patch-2.2.14 linux/drivers/net/sk98lin/h/skgehw.h
Next file: linux/drivers/net/sk98lin/h/skgehwt.h
Previous file: linux/drivers/net/sk98lin/h/skgedrv.h
Back to the patch index
Back to the overall index
- Lines: 1716
- Date:
Tue Jan 4 10:12:17 2000
- Orig file:
v2.2.13/linux/drivers/net/sk98lin/h/skgehw.h
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.2.13/linux/drivers/net/sk98lin/h/skgehw.h linux/drivers/net/sk98lin/h/skgehw.h
@@ -0,0 +1,1715 @@
+/******************************************************************************
+ *
+ * Name: skgehw.h
+ * Project: GEnesis, PCI Gigabit Ethernet Adapter
+ * Version: $Revision: 1.33 $
+ * Date: $Date: 1999/08/27 11:17:10 $
+ * Purpose: Defines and Macros for the Gigabit Ethernet Adapter Product
+ * Family
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998,1999 SysKonnect,
+ * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ * $Log: skgehw.h,v $
+ * Revision 1.33 1999/08/27 11:17:10 malthoff
+ * It's more savely to put bracket around marco parameters.
+ * Brackets added for PHY_READ and PHY_WRITE.
+ *
+ * Revision 1.32 1999/05/19 07:31:01 cgoos
+ * Changes for 1000Base-T.
+ * Added HWAC_LINK_LED macro.
+ *
+ * Revision 1.31 1999/03/12 13:27:40 malthoff
+ * Remove __STDC__.
+ *
+ * Revision 1.30 1999/02/09 09:28:20 malthoff
+ * Add PCI_ERRBITS.
+ *
+ * Revision 1.29 1999/01/26 08:55:48 malthoff
+ * Bugfix: The 16 bit field releations inside the descriptor are
+ * endianess dependend if the descriptor reversal feature
+ * (PCI_REV_DESC bit in PCI_OUR_REG_2) is enabled.
+ * Drivers which use this feature has to set the define
+ * SK_USE_REV_DESC.
+ *
+ * Revision 1.28 1998/12/10 11:10:22 malthoff
+ * bug fix: IS_IRQ_STAT and IS_IRQ_MST_ERR has been twisted.
+ *
+ * Revision 1.27 1998/11/13 14:19:21 malthoff
+ * Bug Fix: The bit definition of B3_PA_CTRL has completely
+ * changed from HW Spec v1.3 to v1.5.
+ *
+ * Revision 1.26 1998/11/04 08:31:48 cgoos
+ * Fixed byte ordering in XM_OUTADDR/XM_OUTHASH macros.
+ *
+ * Revision 1.25 1998/11/04 07:16:25 cgoos
+ * Changed byte ordering in XM_INADDR/XM_INHASH again.
+ *
+ * Revision 1.24 1998/11/02 11:08:43 malthoff
+ * RxCtrl and TxCtrl must be volatile.
+ *
+ * Revision 1.23 1998/10/28 13:50:45 malthoff
+ * Fix: Endian support missing in XM_IN/OUT-ADDR/HASH macros.
+ *
+ * Revision 1.22 1998/10/26 08:01:36 malthoff
+ * RX_MFF_CTRL1 is split up into RX_MFF_CTRL1,
+ * RX_MFF_STAT_TO, and RX_MFF_TIST_TO.
+ * TX_MFF_CTRL1 is split up TX_MFF_CTRL1 and TX_MFF_WAF.
+ *
+ * Revision 1.21 1998/10/20 07:43:10 malthoff
+ * Fix: XM_IN/OUT/ADDR/HASH macros:
+ * The pointer must be casted.
+ *
+ * Revision 1.20 1998/10/19 15:53:59 malthoff
+ * Remove ML proto definitions.
+ *
+ * Revision 1.19 1998/10/16 14:40:17 gklug
+ * fix: typo B0_XM_IMSK regs
+ *
+ * Revision 1.18 1998/10/16 09:46:54 malthoff
+ * Remove temp defines for ML diag prototyp.
+ * Fix register definition for B0_XM1_PHY_DATA, B0_XM1_PHY_DATA
+ * B0_XM2_PHY_DATA, B0_XM2_PHY_ADDR, B0_XA1_CSR, B0_XS1_CSR,
+ * B0_XS2_CSR, and B0_XA2_CSR.
+ *
+ * Revision 1.17 1998/10/14 06:03:14 cgoos
+ * Changed shifted constant to ULONG.
+ *
+ * Revision 1.16 1998/10/09 07:05:41 malthoff
+ * Rename ALL_PA_ENA_TO to PA_ENA_TO_ALL.
+ *
+ * Revision 1.15 1998/10/05 07:54:23 malthoff
+ * Split up RB_CTRL and it's bit definition into
+ * RB_CTRL, RB_TST1, and RB_TST2.
+ * Rename RB_RX_HTPP to RB_RX_LTPP.
+ * Add ALL_PA_ENA_TO. Modify F_WATER_MARK
+ * according to HW Spec. v1.5.
+ * Add MFF_TX_CTRL_DEF.
+ *
+ * Revision 1.14 1998/09/28 13:31:16 malthoff
+ * bug fix: B2_MAC_3 is 0x110 not 0x114
+ *
+ * Revision 1.13 1998/09/24 14:42:56 malthoff
+ * Split the RX_MFF_TST into RX_MFF_CTRL2,
+ * RX_MFF_TST1, and RX_MFF_TST2.
+ * Rename RX_MFF_CTRL to RX_MFF_CTRL1.
+ * Add BMU bit CSR_SV_IDLE.
+ * Add macros PHY_READ() and PHY_WRITE().
+ * Rename macro SK_ADDR() to SK_HW_ADDR()
+ * because of conflicts with the Address Module.
+ *
+ * Revision 1.12 1998/09/16 07:25:33 malthoff
+ * Change the parameter order in the XM_INxx and XM_OUTxx macros,
+ * to have the IoC as first parameter.
+ *
+ * Revision 1.11 1998/09/03 09:58:41 malthoff
+ * Rework the XM_xxx macros. Use {} instead of () to
+ * be compatible with SK_xxx macros which are defined
+ * with {}.
+ *
+ * Revision 1.10 1998/09/02 11:16:39 malthoff
+ * Temporary modify B2_I2C_SW to make tests with
+ * the GE/ML prototyp.
+ *
+ * Revision 1.9 1998/08/19 09:11:49 gklug
+ * fix: struct are removed from c-source (see CCC)
+ * add: typedefs for all structs
+ *
+ * Revision 1.8 1998/08/18 08:27:27 malthoff
+ * Add some temporary workarounds to test GE
+ * sources with the ML.
+ *
+ * Revision 1.7 1998/07/03 14:42:26 malthoff
+ * bug fix: Correct macro XMA().
+ * Add temporary workaround to access the PCI config space over IO
+ *
+ * Revision 1.6 1998/06/23 11:30:36 malthoff
+ * Remove ';' with ',' in macors.
+ *
+ * Revision 1.5 1998/06/22 14:20:57 malthoff
+ * Add macro SK_ADDR(Base,Addr).
+ *
+ * Revision 1.4 1998/06/19 13:35:43 malthoff
+ * change 'pGec' with 'pAC'
+ *
+ * Revision 1.3 1998/06/17 14:58:16 cvs
+ * Lost keywords reinserted.
+ *
+ * Revision 1.1 1998/06/17 14:16:36 cvs
+ * created
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKGEHW_H
+#define __INC_SKGEHW_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* defines ********************************************************************/
+
+/*
+ * Configuration Space header
+ * Since this module is used for different OS', those may be
+ * duplicate on some of them (e.g. Linux). But to keep the
+ * common source, we have to live with this...
+ */
+#define PCI_VENDOR_ID 0x00 /* 16 bit Vendor ID */
+#define PCI_DEVICE_ID 0x02 /* 16 bit Device ID */
+#define PCI_COMMAND 0x04 /* 16 bit Command */
+#define PCI_STATUS 0x06 /* 16 bit Status */
+#define PCI_REV_ID 0x08 /* 8 bit Revision ID */
+#define PCI_CLASS_CODE 0x09 /* 24 bit Class Code */
+#define PCI_CACHE_LSZ 0x0c /* 8 bit Cache Line Size */
+#define PCI_LAT_TIM 0x0d /* 8 bit Latency Timer */
+#define PCI_HEADER_T 0x0e /* 8 bit Header Type */
+#define PCI_BIST 0x0f /* 8 bit Built-in selftest */
+#define PCI_BASE_1ST 0x10 /* 32 bit 1st Base address */
+#define PCI_BASE_2ND 0x14 /* 32 bit 2nd Base address */
+ /* Byte 18..2b: reserved */
+#define PCI_SUB_VID 0x2c /* 16 bit Subsystem Vendor ID */
+#define PCI_SUB_ID 0x2e /* 16 bit Subsystem ID */
+#define PCI_BASE_ROM 0x30 /* 32 bit Expansion ROM Base Address */
+ /* Byte 34..33: reserved */
+#define PCI_CAP_PTR 0x34 /* 8 bit Capabilities Ptr */
+ /* Byte 35..3b: reserved */
+#define PCI_IRQ_LINE 0x3c /* 8 bit Interrupt Line */
+#define PCI_IRQ_PIN 0x3d /* 8 bit Interrupt Pin */
+#define PCI_MIN_GNT 0x3e /* 8 bit Min_Gnt */
+#define PCI_MAX_LAT 0x3f /* 8 bit Max_Lat */
+ /* Device Dependent Region */
+#define PCI_OUR_REG_1 0x40 /* 32 bit Our Register 1 */
+#define PCI_OUR_REG_2 0x44 /* 32 bit Our Register 2 */
+ /* Power Management Region */
+#define PCI_PM_CAP_ID 0x48 /* 8 bit Power Management Cap. ID */
+#define PCI_PM_NITEM 0x49 /* 8 bit Next Item Ptr */
+#define PCI_PM_CAP_REG 0x4a /* 16 bit Power Management Capabilities */
+#define PCI_PM_CTL_STS 0x4c /* 16 bit Power Manag. Control/Status */
+ /* Byte 0x4e: reserved */
+#define PCI_PM_DAT_REG 0x4f /* 8 bit Power Manag. Data Register */
+ /* VPD Region */
+#define PCI_VPD_CAP_ID 0x50 /* 8 bit VPD Cap. ID */
+#define PCI_VPD_NITEM 0x51 /* 8 bit Next Item Ptr */
+#define PCI_VPD_ADR_REG 0x52 /* 16 bit VPD Address Register */
+#define PCI_VPD_DAT_REG 0x54 /* 32 bit VPD Data Register */
+ /* Byte 58..ff: reserved */
+
+/*
+ * I2C Address (PCI Config)
+ *
+ * Note: The temperature and voltage sensors are relocated on a different
+ * I2C bus.
