patch-2.2.18 linux/drivers/net/skfp/h/smt.h

Next file: linux/drivers/net/skfp/h/smt_p.h
Previous file: linux/drivers/net/skfp/h/smc.h
Back to the patch index
Back to the overall index

diff -u --new-file --recursive --exclude-from /usr/src/exclude v2.2.17/drivers/net/skfp/h/smt.h linux/drivers/net/skfp/h/smt.h
@@ -0,0 +1,882 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ *	SMT 7.2 frame definitions
+ */
+
+#ifndef	_SMT_
+#define _SMT_
+
+/* #define SMT5_10 */
+#define SMT6_10
+#define SMT7_20
+
+#define	OPT_PMF		/* if parameter management is supported */
+#define	OPT_SRF		/* if status report is supported */
+
+/*
+ * SMT frame version 5.1
+ */
+
+#define SMT_VID	0x0001			/* V 5.1 .. 6.1 */
+#define SMT_VID_2 0x0002		/* V 7.2 */
+
+struct smt_sid {
+	u_char	sid_oem[2] ;			/* implementation spec. */
+	struct fddi_addr sid_node ;		/* node address */
+} ;
+
+typedef u_char	t_station_id[8] ;
+
+/*
+ * note on alignment :
+ * sizeof(struct smt_header) = 32
+ * all parameters are long aligned
+ * if struct smt_header starts at offset 0, all longs are aligned correctly
+ * (FC starts at offset 3)
+ */
+_packed struct smt_header {
+	struct fddi_addr    	smt_dest ;	/* destination address */
+	struct fddi_addr	smt_source ;	/* source address */
+	u_char			smt_class ;	/* NIF, SIF ... */
+	u_char			smt_type ;	/* req., response .. */
+	u_short			smt_version ;	/* version id */
+	u_int			smt_tid ;	/* transaction ID */
+	struct smt_sid		smt_sid ;	/* station ID */
+	u_short			smt_pad ;	/* pad with 0 */
+	u_short			smt_len ;	/* length of info field */
+} ;
+#define SWAP_SMTHEADER	"662sl8ss"
+
+#if	0
+/*
+ * MAC FC values
+ */
+#define FC_SMT_INFO	0x41		/* SMT info */
+#define FC_SMT_NSA	0x4f		/* SMT Next Station Addressing */
+#endif
+
+
+/*
+ * type codes
+ */
+#define SMT_ANNOUNCE	0x01		/* announcement */
+#define SMT_REQUEST	0x02		/* request */
+#define SMT_REPLY	0x03		/* reply */
+
+/*
+ * class codes
+ */
+#define SMT_NIF		0x01		/* neighbor information frames */
+#define SMT_SIF_CONFIG	0x02		/* station information configuration */
+#define SMT_SIF_OPER	0x03		/* station information operation */
+#define SMT_ECF		0x04		/* echo frames */
+#define SMT_RAF		0x05		/* resource allocation */
+#define SMT_RDF		0x06		/* request denied */
+#define SMT_SRF		0x07		/* status report */
+#define SMT_PMF_GET	0x08		/* parameter management get */
+#define SMT_PMF_SET	0x09		/* parameter management set */
+#define SMT_ESF		0xff		/* extended service */
+
+#define SMT_MAX_ECHO_LEN	4458	/* max length of SMT Echo */
+#if	defined(CONC) || defined(CONC_II)
+#define SMT_TEST_ECHO_LEN	50	/* test length of SMT Echo */
+#else
+#define SMT_TEST_ECHO_LEN	SMT_MAX_ECHO_LEN	/* test length */
+#endif
+
+#define SMT_MAX_INFO_LEN	(4352-20)	/* max length for SMT info */
+
+
+/*
+ * parameter types
+ */
+
+struct smt_para {
+	u_short	p_type ;		/* type */
+	u_short	p_len ;			/* length of parameter */
+} ;
+
+#define PARA_LEN	(sizeof(struct smt_para))
+
+#define SMTSETPARA(p,t)		(p)->para.p_type = (t),\
