = 32, 1 = 64) */
+
+/* Status register */
+#define USBSTS 2
+#define USBSTS_USBINT 0x0001 /* Interrupt due to IOC */
+#define USBSTS_ERROR 0x0002 /* Interrupt due to error */
+#define USBSTS_RD 0x0004 /* Resume Detect */
+#define USBSTS_HSE 0x0008 /* Host System Error - basically PCI problems */
+#define USBSTS_HCPE 0x0010 /* Host Controller Process Error - the scripts were buggy */
+#define USBSTS_HCH 0x0020 /* HC Halted */
+
+/* Interrupt enable register */
+#define USBINTR 4
+#define USBINTR_TIMEOUT 0x0001 /* Timeout/CRC error enable */
+#define USBINTR_RESUME 0x0002 /* Resume interrupt enable */
+#define USBINTR_IOC 0x0004 /* Interrupt On Complete enable */
+#define USBINTR_SP 0x0008 /* Short packet interrupt enable */
+
+#define USBFRNUM 6
+#define USBFLBASEADD 8
+#define USBSOF 12
+
+/* USB port status and control registers */
+#define USBPORTSC1 16
+#define USBPORTSC2 18
+#define USBPORTSC_CCS 0x0001 /* Current Connect Status ("device present") */
+#define USBPORTSC_CSC 0x0002 /* Connect Status Change */
+#define USBPORTSC_PE 0x0004 /* Port Enable */
+#define USBPORTSC_PEC 0x0008 /* Port Enable Change */
+#define USBPORTSC_LS 0x0030 /* Line Status */
+#define USBPORTSC_RD 0x0040 /* Resume Detect */
+#define USBPORTSC_LSDA 0x0100 /* Low Speed Device Attached */
+#define USBPORTSC_PR 0x0200 /* Port Reset */
+#define USBPORTSC_SUSP 0x1000 /* Suspend */
+
+/* Legacy support register */
+#define USBLEGSUP 0xc0
+#define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
+
+#define UHCI_NULL_DATA_SIZE 0x7ff /* for UHCI controller TD */
+#define UHCI_PID 0xff /* PID MASK */
+
+#define UHCI_PTR_BITS 0x000F
+#define UHCI_PTR_TERM 0x0001
+#define UHCI_PTR_QH 0x0002
+#define UHCI_PTR_DEPTH 0x0004
+
+#define UHCI_NUMFRAMES 1024 /* in the frame list [array] */
+#define UHCI_MAX_SOF_NUMBER 2047 /* in an SOF packet */
+#define CAN_SCHEDULE_FRAMES 1000 /* how far future frames can be scheduled */
+
+/*
+ * for TD <status>:
+ */
+#define TD_CTRL_SPD (1 << 29) /* Short Packet Detect */
+#define TD_CTRL_C_ERR_MASK (3 << 27) /* Error Counter bits */
+#define TD_CTRL_LS (1 << 26) /* Low Speed Device */
+#define TD_CTRL_IOS (1 << 25) /* Isochronous Select */
+#define TD_CTRL_IOC (1 << 24) /* Interrupt on Complete */
+#define TD_CTRL_ACTIVE (1 << 23) /* TD Active */
+#define TD_CTRL_STALLED (1 << 22) /* TD Stalled */
+#define TD_CTRL_DBUFERR (1 << 21) /* Data Buffer Error */
+#define TD_CTRL_BABBLE (1 << 20) /* Babble Detected */
+#define TD_CTRL_NAK (1 << 19) /* NAK Received */
+#define TD_CTRL_CRCTIMEO (1 << 18) /* CRC/Time Out Error */
+#define TD_CTRL_BITSTUFF (1 << 17) /* Bit Stuff Error */
+#define TD_CTRL_ACTLEN_MASK 0x7ff /* actual length, encoded as n - 1 */
+
+#define TD_CTRL_ANY_ERROR (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \
+ TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF)
+
+#define uhci_status_bits(ctrl_sts) (ctrl_sts & 0xFE0000)
+#define uhci_actual_length(ctrl_sts) ((ctrl_sts + 1) & TD_CTRL_ACTLEN_MASK) /* 1-based */
+#define uhci_ptr_to_virt(x) bus_to_virt(x & ~UHCI_PTR_BITS)
+
+/*
+ * for TD <flags>:
+ */
+#define UHCI_TD_REMOVE 0x0001 /* Remove when done */
+
+/*
+ * for TD <info>: (a.k.a. Token)
+ */
+#define TD_TOKEN_TOGGLE 19
+
+#define uhci_maxlen(token) ((token) >> 21)
+#define uhci_toggle(token) (((token) >> TD_TOKEN_TOGGLE) & 1)
+#define uhci_endpoint(token) (((token) >> 15) & 0xf)
+#define uhci_devaddr(token) (((token) >> 8) & 0x7f)
+#define uhci_devep(token) (((token) >> 8) & 0x7ff)
+#define uhci_packetid(token) ((token) & 0xff)
+#define uhci_packetout(token) (uhci_packetid(token) != USB_PID_IN)
+#define uhci_packetin(token) (uhci_packetid(token) == USB_PID_IN)
+
+/* ------------------------------------------------------------------------------------
+ New TD/QH-structures
+ ------------------------------------------------------------------------------------ */
+typedef enum {
