patch-2.2.11 linux/drivers/net/olympic.c
Next file: linux/drivers/net/olympic.h
Previous file: linux/drivers/net/net_init.c
Back to the patch index
Back to the overall index
- Lines: 1662
- Date:
Mon Aug 9 12:04:39 1999
- Orig file:
v2.2.10/linux/drivers/net/olympic.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.2.10/linux/drivers/net/olympic.c linux/drivers/net/olympic.c
@@ -0,0 +1,1661 @@
+/*
+ * olympic.c (c) 1999 Peter De Schrijver All Rights Reserved
+ * 1999 Mike Phillips (phillim@amtrak.com)
+ *
+ * Linux driver for IBM PCI tokenring cards based on the Pit/Pit-Phy/Olympic
+ * chipset.
+ *
+ * Base Driver Skeleton:
+ * Written 1993-94 by Donald Becker.
+ *
+ * Copyright 1993 United States Government as represented by the
+ * Director, National Security Agency.
+ *
+ * Thanks to Erik De Cock, Adrian Bridgett and Frank Fiene for their
+ * assistance and perserverance with the testing of this driver.
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU Public License, incorporated herein by reference.
+ *
+ * 4/27/99 - Alpha Release 0.1.0
+ * First release to the public
+ *
+ * 6/8/99 - Official Release 0.2.0
+ * Merged into the kernel code
+ *
+ * To Do:
+ *
+ * Sanitize for smp
+ *
+ * If Problems do Occur
+ * Most problems can be rectified by either closing and opening the interface
+ * (ifconfig down and up) or rmmod and insmod'ing the driver (a bit difficult
+ * if compiled into the kernel).
+ */
+
+/* Change OLYMPIC_DEBUG to 1 to get verbose, and I mean really verbose, messages */
+
+#define OLYMPIC_DEBUG 0
+
+/* Change OLYMPIC_NETWORK_MONITOR to receive mac frames through the arb channel.
+ * Will also create a /proc/net/olympic_tr entry if proc_fs is compiled into the
+ * kernel.
+ * Intended to be used to create a ring-error reporting network module
+ * i.e. it will give you the source address of beaconers on the ring
+ */
+
+#define OLYMPIC_NETWORK_MONITOR 0
+
+#include <linux/config.h>
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/timer.h>
+#include <linux/in.h>
+#include <linux/ioport.h>
+#include <linux/string.h>
+#include <linux/proc_fs.h>
+#include <linux/ptrace.h>
+#include <linux/skbuff.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/trdevice.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <net/checksum.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include "olympic.h"
+
+/* I've got to put some intelligence into the version number so that Peter and I know
+ * which version of the code somebody has got.
+ * Version Number = a.b.c.d where a.b.c is the level of code and d is the latest author.
+ * So 0.0.1.pds = Peter, 0.0.1.mlp = Mike
+ *
+ * Official releases will only have an a.b.c version number format.
+ */
+
+static char *version =
+"Olympic.c v0.2.0 6/8/99 - Peter De Schrijver & Mike Phillips" ;
+
+static char *open_maj_error[] = {"No error", "Lobe Media Test", "Physical Insertion",
+ "Address Verification", "Neighbor Notification (Ring Poll)",
+ "Request Parameters","FDX Registration Request",
+ "FDX Duplicate Address Check", "Station registration Query Wait",
+ "Unknown stage"};
+
+static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost", "Wire Fault",
+ "Ring Speed Mismatch", "Timeout","Ring Failure","Ring Beaconing",
+ "Duplicate Node Address","Request Parameters","Remove Received",
+ "Reserved", "Reserved", "No Monitor Detected for RPL",
+ "Monitor Contention failer for RPL", "FDX Protocol Error"};
+
+/* Module paramters */
+
+/* Ring Speed 0,4,16,100
+ * 0 = Autosense
+ * 4,16 = Selected speed only, no autosense
+ * This allows the card to be the first on the ring
+ * and become the active monitor.
+ * 100 = Nothing at present, 100mbps is autodetected
+ * if FDX is turned on. May be implemented in the future to
+ * fail if 100mpbs is not detected.