+				(p)->para.p_len = sizeof(*(p)) - PARA_LEN
+
+/*
+ * P01 : Upstream Neighbor Address, UNA
+ */
+#define SMT_P_UNA	0x0001		/* upstream neighbor address */
+#define SWAP_SMT_P_UNA	"s6"
+
+struct smt_p_una {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	una_pad ;
+	struct fddi_addr una_node ;	/* node address, zero if unknown */
+} ;
+
+/*
+ * P02 : Station Descriptor
+ */
+#define SMT_P_SDE	0x0002		/* station descriptor */
+#define SWAP_SMT_P_SDE	"1111"
+
+#define SMT_SDE_STATION		0	/* end node */
+#define SMT_SDE_CONCENTRATOR	1	/* concentrator */
+
+struct smt_p_sde {
+	struct smt_para	para ;		/* generic parameter header */
+	u_char	sde_type ;		/* station type */
+	u_char	sde_mac_count ;		/* number of MACs */
+	u_char	sde_non_master ;	/* number of A,B or S ports */
+	u_char	sde_master ;		/* number of S ports on conc. */
+} ;
+
+/*
+ * P03 : Station State
+ */
+#define SMT_P_STATE	0x0003		/* station state */
+#define SWAP_SMT_P_STATE	"scc"
+
+struct smt_p_state {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	st_pad ;
+	u_char	st_topology ;		/* topology */
+	u_char	st_dupl_addr ;		/* duplicate address detected */
+} ;
+#define SMT_ST_WRAPPED		(1<<0)	/* station wrapped */
+#define SMT_ST_UNATTACHED	(1<<1)	/* unattached concentrator */
+#define SMT_ST_TWISTED_A	(1<<2)	/* A-A connection, twisted ring */
+#define SMT_ST_TWISTED_B	(1<<3)	/* B-B connection, twisted ring */
+#define SMT_ST_ROOTED_S		(1<<4)	/* rooted station */
+#define SMT_ST_SRF		(1<<5)	/* SRF protocol supported */
+#define SMT_ST_SYNC_SERVICE	(1<<6)	/* use synchronous bandwidth */
+
+#define SMT_ST_MY_DUPA		(1<<0)	/* my station detected dupl. */
+#define SMT_ST_UNA_DUPA		(1<<1)	/* my UNA detected duplicate */
+
+/*
+ * P04 : timestamp
+ */
+#define SMT_P_TIMESTAMP	0x0004		/* time stamp */
+#define SWAP_SMT_P_TIMESTAMP	"8"
+struct smt_p_timestamp {
+	struct smt_para	para ;		/* generic parameter header */
+	u_char	ts_time[8] ;		/* time, resolution 80nS, unique */
+} ;
+
+/*
+ * P05 : station policies
+ */
+#define SMT_P_POLICY	0x0005		/* station policies */
+#define SWAP_SMT_P_POLICY	"ss"
+
+struct smt_p_policy {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	pl_config ;
+	u_short pl_connect ;		/* bit string POLICY_AA ... */
+} ;
+#define SMT_PL_HOLD		1	/* hold policy supported (Dual MAC) */
+
+/*
+ * P06 : latency equivalent
+ */
+#define SMT_P_LATENCY	0x0006		/* latency */
+#define SWAP_SMT_P_LATENCY	"ssss"
+
+/*
+ * note: latency has two phy entries by definition
+ * for a SAS, the 2nd one is null
+ */
+struct smt_p_latency {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	lt_phyout_idx1 ;	/* index */
+	u_short	lt_latency1 ;		/* latency , unit : byte clock */
+	u_short	lt_phyout_idx2 ;	/* 0 if SAS */
+	u_short	lt_latency2 ;		/* 0 if SAS */
+} ;
+
+/*
+ * P07 : MAC neighbors
+ */
+#define SMT_P_NEIGHBORS	0x0007		/* MAC neighbor description */
+#define SWAP_SMT_P_NEIGHBORS	"ss66"
+
+struct smt_p_neighbor {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	nb_mib_index ;		/* MIB index */
