patch-2.2.18 linux/drivers/block/cciss_cmd.h

Next file: linux/drivers/block/cpqarray.c
Previous file: linux/drivers/block/cciss.h
Back to the patch index
Back to the overall index

diff -u --new-file --recursive --exclude-from /usr/src/exclude v2.2.17/drivers/block/cciss_cmd.h linux/drivers/block/cciss_cmd.h
@@ -0,0 +1,254 @@
+#ifndef CCISS_CMD_H
+#define CCISS_CMD_H
+//###########################################################################
+//DEFINES
+//###########################################################################
+#define CISS_VERSION "1.00"
+
+//general boundary defintions
+#define SENSEINFOBYTES          32//note that this value may vary between host implementations
+#define MAXSGENTRIES            31
+#define MAXREPLYQS              256
+
+//Command Status value
+#define CMD_SUCCESS             0x0000
+#define CMD_TARGET_STATUS       0x0001
+#define CMD_DATA_UNDERRUN       0x0002
+#define CMD_DATA_OVERRUN        0x0003
+#define CMD_INVALID             0x0004
+#define CMD_PROTOCOL_ERR        0x0005
+#define CMD_HARDWARE_ERR        0x0006
+#define CMD_CONNECTION_LOST     0x0007
+#define CMD_ABORTED             0x0008
+#define CMD_ABORT_FAILED        0x0009
+#define CMD_UNSOLICITED_ABORT   0x000A
+#define CMD_TIMEOUT             0x000B
+#define CMD_UNABORTABLE		0x000C
+
+//transfer direction
+#define XFER_NONE               0x00
+#define XFER_WRITE              0x01
+#define XFER_READ               0x02
+#define XFER_RSVD               0x03
+
+//task attribute
+#define ATTR_UNTAGGED           0x00
+#define ATTR_SIMPLE             0x04
+#define ATTR_HEADOFQUEUE        0x05
+#define ATTR_ORDERED            0x06
+#define ATTR_ACA                0x07
+
+//cdb type
+#define TYPE_CMD				0x00
+#define TYPE_MSG				0x01
+
+//config space register offsets
+#define CFG_VENDORID            0x00
+#define CFG_DEVICEID            0x02
+#define CFG_I2OBAR              0x10
+#define CFG_MEM1BAR             0x14
+
+//i2o space register offsets
+#define I2O_IBDB_SET            0x20
+#define I2O_IBDB_CLEAR          0x70
+#define I2O_INT_STATUS          0x30
+#define I2O_INT_MASK            0x34
+#define I2O_IBPOST_Q            0x40
+#define I2O_OBPOST_Q            0x44
+
+//Configuration Table
+#define CFGTBL_ChangeReq        0x00000001l
+#define CFGTBL_AccCmds          0x00000001l
+
+#define CFGTBL_Trans_Simple     0x00000002l
+
+#define CFGTBL_BusType_Ultra2   0x00000001l
+#define CFGTBL_BusType_Ultra3   0x00000002l
+#define CFGTBL_BusType_Fibre1G  0x00000100l
+#define CFGTBL_BusType_Fibre2G  0x00000200l
+typedef struct _vals32
+{
+        __u32   lower;
+        __u32   upper;
+} vals32;
+
+typedef union _u64bit
+{
+   vals32	val32;
+   __u64	val;
+} u64bit;
+
+// Type defs used in the following structs
+#define BYTE __u8
+#define WORD __u16
+#define HWORD __u16
+#define DWORD __u32
+#define QWORD vals32 
+
+//###########################################################################
+//STRUCTURES
+//###########################################################################
+#define CISS_MAX_LUN	16	
+// SCSI-3 Cmmands 
+
+#pragma pack(1)	
+
+#define CISS_INQUIRY 0x12
+//Date returned
+typedef struct _InquiryData_struct
+{
+  BYTE data_byte[36];
+} InquiryData_struct;
+
+#define CISS_REPORT_LOG 0xc2    /* Report Logical LUNs */
+// Data returned
+typedef struct _ReportLUNdata_struct
+{
+  BYTE LUNListLength[4];
+  DWORD reserved;
+  BYTE LUN[CISS_MAX_LUN][8];
+} ReportLunData_struct;
+
+#define CCISS_READ_CAPACITY 0x25 /* Read Capacity */ 
+typedef struct _ReadCapdata_struct
+{
+  BYTE total_size[4];	// Total size in blocks
+  BYTE block_size[4];	// Size of blocks in bytes
+} ReadCapdata_struct;
+