+ */
+#define I2C_ADDR_VPD 0xA0 /* I2C address for the VPD EEPROM */
+
+/*
+ * Define Bits and Values of the registers
+ */
+/* PCI_VENDOR_ID 16 bit Vendor ID */
+/* PCI_DEVICE_ID 16 bit Device ID */
+/* Values for Vendor ID and Device ID shall be patched into the code */
+/* PCI_COMMAND 16 bit Command */
+ /* Bit 15..10: reserved */
+#define PCI_FBTEN (1<<9) /* Bit 9: Fast Back-To-Back enable */
+#define PCI_SERREN (1<<8) /* Bit 8: SERR enable */
+#define PCI_ADSTEP (1<<7) /* Bit 7: Address Stepping */
+#define PCI_PERREN (1<<6) /* Bit 6: Parity Report Response enable */
+#define PCI_VGA_SNOOP (1<<5) /* Bit 5: VGA palette snoop */
+#define PCI_MWIEN (1<<4) /* Bit 4: Memory write an inv cycl ena */
+#define PCI_SCYCEN (1<<3) /* Bit 3: Special Cycle enable */
+#define PCI_BMEN (1<<2) /* Bit 2: Bus Master enable */
+#define PCI_MEMEN (1<<1) /* Bit 1: Memory Space Access enable */
+#define PCI_IOEN (1<<0) /* Bit 0: IO Space Access enable */
+
+/* PCI_STATUS 16 bit Status */
+#define PCI_PERR (1<<15) /* Bit 15: Parity Error */
+#define PCI_SERR (1<<14) /* Bit 14: Signaled SERR */
+#define PCI_RMABORT (1<<13) /* Bit 13: Received Master Abort */
+#define PCI_RTABORT (1<<12) /* Bit 12: Received Target Abort */
+ /* Bit 11: reserved */
+#define PCI_DEVSEL (3<<9) /* Bit 10..9: DEVSEL Timing */
+#define PCI_DEV_FAST (0<<9) /* fast */
+#define PCI_DEV_MEDIUM (1<<9) /* medium */
+#define PCI_DEV_SLOW (2<<9) /* slow */
+#define PCI_DATAPERR (1<<8) /* Bit 8: DATA Parity error detected */
+#define PCI_FB2BCAP (1<<7) /* Bit 7: Fast Back-to-Back Capability */
+#define PCI_UDF (1<<6) /* Bit 6: User Defined Features */
+#define PCI_66MHZCAP (1<<5) /* Bit 5: 66 MHz PCI bus clock capable */
+#define PCI_NEWCAP (1<<4) /* Bit 4: New cap. list implemented */
+ /* Bit 3..0: reserved */
+
+#define PCI_ERRBITS (PCI_PERR | PCI_SERR | PCI_RMABORT | PCI_RTABORT |\
+ PCI_DATAPERR)
+
+/* PCI_CLASS_CODE 24 bit Class Code */
+/* Byte 2: Base Class (02) */
+/* Byte 1: SubClass (00) */
+/* Byte 0: Programming Interface (00) */
+
+/* PCI_CACHE_LSZ 8 bit Cache Line Size */
+/* Possible values: 0,2,4,8,16,32,64,128 */
+
+/* PCI_HEADER_T 8 bit Header Type */
+#define PCI_HD_MF_DEV (1<<7) /* Bit 7: 0= single, 1= multi-func dev */
+#define PCI_HD_TYPE 0x7f /* Bit 6..0: Header Layout 0= normal */
+
+/* PCI_BIST 8 bit Built-in selftest */
+/* Built-in Self test not supported (optional) */
+
+/* PCI_BASE_1ST 32 bit 1st Base address */
+#define PCI_MEMSIZE 0x4000L /* use 16 kB Memory Base */
+#define PCI_MEMBASE_MSK 0xffffc000L /* Bit 31..14: Memory Base Address */
+#define PCI_MEMSIZE_MSK 0x00003ff0L /* Bit 13.. 4: Memory Size Req. */
+#define PCI_PREFEN (1L<<3) /* Bit 3: Prefetchable */
+#define PCI_MEM_TYP (3L<<2) /* Bit 2.. 1: Memory Type */
+#define PCI_MEM32BIT (0L<<1) /* Base addr anywhere in 32 Bit range */
+#define PCI_MEM1M (1L<<1) /* Base addr below 1 MegaByte */
+#define PCI_MEM64BIT (2L<<1) /* Base addr anywhere in 64 Bit range */
+#define PCI_MEMSPACE (1L<<0) /* Bit 0: Memory Space Indic. */
+
+/* PCI_BASE_2ND 32 bit 2nd Base address */
+#define PCI_IOBASE 0xffffff00L /* Bit 31..8: I/O Base address */
+#define PCI_IOSIZE 0x000000fcL /* Bit 7..2: I/O Size Requirements */
+ /* Bit 1: reserved */
+#define PCI_IOSPACE (1L<<0) /* Bit 0: I/O Space Indicator */
+
+/* PCI_BASE_ROM 32 bit Expansion ROM Base Address */
+#define PCI_ROMBASE (0xfffeL<<17) /* Bit 31..17: ROM BASE address (1st)*/
+#define PCI_ROMBASZ (0x1cL<<14) /* Bit 16..14: Treat as BASE or SIZE */
+#define PCI_ROMSIZE (0x38L<<11) /* Bit 13..11: ROM Size Requirements */
+ /* Bit 10.. 1: reserved */
+#define PCI_ROMEN (0x1L<<0) /* Bit 0: Address Decode enable */
+
+/* Device Dependent Region */
+/* PCI_OUR_REG_1 32 bit Our Register 1 */
+ /* Bit 31..26: reserved */
+#define PCI_VIO (1L<<25) /* Bit 25: PCI IO Voltage, */
+ /* 0 = 3.3V / 1 = 5V */
+#define PCI_EN_BOOT (1L<<24) /* Bit 24: Enable BOOT via ROM */
+ /* 1 = Don't boot wth ROM*/
+ /* 0 = Boot with ROM */
+#define PCI_EN_IO (1L<<23) /* Bit 23: Mapping to IO space */
+#define PCI_EN_FPROM (1L<<22) /* Bit 22: FLASH mapped to mem? */
+ /* 1 = Map Flash to Mem */
+ /* 0 = Disable addr. dec*/
+#define PCI_PAGESIZE (3L<<20) /* Bit 21..20: FLASH Page Size */
+#define PCI_PAGE_16 (0L<<20) /* 16 k pages */
+#define PCI_PAGE_32K (1L<<20) /* 32 k pages */
+#define PCI_PAGE_64K (2L<<20) /* 64 k pages */
+#define PCI_PAGE_128K (3L<<20) /* 128 k pages */
+ /* Bit 19: reserved */
+#define PCI_PAGEREG (7L<<16) /* Bit 18..16: Page Register */
+#define PCI_NOTAR (1L<<15) /* Bit 15: No turnaround cycle */
+#define PCI_FORCE_BE (1L<<14) /* Bit 14: Assert all BEs on MR */
+#define PCI_DIS_MRL (1L<<13) /* Bit 13: Disable Mem R Line */
+#define PCI_DIS_MRM (1L<<12) /* Bit 12: Disable Mem R multip */
+#define PCI_DIS_MWI (1L<<11) /* Bit 11: Disable Mem W & inv */
+#define PCI_DISC_CLS (1L<<10) /* Bit 10: Disc: cacheLsz bound */
+#define PCI_BURST_DIS (1L<<9) /* Bit 9: Burst Disable */
+#define PCI_DIS_PCI_CLK (1L<<8) /* Bit 8: Disable PCI clock driv*/
+#define PCI_SKEW_DAS (0xfL<<4) /* Bit 7..4: Skew Ctrl, DAS Ext */
+#define PCI_SKEW_BASE (0xfL<<0) /* Bit 3..0: Skew Ctrl, Base */
+
+
+/* PCI_OUR_REG_2 32 bit Our Register 2 */
+#define PCI_VPD_WR_THR (0xffL<<24) /* Bit 31..24: VPD Write Threshold */
+#define PCI_DEV_SEL (0x7fL<<17) /* Bit 23..17: EEPROM Device Select */
+#define PCI_VPD_ROM_SZ (7L<<14) /* Bit 16..14: VPD ROM Size */
+ /* Bit 13..12: reserved */
+#define PCI_PATCH_DIR (0xfL<<8) /* Bit 11.. 8: Ext Patchs dir 3..0 */
+#define PCI_PATCH_DIR_0 (1L<<8)
+#define PCI_PATCH_DIR_1 (1L<<9)
+#define PCI_PATCH_DIR_2 (1L<<10)
+#define PCI_PATCH_DIR_3 (1L<<11)
+#define PCI_EXT_PATCHS (0xfL<<4) /* Bit 7..4: Extended Patches 3..0 */
+#define PCI_EXT_PATCH_0 (1L<<4)
+#define PCI_EXT_PATCH_1 (1L<<5)
+#define PCI_EXT_PATCH_2 (1L<<6)
+#define PCI_EXT_PATCH_3 (1L<<7)
+#define PCI_EN_DUMMY_RD (1L<<3) /* Bit 3: Enable Dummy Read */
+#define PCI_REV_DESC (1L<<2) /* Bit 2: Reverse Desc. Bytes */
+ /* Bit 1: reserved */
+#define PCI_USEDATA64 (1L<<0) /* Bit 0: Use 64Bit Data bus ext*/
+
+
+/* Power Management Region */
+/* PCI_PM_CAP_REG 16 bit Power Management Capabilities */
+#define PCI_PME_SUP (0x1f<<11) /* Bit 15..11: PM Manag. Event Sup */
+#define PCI_PM_D2_SUB (1<<10) /* Bit 10: D2 Support Bit */
+#define PCI_PM_D1_SUB (1<<9) /* Bit 9: D1 Support Bit */
+ /* Bit 8..6: reserved */
+#define PCI_PM_DSI (1<<5) /* Bit 5: Device Specific Init.*/
+#define PCI_PM_APS (1<<4) /* Bit 4: Auxialiary Power Src */
+#define PCI_PME_CLOCK (1<<3) /* Bit 3: PM Event Clock */
+#define PCI_PM_VER (7<<0) /* Bit 2..0: PM PCI Spec. version */
+
+/* PCI_PM_CTL_STS 16 bit Power Manag. Control/Status */
+#define PCI_PME_STATUS (1<<15) /* Bit 15: PGA doesn't sup. PME# */
+#define PCI_PM_DAT_SCL (3<<13) /* Bit 14..13: dat reg Scaling factor*/
+#define PCI_PM_DAT_SEL (0xf<<9) /* Bit 12.. 9: PM data selector field*/
+#define PCI_PME_EN (1<<8) /* Bit 8: PGA doesn't sup. PME# */
+ /* Bit 7.. 2: reserved */
+#define PCI_PM_STATE (3<<0) /* Bit 1.. 0: Power Management State*/
+#define PCI_PM_STATE_D0 (0<<0) /* D0: Operational (default) */
+#define PCI_PM_STATE_D1 (1<<0) /* D1: not supported */
+#define PCI_PM_STATE_D2 (2<<0) /* D2: not supported */
+#define PCI_PM_STATE_D3 (3<<0) /* D3: HOT, Power Down and Reset */
+
+/* VPD Region */
+/* PCI_VPD_ADR_REG 16 bit VPD Address Register */
+#define PCI_VPD_FLAG (1L<<15) /* Bit 15: starts VPD rd/wd cycle*/
+#define PCI_VPD_ADDR (0x3fffL<<0) /* Bit 14..0: VPD address */
+
+/*
+ * Control Register File:
+ * Bank 0
+ */
+#define B0_RAP 0x0000 /* 8 bit Register Address Port */
+ /* 0x0001 - 0x0003: reserved */
+#define B0_CTST 0x0004 /* 16 bit Control/Status register */
+#define B0_LED 0x0006 /* 8 Bit LED register */
+ /* 0x0007: reserved */
+#define B0_ISRC 0x0008 /* 32 bit Interrupt Source Register */
+#define B0_IMSK 0x000c /* 32 bit Interrupt Mask Register */
+#define B0_HWE_ISRC 0x0010 /* 32 bit HW Error Interrupt Src Reg */
+#define B0_HWE_IMSK 0x0014 /* 32 bit HW Error Interrupt Mask Reg */
+#define B0_SP_ISRC 0x0018 /* 32 bit Special Interrupt Source Reg */
+ /* 0x001c: reserved */
+
+/* B0 XMAC 1 registers */
+#define B0_XM1_IMSK 0x0020 /* 16 bit r/w XMAC 1 Interrupt Mask Register*/
+ /* 0x0022 - 0x0027 reserved */
+#define B0_XM1_ISRC 0x0028 /* 16 bit ro XMAC 1 Interrupt Status Reg */
+ /* 0x002a - 0x002f reserved */
+#define B0_XM1_PHY_ADDR 0x0030 /* 16 bit r/w XMAC 1 PHY Address Register */
+ /* 0x0032 - 0x0033 reserved */
+#define B0_XM1_PHY_DATA 0x0034 /* 16 bit r/w XMAC 1 PHY Data Register */
+ /* 0x0036 - 0x003f reserved */
+
+/* B0 XMAC 2 registers */
+#define B0_XM2_IMSK 0x0040 /* 16 bit r/w XMAC 2 Interrupt Mask Register*/
+ /* 0x0042 - 0x0047 reserved */
+#define B0_XM2_ISRC 0x0048 /* 16 bit ro XMAC 2 Interrupt Status Reg */
+ /* 0x004a - 0x004f reserved */
+#define B0_XM2_PHY_ADDR 0x0050 /* 16 bit r/w XMAC 2 PHY Address Register */
+ /* 0x0052 - 0x0053 reserved */
+#define B0_XM2_PHY_DATA 0x0054 /* 16 bit r/w XMAC 2 PHY Data Register */
+ /* 0x0056 - 0x005f reserved */
+
+/* BMU Control Status Registers */
+#define B0_R1_CSR 0x0060 /* 32 bit BMU Ctrl/Stat Rx Queue 1 */
+#define B0_R2_CSR 0x0064 /* 32 bit BMU Ctrl/Stat Rx Queue 2 */
+#define B0_XS1_CSR 0x0068 /* 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */
+#define B0_XA1_CSR 0x006c /* 32 bit BMU Ctrl/Stat Async Tx Queue 1*/
+#define B0_XS2_CSR 0x0070 /* 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */
+#define B0_XA2_CSR 0x0074 /* 32 bit BMU Ctrl/Stat Async Tx Queue 2*/
+ /* x0078 - 0x007f reserved */
+
+/*
+ * Bank 1
+ * - completely empty (this is the RAP Block window)
+ * Note: if RAP = 1 this page is reserved
+ */
+
+/*
+ * Bank 2
+ */
+/* NA reg = 48 bit Network Address Register, 3x16 or 8x8 bit readable */
+
+#define B2_MAC_1 0x0100 /* NA reg MAC Address 1 */
+ /* 0x0106 - 0x0107 reserved */
+#define B2_MAC_2 0x0108 /* NA reg MAC Address 2 */
+ /* 0x010e - 0x010f reserved */
+#define B2_MAC_3 0x0110 /* NA reg MAC Address 3 */
+ /* 0x0116 - 0x0117 reserved */
+#define B2_CONN_TYP 0x0118 /* 8 bit Connector type */
+#define B2_PMD_TYP 0x0119 /* 8 bit PMD type */
+#define B2_MAC_CFG 0x011a /* 8 bit MAC Configuration */
+#define B2_CHIP_REV 0x011b /* 8 bit Queen Chip Revision Number */
+ /* Eprom registers are currently of no use */
+#define B2_E_0 0x011c /* 8 bit EPROM Byte 0 */
+#define B2_E_1 0x011d /* 8 bit EPROM Byte 1 */
+#define B2_E_2 0x011e /* 8 bit EPROM Byte 2 */
+#define B2_E_3 0x011f /* 8 bit EPROM Byte 3 */
+#define B2_FAR 0x0120 /* 32 bit Flash-Prom Addr Reg/Cnt */
+#define B2_FDP 0x0124 /* 8 bit Flash-Prom Data Port */
+ /* 0x0125 - 0x0127: reserved */
+#define B2_LD_CRTL 0x0128 /* 8 bit EPROM loader control register */
+#define B2_LD_TEST 0x0129 /* 8 bit EPROM loader test register */
+ /* 0x012a - 0x012f: reserved */
+#define B2_TI_INI 0x0130 /* 32 bit Timer init value */
+#define B2_TI_VAL 0x0134 /* 32 bit Timer value */
+#define B2_TI_CRTL 0x0138 /* 8 bit Timer control */
+#define B2_TI_TEST 0x0139 /* 8 Bit Timer Test */
+ /* 0x013a - 0x013f: reserved */
+#define B2_IRQM_INI 0x0140 /* 32 bit IRQ Moderation Timer Init Reg.*/
+#define B2_IRQM_VAL 0x0144 /* 32 bit IRQ Moderation Timer Value */
+#define B2_IRQM_CTRL 0x0148 /* 8 bit IRQ Moderation Timer Control */
+#define B2_IRQM_TEST 0x0149 /* 8 bit IRQ Moderation Timer Test */
+#define B2_IRQM_MSK 0x014c /* 32 bit IRQ Moderation Mask */
+#define B2_IRQM_HWE_MSK 0x0150 /* 32 bit IRQ Moderation HW Error Mask */
+ /* 0x0154 - 0x0157: reserved */
+#define B2_TST_CTRL1 0x0158 /* 8 bit Test Control Register 1 */
+#define B2_TST_CTRL2 0x0159 /* 8 bit Test Control Register 2 */
+ /* 0x015a - 0x015b: reserved */
+#define B2_GP_IO 0x015c /* 32 bit General Purpose IO Register */
+#define B2_I2C_CTRL 0x0160 /* 32 bit I2C HW Control Register */
+#define B2_I2C_DATA 0x0164 /* 32 bit I2C HW Data Register */
+#define B2_I2C_IRQ 0x0168 /* 32 bit I2C HW IRQ Register */
+#define B2_I2C_SW 0x016c /* 32 bit I2C SW Port Register */
+#define B2_BSC_INI 0x0170 /* 32 bit Blink Source Counter Init Val */
+#define B2_BSC_VAL 0x0174 /* 32 bit Blink Source Counter Value */
+#define B2_BSC_CTRL 0x0178 /* 8 bit Blink Source Counter Control */
+#define B2_BSC_STAT 0x0179 /* 8 bit Blink Source Counter Status */
+#define B2_BSC_TST 0x017a /* 16 bit Blink Source Counter Test Reg */
+ /* 0x017c - 0x017f: reserved */
+
+/*
+ * Bank 3
+ */
+#define B3_RAM_ADDR 0x0180 /* 32 bit RAM Address, to read or write */
+#define B3_RAM_DATA_LO 0x0184 /* 32 bit RAM Data Word (low dWord) */
+#define B3_RAM_DATA_HI 0x0188 /* 32 bit RAM Data Word (high dWord) */
+ /* 0x018c - 0x018f: reserved */
+/* RAM Interface Registers */
+/*
+ * The HW-Spec. call this registers Timeout Value 0..11. But this names are
+ * not usable in SW. Please notice these are NOT real timeouts, these are
+ * the number of qWords transfered continously.