+	u_short	nb_mac_index ;		/* n+1 .. n+m, m = #MACs, n = #PHYs */
+	struct fddi_addr nb_una ;	/* UNA , 0 for unknown */
+	struct fddi_addr nb_dna ;	/* DNA , 0 for unknown */
+} ;
+
+/*
+ * PHY record
+ */
+#define SMT_PHY_A	0		/* A port */
+#define SMT_PHY_B	1		/* B port */
+#define SMT_PHY_S	2		/* slave port */
+#define SMT_PHY_M	3		/* master port */
+
+#define SMT_CS_DISABLED	0		/* connect state : disabled */
+#define SMT_CS_CONNECTING	1	/* connect state : connecting */
+#define SMT_CS_STANDBY	2		/* connect state : stand by */
+#define SMT_CS_ACTIVE	3		/* connect state : active */
+
+#define SMT_RM_NONE	0
+#define SMT_RM_MAC	1
+
+struct smt_phy_rec {
+	u_short	phy_mib_index ;		/* MIB index */
+	u_char	phy_type ;		/* A/B/S/M */
+	u_char	phy_connect_state ;	/* disabled/connecting/active */
+	u_char	phy_remote_type ;	/* A/B/S/M */
+	u_char	phy_remote_mac ;	/* none/remote */
+	u_short	phy_resource_idx ;	/* 1 .. n */
+} ;
+
+/*
+ * MAC record
+ */
+struct smt_mac_rec {
+	struct fddi_addr mac_addr ;		/* MAC address */
+	u_short		mac_resource_idx ;	/* n+1 .. n+m */
+} ;
+
+/*
+ * P08 : path descriptors
+ * should be really an array ; however our environment has a fixed number of
+ * PHYs and MACs
+ */
+#define SMT_P_PATH	0x0008			/* path descriptor */
+#define SWAP_SMT_P_PATH	"[6s]"
+
+struct smt_p_path {
+	struct smt_para	para ;		/* generic parameter header */
+	struct smt_phy_rec	pd_phy[2] ;	/* PHY A */
+	struct smt_mac_rec	pd_mac ;	/* MAC record */
+} ;
+
+/*
+ * P09 : MAC status
+ */
+#define SMT_P_MAC_STATUS	0x0009		/* MAC status */
+#define SWAP_SMT_P_MAC_STATUS	"sslllllllll"
+
+struct smt_p_mac_status {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short st_mib_index ;		/* MIB index */
+	u_short	st_mac_index ;		/* n+1 .. n+m */
+	u_int	st_t_req ;		/* T_Req */
+	u_int	st_t_neg ;		/* T_Neg */
+	u_int	st_t_max ;		/* T_Max */
+	u_int	st_tvx_value ;		/* TVX_Value */
+	u_int	st_t_min ;		/* T_Min */
+	u_int	st_sba ;		/* synchr. bandwidth alloc */
+	u_int	st_frame_ct ;		/* frame counter */
+	u_int	st_error_ct ;		/* error counter */
+	u_int	st_lost_ct ;		/* lost frames counter */
+} ;
+
+/*
+ * P0A : PHY link error rate monitoring
+ */
+#define SMT_P_LEM	0x000a		/* link error monitor */
+#define SWAP_SMT_P_LEM	"ssccccll"
+/*
+ * units of lem_cutoff,lem_alarm,lem_estimate : 10**-x
+ */
+struct smt_p_lem {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	lem_mib_index ;		/* MIB index */
+	u_short	lem_phy_index ;		/* 1 .. n */
+	u_char	lem_pad2 ;		/* be nice and make it even . */
+	u_char	lem_cutoff ;		/* 0x4 .. 0xf, default 0x7 */
+	u_char	lem_alarm ;		/* 0x4 .. 0xf, default 0x8 */
+	u_char	lem_estimate ;		/* 0x0 .. 0xff */
+	u_int	lem_reject_ct ;		/* 0x00000000 .. 0xffffffff */
+	u_int	lem_ct ;		/* 0x00000000 .. 0xffffffff */
+} ;
+
+/*
+ * P0B : MAC frame counters
+ */
+#define SMT_P_MAC_COUNTER 0x000b	/* MAC frame counters */
+#define SWAP_SMT_P_MAC_COUNTER	"ssll"
+
