patch-2.2.14 linux/arch/s390/boot/ipleckd.S

• Lines: 290
• Date: Tue Jan 4 10:12:12 2000
• Orig file: v2.2.13/linux/arch/s390/boot/ipleckd.S
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.2.13/linux/arch/s390/boot/ipleckd.S linux/arch/s390/boot/ipleckd.S
@@ -0,0 +1,289 @@
+#
+#  arch/s390/boot/ipleckd.S
+#    IPL record for 3380/3390 DASD
+#
+#  S390 version
+#    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+#    Author(s): Holger Smolinski <Holger.Smolinski@de.ibm.com>
+#
+#
+# FIXME:	 should use the countarea to determine the blocksize
+# FIXME:	 should insert zeroes into memory when filling holes
+# FIXME:	 calculate blkpertrack from rdc data and blksize
+
+# Usage of registers
+# r1:	ipl subchannel ( general use, dont overload without save/restore !)
+# r10:
+# r13:	base register 	index to 0x0000
+# r14:	callers address
+# r15:	temporary save register (we have no stack!)
+	.org 0
+.psw:	.long 0x00080000,0x80000000+_start
+.ccw1:	.long 0x06000000,0x00001000     # Re-Read enough of bootsector to start
+.ccw2:	.long 0x00000000,0x00000000	# read countarea of record 1 to s/w.
+
+	.org 0x58
+.Lextn:	.long	0x000a0000,0x00000000+.Lextn
+.Lsvcn:	.long	0x000a0000,0x00000000+.Lsvcn
+.Lprgn:	.long	0x000a0000,0x00000000+.Lprgn
+.Lmcn:	.long	0x000a0000,0x00000000+.Lmcn
+.Lion:	.long   0x00080000,0x80000000+.Lionewaddr
+
+	.org 0xd0	
+.Lnull:	
+	.long 0x00000000,0x00000000
+	.org 0xe0
+.Llstad:.long 	0x00000000,0x00000000	# sectorno + ct of bootlist
+
+	.org 0xf0			# Lets start now...
+_start: .globl _start
+	l  	%r1,0xb8		# get IPL-subchannel from lowcore
+	stsch	.Lrdcdata
+	oi      .Lrdcdata+5,0x80        # enable ssch
+	oi	.Lrdcdata+27,0x01	# enalbe concurrent sense
+	msch	.Lrdcdata
+	l	%r2,.Lparm
+	mvc     0x0(8,%r2),.Lnull      # set parmarea to null
+	lctl	%c6,%c6,.Lc6     	# enable all interrupts
+.Lrdc:					# read device characteristics
+	la	%r6,.Lrdcccw     
+	st      %r6,.Lorb+8		# store cp-address to orb
+	bras    %r15,.Lssch		# start I/O
+	oi	.Llodata+1,0x80
+	lh	%r5,.Lcountarea+6	# init r5 from countarea
+	stcm	%r5,3,.Lrdccw+2		# and store into rd template *FIXME*
+	stcm	%r5,3,.Llodata+14	# and store into lodata *FIXME*
+.Lbootlist:	
+	l	%r2,.Llstad	
+	l	%r3,.Lblklst     
+	lhi	%r4,1
+	bras	%r14,.Lreadblks
+.Lloader:	
+	l	%r10,.Lblklst     	# r10 is index to bootlist
+	lhi	%r5,4			# r5:	skip 4 blocks = firstpage....
+.Lkloop:
+	clc	.Lnull(8),0(%r10)	# test blocklist	
+	jz	.Lchkparm		# end of list?
+	l	%r2,0(%r10)		# get startblock to r2
+	slr	%r4,%r4			# erase r4
+	icm	%r4,1,7(%r10)		# get blockcount
+	slr	%r3,%r3			# get address to r3
+	icm 	%r3,0xe,4(%r10)
+	chi	%r5,0			# still blocks to skip?
+	jz	.Ldoread		# no: start reading
+	cr	%r5,%r4			# #skipblocks >= blockct?
+	jm	.L007			# no: skip the blocks one by one
+.L006:	
+	sr	%r5,%r4			# decrease number of blocks to skip
+	j	.Lkcont			# advance to next entry
+.L007:	
+	ahi	%r2,1			# skip 1 block...
+	bctr    %r4,0                   # update blockct
+	ah	%r3,.Lcountarea+6       # increment address
+	bct	%r5,.L007		# 4 blocks skipped?