+ */
+#define B3_RI_WTO_R1 0x0190 /* 8 bit RAM Iface WR Timeout Queue R1 (TO0) */
+#define B3_RI_WTO_XA1 0x0191 /* 8 bit RAM Iface WR Timeout Queue XA1 (TO1) */
+#define B3_RI_WTO_XS1 0x0192 /* 8 bit RAM Iface WR Timeout Queue XS1 (TO2) */
+#define B3_RI_RTO_R1 0x0193 /* 8 bit RAM Iface RD Timeout Queue R1 (TO3) */
+#define B3_RI_RTO_XA1 0x0194 /* 8 bit RAM Iface RD Timeout Queue XA1 (TO4) */
+#define B3_RI_RTO_XS1 0x0195 /* 8 bit RAM Iface RD Timeout Queue XS1 (TO5) */
+#define B3_RI_WTO_R2 0x0196 /* 8 bit RAM Iface WR Timeout Queue R2 (TO6) */
+#define B3_RI_WTO_XA2 0x0197 /* 8 bit RAM Iface WR Timeout Queue XA2 (TO7) */
+#define B3_RI_WTO_XS2 0x0198 /* 8 bit RAM Iface WR Timeout Queue XS2 (TO8) */
+#define B3_RI_RTO_R2 0x0199 /* 8 bit RAM Iface RD Timeout Queue R2 (TO9) */
+#define B3_RI_RTO_XA2 0x019a /* 8 bit RAM Iface RD Timeout Queue XA2 (TO10)*/
+#define B3_RI_RTO_XS2 0x019b /* 8 bit RAM Iface RD Timeout Queue XS2 (TO11)*/
+#define B3_RI_TO_VAL 0x019c /* 8 bit RAM Iface Current Timeout Count Val */
+ /* 0x019d - 0x019f reserved */
+#define B3_RI_CTRL 0x01a0 /* 16 bit RAM Iface Control Register */
+#define B3_RI_TEST 0x01a2 /* 8 bit RAM Iface Test Register */
+ /* 0x01a3 - 0x01af reserved */
+/* MAC Arbiter Registers */
+/* Please notice these are the number of qWord tranfered continously and */
+/* NOT real timeouts */
+#define B3_MA_TOINI_RX1 0x01b0 /* 8 bit Timeout Init Value Rx Path MAC 1 */
+#define B3_MA_TOINI_RX2 0x01b1 /* 8 bit Timeout Init Value Rx Path MAC 2 */
+#define B3_MA_TOINI_TX1 0x01b2 /* 8 bit Timeout Init Value Tx Path MAC 1 */
+#define B3_MA_TOINI_TX2 0x01b3 /* 8 bit Timeout Init Value Tx Path MAC 2 */
+#define B3_MA_TOVAL_RX1 0x01b4 /* 8 bit Timeout Value Rx Path MAC 1 */
+#define B3_MA_TOVAL_RX2 0x01b5 /* 8 bit Timeout Value Rx Path MAC 1 */
+#define B3_MA_TOVAL_TX1 0x01b6 /* 8 bit Timeout Value Tx Path MAC 2 */
+#define B3_MA_TOVAL_TX2 0x01b7 /* 8 bit Timeout Value Tx Path MAC 2 */
+#define B3_MA_TO_CTRL 0x01b8 /* 16 bit MAC Arbiter Timeout Ctrl Reg */
+#define B3_MA_TO_TEST 0x01ba /* 16 bit MAC Arbiter Timeout Test Reg */
+ /* 0x01bc - 0x01bf reserved */
+#define B3_MA_RCINI_RX1 0x01c0 /* 8 bit Recovery Init Value Rx Path MAC 1 */
+#define B3_MA_RCINI_RX2 0x01c1 /* 8 bit Recovery Init Value Rx Path MAC 2 */
+#define B3_MA_RCINI_TX1 0x01c2 /* 8 bit Recovery Init Value Tx Path MAC 1 */
+#define B3_MA_RCINI_TX2 0x01c3 /* 8 bit Recovery Init Value Tx Path MAC 2 */
+#define B3_MA_RCVAL_RX1 0x01c4 /* 8 bit Recovery Value Rx Path MAC 1 */
+#define B3_MA_RCVAL_RX2 0x01c5 /* 8 bit Recovery Value Rx Path MAC 1 */
+#define B3_MA_RCVAL_TX1 0x01c6 /* 8 bit Recovery Value Tx Path MAC 2 */
+#define B3_MA_RCVAL_TX2 0x01c7 /* 8 bit Recovery Value Tx Path MAC 2 */
+#define B3_MA_RC_CTRL 0x01c8 /* 16 bit MAC Arbiter Recovery Ctrl Reg */
+#define B3_MA_RC_TEST 0x01ca /* 16 bit MAC Arbiter Recovery Test Reg */
+ /* 0x01cc - 0x01cf reserved */
+/* Packet Arbiter Registers, This are real timeouts */
+#define B3_PA_TOINI_RX1 0x01d0 /* 16 bit Timeout Init Val Rx Path MAC 1*/
+ /* 0x01d2 - 0x01d3: reserved */
+#define B3_PA_TOINI_RX2 0x01d4 /* 16 bit Timeout Init Val Rx Path MAC 2*/
+ /* 0x01d6 - 0x01d7: reserved */
+#define B3_PA_TOINI_TX1 0x01d8 /* 16 bit Timeout Init Val Tx Path MAC 1*/
+ /* 0x01da - 0x01db: reserved */
+#define B3_PA_TOINI_TX2 0x01dc /* 16 bit Timeout Init Val Tx Path MAC 2*/
+ /* 0x01de - 0x01df: reserved */
+#define B3_PA_TOVAL_RX1 0x01e0 /* 16 bit Timeout Val Rx Path MAC 1 */
+ /* 0x01e2 - 0x01e3: reserved */
+#define B3_PA_TOVAL_RX2 0x01e4 /* 16 bit Timeout Val Rx Path MAC 2 */
+ /* 0x01e6 - 0x01e7: reserved */
+#define B3_PA_TOVAL_TX1 0x01e8 /* 16 bit Timeout Val Tx Path MAC 1 */
+ /* 0x01ea - 0x01eb: reserved */
+#define B3_PA_TOVAL_TX2 0x01ec /* 16 bit Timeout Val Tx Path MAC 2 */
+ /* 0x01ee - 0x01ef: reserved */
+#define B3_PA_CTRL 0x01f0 /* 16 bit Packet Arbiter Ctrl Register */
+#define B3_PA_TEST 0x01f2 /* 16 bit Packet Arbiter Test Register */
+ /* 0x01f4 - 0x01ff: reserved */
+
+/*
+ * Bank 4 - 5
+ */
+
+/* Transmit Arbiter Registers MAC 1 and 2, user MR_ADDR() to address */
+#define TXA_ITI_INI 0x0200 /* 32 bit Tx Arb Interval Timer Init Val*/
+#define TXA_ITI_VAL 0x0204 /* 32 bit Tx Arb Interval Timer Value */
+#define TXA_LIM_INI 0x0208 /* 32 bit Tx Arb Limit Counter Init Val */
+#define TXA_LIM_VAL 0x020c /* 32 bit Tx Arb Limit Counter Value */
+#define TXA_CTRL 0x0210 /* 8 bit Tx Arbiter Control Register */
+#define TXA_TEST 0x0211 /* 8 bit Tx Arbiter Test Register */
+#define TXA_STAT 0x0212 /* 8 bit Tx Arbiter Status Register */
+ /* 0x0213 - 0x027f: reserved */
+
+/*
+ * Bank 6
+ */
+/* External registers */
+#define B6_EXT_REG 0x0300
+
+/*
+ * Bank 7
+ */
+/* This is a copy of the Configuration register file (lower half) */
+#define B7_CFG_SPC 0x0380
+
+/*
+ * Bank 8 - 15
+ */
+/* Receive and Transmit Queue Registers, use Q_ADDR() to access */
+#define B8_Q_REGS 0x0400
+
+/* Queue Register Offsets, use Q_ADDR() to access */
+#define Q_D 0x00 /* 8*32 bit Current Descriptor */
+#define Q_DA_L 0x20 /* 32 bit Current Descriptor Address Low dWord */
+#define Q_DA_H 0x24 /* 32 bit Current Descriptor Address High dWord */
+#define Q_AC_L 0x28 /* 32 bit Current Address Counter Low dWord */
+#define Q_AC_H 0x2c /* 32 bit Current Address Counter High dWord */
+#define Q_BC 0x30 /* 32 bit Current Byte Counter */
+#define Q_CSR 0x34 /* 32 bit BMU Control/Status Register */
+#define Q_F 0x38 /* 32 bit Flag Register */
+#define Q_T1 0x3c /* 32 bit Test Register 1 */
+#define Q_T1_TR 0x3c /* 8 bit Test Register 1 Transfer SM */
+#define Q_T1_WR 0x3d /* 8 bit Test Register 1 Write Descriptor SM */
+#define Q_T1_RD 0x3e /* 8 bit Test Register 1 Read Descriptor SM */
+#define Q_T1_SV 0x3f /* 8 bit Test Register 1 Supervisor SM */
+#define Q_T2 0x40 /* 32 bit Test Register 2 */
+#define Q_T3 0x44 /* 32 bit Test Register 3 */
+ /* 0x48 - 0x7f: reserved */
+
+/*
+ * Bank 16 - 23
+ */
+/* RAM Buffer Registers */
+#define B16_RAM_REGS 0x0800
+
+/* RAM Buffer Register Offsets */
+/* use RB_ADDR(Queue,Offs) to address */
+#define RB_START 0x00 /* 32 bit RAM Buffer Start Address */
+#define RB_END 0x04 /* 32 bit RAM Buffer End Address */
+#define RB_WP 0x08 /* 32 bit RAM Buffer Write Pointer */
+#define RB_RP 0x0c /* 32 bit RAM Buffer Read Pointer */
+#define RB_RX_UTPP 0x10 /* 32 bit Rx Upper Threshold, Pause Pack*/
+#define RB_RX_LTPP 0x14 /* 32 bit Rx Lower Threshold, Pause Pack*/
+#define RB_RX_UTHP 0x18 /* 32 bit Rx Upper Threshold, High Prio */
+#define RB_RX_LTHP 0x1c /* 32 bit Rx Lower Threshold, High Prio */
+ /* 0x10 - 0x1f: reserved for Tx RAM Buffer Registers */
+#define RB_PC 0x20 /* 32 bit RAM Buffer Packet Counter */
+#define RB_LEV 0x24 /* 32 bit RAM Buffer Level Register */
+#define RB_CTRL 0x28 /* 8 bit RAM Buffer Control Register */
+#define RB_TST1 0x29 /* 8 bit RAM Buffer Test Register 1 */
+#define RB_TST2 0x2A /* 8 bit RAM Buffer Test Register 2 */
+ /* 0x2c - 0x7f: reserved */
+
+/*
+ * Bank 24 - 25
+ */
+/* Receive MAC FIFO, Receive LED, and Link Sync regs, use MR_ADDR() to address*/
+#define RX_MFF_EA 0x0c00 /* 32 bit Receive MAC FIFO End Address */
+#define RX_MFF_WP 0x0c04 /* 32 bit Receive MAC FIFO Write Pointer*/
+ /* 0x0c08 - 0x0c0b reserved */
+#define RX_MFF_RP 0x0c0c /* 32 bit Receive MAC FIFO Read Pointer */
+#define RX_MFF_PC 0x0c10 /* 32 bit Receive MAC FIFO Packet Cnt */
+#define RX_MFF_LEV 0x0c14 /* 32 bit Receive MAC FIFO Level */
+#define RX_MFF_CTRL1 0x0c18 /* 16 bit Receive MAC FIFO Control Reg 1*/
+#define RX_MFF_STAT_TO 0x0c1a /* 8 bit Receive MAC Status Timeout */
+#define RX_MFF_TIST_TO 0x0c1b /* 8 bit Receive MAC Timestamp Timeout */
+#define RX_MFF_CTRL2 0x0c1c /* 8 bit Receive MAC FIFO Control Reg 2*/
+#define RX_MFF_TST1 0x0c1d /* 8 bit Receive MAC FIFO Test Reg 1 */
+#define RX_MFF_TST2 0x0c1e /* 8 bit Receive MAC FIFO Test Reg 2 */
+ /* 0x0c1f reserved */
+#define RX_LED_INI 0x0c20 /* 32 bit Receive LED Cnt Init Value */
+#define RX_LED_VAL 0x0c24 /* 32 bit Receive LED Cnt Current Value */
+#define RX_LED_CTRL 0x0c28 /* 8 bit Receive LED Cnt Control Reg */
+#define RX_LED_TST 0x0c29 /* 8 bit Receive LED Cnt Test Register */
+ /* 0x0c2a - 0x0c2f reserved */
+#define LNK_SYNC_INI 0x0c30 /* 32 bit Link Sync Cnt Init Value */
+#define LNK_SYNC_VAL 0x0c34 /* 32 bit Link Sync Cnt Current Value */
+#define LNK_SYNC_CTRL 0x0c38 /* 8 bit Link Sync Cnt Control Register*/
+#define LNK_SYNC_TST 0x0c39 /* 8 bit Link Sync Cnt Test Register */