+struct smt_p_mac_counter {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	mc_mib_index ;		/* MIB index */
+	u_short	mc_index ;		/* mac index */
+	u_int	mc_receive_ct ;		/* receive counter */
+	u_int	mc_transmit_ct ;	/* transmit counter */
+} ;
+
+/*
+ * P0C : MAC frame not copied counter
+ */
+#define SMT_P_MAC_FNC	0x000c		/* MAC frame not copied counter */
+#define SWAP_SMT_P_MAC_FNC	"ssl"
+
+struct smt_p_mac_fnc {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	nc_mib_index ;		/* MIB index */
+	u_short	nc_index ;		/* mac index */
+	u_int	nc_counter ;		/* not copied counter */
+} ;
+
+
+/*
+ * P0D : MAC priority values
+ */
+#define SMT_P_PRIORITY	0x000d		/* MAC priority values */
+#define SWAP_SMT_P_PRIORITY	"ssl"
+
+struct smt_p_priority {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	pr_mib_index ;		/* MIB index */
+	u_short	pr_index ;		/* mac index */
+	u_int	pr_priority[7] ;	/* priority values */
+} ;
+
+/*
+ * P0E : PHY elasticity buffer status
+ */
+#define SMT_P_EB	0x000e		/* PHY EB status */
+#define SWAP_SMT_P_EB	"ssl"
+
+struct smt_p_eb {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	eb_mib_index ;		/* MIB index */
+	u_short	eb_index ;		/* phy index */
+	u_int	eb_error_ct ;		/* # of eb overflows */
+} ;
+
+/*
+ * P0F : manufacturer field
+ */
+#define SMT_P_MANUFACTURER	0x000f	/* manufacturer field */
+#define SWAP_SMT_P_MANUFACTURER	""
+
+struct smp_p_manufacturer {
+	struct smt_para	para ;		/* generic parameter header */
+	u_char mf_data[32] ;		/* OUI + arbitrary data */
+} ;
+
+/*
+ * P10 : user field
+ */
+#define SMT_P_USER		0x0010	/* manufacturer field */
+#define SWAP_SMT_P_USER	""
+
+struct smp_p_user {
+	struct smt_para	para ;		/* generic parameter header */
+	u_char us_data[32] ;		/* arbitrary data */
+} ;
+
+
+
+/*
+ * P11 : echo data
+ */
+#define SMT_P_ECHODATA	0x0011		/* echo data */
+#define SWAP_SMT_P_ECHODATA	""
+
+struct smt_p_echo {
+	struct smt_para	para ;		/* generic parameter header */
+	u_char	ec_data[SMT_MAX_ECHO_LEN-4] ;	/* echo data */
+} ;
+
+/*
+ * P12 : reason code
+ */
+#define SMT_P_REASON	0x0012		/* reason code */
+#define SWAP_SMT_P_REASON	"l"
+
+struct smt_p_reason {
+	struct smt_para	para ;		/* generic parameter header */
+	u_int	rdf_reason ;		/* CLASS/VERSION */
+} ;
+#define SMT_RDF_CLASS	0x00000001	/* class not supported */
+#define SMT_RDF_VERSION	0x00000002	/* version not supported */
+#define SMT_RDF_SUCCESS	0x00000003	/* success (PMF) */
+#define SMT_RDF_BADSET	0x00000004	/* bad set count (PMF) */
+#define SMT_RDF_ILLEGAL 0x00000005	/* read only (PMF) */
+#define SMT_RDF_NOPARAM	0x6		/* paramter not supported (PMF) */
+#define SMT_RDF_RANGE	0x8		/* out of range */
+#define SMT_RDF_AUTHOR	0x9		/* not autohorized */
+#define SMT_RDF_LENGTH	0x0a		/* length error */
+#define SMT_RDF_TOOLONG	0x0b		/* length error */
+#define SMT_RDF_SBA	0x0d		/* SBA denied */
+
+/*
+ * P13 : refused frame beginning
+ */
+#define SMT_P_REFUSED	0x0013		/* refused frame beginning */
+#define SWAP_SMT_P_REFUSED	"l"
+
+struct smt_p_refused {