+.Ldoread:
+	ltr	%r2,%r2			# test startblock
+	jz	.Lzeroes		# startblocks is zero (hole)
+.Ldiskread:	
+	bras	%r14,.Lreadblks
+	j	.Lkcont
+.Lzeroes:
+	lr	%r2,%r3
+	slr	%r3,%r3
+	icm	%r3,3,.Lcountarea+6      # get blocksize
+.L008:	slr	%r5,%r5			# no bytes to move
+	mvcle	%r2,%r4,0(%r10)		# fill zeroes to storage
+	jo	.L008			# until block is filled
+	bctr	%r4,0			# skip to next block
+	a  	%r2,.Lcountarea+6       # proceed loadaddress
+	jnz	.Lzeroes		# proceed for additional blocks
+.Lkcont:	
+	ahi	%r10,8
+	j	.Lkloop
+.Lchkparm:
+	lm	%r3,%r4,.Lstart         # load .Lstart and .Lparm
+	clc	0x0(4,%r4),.Lnull     
+	je	.Lrunkern
+	mvc	0x480(128,%r3),0(%r4)	# move 1k-0x80 to parmarea
+	mvc	0x500(256,%r3),0x80(%r4)
+	mvc	0x600(256,%r3),0x180(%r4)
+	mvc	0x700(256,%r3),0x280(%r4)
+.Lrunkern:
+	lhi	%r2,17
+	sll	%r2,12
+	st	%r1,0xc6c(%r2)		# store iplsubchannel to lowcore
+	st	%r1,0xc6c		# store iplsubchannel to lowcore
+	br	%r3
+# This function does the start IO
+# r2:	number of first block to read ( input by caller )
+# r3:	address to read data to ( input by caller )
+# r4:	number of blocks to read ( input by caller )
+# r5:	destroyed
+# r6:	blocks per track ( input by caller )
+# r7:	number of heads 
+# r8:	
+# r9:	
+# r10:	
+# r11:	temporary register
+# r12:	local use for base address
+# r13:	base address for module
+# r14:	address of caller for subroutine
+# r15:	temporary save register (since we have no stack)
+.Lreadblks:
+	la	%r12,.Ldeccw     
+	st	%r12,8+.Lorb		# store cpaddr to orb
+	ahi	%r12,0x10		# increment r12 to point to rdccw
+	oi	1(%r12),0x40		# set CC in rd template
+	# first setup the read CCWs
+	lr	%r15,%r4		# save number or blocks
+	slr	%r7,%r7
+	icm	%r7,3,.Lrdcdata+14      # load heads to r7
+	clc	.Lrdcdata+3(2),.L3390     
+	jne	.L010			# 3380 or 3390 ?
+	lhi	%r6,12			# setup r6 correct!
+	j	.L011
+.L010:	
+	lhi	%r6,10	
+.L011:	
+	# loop for nbl times
+.Lrdloop:	
+	mvc	0(8,%r12),.Lrdccw     	# copy template to this ccw
+	st	%r3,4(%r12)		# store target address to this ccw
+	bct	%r4,.L005		# decrement no of blks still to do
+	ni	1(%r12),0x3f		# delete CC from last ccw
+	lr	%r4,%r15		# restore number of blocks
+	# read CCWs are setup now		
+	stcm	%r4,3,.Llodata+2     	# store blockno to lodata clears r4
+	ar	%r4,%r2			# r4 (clear): ebl = blk + nbl
+	bctr    %r4,0			# decrement r4 ( last blk touched 
+	srda	%r2,32			# trk = blk / bpt, bot = blk % bpt 
+	dr	%r2,%r6			# r3: trk, r2: bot
+	ahi	%r2,1			# bot++ ( we start counting at 1 )
+	stcm	%r2,1,.Llodata+12     	# store bot to lodata
+	xr 	%r2,%r2			# cy  = trk / heads, hd  = trk % heads
+	dr	%r2,%r7			# r3: cy, r2: hd
+	sll	%r3,16			# combine to CCHH in r3
+	or	%r3,%r2
+	st	%r3,.Ldedata+8     	# store cchh to dedata	
+	st	%r3,.Llodata+4     	# store cchh to lodata	
+	st	%r3,.Llodata+8     	# store cchh to lodata	
+	lr	%r15,%r5		# save r5
+	srda	%r4,32			# tr2 = ebl / bpt
+	dr	%r4,%r6			# r5: tr2, r4: bot2
+	xr 	%r4,%r4			# cy2 = tr2 / heads, hd2 = hd2 % heads
+	dr	%r4,%r7			# r5: cy2, r4: hd2 
+	stcm	%r5,3,.Ldedata+12     	# store cy2,hd2 to dedata
+	stcm	%r4,3,.Ldedata+14     	# store cy2,hd2 to dedata
+	lr	%r5,%r15		# restore r5
+	# CCWs are setup now, arent they?