+ /* 0x0c3a - 0x0c3b reserved */
+#define LNK_LED_REG 0x0c3c /* 8 bit Link LED Register */
+ /* 0x0c3d - 0x0c7f reserved */
+
+/*
+ * Bank 26 - 27
+ */
+/* Transmit MAC FIFO and Transmit LED Registers, use MR_ADDR() to address */
+#define TX_MFF_EA 0x0d00 /* 32 bit Transmit MAC FIFO End Address */
+#define TX_MFF_WP 0x0d04 /* 32 bit Transmit MAC FIFO WR Pointer */
+#define TX_MFF_WSP 0x0d08 /* 32 bit Transmit MAC FIFO WR Shadow Pt*/
+#define TX_MFF_RP 0x0d0c /* 32 bit Transmit MAC FIFO RD Pointer */
+#define TX_MFF_PC 0x0d10 /* 32 bit Transmit MAC FIFO Packet Cnt */
+#define TX_MFF_LEV 0x0d14 /* 32 bit Transmit MAC FIFO Level */
+#define TX_MFF_CTRL1 0x0d18 /* 16 bit Transmit MAC FIFO Ctrl Reg 1 */
+#define TX_MFF_WAF 0x0d1a /* 8 bit Transmit MAC Wait after flush*/
+ /* 0x0c1b reserved */
+#define TX_MFF_CTRL2 0x0d1c /* 8 bit Transmit MAC FIFO Ctrl Reg 2 */
+#define TX_MFF_TST1 0x0d1d /* 8 bit Transmit MAC FIFO Test Reg 1 */
+#define TX_MFF_TST2 0x0d1e /* 8 bit Transmit MAC FIFO Test Reg 2 */
+ /* 0x0d1f reserved */
+#define TX_LED_INI 0x0d20 /* 32 bit Transmit LED Cnt Init Value */
+#define TX_LED_VAL 0x0d24 /* 32 bit Transmit LED Cnt Current Val */
+#define TX_LED_CTRL 0x0d28 /* 8 bit Transmit LED Cnt Control Reg */
+#define TX_LED_TST 0x0d29 /* 8 bit Transmit LED Cnt Test Register*/
+ /* 0x0d2a - 0x0d7f reserved */
+
+/*
+ * Bank 28
+ */
+/* Descriptor Poll Timer Registers */
+#define B28_DPT_INI 0x0e00 /* 32 bit Descriptor Poll Timer Init Val*/
+#define B28_DPT_VAL 0x0e04 /* 32 bit Descriptor Poll Timer Curr Val*/
+#define B28_DPT_CTRL 0x0e08 /* 8 bit Descriptor Poll Timer Ctrl Reg*/
+ /* 0x0e09: reserved */
+#define B28_DPT_TST 0x0e0a /* 8 bit Descriptor Poll Timer Test Reg*/
+ /* 0x0e0b - 0x0e8f: reserved */
+
+/*
+ * Bank 29 - 31
+ */
+/* 0x0e90 - 0x0fff: reserved */
+
+/*
+ * Bank 0x20 - 0x3f
+ */
+/* 0x1000 - 0x1fff: reserved */
+
+/*
+ * Bank 0x40 - 0x4f
+ */
+/* XMAC 1 registers */
+#define B40_XMAC1 0x2000
+
+/*
+ * Bank 0x50 - 0x5f
+ */
+/* 0x2800 - 0x2fff: reserved */
+
+/*
+ * Bank 0x60 - 0x6f
+ */
+/* XMAC 2 registers */
+#define B40_XMAC2 0x3000
+
+/*
+ * Bank 0x70 - 0x7f
+ */
+/* 0x3800 - 0x3fff: reserved */
+
+/*
+ * Control Register Bit Definitions:
+ */
+/* B0_RAP 8 bit Register Address Port */
+ /* Bit 7: reserved */
+#define RAP_RAP 0x3f /* Bit 6..0: 0 = block 0, .., 6f = block 6f*/
+
+/* B0_CTST 16 bit Control/Status register */
+ /* Bit 15..10: reserved */
+#define CS_BUS_CLOCK (1<<9) /* Bit 9: Bus Clock 0/1 = 33/66MHz */
+#define CS_BUS_SLOT_SZ (1<<8) /* Bit 8: Slot Size 0/1 = 32/64 bit slot*/
+#define CS_ST_SW_IRQ (1<<7) /* Bit 7: Set IRQ SW Request */
+#define CS_CL_SW_IRQ (1<<6) /* Bit 6: Clear IRQ SW Request */
+#define CS_STOP_DONE (1<<5) /* Bit 5: Stop Master is finished */
+#define CS_STOP_MAST (1<<4) /* Bit 4: Command Bit to stop the master*/
+#define CS_MRST_CLR (1<<3) /* Bit 3: Clear Master reset */
+#define CS_MRST_SET (1<<2) /* Bit 2: Set Master reset */
+#define CS_RST_CLR (1<<1) /* Bit 1: Clear Software reset */
+#define CS_RST_SET (1<<0) /* Bit 0: Set Software reset */
+
+/* B0_LED 8 Bit LED register */
+ /* Bit 7..2: reserved */
+#define LED_STAT_ON (1<<1) /* Bit 1: Status LED on */
+#define LED_STAT_OFF (1<<0) /* Bit 0: Status LED off */
+
+/* B0_ISRC 32 bit Interrupt Source Register */
+/* B0_IMSK 32 bit Interrupt Mask Register */
+/* B0_SP_ISRC 32 bit Special Interrupt Source Reg */
+/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */
+#define IS_ALL_MSK 0xbfffffffL /* All Interrupt bits */
+#define IS_HW_ERR (1UL<<31) /* Bit 31: Interrupt HW Error */
+ /* Bit 30: reserved */
+#define IS_PA_TO_RX1 (1L<<29) /* Bit 29: Packet Arb Timeout Rx1*/
+#define IS_PA_TO_RX2 (1L<<28) /* Bit 28: Packet Arb Timeout Rx2*/
+#define IS_PA_TO_TX1 (1L<<27) /* Bit 27: Packet Arb Timeout Tx1*/
+#define IS_PA_TO_TX2 (1L<<26) /* Bit 26: Packet Arb Timeout Tx2*/
+#define IS_I2C_READY (1L<<25) /* Bit 25: IRQ on end of I2C tx */
+#define IS_IRQ_SW (1L<<24) /* Bit 24: SW forced IRQ */
+#define IS_EXT_REG (1L<<23) /* Bit 23: IRQ from external reg */
+#define IS_TIMINT (1L<<22) /* Bit 22: IRQ from Timer */
+#define IS_MAC1 (1L<<21) /* Bit 21: IRQ from MAC 1 */
+#define IS_LNK_SYNC_M1 (1L<<20) /* Bit 20: Link Sync Cnt wrap M1 */
+#define IS_MAC2 (1L<<19) /* Bit 19: IRQ from MAC 2 */
+#define IS_LNK_SYNC_M2 (1L<<18) /* Bit 18: Link Sync Cnt wrap M2 */
+/* Receive Queue 1 */
+#define IS_R1_B (1L<<17) /* Bit 17: Q_R1 End of Buffer */
+#define IS_R1_F (1L<<16) /* Bit 16: Q_R1 End of Frame */
+#define IS_R1_C (1L<<15) /* Bit 15: Q_R1 Encoding Error */
+/* Receive Queue 2 */
+#define IS_R2_B (1L<<14) /* Bit 14: Q_R2 End of Buffer */
+#define IS_R2_F (1L<<13) /* Bit 13: Q_R2 End of Frame */
+#define IS_R2_C (1L<<12) /* Bit 12: Q_R2 Encoding Error */
+/* Synchronous Transmit Queue 1 */
+#define IS_XS1_B (1L<<11) /* Bit 11: Q_XS1 End of Buffer */
+#define IS_XS1_F (1L<<10) /* Bit 10: Q_XS1 End of Frame */
+#define IS_XS1_C (1L<<9) /* Bit 9: Q_XS1 Encoding Error */
+/* Asynchronous Transmit Queue 1 */
+#define IS_XA1_B (1L<<8) /* Bit 8: Q_XA1 End of Buffer */
+#define IS_XA1_F (1L<<7) /* Bit 7: Q_XA1 End of Frame */
+#define IS_XA1_C (1L<<6) /* Bit 6: Q_XA1 Encoding Error */
+/* Synchronous Transmit Queue 2 */
+#define IS_XS2_B (1L<<5) /* Bit 5: Q_XS2 End of Buffer */
+#define IS_XS2_F (1L<<4) /* Bit 4: Q_XS2 End of Frame */
+#define IS_XS2_C (1L<<3) /* Bit 3: Q_XS2 Encoding Error */
+/* Asynchronous Transmit Queue 2 */
+#define IS_XA2_B (1L<<2) /* Bit 2: Q_XA2 End of Buffer */
+#define IS_XA2_F (1L<<1) /* Bit 1: Q_XA2 End of Frame */
+#define IS_XA2_C (1L<<0) /* Bit 0: Q_XA2 Encoding Error */
+
+
+/* B0_HWE_ISRC 32 bit HW Error Interrupt Src Reg */
+/* B0_HWE_IMSK 32 bit HW Error Interrupt Mask Reg */
+/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */
+#define IS_ERR_MSK 0x00000fffL /* All Error bits */
+ /* Bit 31..12: reserved */
+#define IS_IRQ_MST_ERR (1L<<11) /* Bit 11: IRQ master error */
+ /* PERR,RMABORT,RTABORT,DATAPERR */
+#define IS_IRQ_STAT (1L<<10) /* Bit 10: IRQ status execption */
+ /* RMABORT, RTABORT, DATAPERR */
+#define IS_NO_STAT_M1 (1L<<9) /* Bit 9: No Rx Status from MAC1*/
+#define IS_NO_STAT_M2 (1L<<8) /* Bit 8: No Rx Status from MAC2*/
+#define IS_NO_TIST_M1 (1L<<7) /* Bit 7: No Timestamp from MAC1*/
+#define IS_NO_TIST_M2 (1L<<6) /* Bit 6: No Timestamp from MAC2*/
+#define IS_RAM_RD_PAR (1L<<5) /* Bit 5: RAM Read Parity Error */
+#define IS_RAM_WR_PAR (1L<<4) /* Bit 4: RAM Write Parity Error*/
+#define IS_M1_PAR_ERR (1L<<3) /* Bit 3: MAC 1 Parity Error */
+#define IS_M2_PAR_ERR (1L<<2) /* Bit 2: MAC 2 Parity Error */
+#define IS_R1_PAR_ERR (1L<<1) /* Bit 1: Queue R1 Parity Error */
+#define IS_R2_PAR_ERR (1L<<0) /* Bit 0: Queue R2 Parity Error */
+
+/* B2_CONN_TYP 8 bit Connector type */
+/* B2_PMD_TYP 8 bit PMD type */
+/* Values of connector and PMD type comply to SysKonnect internal std */
+
+/* B2_MAC_CFG 8 bit MAC Configuration */
+ /* Bit 7..2: reserved */
+#define CFG_DIS_M2_CLK (1<<1) /* Bit 1: Disable Clock for 2nd MAC */
+#define CFG_SNG_MAC (1<<0) /* Bit 0: MAC Config: 1=2 MACs / 0=1 MAC*/
+
+/* B2_CHIP_REV 8 bit Queen Chip Revision Number */
+#define FIRST_CHIP_REV 0x0a /* Initial Revision Value */
+
+/* B2_FAR 32 bit Flash-Prom Addr Reg/Cnt */
+#define FAR_ADDR 0x1ffffL /* Bit 16..0: FPROM Address mask */
+
+/* B2_LD_CRTL 8 bit EPROM loader control register */
+/* Bits are currently reserved */
+
+/* B2_LD_TEST 8 bit EPROM loader test register */
+ /* Bit 7..4: reserved */
+#define LD_T_ON (1<<3) /* Bit 3: Loader Testmode on */
+#define LD_T_OFF (1<<2) /* Bit 2: Loader Testmode off */
+#define LD_T_STEP (1<<1) /* Bit 1: Decrement FPROM addr. Counter */
+#define LD_START (1<<0) /* Bit 0: Start loading FPROM */
+
+/*
+ * Timer Section
+ */
+/* B2_TI_CRTL 8 bit Timer control */
+/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */
+ /* Bit 7..3: reserved */
+#define TIM_START (1<<2) /* Bit 2: Start Timer */
+#define TIM_STOP (1<<1) /* Bit 1: Stop Timer */
+#define TIM_CLR_IRQ (1<<0) /* Bit 0: Clear Timer IRQ, (!IRQM) */
+
+/* B2_TI_TEST 8 Bit Timer Test */
+/* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */
+/* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */
+ /* Bit 7..3: reserved */
+#define TIM_T_ON (1<<2) /* Bit 2: Test mode on */
+#define TIM_T_OFF (1<<1) /* Bit 1: Test mode off */
+#define TIM_T_STEP (1<<0) /* Bit 0: Test step */
+
+/* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */
+/* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */
+ /* Bit 31..24: reserved */
+#define DPT_MSK 0x00ffffffL /* Bit 23.. 0: Desc Poll Timer Bits */
+
+/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */
+ /* Bit 7..2: reserved */
+#define DPT_START (1<<1) /* Bit 1: Start Desciptor Poll Timer */
+#define DPT_STOP (1<<0) /* Bit 0: Stop Desciptor Poll Timer */
+
+
+/* B2_TST_CTRL1 8 bit Test Control Register 1 */
+#define TST_FRC_DPERR_MR (1<<7) /* Bit 7: force DATAPERR on MST RD */
+#define TST_FRC_DPERR_MW (1<<6) /* Bit 6: force DATAPERR on MST WR */
+#define TST_FRC_DPERR_TR (1<<5) /* Bit 5: force DATAPERR on TRG RD */
+#define TST_FRC_DPERR_TW (1<<4) /* Bit 4: force DATAPERR on TRG WR */
+#define TST_FRC_APERR_M (1<<3) /* Bit 3: force ADDRPERR on MST */
+#define TST_FRC_APERR_T (1<<2) /* Bit 2: force ADDRPERR on TRG */
+#define TST_CFG_WRITE_ON (1<<1) /* Bit 1: Enable Config Reg WR */
+#define TST_CFG_WRITE_OFF (1<<0) /* Bit 0: Disable Config Reg WR */
+
+/* B2_TST_CTRL2 8 bit Test Control Register 2 */
+ /* Bit 7..4: reserved */
+ /* force the following error on */
+ /* the next master read/write */
+#define TST_FRC_DPERR_MR64 (1<<3) /* Bit 3: DataPERR RD 64 */
+#define TST_FRC_DPERR_MW64 (1<<2) /* Bit 2: DataPERR WR 64 */
+#define TST_FRC_APERR_1M64 (1<<1) /* Bit 1: AddrPERR on 1. phase */
+#define TST_FRC_APERR_2M64 (1<<0) /* Bit 0: AddrPERR on 2. phase */
+
+/* B2_GP_IO 32 bit General Purpose IO Register */
+ /* Bit 31..26: reserved */
+#define GP_DIR_9 (1L<<25) /* Bit 25: IO_9 direct, 0=I/1=O */
+#define GP_DIR_8 (1L<<24) /* Bit 24: IO_8 direct, 0=I/1=O */
+#define GP_DIR_7 (1L<<23) /* Bit 23: IO_7 direct, 0=I/1=O */
+#define GP_DIR_6 (1L<<22) /* Bit 22: IO_6 direct, 0=I/1=O */
+#define GP_DIR_5 (1L<<21) /* Bit 21: IO_5 direct, 0=I/1=O */
+#define GP_DIR_4 (1L<<20) /* Bit 20: IO_4 direct, 0=I/1=O */
+#define GP_DIR_3 (1L<<19) /* Bit 19: IO_3 direct, 0=I/1=O */
+#define GP_DIR_2 (1L<<18) /* Bit 18: IO_2 direct, 0=I/1=O */
+#define GP_DIR_1 (1L<<17) /* Bit 17: IO_1 direct, 0=I/1=O */
+#define GP_DIR_0 (1L<<16) /* Bit 16: IO_0 direct, 0=I/1=O */
+ /* Bit 15..10: reserved */
+#define GP_IO_9 (1L<<9) /* Bit 9: IO_9 pin */
+#define GP_IO_8 (1L<<8) /* Bit 8: IO_8 pin */
+#define GP_IO_7 (1L<<7) /* Bit 7: IO_7 pin */
+#define GP_IO_6 (1L<<6) /* Bit 6: IO_6 pin */
+#define GP_IO_5 (1L<<5) /* Bit 5: IO_5 pin */
+#define GP_IO_4 (1L<<4) /* Bit 4: IO_4 pin */
+#define GP_IO_3 (1L<<3) /* Bit 3: IO_3 pin */
+#define GP_IO_2 (1L<<2) /* Bit 2: IO_2 pin */
+#define GP_IO_1 (1L<<1) /* Bit 1: IO_1 pin */
+#define GP_IO_0 (1L<<0) /* Bit 0: IO_0 pin */
+
+/* B2_I2C_CTRL 32 bit I2C HW Control Register */
+#define I2C_FLAG (1UL<<31) /* Bit 31: Start read/write if WR*/
+#define I2C_ADDR (0x7fffL<<16) /* Bit 30..16: Addr to be RD/WR */
+#define I2C_DEV_SEL (0x7fL<<9) /* Bit 15.. 9: I2C Device Select */
+ /* Bit 8.. 5: reserved */
+#define I2C_BURST_LEN (1L<<4) /* Bit 4: Burst Len, 1/4 bytes */
+#define I2C_DEV_SIZE (7L<<1) /* Bit 3.. 1: I2C Device Size */
+#define I2C_025K_DEV (0L<<1) /* 0: 256 Bytes or smal. */
+#define I2C_05K_DEV (1L<<1) /* 1: 512 Bytes */
+#define I2C_1K_DEV (2L<<1) /* 2: 1024 Bytes */
+#define I2C_2K_DEV (3L<<1) /* 3: 2048 Bytes */
+#define I2C_4K_DEV (4L<<1) /* 4: 4096 Bytes */
+#define I2C_8K_DEV (5L<<1) /* 5: 8192 Bytes */
+#define I2C_16K_DEV (6L<<1) /* 6: 16384 Bytes */
+#define I2C_32K_DEV (7L<<1) /* 7: 32768 Bytes */
+#define I2C_STOP (1L<<0) /* Bit 0: Interrupt I2C transfer*/
+
+/* B2_I2C_IRQ 32 bit I2C HW IRQ Register */
+ /* Bit 31..1 reserved */
+#define I2C_CLR_IRQ (1<<0) /* Bit 0: Clear I2C IRQ */
+
+/* B2_I2C_SW 32 bit I2C HW SW Port Register */
+ /* Bit 7..3: reserved */
+#define I2C_DATA_DIR (1<<2) /* Bit 2: direction of I2C_DATA */
+#define I2C_DATA (1<<1) /* Bit 1: I2C Data Port */
+#define I2C_CLK (1<<0) /* Bit 0: I2C Clock Port */
+
+/*
+ * I2C Address
+ */
+#define I2C_SENS_ADDR LM80_ADDR /* I2C Sensor Address, (Volt and Temp)*/
+
+
+/* B2_BSC_CTRL 8 bit Blink Source Counter Control */
+ /* Bit 7..2: reserved */
+#define BSC_START (1<<1) /* Bit 1: Start Blink Source Counter */
+#define BSC_STOP (1<<0) /* Bit 0: Stop Blink Source Counter */
+
+/* B2_BSC_STAT 8 bit Blink Source Counter Status */
+ /* Bit 7..1: reserved */
+#define BSC_SRC (1<<0) /* Bit 0: Blink Source, 0=Off / 1=On */
+
+/* B2_BSC_TST 16 bit Blink Source Counter Test Reg */
+#define BSC_T_ON (1<<2) /* Bit 2: Test mode on */
+#define BSC_T_OFF (1<<1) /* Bit 1: Test mode off */
+#define BSC_T_STEP (1<<0) /* Bit 0: Test step */
+
+
+/* B3_RAM_ADDR 32 bit RAM Address, to read or write */
+ /* Bit 31..19: reserved */
+#define RAM_ADR_RAN 0x0007ffffL /* Bit 18.. 0: RAM Address Range */
+
+/* RAM Interface Registers */
+/* B3_RI_CTRL 16 bit RAM Iface Control Register */
+ /* Bit 15..10: reserved */
+#define RI_CLR_RD_PERR (1<<9) /* Bit 9: Clear IRQ RAM Read Parity Err */
+#define RI_CLR_WR_PERR (1<<8) /* Bit 8: Clear IRQ RAM Write Parity Err*/
+ /* Bit 7..2: reserved */
+#define RI_RST_CLR (1<<1) /* Bit 1: Clear RAM Interface Reset */
+#define RI_RST_SET (1<<0) /* Bit 0: Set RAM Interface Reset */
+
+/* B3_RI_TEST 8 bit RAM Iface Test Register */
+ /* Bit 15..4: reserved */
+#define RI_T_EV (1<<3) /* Bit 3: Timeout Event occured */
+#define RI_T_ON (1<<2) /* Bit 2: Timeout Timer Test On */
+#define RI_T_OFF (1<<1) /* Bit 1: Timeout Timer Test Off */
+#define RI_T_STEP (1<<0) /* Bit 0: Timeout Timer Step */
+
+/* MAC Arbiter Registers */
+/* B3_MA_TO_CTRL 16 bit MAC Arbiter Timeout Ctrl Reg */
+ /* Bit 15..4: reserved */
+#define MA_FOE_ON (1<<3) /* Bit 3: XMAC Fast Output Enable ON */
+#define MA_FOE_OFF (1<<2) /* Bit 2: XMAC Fast Output Enable OFF */
+#define MA_RST_CLR (1<<1) /* Bit 1: Clear MAC Arbiter Reset */
+#define MA_RST_SET (1<<0) /* Bit 0: Set MAC Arbiter Reset */
+
+/* B3_MA_RC_CTRL 16 bit MAC Arbiter Recovery Ctrl Reg */
+ /* Bit 15..8: reserved */
+#define MA_ENA_REC_TX2 (1<<7) /* Bit 7: Enable Recovery Timer TX2 */
+#define MA_DIS_REC_TX2 (1<<6) /* Bit 6: Disable Recovery Timer TX2 */
+#define MA_ENA_REC_TX1 (1<<5) /* Bit 5: Enable Recovery Timer TX1 */
+#define MA_DIS_REC_TX1 (1<<4) /* Bit 4: Disable Recovery Timer TX1 */
+#define MA_ENA_REC_RX2 (1<<3) /* Bit 3: Enable Recovery Timer RX2 */
+#define MA_DIS_REC_RX2 (1<<2) /* Bit 2: Disable Recovery Timer RX2 */
+#define MA_ENA_REC_RX1 (1<<1) /* Bit 1: Enable Recovery Timer RX1 */
+#define MA_DIS_REC_RX1 (1<<0) /* Bit 0: Disable Recovery Timer RX1 */
+
+/* Packet Arbiter Registers */
+/* B3_PA_CTRL 16 bit Packet Arbiter Ctrl Register */
+ /* Bit 15..14: reserved */
+#define PA_CLR_TO_TX2 (1<<13) /* Bit 13: Clear IRQ Packet Timeout TX2 */
+#define PA_CLR_TO_TX1 (1<<12) /* Bit 12: Clear IRQ Packet Timeout TX1 */
+#define PA_CLR_TO_RX2 (1<<11) /* Bit 11: Clear IRQ Packet Timeout RX2 */
+#define PA_CLR_TO_RX1 (1<<10) /* Bit 10: Clear IRQ Packet Timeout RX1 */
+#define PA_ENA_TO_TX2 (1<<9) /* Bit 9: Enable Timeout Timer TX2 */
+#define PA_DIS_TO_TX2 (1<<8) /* Bit 8: Disable Timeout Timer TX2 */
+#define PA_ENA_TO_TX1 (1<<7) /* Bit 7: Enable Timeout Timer TX1 */
+#define PA_DIS_TO_TX1 (1<<6) /* Bit 6: Disable Timeout Timer TX1 */
+#define PA_ENA_TO_RX2 (1<<5) /* Bit 5: Enable Timeout Timer RX2 */
+#define PA_DIS_TO_RX2 (1<<4) /* Bit 4: Disable Timeout Timer RX2 */
+#define PA_ENA_TO_RX1 (1<<3) /* Bit 3: Enable Timeout Timer RX1 */
+#define PA_DIS_TO_RX1 (1<<2) /* Bit 2: Disable Timeout Timer RX1 */
+#define PA_RST_CLR (1<<1) /* Bit 1: Clear MAC Arbiter Reset */
+#define PA_RST_SET (1<<0) /* Bit 0: Set MAC Arbiter Reset */
+
+#define PA_ENA_TO_ALL (PA_ENA_TO_RX1 | PA_ENA_TO_RX2 |\
+ PA_ENA_TO_TX1 | PA_ENA_TO_TX2)
+
+/* Rx/Tx Path related Arbiter Test Registers */
+/* B3_MA_TO_TEST 16 bit MAC Arbiter Timeout Test Reg */
+/* B3_MA_RC_TEST 16 bit MAC Arbiter Recovery Test Reg */
+/* B3_PA_TEST 16 bit Packet Arbiter Test Register */
+/* Bit 15, 11, 7, and 3 are reserved in B3_PA_TEST */
+#define TX2_T_EV (1<<15) /* Bit 15: TX2 Timeout/Recv Event occured*/
+#define TX2_T_ON (1<<14) /* Bit 14: TX2 Timeout/Recv Timer Test On*/
+#define TX2_T_OFF (1<<13) /* Bit 13: TX2 Timeout/Recv Timer Tst Off*/
+#define TX2_T_STEP (1<<12) /* Bit 12: TX2 Timeout/Recv Timer Step */
+#define TX1_T_EV (1<<11) /* Bit 11: TX1 Timeout/Recv Event occured*/
+#define TX1_T_ON (1<<10) /* Bit 10: TX1 Timeout/Recv Timer Test On*/
+#define TX1_T_OFF (1<<9) /* Bit 9: TX1 Timeout/Recv Timer Tst Off*/
+#define TX1_T_STEP (1<<8) /* Bit 8: TX1 Timeout/Recv Timer Step */
+#define RX2_T_EV (1<<7) /* Bit 7: RX2 Timeout/Recv Event occured*/