+// 12 byte commands not implemented in firmware yet. 
+// #define CCISS_READ 	0xa8	// Read(12)
+// #define CCISS_WRITE	0xaa	// Write(12)
+ #define CCISS_READ   0x28    // Read(10)
+ #define CCISS_WRITE  0x2a    // Write(10)
+
+//Command List Structure
+typedef union _SCSI3Addr_struct {
+   struct {
+    BYTE Bus:6;
+    BYTE Mode:2;        // b00
+    BYTE Dev;
+  } PeripDev;
+   struct {
+    BYTE DevMSB:6;
+    BYTE Mode:2;        // b01
+    BYTE DevLSB;
+  } LogDev;
+   struct {
+    BYTE Targ:6;
+    BYTE Mode:2;        // b10
+    BYTE Dev:5;
+    BYTE Bus:3;
+  } LogUnit;
+} SCSI3Addr_struct;
+
+typedef struct _PhysDevAddr_struct {
+  DWORD             TargetId:24;
+  DWORD             Bus:6;
+  DWORD             Mode:2;
+  SCSI3Addr_struct  Target[2]; //2 level target device addr
+} PhysDevAddr_struct;
+  
+typedef struct _LogDevAddr_struct {
+  DWORD            VolId:30;
+  DWORD            Mode:2;
+  BYTE             reserved[4];
+} LogDevAddr_struct;
+
+typedef union _LUNAddr_struct {
+  BYTE               LunAddrBytes[8];
+  SCSI3Addr_struct   SCSI3Lun[4];
+  PhysDevAddr_struct PhysDev;
+  LogDevAddr_struct  LogDev;
+} LUNAddr_struct;
+
+typedef struct _CommandListHeader_struct {
+  BYTE              ReplyQueue;
+  BYTE              SGList;
+  HWORD             SGTotal;
+  QWORD             Tag;
+  LUNAddr_struct    LUN;
+} CommandListHeader_struct;
+typedef struct _RequestBlock_struct {
+  BYTE   CDBLen;
+  struct {
+    BYTE Type:3;
+    BYTE Attribute:3;
+    BYTE Direction:2;
+  } Type;
+  HWORD  Timeout;
+  BYTE   CDB[16];
+} RequestBlock_struct;
+typedef struct _ErrDescriptor_struct {
+  QWORD  Addr;
+  DWORD  Len;
+} ErrDescriptor_struct;
+typedef struct _SGDescriptor_struct {
+  QWORD  Addr;
+  DWORD  Len;
+  DWORD  Ext;
+} SGDescriptor_struct;
+
+typedef union _MoreErrInfo_struct{
+  struct {
+    BYTE  Reserved[3];
+    BYTE  Type;
+    DWORD ErrorInfo;
+  }Common_Info;
+  struct{
+    BYTE  Reserved[2];
+    BYTE  offense_size;//size of offending entry
+    BYTE  offense_num; //byte # of offense 0-base
+    DWORD offense_value;
+  }Invalid_Cmd;
+}MoreErrInfo_struct;
+typedef struct _ErrorInfo_struct {
+  BYTE               ScsiStatus;
+  BYTE               SenseLen;
+  HWORD              CommandStatus;
+  DWORD              ResidualCnt;
+  MoreErrInfo_struct MoreErrInfo;
+  BYTE               SenseInfo[SENSEINFOBYTES];
+} ErrorInfo_struct;
+
+/* Command types */
+#define CMD_RWREQ       0x00
+#define CMD_IOCTL_PEND  0x01
+#define CMD_IOCTL_DONE  0x02
+
+typedef struct _CommandList_struct {
+  CommandListHeader_struct Header;
+  RequestBlock_struct      Request;
+  ErrDescriptor_struct     ErrDesc;
+  SGDescriptor_struct      SG[MAXSGENTRIES];
+	/* information associated with the command */ 
+  __u32			   busaddr; /* physical addres of this record */
+  ErrorInfo_struct * 	   err_info; /* pointer to the allocated mem */ 
+  int			   cmd_type; 
+  struct _CommandList_struct *prev;
+  struct _CommandList_struct *next;
+  struct buffer_head *	   bh;
+} CommandList_struct;
+
+//Configuration Table Structure
+typedef struct _HostWrite_struct {
+  DWORD TransportRequest;
+  DWORD Reserved;
+  DWORD CoalIntDelay;
+  DWORD CoalIntCount;
+} HostWrite_struct;
+
+typedef struct _CfgTable_struct {
+  BYTE             Signature[4];
+  DWORD            SpecValence;
+  DWORD            TransportSupport;
+  DWORD            TransportActive;
+  HostWrite_struct HostWrite;
+  DWORD            CmdsOutMax;
+  DWORD            BusTypes;
+  DWORD            Reserved; 
+  BYTE             ServerName[16];
+  DWORD            HeartBeat;
+} CfgTable_struct;
+#pragma pack()	 
+#endif // CCISS_CMD_H

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)