+	struct smt_para	para ;		/* generic parameter header */
+	u_int	ref_fc ;		/* 3 bytes 0 + FC */
+	struct smt_header	ref_header ;	/* refused header */
+} ;
+
+/*
+ * P14 : supported SMT versions
+ */
+#define SMT_P_VERSION	0x0014		/* SMT supported versions */
+#define SWAP_SMT_P_VERSION	"sccss"
+
+struct smt_p_version {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	v_pad ;
+	u_char	v_n ;			/* 1 .. 0xff, #versions */
+	u_char	v_index ;		/* 1 .. 0xff, index of op. v. */
+	u_short	v_version[1] ;		/* list of min. 1 version */
+	u_short	v_pad2 ;		/* pad if necessary */
+} ;
+
+/*
+ * P15 : Resource Type
+ */
+#define	SWAP_SMT_P0015		"l"
+
+struct smt_p_0015 {
+	struct smt_para	para ;		/* generic parameter header */
+	u_int		res_type ;	/* recsource type */
+} ;
+
+#define	SYNC_BW		0x00000001L	/* Synchronous Bandwidth */
+
+/*
+ * P16 : SBA Command
+ */
+#define	SWAP_SMT_P0016		"l"
+
+struct smt_p_0016 {
+	struct smt_para	para ;		/* generic parameter header */
+	u_int		sba_cmd ;	/* command for the SBA */
+} ;
+
+#define	REQUEST_ALLOCATION	0x1	/* req allocation of sync bandwidth */
+#define	REPORT_ALLOCATION	0x2	/* rep of sync bandwidth allocation */
+#define	CHANGE_ALLOCATION	0x3	/* forces a station using sync band-*/
+					/* width to change its current allo-*/
+					/* cation */
+
+/*
+ * P17 : SBA Payload Request
+ */
+#define	SWAP_SMT_P0017		"l"
+
+struct smt_p_0017 {
+	struct smt_para	para ;		/* generic parameter header */
+	int		sba_pl_req ;	/* total sync bandwidth measured in */
+} ;					/* bytes per 125 us */
+
+/*
+ * P18 : SBA Overhead Request
+ */
+#define	SWAP_SMT_P0018		"l"
+
+struct smt_p_0018 {
+	struct smt_para	para ;		/* generic parameter header */
+	int		sba_ov_req ;	/* total sync bandwidth req for overhead*/
+} ;					/* measuered in bytes per T_Neg */
+
+/*
+ * P19 : SBA Allocation Address
+ */
+#define	SWAP_SMT_P0019		"s6"
+
+struct smt_p_0019 {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short		sba_pad ;
+	struct fddi_addr alloc_addr ;	/* Allocation Address */
+} ;
+
+/*
+ * P1A : SBA Category
+ */
+#define	SWAP_SMT_P001A		"l"
+
+struct smt_p_001a {
+	struct smt_para	para ;		/* generic parameter header */
+	u_int		category ;	/* Allocator defined classification */
+} ;
+
+/*
+ * P1B : Maximum T_Neg
+ */
+#define	SWAP_SMT_P001B		"l"
+
+struct smt_p_001b {
+	struct smt_para	para ;		/* generic parameter header */
+	u_int		max_t_neg ;	/* longest T_NEG for the sync service*/
+} ;
+
+/*
+ * P1C : Minimum SBA Segment Size
+ */
+#define	SWAP_SMT_P001C		"l"
+
+struct smt_p_001c {
+	struct smt_para	para ;		/* generic parameter header */
+	u_int		min_seg_siz ;	/* smallest number of bytes per frame*/
+} ;
+
+/*
+ * P1D : SBA Allocatable
+ */
+#define	SWAP_SMT_P001D		"l"
+
+struct smt_p_001d {
+	struct smt_para	para ;		/* generic parameter header */
+	u_int		allocatable ;	/* total sync bw availabel for alloc */
+} ;
+
+/*
+ * P20 0B : frame status capabilities
+ * NOTE: not in swap table, is used by smt.c AND PMF table
+ */
+#define SMT_P_FSC	0x200b