+	bras	%r15,.Lssch		# start I/O
+	br	%r14			# return to caller
+.L005:	
+	ah 	%r3,.Lcountarea+6     	# add blocksize to target address
+	ahi	%r12,8			# add sizeof(ccw) to base address
+	j	.Lrdloop
+# end of function
+# This function does the start IO
+# r1:	Subchannel number
+# r8:	ORB address
+# r9:	IRB address
+.Lssch:
+	lhi     %r13,10			# initialize retries
+.L012:	
+	ssch	.Lorb			# start I/O
+	jz	.Ltpi			# ok?
+	bras	%r14,.Ldisab		# error
+.Ltpi:	
+	lpsw	.Lwaitpsw     		# load wait-PSW
+.Lionewaddr:	
+	c	%r1,0xb8     		# compare to ipl subhchannel
+	jnz	.Ltpi			# not equal: loop
+	clc	0xbc(4),.Lorb 		# cross check the intparm
+	jnz	.Ltpi               	# not equal:	loop 
+	tsch    .Lirb			# get status
+	tm	.Lirb+9,0xff		# channel status ?
+	jz	.L003			# CS == 0x00
+	bras	%r14,.Ldisab		# error
+.L003:
+	tm	.Lirb+8,0xf3		# DS different from CE/DE
+	jz	.L004			# ok ?
+	bct	%r13,.L012		# retries <= 5 ?
+	bras	%r14,.Ldisab		# error
+.L004:
+	tm	.Lirb+8,0x04		# DE set?
+	jz	.Ltpi			# DE not set, loop
+.Lsschend:
+	br	%r15			# return to caller
+# end of function
+# In case of error goto disabled wait with %r14 containing the caller
+.Ldisab:
+	st	%r14,.Ldisabpsw+4     
+	lpsw	.Ldisabpsw     
+
+# FIXME pre-initialized data should be listed first
+# NULLed storage can be taken from anywhere ;) 
+.L3390:	
+	.word	0x3390
+.Lblklst:	
+	.long   0x00002000     
+	.align 8
+.Ldisabpsw: 
+	.long 0x000a0000,0x00000000
+.Lwaitpsw:
+	.long 0x020a0000,0x00000000+.Ltpi
+.Lorb:	
+	.long 0x0049504c,0x0080ff00	# intparm is " IPL"
+	.long 0x00000000		# CCW address
+.Lc6:	.long 0xff000000
+.Lstart:
+	.long	0x00010000              # do not separate .Lstart and .Lparm
+.Lparm:	
+	.long	0x00008000              # they are loaded with a LM
+.Lrdcdata:
+	.long 0x00000000,0x00000000
+	.long 0x00000000,0x00000000
+	.long 0x00000000,0x00000000
+	.long 0x00000000,0x00000000
+	.long 0x00000000,0x00000000
+	.long 0x00000000,0x00000000
+	.long 0x00000000,0x00000000
+	.long 0x00000000,0x00000000
+.Lirb:
+	.long 0x00000000,0x00000000
+	.long 0x00000000,0x00000000
+	.long 0x00000000,0x00000000
+	.long 0x00000000,0x00000000
+	.long 0x00000000,0x00000000
+	.long 0x00000000,0x00000000
+	.long 0x00000000,0x00000000
+	.long 0x00000000,0x00000000
+.Lcountarea:	
+	.word 0x0000			# cyl;
+	.word 0x0000			# head;
+	.byte 0x00			# record;
+	.byte 0x00			# key length;
+	.word 0x0000			# data length == blocksize;
+.Ldedata:
+	.long 0x40c00000,0x00000000
+	.long 0x00000000,0x00000000
+.Llodata:
+	.long 0x06000001,0x00000000
+	.long 0x00000000,0x01000000
+	.long 0x12345678
+	.org 0x3c8
+.Lrdcccw:				# CCW read device characteristics
+	.long 0x64400040,0x00000000+.Lrdcdata
+	.long 0x63400010,0x00000000+.Ldedata
+	.long 0x47400010,0x00000000+.Llodata
+	.long 0x12000008,0x00000000+.Lcountarea
+.Ldeccw:
+	.long 0x63400010,0x00000000+.Ldedata
+.Lloccw:
+	.long 0x47400010,0x00000000+.Llodata
+.Lrdccw:	
+	.long 0x86400000,0x00000000
+	.org 0x400
+# end of pre initialized data is here CCWarea follows
+# from here we load 1k blocklist 
+# end of function
+