+#define RX2_T_ON (1<<6) /* Bit 6: RX2 Timeout/Recv Timer Test On*/
+#define RX2_T_OFF (1<<5) /* Bit 5: RX2 Timeout/Recv Timer Tst Off*/
+#define RX2_T_STEP (1<<4) /* Bit 4: RX2 Timeout/Recv Timer Step */
+#define RX1_T_EV (1<<3) /* Bit 3: RX1 Timeout/Recv Event occured*/
+#define RX1_T_ON (1<<2) /* Bit 2: RX1 Timeout/Recv Timer Test On*/
+#define RX1_T_OFF (1<<1) /* Bit 1: RX1 Timeout/Recv Timer Tst Off*/
+#define RX1_T_STEP (1<<0) /* Bit 0: RX1 Timeout/Recv Timer Step */
+
+
+/* Transmit Arbiter Registers MAC 1 and 2, user MR_ADDR() to address */
+/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */
+/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */
+/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */
+/* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */
+ /* Bit 31..24: reserved */
+#define TXA_MAX_VAL 0x00ffffffL /* Bit 23.. 0: Max TXA Timer/Cnt Val */
+
+/* TXA_CTRL 8 bit Tx Arbiter Control Register */
+#define TXA_ENA_FSYNC (1<<7) /* Bit 7: Enable force of sync tx queue */
+#define TXA_DIS_FSYNC (1<<6) /* Bit 6: Disable force of sync tx queue*/
+#define TXA_ENA_ALLOC (1<<5) /* Bit 5: Enable alloc of free bandwidth*/
+#define TXA_DIS_ALLOC (1<<4) /* Bit 4: Disabl alloc of free bandwidth*/
+#define TXA_START_RC (1<<3) /* Bit 3: Start sync Rate Control */
+#define TXA_STOP_RC (1<<2) /* Bit 2: Stop sync Rate Control */
+#define TXA_ENA_ARB (1<<1) /* Bit 1: Enable Tx Arbiter */
+#define TXA_DIS_ARB (1<<0) /* Bit 0: Disable Tx Arbiter */
+
+/* TXA_TEST 8 bit Tx Arbiter Test Register */
+ /* Bit 7..6: reserved */
+#define TXA_INT_T_ON (1<<5) /* Bit 5: Tx Arb Interval Timer Test On */
+#define TXA_INT_T_OFF (1<<4) /* Bit 4: Tx Arb Interval Timer Test Off*/
+#define TXA_INT_T_STEP (1<<3) /* Bit 3: Tx Arb Interval Timer Step */
+#define TXA_LIM_T_ON (1<<2) /* Bit 2: Tx Arb Limit Timer Test On */
+#define TXA_LIM_T_OFF (1<<1) /* Bit 1: Tx Arb Limit Timer Test Off */
+#define TXA_LIM_T_STEP (1<<0) /* Bit 0: Tx Arb Limit Timer Step */
+
+/* TXA_STAT 8 bit Tx Arbiter Status Register */
+ /* Bit 7..1: reserved */
+#define TXA_PRIO_XS (1<<0) /* Bit 0: sync queue has prio to send */
+
+/* Q_BC 32 bit Current Byte Counter */
+ /* Bit 31..16: reserved */
+#define BC_MAX 0xffff /* Bit 15.. 0: Byte counter */
+
+/* BMU Control Status Registers */
+/* B0_R1_CSR 32 bit BMU Ctrl/Stat Rx Queue 1 */
+/* B0_R2_CSR 32 bit BMU Ctrl/Stat Rx Queue 2 */
+/* B0_XA1_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */
+/* B0_XS1_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 1 */
+/* B0_XA2_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */
+/* B0_XS2_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 2 */
+/* Q_CSR 32 bit BMU Control/Status Register */
+ /* Bit 31..25: reserved */
+#define CSR_SV_IDLE (1L<<24) /* Bit 24: BMU SM Idle */
+ /* Bit 23..22: reserved */
+#define CSR_DESC_CLR (1L<<21) /* Bit 21: Clear Reset for Descr */
+#define CSR_DESC_SET (1L<<20) /* Bit 20: Set Reset for Descr */
+#define CSR_FIFO_CLR (1L<<19) /* Bit 19: Clear Reset for FIFO */
+#define CSR_FIFO_SET (1L<<18) /* Bit 18: Set Reset for FIFO */
+#define CSR_HPI_RUN (1L<<17) /* Bit 17: Release HPI SM */
+#define CSR_HPI_RST (1L<<16) /* Bit 16: Reset HPI SM to Idle */
+#define CSR_SV_RUN (1L<<15) /* Bit 15: Release Supervisor SM */
+#define CSR_SV_RST (1L<<14) /* Bit 14: Reset Supervisor SM */
+#define CSR_DREAD_RUN (1L<<13) /* Bit 13: Release Descr Read SM */
+#define CSR_DREAD_RST (1L<<12) /* Bit 12: Reset Descr Read SM */
+#define CSR_DWRITE_RUN (1L<<11) /* Bit 11: Rel. Descr Write SM */
+#define CSR_DWRITE_RST (1L<<10) /* Bit 10: Reset Descr Write SM */
+#define CSR_TRANS_RUN (1L<<9) /* Bit 9: Release Transfer SM */
+#define CSR_TRANS_RST (1L<<8) /* Bit 8: Reset Transfer SM */
+#define CSR_ENA_POL (1L<<7) /* Bit 7: Enable Descr Polling */
+#define CSR_DIS_POL (1L<<6) /* Bit 6: Disable Descr Polling */
+#define CSR_STOP (1L<<5) /* Bit 5: Stop Rx/Tx Queue */
+#define CSR_START (1L<<4) /* Bit 4: Start Rx/Tx Queue */
+#define CSR_IRQ_CL_P (1L<<3) /* Bit 3: (Rx) Clear Parity IRQ */
+#define CSR_IRQ_CL_B (1L<<2) /* Bit 2: Clear EOB IRQ */
+#define CSR_IRQ_CL_F (1L<<1) /* Bit 1: Clear EOF IRQ */
+#define CSR_IRQ_CL_C (1L<<0) /* Bit 0: Clear ERR IRQ */
+
+#define CSR_SET_RESET (CSR_DESC_SET|CSR_FIFO_SET|CSR_HPI_RST|CSR_SV_RST|\
+ CSR_DREAD_RST|CSR_DWRITE_RST|CSR_TRANS_RST)
+#define CSR_CLR_RESET (CSR_DESC_CLR|CSR_FIFO_CLR|CSR_HPI_RUN|CSR_SV_RUN|\
+ CSR_DREAD_RUN|CSR_DWRITE_RUN|CSR_TRANS_RUN)
+
+
+/* Q_F 32 bit Flag Register */
+ /* Bit 28..31: reserved */
+#define F_ALM_FULL (1L<<27) (Rx) /* Bit 27: (Rx) FIFO almost full */
+#define F_EMPTY (1L<<27) (Tx) /* Bit 27: (Tx) FIFO empty flag */
+#define F_FIFO_EOF (1L<<26) /* Bit 26: Fag bit in FIFO */
+#define F_WM_REACHED (1L<<25) /* Bit 25: Watermark reached */
+ /* Bit 24: reserved */
+#define F_FIFO_LEVEL (0x1fL<<16) /* Bit 23..16: # of Qwords in FIFO */
+ /* Bit 15..11: reserved */
+#define F_WATER_MARK 0x0007ffL /* Bit 10.. 0: Watermark */
+
+/* Q_T1 32 bit Test Register 1 */
+/* Holds four State Machine control Bytes */
+#define SM_CRTL_SV (0xffL<<24) /* Bit 31..24: Control Supervisor SM */
+#define SM_CRTL_RD (0xffL<<16) /* Bit 23..16: Control Read Desc SM */
+#define SM_CRTL_WR (0xffL<<8) /* Bit 15.. 8: Control Write Desc SM */
+#define SM_CRTL_TR (0xffL<<0) /* Bit 7.. 0: Control Transfer SM */
+
+/* Q_T1_TR 8 bit Test Register 1 Transfer SM */
+/* Q_T1_WR 8 bit Test Register 1 Write Descriptor SM */
+/* Q_T1_RD 8 bit Test Register 1 Read Descriptor SM */
+/* Q_T1_SV 8 bit Test Register 1 Supervisor SM */
+/* The control status byte of each machine looks like ... */
+#define SM_STATE 0xf0 /* Bit 7..4: State which shall be loaded */
+#define SM_LOAD (1<<3) /* Bit 3: Load the SM with SM_STATE */
+#define SM_TEST_ON (1<<2) /* Bit 2: Switch on SM Test Mode */
+#define SM_TEST_OFF (1<<1) /* Bit 1: Go off the Test Mode */
+#define SM_STEP (1<<0) /* Bit 0: Step the State Machine */
+/* The encoding of the states is not supported by the Diagnostics Tool */
+
+/* Q_T2 32 bit Test Register 2 */
+ /* Bit 31..8: reserved */
+#define T2_AC_T_ON (1<<7) /* Bit 7: Address Counter Test Mode on */
+#define T2_AC_T_OFF (1<<6) /* Bit 6: Address Counter Test Mode off*/
+#define T2_BC_T_ON (1<<5) /* Bit 5: Byte Counter Test Mode on */
+#define T2_BC_T_OFF (1<<4) /* Bit 4: Byte Counter Test Mode off */
+#define T2_STEP04 (1<<3) /* Bit 3: Inc AC/Dec BC by 4 */
+#define T2_STEP03 (1<<2) /* Bit 2: Inc AC/Dec BC by 3 */
+#define T2_STEP02 (1<<1) /* Bit 1: Inc AC/Dec BC by 2 */
+#define T2_STEP01 (1<<0) /* Bit 0: Inc AC/Dec BC by 1 */
+
+/* Q_T3 32 bit Test Register 3 */
+ /* Bit 31..7: reserved */
+#define T3_MUX (7<<4) /* Bit 6.. 4: Mux Position */
+ /* Bit 3: reserved */
+#define T3_VRAM (7<<0) /* Bit 2.. 0: Virtual RAM Buffer Address */
+
+/* RAM Buffer Register Offsets */
+/* use RB_ADDR(Queue,Offs) to address */
+/* RB_START 32 bit RAM Buffer Start Address */
+/* RB_END 32 bit RAM Buffer End Address */
+/* RB_WP 32 bit RAM Buffer Write Pointer */
+/* RB_RP 32 bit RAM Buffer Read Pointer */
+/* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */
+/* RB_RX_LTPP 32 bit Rx Lower Threshold, Pasue Pack */
+/* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */
+/* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */
+/* RB_PC 32 bit RAM Buffer Packet Counter */
+/* RB_LEV 32 bit RAM Buffer Level Register */
+ /* Bit 31..19: reserved */
+#define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */
+
+/* RB_TST2 8 bit RAM Buffer Test Register 2 */
+ /* Bit 4..7: reserved */
+#define RB_PC_DEC (1<<3) /* Bit 3: Packet Counter Decrem */
+#define RB_PC_T_ON (1<<2) /* Bit 2: Packet Counter Test On */
+#define RB_PC_T_OFF (1<<1) /* Bit 1: Packet Counter Tst Off */
+#define RB_PC_INC (1<<0) /* Bit 0: Packet Counter Increm */
+
+/* RB_TST1 8 bit RAM Buffer Test Register 1 */
+ /* Bit 7: reserved */
+#define RB_WP_T_ON (1<<6) /* Bit 6: Write Pointer Test On */
+#define RB_WP_T_OFF (1<<5) /* Bit 5: Write Pointer Test Off */
+#define RB_WP_INC (1<<4) /* Bit 4: Write Pointer Increm */
+ /* Bit 3: reserved */
+#define RB_RP_T_ON (1<<2) /* Bit 2: Read Pointer Test On */
+#define RB_RP_T_OFF (1<<1) /* Bit 1: Read Pointer Test Off */
+#define RB_RP_DEC (1<<0) /* Bit 0: Read Pointer Decrement */
+
+/* RB_CTRL 8 bit RAM Buffer Control Register */
+ /* Bit 7..6: reserved */
+#define RB_ENA_STFWD (1<<5) /* Bit 5: Enable Store & Forward */
+#define RB_DIS_STFWD (1<<4) /* Bit 4: Disab. Store & Forward */
+#define RB_ENA_OP_MD (1<<3) /* Bit 3: Enable Operation Mode */