+/* #define SWAP_SMT_P_FSC	"ssss" */
+
+struct smt_p_fsc {
+	struct smt_para	para ;		/* generic parameter header */
+	u_short	fsc_pad0 ;
+	u_short	fsc_mac_index ;		/* mac index 1 .. ff */
+	u_short	fsc_pad1 ;
+	u_short	fsc_value ;		/* FSC_TYPE[0-2] */
+} ;
+
+#define FSC_TYPE0	0		/* "normal" node (A/C handling) */
+#define FSC_TYPE1	1		/* Special A/C indicator forwarding */
+#define FSC_TYPE2	2		/* Special A/C indicator forwarding */
+
+/*
+ * P00 21 : user defined authoriziation (see pmf.c)
+ */
+#define SMT_P_AUTHOR	0x0021
+
+/*
+ * notification parameters
+ */
+#define SWAP_SMT_P1048	"ll"
+struct smt_p_1048 {
+	u_int p1048_flag ;
+	u_int p1048_cf_state ;
+} ;
+
+/*
+ * NOTE: all 2xxx 3xxx and 4xxx must include the INDEX in the swap string,
+ *	even so the INDEX is NOT part of the struct.
+ *	INDEX is already swapped in pmf.c, format in string is '4'
+ */
+#define SWAP_SMT_P208C	"4lss66"
+struct smt_p_208c {
+	u_int			p208c_flag ;
+	u_short			p208c_pad ;
+	u_short			p208c_dupcondition ;
+	struct	fddi_addr	p208c_fddilong ;
+	struct	fddi_addr	p208c_fddiunalong ;
+} ;
+
+#define SWAP_SMT_P208D	"4lllll"
+struct smt_p_208d {
+	u_int			p208d_flag ;
+	u_int			p208d_frame_ct ;
+	u_int			p208d_error_ct ;
+	u_int			p208d_lost_ct ;
+	u_int			p208d_ratio ;
+} ;
+
+#define SWAP_SMT_P208E	"4llll"
+struct smt_p_208e {
+	u_int			p208e_flag ;
+	u_int			p208e_not_copied ;
+	u_int			p208e_copied ;
+	u_int			p208e_not_copied_ratio ;
+} ;
+
+#define SWAP_SMT_P208F	"4ll6666s6"
+
+struct smt_p_208f {
+	u_int			p208f_multiple ;
+	u_int			p208f_nacondition ;
+	struct fddi_addr	p208f_old_una ;
+	struct fddi_addr	p208f_new_una ;
+	struct fddi_addr	p208f_old_dna ;
+	struct fddi_addr	p208f_new_dna ;
+	u_short			p208f_curren_path ;
+	struct fddi_addr	p208f_smt_address ;
+} ;
+
+#define SWAP_SMT_P2090	"4lssl"
+
+struct smt_p_2090 {
+	u_int			p2090_multiple ;
+	u_short			p2090_availablepaths ;
+	u_short			p2090_currentpath ;
+	u_int			p2090_requestedpaths ;
+} ;
+
+/*
+ * NOTE:
+ * special kludge for parameters 320b,320f,3210
+ * these parameters are part of RAF frames
+ * RAF frames are parsed in SBA.C and must be swapped
+ * PMF.C has special code to avoid double swapping
+ */
+#ifdef	LITTLE_ENDIAN
+#define SBAPATHINDEX	(0x01000000L)
+#else
+#define SBAPATHINDEX	(0x01L)
+#endif
+
+#define	SWAP_SMT_P320B	"42s"
+
+struct	smt_p_320b {
+	struct smt_para para ;	/* generic parameter header */
+	u_int	mib_index ;
+	u_short path_pad ;
+	u_short	path_index ;
+} ;
+
+#define	SWAP_SMT_P320F	"4l"
+
+struct	smt_p_320f {
+	struct smt_para para ;	/* generic parameter header */
+	u_int	mib_index ;
+	u_int	mib_payload ;
+} ;
+
+#define	SWAP_SMT_P3210	"4l"
+
+struct	smt_p_3210 {
+	struct smt_para para ;	/* generic parameter header */
+	u_int	mib_index ;
+	u_int	mib_overhead ;
+} ;
+
+#define SWAP_SMT_P4050	"4l1111ll"
+
+struct smt_p_4050 {
+	u_int			p4050_flag ;
+	u_char			p4050_pad ;
+	u_char			p4050_cutoff ;
+	u_char			p4050_alarm ;
+	u_char			p4050_estimate ;
+	u_int			p4050_reject_ct ;