+ TD_TYPE, QH_TYPE
+} uhci_desc_type_t;
+
+typedef struct {
+ __u32 link;
+ __u32 status;
+ __u32 info;
+ __u32 buffer;
+} uhci_td_t, *puhci_td_t;
+
+typedef struct {
+ __u32 head;
+ __u32 element; /* Queue element pointer */
+} uhci_qh_t, *puhci_qh_t;
+
+typedef struct {
+ union {
+ uhci_td_t td;
+ uhci_qh_t qh;
+ } hw;
+ uhci_desc_type_t type;
+ struct list_head horizontal;
+ struct list_head vertical;
+ struct list_head desc_list;
+ int last_used;
+} uhci_desc_t, *puhci_desc_t;
+
+typedef struct {
+ struct list_head desc_list; // list pointer to all corresponding TDs/QHs associated with this request
+ unsigned long started;
+ urb_t *next_queued_urb; // next queued urb for this EP
+ urb_t *prev_queued_urb;
+ uhci_desc_t *bottom_qh;
+ uhci_desc_t *next_qh; // next helper QH
+ char use_loop;
+ char flags;
+} urb_priv_t, *purb_priv_t;
+
+struct virt_root_hub {
+ int devnum; /* Address of Root Hub endpoint */
+ void *urb;
+ void *int_addr;
+ int send;
+ int interval;
+ int numports;
+ int c_p_r[8];
+ struct timer_list rh_int_timer;
+};
+
+typedef struct uhci {
+ int irq;
+ unsigned int io_addr;
+ unsigned int io_size;
+ unsigned int maxports;
+ int running;
+
+ int apm_state;
+
+ struct uhci *next; // chain of uhci device contexts
+
+ struct list_head urb_list; // list of all pending urbs
+
+ spinlock_t urb_list_lock; // lock to keep consistency
+
+ int unlink_urb_done;
+ atomic_t avoid_bulk;
+
+ struct usb_bus *bus; // our bus
+
+ __u32 *framelist;
+ uhci_desc_t **iso_td;
+ uhci_desc_t *int_chain[8];
+ uhci_desc_t *ls_control_chain;
+ uhci_desc_t *control_chain;
+ uhci_desc_t *bulk_chain;
+ uhci_desc_t *chain_end;
+ uhci_desc_t *td1ms;
+ uhci_desc_t *td32ms;
+ struct list_head free_desc;
+ spinlock_t qh_lock;
+ spinlock_t td_lock;
+ struct virt_root_hub rh; //private data of the virtual root hub
+ int loop_usage; // URBs using bandwidth reclamation
+
+ struct list_head urb_unlinked; // list of all unlinked urbs
+ long timeout_check;
+ int timeout_urbs;
+ struct pci_dev *uhci_pci;
+} uhci_t, *puhci_t;
+
+
+#define MAKE_TD_ADDR(a) (virt_to_bus(a)&~UHCI_PTR_QH)
+#define MAKE_QH_ADDR(a) (virt_to_bus(a)|UHCI_PTR_QH)
+#define UHCI_GET_CURRENT_FRAME(uhci) (inw ((uhci)->io_addr + USBFRNUM))
+
+/* ------------------------------------------------------------------------------------
+ Virtual Root HUB
+ ------------------------------------------------------------------------------------ */
+/* destination of request */
+#define RH_INTERFACE 0x01
+#define RH_ENDPOINT 0x02
+#define RH_OTHER 0x03
+
+#define RH_CLASS 0x20
+#define RH_VENDOR 0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS 0x0080
+#define RH_CLEAR_FEATURE 0x0100
+#define RH_SET_FEATURE 0x0300
+#define RH_SET_ADDRESS 0x0500
+#define RH_GET_DESCRIPTOR 0x0680
+#define RH_SET_DESCRIPTOR 0x0700
+#define RH_GET_CONFIGURATION 0x0880
+#define RH_SET_CONFIGURATION 0x0900
+#define RH_GET_STATE 0x0280
+#define RH_GET_INTERFACE 0x0A80
+#define RH_SET_INTERFACE 0x0B00
+#define RH_SYNC_FRAME 0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP 0x2000
+
+
+/* Hub port features */
+#define RH_PORT_CONNECTION 0x00
+#define RH_PORT_ENABLE 0x01
+#define RH_PORT_SUSPEND 0x02
+#define RH_PORT_OVER_CURRENT 0x03
+#define RH_PORT_RESET 0x04
+#define RH_PORT_POWER 0x08
+#define RH_PORT_LOW_SPEED 0x09
+#define RH_C_PORT_CONNECTION 0x10
+#define RH_C_PORT_ENABLE 0x11
+#define RH_C_PORT_SUSPEND 0x12
+#define RH_C_PORT_OVER_CURRENT 0x13
+#define RH_C_PORT_RESET 0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER 0x00
+#define RH_C_HUB_OVER_CURRENT 0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP 0x00
+#define RH_ENDPOINT_STALL 0x01
+
+/* Our Vendor Specific feature */
+#define RH_REMOVE_EP 0x00
+
+
+#define RH_ACK 0x01
+#define RH_REQ_ERR -1
+#define RH_NACK 0x00
+
+#define min(a,b) (((a)<(b))?(a):(b))
+
+#endif
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)