+#define RB_DIS_OP_MD (1<<2) /* Bit 2: Disab. Operation Mode */
+#define RB_RST_CLR (1<<1) /* Bit 1: Clr RAM Buf STM Reset */
+#define RB_RST_SET (1<<0) /* Bit 0: Set RAM Buf STM Reset */
+
+
+/* Receive and Transmit MAC FIFO Registers, use MR_ADDR() to address */
+/* RX_MFF_EA 32 bit Receive MAC FIFO End Address */
+/* RX_MFF_WP 32 bit Receive MAC FIFO Write Pointer */
+/* RX_MFF_RP 32 bit Receive MAC FIFO Read Pointer */
+/* RX_MFF_PC 32 bit Receive MAC FIFO Packet Counter*/
+/* RX_MFF_LEV 32 bit Receive MAC FIFO Level */
+/* TX_MFF_EA 32 bit Transmit MAC FIFO End Address */
+/* TX_MFF_WP 32 bit Transmit MAC FIFO Write Pointer*/
+/* TX_MFF_WSP 32 bit Transmit MAC FIFO WR Shadow Pt*/
+/* TX_MFF_RP 32 bit Transmit MAC FIFO Read Pointer */
+/* TX_MFF_PC 32 bit Transmit MAC FIFO Packet Cnt */
+/* TX_MFF_LEV 32 bit Transmit MAC FIFO Level */
+ /* Bit 31..6: reserved */
+#define MFF_MSK 0x007fL /* Bit 5..0: MAC FIFO Address/Pointer Bits */
+
+/* RX_MFF_CTRL1 16 bit Receive MAC FIFO Control Reg 1 */
+ /* Bit 15..14: reserved */
+#define MFF_ENA_RDY_PAT (1<<13) /* Bit 13: Enable Ready Patch */
+#define MFF_DIS_RDY_PAT (1<<12) /* Bit 12: Disable Ready Patch */
+#define MFF_ENA_TIM_PAT (1<<11) /* Bit 11: Enable Timing Patch */
+#define MFF_DIS_TIM_PAT (1<<10) /* Bit 10: Disable Timing Patch */
+#define MFF_ENA_ALM_FUL (1<<9) /* Bit 9: Enable AlmostFull Sign*/
+#define MFF_DIS_ALM_FUL (1<<8) /* Bit 8: Disab. AlmostFull Sign*/
+#define MFF_ENA_PAUSE (1<<7) /* Bit 7: Enable Pause Signaling*/
+#define MFF_DIS_PAUSE (1<<6) /* Bit 6: Disab. Pause Signaling*/
+#define MFF_ENA_FLUSH (1<<5) /* Bit 5: Enable Frame Flushing */
+#define MFF_DIS_FLUSH (1<<4) /* Bit 4: Disab. Frame Flushing */
+#define MFF_ENA_TIST (1<<3) /* Bit 3: Enable Timestamp Gener*/
+#define MFF_DIS_TIST (1<<2) /* Bit 2: Disab. Timestamp Gener*/
+#define MFF_CLR_INTIST (1<<1) /* Bit 1: Clear IRQ No Timestamp*/
+#define MFF_CLR_INSTAT (1<<0) /* Bit 0: Clear IRQ No Status */
+
+#define MFF_RX_CTRL_DEF MFF_ENA_TIM_PAT
+
+/* TX_MFF_CTRL1 16 bit Transmit MAC FIFO Control Reg 1 */
+#define MFF_CLR_PERR (1<<15) /* Bit 15: Clear Parity Error IRQ*/
+ /* Bit 14: reserved */
+#define MFF_ENA_PKT_REC (1<<13) /* Bit 13: Enable Packet Recovery*/
+#define MFF_DIS_PKT_REC (1<<12) /* Bit 12: Disable Packet Recov. */
+/* MFF_ENA_TIM_PAT (see RX_MFF_CTRL1)Bit 11: Enable Timing Patch */
+/* MFF_DIS_TIM_PAT (see RX_MFF_CTRL1)Bit 10: Disable Timing Patch */
+/* MFF_ENA_ALM_FUL (see RX_MFF_CTRL1)Bit 9: Enable AlmostFull Sign*/
+/* MFF_DIS_ALM_FUL (see RX_MFF_CTRL1)Bit 8: Disab. AlmostFull Sign*/
+#define MFF_ENA_W4E (1<<7) /* Bit 7: Enable Wait for Empty */
+#define MFF_DIS_W4E (1<<6) /* Bit 6: Disab. Wait for Empty */
+/* MFF_ENA_FLUSH (see RX_MFF_CTRL1)Bit 5: Enable Frame Flushing */
+/* MFF_DIS_FLUSH (see RX_MFF_CTRL1)Bit 4: Disab. Frame Flushing */
+#define MFF_ENA_LOOPB (1<<3) /* Bit 3: Enable Loopback */
+#define MFF_DIS_LOOPB (1<<2) /* Bit 2: Disable Loopback */
+#define MFF_CLR_MAC_RST (1<<1) /* Bit 1: Clear XMAC Reset */
+#define MFF_SET_MAC_RST (1<<0) /* Bit 0: Set XMAC Reset */
+
+#define MFF_TX_CTRL_DEF (MFF_ENA_PKT_REC | MFF_ENA_TIM_PAT | MFF_ENA_FLUSH)
+
+/* RX_MFF_TST2 8 bit Receive MAC FIFO Test Register 2 */
+/* TX_MFF_TST2 8 bit Transmit MAC FIFO Test Register 2 */
+ /* Bit 7: reserved */
+#define MFF_WSP_T_ON (1<<6) /* Bit 6: (Tx) Write Shadow Pt TestOn */
+#define MFF_WSP_T_OFF (1<<5) /* Bit 5: (Tx) Write Shadow Pt TstOff */
+#define MFF_WSP_INC (1<<4) /* Bit 4: (Tx) Write Shadow Pt Increm */
+#define MFF_PC_DEC (1<<3) /* Bit 3: Packet Counter Decrem */
+#define MFF_PC_T_ON (1<<2) /* Bit 2: Packet Counter Test On */
+#define MFF_PC_T_OFF (1<<1) /* Bit 1: Packet Counter Tst Off */
+#define MFF_PC_INC (1<<0) /* Bit 0: Packet Counter Increm */
+
+/* RX_MFF_TST1 8 bit Receive MAC FIFO Test Register 1 */
+/* TX_MFF_TST1 8 bit Transmit MAC FIFO Test Register 1 */
+ /* Bit 7: reserved */
+#define MFF_WP_T_ON (1<<6) /* Bit 6: Write Pointer Test On */
+#define MFF_WP_T_OFF (1<<5) /* Bit 5: Write Pointer Test Off */
+#define MFF_WP_INC (1<<4) /* Bit 4: Write Pointer Increm */
+ /* Bit 3: reserved */
+#define MFF_RP_T_ON (1<<2) /* Bit 2: Read Pointer Test On */
+#define MFF_RP_T_OFF (1<<1) /* Bit 1: Read Pointer Test Off */
+#define MFF_RP_DEC (1<<0) /* Bit 0: Read Pointer Decrement */
+
+/* RX_MFF_CTRL2 8 bit Receive MAC FIFO Control Reg 2 */
+/* TX_MFF_CTRL2 8 bit Transmit MAC FIFO Control Reg 2 */
+ /* Bit 7..4: reserved */
+#define MFF_ENA_OP_MD (1<<3) /* Bit 3: Enable Operation Mode */
+#define MFF_DIS_OP_MD (1<<2) /* Bit 2: Disab. Operation Mode */
+#define MFF_RST_CLR (1<<1) /* Bit 1: Clear MAC FIFO Reset */
+#define MFF_RST_SET (1<<0) /* Bit 0: Set MAC FIFO Reset */
+
+
+/* Receive, Transmit, and Link LED Counter Registers */
+/* RX_LED_CTRL 8 bit Receive LED Cnt Control Reg */
+/* TX_LED_CTRL 8 bit Transmit LED Cnt Control Reg */
+/* LNK_SYNC_CTRL 8 bit Link Sync Cnt Control Register */
+ /* Bit 7..3: reserved */
+#define LED_START (1<<2) /* Bit 2: Start Timer */
+#define LED_STOP (1<<1) /* Bit 1: Stop Timer */
+#define LED_STATE (1<<0) /* Bit 0:(Rx/Tx)LED State, 1=LED on */
+#define LED_CLR_IRQ (1<<0) /* Bit 0:(Lnk) Clear Link IRQ */
+
+/* RX_LED_TST 8 bit Receive LED Cnt Test Register */
+/* TX_LED_TST 8 bit Transmit LED Cnt Test Register */
+/* LNK_SYNC_TST 8 bit Link Sync Cnt Test Register */
+ /* Bit 7..3: reserved */
+#define LED_T_ON (1<<2) /* Bit 2: LED Counter Testmode On */
+#define LED_T_OFF (1<<1) /* Bit 1: LED Counter Testmode Off */
+#define LED_T_STEP (1<<0) /* Bit 0: LED Counter Step */
+
+/* LNK_LED_REG 8 bit Link LED Register */
+ /* Bit 7..6: reserved */
+#define LED_BLK_ON (1<<5) /* Bit 5: Link LED Blinking On */
+#define LED_BLK_OFF (1<<4) /* Bit 4: Link LED Blinking Off */
+#define LED_SYNC_ON (1<<3) /* Bit 3: Use Sync Wire to switch LED */
+#define LED_SYNC_OFF (1<<2) /* Bit 2: Disable Sync Wire Input */
+#define LED_ON (1<<1) /* Bit 1: switch LED on */
+#define LED_OFF (1<<0) /* Bit 0: switch LED off */
+
+
+/* Receive and Transmit Descriptors ******************************************/
+
+/* Transmit Descriptor struct */
+typedef struct s_HwTxd {
+ SK_U32 volatile TxCtrl; /* Transmit Buffer Control Field */
+ SK_U32 TxNext ; /* Physical Address Pointer to the next TxD */
+ SK_U32 TxAdrLo ; /* Physical Tx Buffer Address lower dword */
+ SK_U32 TxAdrHi ; /* Physical Tx Buffer Address upper dword */
+ SK_U32 TxStat ; /* Transmit Frame Status Word */
+#ifndef SK_USE_REV_DESC
+ SK_U16 TxTcpOffs ; /* TCP Checksum Calculation Start Value */
+ SK_U16 TxRes1 ; /* 16 bit reserved field */
+ SK_U16 TxTcpWp ; /* TCP Checksum Write Position */
+ SK_U16 TxTcpSp ; /* TCP Checksum Calculation Start Position */
+#else /* SK_USE_REV_DESC */
+ SK_U16 TxRes1 ; /* 16 bit reserved field */
+ SK_U16 TxTcpOffs ; /* TCP Checksum Calculation Start Value */
+ SK_U16 TxTcpSp ; /* TCP Checksum Calculation Start Position */
+ SK_U16 TxTcpWp ; /* TCP Checksum Write Position */
+#endif /* SK_USE_REV_DESC */
+ SK_U32 TxRes2; /* 32 bit reserved field */
+} SK_HWTXD;
+
+/* Receive Descriptor struct */
+typedef struct s_HwRxd {
+ SK_U32 volatile RxCtrl; /* Receive Buffer Control Field */
+ SK_U32 RxNext ; /* Physical Address Pointer to the next TxD */
+ SK_U32 RxAdrLo ; /* Physical Receive Buffer Address lower dword*/
+ SK_U32 RxAdrHi ; /* Physical Receive Buffer Address upper dword*/
+ SK_U32 RxStat ; /* Receive Frame Status Word */
+ SK_U32 RxTiSt ; /* Receive Timestamp provided by the XMAC */
+#ifndef SK_USE_REV_DESC
+ SK_U16 RxTcpSum1 ; /* TCP Checksum 1 */
+ SK_U16 RxTcpSum2 ; /* TCP Checksum 2 */
+ SK_U16 RxTcpSp1 ; /* TCP Checksum Calculation Start Position 1 */
+ SK_U16 RxTcpSp2 ; /* TCP Checksum Calculation Start Position 2 */
+#else /* SK_USE_REV_DESC */
+ SK_U16 RxTcpSum2 ; /* TCP Checksum 2 */
+ SK_U16 RxTcpSum1 ; /* TCP Checksum 1 */
+ SK_U16 RxTcpSp2 ; /* TCP Checksum Calculation Start Position 2 */
+ SK_U16 RxTcpSp1 ; /* TCP Checksum Calculation Start Position 1 */
+#endif /* SK_USE_REV_DESC */
+} SK_HWRXD;
+
+/*
+ * Drivers which use the reverse descriptor feature (PCI_OUR_REG_2)
+ * should set the define SK_USE_REV_DESC.
+ * Structures are 'normaly' not endianess dependent. But in
+ * this case the SK_U16 fields are bound to bit positions inside the
+ * descriptor. RxTcpSum1 e.g. must start at bit 0 within the 6.th DWord.
+ * The bit positions inside a DWord are of course endianess dependent and
+ * swaps if the DWord is swaped by the hardware.