+	u_int			p4050_ct ;
+} ;
+
+#define SWAP_SMT_P4051	"4lssss"
+struct smt_p_4051 {
+	u_int			p4051_multiple ;
+	u_short			p4051_porttype ;
+	u_short			p4051_connectstate ;
+	u_short			p4051_pc_neighbor ;
+	u_short			p4051_pc_withhold ;
+} ;
+
+#define SWAP_SMT_P4052	"4ll"
+struct smt_p_4052 {
+	u_int			p4052_flag ;
+	u_int			p4052_eberrorcount ;
+} ;
+
+#define SWAP_SMT_P4053	"4lsslss"
+
+struct smt_p_4053 {
+	u_int			p4053_multiple ;
+	u_short			p4053_availablepaths ;
+	u_short			p4053_currentpath ;
+	u_int			p4053_requestedpaths ;
+	u_short			p4053_mytype ;
+	u_short			p4053_neighbortype ;
+} ;
+
+
+#define SMT_P_SETCOUNT	0x1035
+#define SWAP_SMT_P_SETCOUNT	"l8"
+
+struct smt_p_setcount {
+	struct smt_para	para ;		/* generic parameter header */
+	u_int		count ;
+	u_char		timestamp[8] ;
+} ;
+
+/*
+ * SMT FRAMES
+ */
+
+/*
+ * NIF : neighbor information frames
+ */
+struct smt_nif {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_una	una ;		/* UNA */
+	struct smt_p_sde	sde ;		/* station descriptor */
+	struct smt_p_state	state ;		/* station state */
+#ifdef	SMT6_10
+	struct smt_p_fsc	fsc ;		/* frame status cap. */
+#endif
+} ;
+
+/*
+ * SIF : station information frames
+ */
+struct smt_sif_config {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_timestamp	ts ;		/* time stamp */
+	struct smt_p_sde	sde ;		/* station descriptor */
+	struct smt_p_version	version ;	/* supported versions */
+	struct smt_p_state	state ;		/* station state */
+	struct smt_p_policy	policy ;	/* station policy */
+	struct smt_p_latency	latency ;	/* path latency */
+	struct smt_p_neighbor	neighbor ;	/* neighbors, we have only one*/
+#ifdef	OPT_PMF
+	struct smt_p_setcount	setcount ;	 /* Set Count mandatory */
+#endif
+	/* WARNING : path MUST BE LAST FIELD !!! (see smt.c:smt_fill_path) */
+	struct smt_p_path	path ;		/* path descriptor */
+} ;
+#define SIZEOF_SMT_SIF_CONFIG	(sizeof(struct smt_sif_config)- \
+				 sizeof(struct smt_p_path))
+
+struct smt_sif_operation {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_timestamp	ts ;		/* time stamp */
+	struct smt_p_mac_status	status ;	/* mac status */
+	struct smt_p_mac_counter mc ;		/* MAC counter */
+	struct smt_p_mac_fnc 	fnc ;		/* MAC frame not copied */
+	struct smp_p_manufacturer man ;		/* manufacturer field */
+	struct smp_p_user	user ;		/* user field */
+#ifdef	OPT_PMF
+	struct smt_p_setcount	setcount ;	 /* Set Count mandatory */
+#endif
+	/* must be last */
+	struct smt_p_lem	lem[1] ;	/* phy lem status */
+} ;
+#define SIZEOF_SMT_SIF_OPERATION	(sizeof(struct smt_sif_operation)- \
+					 sizeof(struct smt_p_lem))
+
+/*
+ * ECF : echo frame
+ */
+struct smt_ecf {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_echo	ec_echo ;	/* echo parameter */
+} ;
+#define SMT_ECF_LEN	(sizeof(struct smt_header)+sizeof(struct smt_para))
+
+/*
+ * RDF : request denied frame
+ */
+struct smt_rdf {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_reason	reason ;	/* reason code */
+	struct smt_p_version	version ;	/* supported versions */