+ */
+
+
+/* Descriptor Bit Definition */
+/* TxCtrl Transmit Buffer Control Field */
+/* RxCtrl Receive Buffer Control Field */
+#define BMU_OWN (1UL<<31) /* Bit 31: OWN bit: 0=host/1=BMU */
+#define BMU_STF (1L<<30) /* Bit 30: Start of Frame ? */
+#define BMU_EOF (1L<<29) /* Bit 29: End of Frame ? */
+#define BMU_IRQ_EOB (1L<<28) /* Bit 28: Req "End of Buff" IRQ */
+#define BMU_IRQ_EOF (1L<<27) /* Bit 27: Req "End of Frame" IRQ*/
+/* TxCtrl specific bits */
+#define BMU_STFWD (1L<<26) /* Bit 26: (Tx) Store&Forward Frame */
+#define BMU_NO_FCS (1L<<25) /* Bit 25: (Tx) disable XMAC FCS gener*/
+#define BMU_SW (1L<<24) /* Bit 24: (Tx) 1 bit res. for SW use */
+/* RxCtrl specific bits */
+#define BMU_DEV_0 (1L<<26) /* Bit 26: (Rx) transfer data to Dev0 */
+#define BMU_STAT_VAL (1L<<25) /* Bit 25: (Rx) RxStat Valid */
+#define BMU_TIST_VAL (1L<<24) /* Bit 24: (Rx) RxTiSt Valid */
+ /* Bit 23..16: BMU Check Opcodes */
+#define BMU_CHECK 0x00550000L /* Default BMU check */
+#define BMU_TCP_CHECK 0x00560000L /* Descr with TCP ext */
+#define BMU_BBC 0x0000FFFFL /* Bit 15..0: Buffer Byte Counter */
+
+/* TxStat Transmit Frame Status Word */
+/* RxStat Receive Frame Status Word */
+/*
+ *Note: TxStat is reserved for ASIC loopback mode only
+ *
+ * The Bits of the Status words are defined in xmac_ii.h
+ * (see XMR_FS bits)
+ */
+
+/* other defines *************************************************************/
+
+/*
+ * FlashProm specification
+ */
+#define MAX_PAGES 0x20000L /* Every byte has a single page */
+#define MAX_FADDR 1 /* 1 byte per page */
+#define SKFDDI_PSZ 8 /* address PROM size */
+
+/* macros ********************************************************************/
+
+/*
+ * Receive and Transmit Queues
+ */
+#define Q_R1 0x0000 /* Receive Queue 1 */
+#define Q_R2 0x0080 /* Receive Queue 2 */
+#define Q_XS1 0x0200 /* Synchronous Transmit Queue 1 */
+#define Q_XA1 0x0280 /* Asynchronous Transmit Queue 1 */
+#define Q_XS2 0x0300 /* Synchronous Transmit Queue 2 */
+#define Q_XA2 0x0380 /* Asynchronous Transmit Queue 2 */
+
+/*
+ * Macro Q_ADDR()
+ *
+ * Use this macro to address the Receive and Transmit Queue Registers.
+ *
+ * para Queue Queue to address.
+ * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2
+ * Offs Queue register offset.
+ * Values: Q_D, Q_DA_L ... Q_T2, Q_T3
+ *
+ * usage SK_IN32(pAC,Q_ADDR(Q_R2,Q_BC),pVal)
+ */
+#define Q_ADDR(Queue,Offs) (B8_Q_REGS + (Queue) + (Offs))
+
+/*
+ * Macro RB_ADDR()
+ *
+ * Use this macro to address the RAM Buffer Registers.
+ *
+ * para Queue Queue to address.
+ * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2
+ * Offs Queue register offset.
+ * Values: RB_START, RB_END ... RB_LEV, RB_CTRL
+ *
+ * usage SK_IN32(pAC,RB_ADDR(Q_R2,RB_RP),pVal)
+ */
+#define RB_ADDR(Queue,Offs) (B16_RAM_REGS + (Queue) + (Offs))
+
+
+/*
+ * MAC Related Registers
+ */
+#define MAC_1 0 /* belongs to the port near the slot */
+#define MAC_2 1 /* belongs to the port far away from the slot */
+
+/*
+ * Macro MR_ADDR()
+ *
+ * Use this macro to address a MAC Related Registers in side the ASIC.
+ *
+ * para Queue Queue to address.
+ * Values: TXA_ITI_INI ... TXA_TEST,
+ * RX_MFF_EA ... RX_LED_TST,
+ * LNK_SYNC_INI ... LNK_LED_REG, and
+ * TX_MFF_EA ... TX_LED_TST
+ * Mac MAC to address.
+ * Values: MAC_1, MAC_2
+ *
+ * usage SK_IN32(pAC,MR_ADDR(MAC_1,TX_MFF_EA),pVal)
+ */
+#define MR_ADDR(Mac,Offs) (((Mac) << 7) + (Offs))
+
+
+
+/*
+ * macros to access the XMAC
+ *
+ * XM_IN16(), to read a 16 bit register (e.g. XM_MMU_CMD)
+ * XM_OUT16(), to write a 16 bit register (e.g. XM_MMU_CMD)
+ * XM_IN32(), to read a 32 bit register (e.g. XM_TX_EV_CNT)
+ * XM_OUT32(), to write a 32 bit register (e.g. XM_TX_EV_CNT)
+ * XM_INADDR(), to read a network address register (e.g. XM_SRC_CHK)
+ * XM_OUTADDR(), to write a network address register (e.g. XM_SRC_CHK)
+ * XM_INHASH(), to read the XM_HSM_CHK register
+ * XM_OUTHASH() to write the XM_HSM_CHK register
+ *
+ * para: Mac XMAC to address values: MAC_1 or MAC_2
+ * IoC I/O context needed for SK IO macros
+ * Reg XMAC Register to read or write
+ * (p)Val Value or pointer to the value which should be read or
+ * written.
+ *
+ * usage: XM_OUT16(IoC, MAC_1, XM_MMU_CMD, Value) ;
+ */
+
+#ifdef SK_LITTLE_ENDIAN
+#define XM_WORD_LO 0
+#define XM_WORD_HI 1
+#else /* !SK_LITTLE_ENDIAN */
+#define XM_WORD_LO 1
+#define XM_WORD_HI 0
+#endif /* !SK_LITTLE_ENDIAN */
+
+#define XMA(Mac,Reg) (((0x1000 << (Mac)) + 0x1000) | ((Reg) << 1))
+
+#define XM_IN16(IoC,Mac,Reg,pVal) SK_IN16((IoC),XMA((Mac),(Reg)),(pVal))
+#define XM_OUT16(IoC,Mac,Reg,Val) SK_OUT16((IoC),XMA((Mac),(Reg)),(Val))
+
+#define XM_IN32(IoC,Mac,Reg,pVal) { \
+ SK_IN16((IoC),XMA((Mac),(Reg)), \
+ (SK_U16 *)&((SK_U16 *)(pVal))[XM_WORD_LO]); \
+ SK_IN16((IoC),XMA((Mac),(Reg+2)), \
+ (SK_U16 *)&((SK_U16 *)(pVal))[XM_WORD_HI]); \
+}
+
+#define XM_OUT32(IoC,Mac,Reg,Val) { \
+ SK_OUT16((IoC),XMA((Mac),(Reg)), (SK_U16)((Val) & 0x0000ffffL));\
+ SK_OUT16((IoC),XMA((Mac),(Reg+2)),(SK_U16)(((Val)>>16) & 0x0000ffffL));\
+}
+
+/*
+ * Remember: we are always writing to / reading from LITTLE ENDIAN memory
+ */
+
+#define XM_INADDR(IoC, Mac, Reg, pVal) { \
+ SK_U16 Word; \
+ SK_U8 *pByte; \
+ pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
+ SK_IN16((IoC), XMA((Mac), (Reg)), &Word); \
+ pByte[0] = (SK_U8) (Word & 0x00ff); \
+ pByte[1] = (SK_U8) ((Word >> 8) & 0x00ff); \
+ SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word); \
+ pByte[2] = (SK_U8) (Word & 0x00ff); \
+ pByte[3] = (SK_U8) ((Word >> 8) & 0x00ff); \
+ SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word); \
+ pByte[4] = (SK_U8) (Word & 0x00ff); \
+ pByte[5] = (SK_U8) ((Word >> 8) & 0x00ff); \
+}
+
+#define XM_OUTADDR(IoC, Mac, Reg, pVal) { \
+ SK_U8 *pByte; \
+ pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
+ SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16) \
+ (((SK_U16)(pByte[0]) & 0x00ff)| \
+ (((SK_U16)(pByte[1]) << 8) & 0xff00))); \
+ SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16) \
+ (((SK_U16)(pByte[2]) & 0x00ff)| \
+ (((SK_U16)(pByte[3]) << 8) & 0xff00))); \
+ SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16) \
+ (((SK_U16)(pByte[4]) & 0x00ff)| \
+ (((SK_U16)(pByte[5]) << 8) & 0xff00))); \
+}
+
+#define XM_INHASH(IoC, Mac, Reg, pVal) { \
+ SK_U16 Word; \
+ SK_U8 *pByte; \
+ pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
+ SK_IN16((IoC), XMA((Mac), (Reg)), &Word); \
+ pByte[0] = (SK_U8) (Word & 0x00ff); \
+ pByte[1] = (SK_U8) ((Word >> 8) & 0x00ff); \
+ SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word); \
+ pByte[2] = (SK_U8) (Word & 0x00ff); \
+ pByte[3] = (SK_U8) ((Word >> 8) & 0x00ff); \
+ SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word); \
+ pByte[4] = (SK_U8) (Word & 0x00ff); \
+ pByte[5] = (SK_U8) ((Word >> 8) & 0x00ff); \
+ SK_IN16((IoC), XMA((Mac), (Reg+6)), &Word); \
+ pByte[6] = (SK_U8) (Word & 0x00ff); \
+ pByte[7] = (SK_U8) ((Word >> 8) & 0x00ff); \
+}
+
+#define XM_OUTHASH(IoC, Mac, Reg, pVal) { \
+ SK_U8 *pByte; \
+ pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
+ SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16) \
+ (((SK_U16)(pByte[0]) & 0x00ff)| \
+ (((SK_U16)(pByte[1]) << 8) & 0xff00))); \
+ SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16) \
+ (((SK_U16)(pByte[2]) & 0x00ff)| \
+ (((SK_U16)(pByte[3]) << 8) & 0xff00))); \
+ SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16) \
+ (((SK_U16)(pByte[4]) & 0x00ff)| \
+ (((SK_U16)(pByte[5]) << 8) & 0xff00))); \
+ SK_OUT16((IoC), XMA((Mac), (Reg+6)), (SK_U16) \
+ (((SK_U16)(pByte[6]) & 0x00ff)| \
+ (((SK_U16)(pByte[7]) << 8) & 0xff00))); \
+}
+
+/*
+ * Different PHY Types
+ */
+#define SK_PHY_XMAC 0 /* integrated in Xmac II*/
+#define SK_PHY_BCOM 1 /* Broadcom BCM5400 */
+#define SK_PHY_LONE 2 /* Level One LXT1000 */
+#define SK_PHY_NAT 3 /* National DP83891 */
+
+/*
+ * PHY addresses (bits 8..12 of PHY address reg)
+ */
+#define PHY_ADDR_XMAC (0<<8)
+#define PHY_ADDR_BCOM (1<<8)
+#define PHY_ADDR_LONE (3<<8)
+#define PHY_ADDR_NAT (0<<8)
+
+/*
+ * macros to access the PHY
+ *
+ * PHY_READ() read a 16 bit value from the PHY
+ * PHY_WIRTE() write a 16 bit value to the PHY
+ *
+ * para: IoC I/O context needed for SK IO macros
+ * pPort Pointer to port struct for PhyAddr
+ * Mac XMAC to address values: MAC_1 or MAC_2
+ * PhyReg PHY Register to read or write
+ * (p)Val Value or pointer to the value which should be read or
+ * written.
+ *
+ * usage: PHY_READ(IoC, pPort, MAC_1, PHY_CTRL, Value);
+ */
+#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \
+ SK_U16 Mmu; \
+ \
+ XM_OUT16((IoC),(Mac), XM_PHY_ADDR, (PhyReg)|(pPort)->PhyAddr); \
+ XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \
+ if ((pPort)->PhyType != SK_PHY_XMAC) { \
+ do { \
+ XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
+ } while ((Mmu & XM_MMU_PHY_RDY) == 0); \
+ XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \
+ } \
+}
+
+#define PHY_WRITE(IoC, pPort, Mac, PhyReg, Val) { \
+ SK_U16 Mmu; \
+ \
+ if ((pPort)->PhyType != SK_PHY_XMAC) { \
+ do { \
+ XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
+ } while ((Mmu & XM_MMU_PHY_BUSY) != 0); \
+ } \
+ XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg)|(pPort)->PhyAddr); \
+ XM_OUT16((IoC), (Mac), XM_PHY_DATA, (Val)); \
+ if ((pPort)->PhyType != SK_PHY_XMAC) { \
+ do { \
+ XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
+ } while ((Mmu & XM_MMU_PHY_BUSY) != 0); \
+ } \
+}
+
+/*
+ * Macro PCI_C()
+ *
+ * Use this macro to address PCI config register from the IO space.
+ *
+ * para Addr PCI configuration register to address.
+ * Values: PCI_VENDOR_ID ... PCI_VPD_ADDR,
+ *
+ * usage SK_IN16(pAC,PCI_C(PCI_VENDOR_ID),pVal);
+ */
+#define PCI_C(Addr) (B7_CFG_SPC + (Addr)) /* PCI Config Space */
+
+/*
+ * Macro SK_ADDR(Base,Addr)
+ *
+ * Calculates the effective HW address
+ *
+ * para Base IO- or memory base address
+ * Addr Address offset
+ *
+ * usage: May be used in SK_INxx and SK_OUTxx macros
+ * #define SK_IN8(pAC,Addr,pVal) ...\
+ * *pVal = (SK_U8) inp(SK_ADDR(pAC->Hw.Iop,Addr)))
+ */
+#ifdef SK_MEM_MAPPED_IO
+#define SK_HW_ADDR(Base,Addr) ((Base)+(Addr))
+#else /* SK_MEM_MAPPED_IO */
+#define SK_HW_ADDR(Base,Addr) ((Base)+(((Addr)&0x7F)|((Addr)>>7 ? 0x80:0)))
+#endif /* SK_MEM_MAPPED_IO */
+
+#define SZ_LONG (sizeof(SK_U32))
+
+/*
+ * Macro SK_HWAC_LINK_LED()
+ *
+ * Use this macro to set the link LED mode.
+ * para pAC Pointer to adapter context struct
+ * IoC I/O context needed for SK IO macros
+ * Port Port number
+ * Mode Mode to set for this LED
+ */
+#define SK_HWAC_LINK_LED(pAC, IoC, Port, Mode) \
+SK_OUT8(IoC, MR_ADDR(Port,LNK_LED_REG), Mode);
+
+
+/* typedefs *******************************************************************/
+
+
+/* function prototypes ********************************************************/
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INC_SKGEHW_H */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)