+	struct smt_p_refused	refused ;	/* refused frame fragment */
+} ;
+
+/*
+ * SBA Request Allocation Responce Frame
+ */
+struct smt_sba_alc_res {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_0015	s_type ;	/* resource type */
+	struct smt_p_0016	cmd ;		/* SBA command */
+	struct smt_p_reason	reason ;	/* reason code */
+	struct smt_p_320b	path ;		/* path type */
+	struct smt_p_320f	payload ;	/* current SBA payload */
+	struct smt_p_3210	overhead ;	/* current SBA overhead */
+	struct smt_p_0019	a_addr ;	/* Allocation Address */
+	struct smt_p_001a	cat ;		/* Category - from the request */
+	struct smt_p_001d	alloc ;		/* SBA Allocatable */
+} ;
+
+/*
+ * SBA Request Allocation Request Frame
+ */
+struct smt_sba_alc_req {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_0015	s_type ;	/* resource type */
+	struct smt_p_0016	cmd ;		/* SBA command */
+	struct smt_p_320b	path ;		/* path type */
+	struct smt_p_0017	pl_req ;	/* requested payload */
+	struct smt_p_0018	ov_req ;	/* requested SBA overhead */
+	struct smt_p_320f	payload ;	/* current SBA payload */
+	struct smt_p_3210	overhead ;	/* current SBA overhead */
+	struct smt_p_0019	a_addr ;	/* Allocation Address */
+	struct smt_p_001a	cat ;		/* Category - from the request */
+	struct smt_p_001b	tneg ;		/* max T-NEG */
+	struct smt_p_001c	segm ;		/* minimum segment size */
+} ;
+
+/*
+ * SBA Change Allocation Request Frame
+ */
+struct smt_sba_chg {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_0015	s_type ;	/* resource type */
+	struct smt_p_0016	cmd ;		/* SBA command */
+	struct smt_p_320b	path ;		/* path type */
+	struct smt_p_320f	payload ;	/* current SBA payload */
+	struct smt_p_3210	overhead ;	/* current SBA overhead */
+	struct smt_p_001a	cat ;		/* Category - from the request */
+} ;
+
+/*
+ * SBA Report Allocation Request Frame
+ */
+struct smt_sba_rep_req {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_0015	s_type ;	/* resource type */
+	struct smt_p_0016	cmd ;		/* SBA command */
+} ;
+
+/*
+ * SBA Report Allocation Response Frame
+ */
+struct smt_sba_rep_res {
+	struct smt_header	smt ;		/* generic header */
+	struct smt_p_0015	s_type ;	/* resource type */
+	struct smt_p_0016	cmd ;		/* SBA command */
+	struct smt_p_320b	path ;		/* path type */
+	struct smt_p_320f	payload ;	/* current SBA payload */
+	struct smt_p_3210	overhead ;	/* current SBA overhead */
+} ;
+
+/*
+ * actions
+ */
+#define SMT_STATION_ACTION	1
+#define SMT_STATION_ACTION_CONNECT	0
+#define SMT_STATION_ACTION_DISCONNECT	1
+#define SMT_STATION_ACTION_PATHTEST	2
+#define SMT_STATION_ACTION_SELFTEST	3
+#define SMT_STATION_ACTION_DISABLE_A	4
+#define SMT_STATION_ACTION_DISABLE_B	5
+#define SMT_STATION_ACTION_DISABLE_M	6
+
+#define SMT_PORT_ACTION		2
+#define SMT_PORT_ACTION_MAINT	0
+#define SMT_PORT_ACTION_ENABLE	1
+#define SMT_PORT_ACTION_DISABLE	2
+#define SMT_PORT_ACTION_START	3
+#define SMT_PORT_ACTION_STOP	4
+
+#endif	/* _SMT_ */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)