+ *
+ * WARNING: Some hubs will allow you to insert
+ * at the wrong speed
+ */
+
+static int ringspeed[OLYMPIC_MAX_ADAPTERS] = {0,} ;
+
+MODULE_PARM(ringspeed, "1-" __MODULE_STRING(OLYMPIC_MAX_ADAPTERS) "i");
+
+/* Packet buffer size */
+
+static int pkt_buf_sz[OLYMPIC_MAX_ADAPTERS] = {0,} ;
+
+MODULE_PARM(pkt_buf_sz, "1-" __MODULE_STRING(OLYMPIC_MAX_ADAPTERS) "i") ;
+
+/* Message Level */
+
+static int message_level[OLYMPIC_MAX_ADAPTERS] = {0,} ;
+
+MODULE_PARM(message_level, "1-" __MODULE_STRING(OLYMPIC_MAX_ADAPTERS) "i") ;
+
+static int olympic_scan(struct device *dev);
+static int olympic_init(struct device *dev);
+static int olympic_open(struct device *dev);
+static int olympic_xmit(struct sk_buff *skb, struct device *dev);
+static int olympic_close(struct device *dev);
+static void olympic_set_rx_mode(struct device *dev);
+static void olympic_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static struct net_device_stats * olympic_get_stats(struct device *dev);
+static int olympic_set_mac_address(struct device *dev, void *addr) ;
+static void olympic_arb_cmd(struct device *dev);
+static int olympic_change_mtu(struct device *dev, int mtu);
+static void olympic_srb_bh(struct device *dev) ;
+static void olympic_asb_bh(struct device *dev) ;
+#if OLYMPIC_NETWORK_MONITOR
+#ifdef CONFIG_PROC_FS
+static int sprintf_info(char *buffer, struct device *dev) ;
+#endif
+#endif
+
+__initfunc(int olympic_probe(struct device *dev))
+{
+ int cards_found;
+
+ cards_found=olympic_scan(dev);
+ return cards_found ? 0 : -ENODEV;
+}
+
+__initfunc(static int olympic_scan(struct device *dev))
+{
+ struct pci_dev *pci_device = NULL ;
+ struct olympic_private *olympic_priv;
+ int card_no = 0 ;
+ if (pci_present()) {
+
+ while((pci_device=pci_find_device(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_TR_WAKE, pci_device))) {
+
+ pci_set_master(pci_device);
+
+ /* Check to see if io has been allocated, if so, we've already done this card,
+ so continue on the card discovery loop */
+
+ if (check_region(pci_device->base_address[0] & (~3), OLYMPIC_IO_SPACE)) {
+ card_no++ ;
+ continue ;
+ }
+
+ olympic_priv=kmalloc(sizeof (struct olympic_private), GFP_KERNEL);
+ memset(olympic_priv, 0, sizeof(struct olympic_private));
+#ifndef MODULE
+ dev=init_trdev(dev, 0);
+#endif
+ dev->priv=(void *)olympic_priv;
+#if OLYMPIC_DEBUG
+ printk("pci_device: %p, dev:%p, dev->priv: %p\n", pci_device, dev, dev->priv);
+#endif
+ dev->irq=pci_device->irq;
+ dev->base_addr=pci_device->base_address[0] & (~3);
+ dev->init=&olympic_init;
+ olympic_priv->olympic_mmio=ioremap(pci_device->base_address[1],256);
+ olympic_priv->olympic_lap=ioremap(pci_device->base_address[2],2048);
+
+ if ((pkt_buf_sz[card_no] < 100) || (pkt_buf_sz[card_no] > 18000) )
+ olympic_priv->pkt_buf_sz = PKT_BUF_SZ ;
+ else
+ olympic_priv->pkt_buf_sz = pkt_buf_sz[card_no] ;
+
+ olympic_priv->olympic_ring_speed = ringspeed[card_no] ;
+ olympic_priv->olympic_message_level = message_level[card_no] ;
+ olympic_priv->olympic_multicast_set = 0 ;
+
+ if(olympic_init(dev)==-1) {
+ unregister_netdevice(dev);
+ kfree(dev->priv);
+ return 0;
+ }
+
+ dev->open=&olympic_open;
+ dev->hard_start_xmit=&olympic_xmit;
+ dev->change_mtu=&olympic_change_mtu;
+
+ dev->stop=&olympic_close;
+ dev->do_ioctl=NULL;
+ dev->set_multicast_list=&olympic_set_rx_mode;
+ dev->get_stats=&olympic_get_stats ;
+ dev->set_mac_address=&olympic_set_mac_address ;
+ return 1;
+ }
+ }
+ return 0 ;
+}
+
+
+__initfunc(static int olympic_init(struct device *dev))
+{
+ struct olympic_private *olympic_priv;
+ __u8 *olympic_mmio, *init_srb,*adapter_addr;
+ unsigned long t;
+ unsigned int uaa_addr;
+
+ olympic_priv=(struct olympic_private *)dev->priv;
+ olympic_mmio=olympic_priv->olympic_mmio;
+
+ printk("%s \n", version);
+ printk("%s: IBM PCI tokenring card. I/O at %hx, MMIO at %p, LAP at %p, using irq %d\n",dev->name, (unsigned int) dev->base_addr,olympic_priv->olympic_mmio, olympic_priv->olympic_lap, dev->irq);
+
+ request_region(dev->base_addr, OLYMPIC_IO_SPACE, "olympic");
+ writel(readl(olympic_mmio+BCTL) | BCTL_SOFTRESET,olympic_mmio+BCTL);
+ t=jiffies;
+ while((readl(olympic_priv->olympic_mmio+BCTL)) & BCTL_SOFTRESET) {
+ schedule();
+ if(jiffies-t > 40*HZ) {
+ printk(KERN_ERR "IBM PCI tokenring card not responding.\n");
+ release_region(dev->base_addr, OLYMPIC_IO_SPACE) ;
+ return -1;
+ }
+ }
+
+#if OLYMPIC_DEBUG
+ printk("BCTL: %x\n",readl(olympic_mmio+BCTL));
+ printk("GPR: %x\n",readw(olympic_mmio+GPR));
+ printk("SISRMASK: %x\n",readl(olympic_mmio+SISR_MASK));
+#endif
+ /* Aaaahhh, You have got to be real careful setting GPR, the card
+ holds the previous values from flash memory, including autosense
+ and ring speed */
+
+ writel(readl(olympic_mmio+BCTL)|BCTL_MIMREB,olympic_mmio+BCTL);
+
+ if (olympic_priv->olympic_ring_speed == 0) { /* Autosense */
+ writel(readl(olympic_mmio+GPR)|GPR_AUTOSENSE,olympic_mmio+GPR);
+ if (olympic_priv->olympic_message_level)
+ printk(KERN_INFO "%s: Ringspeed autosense mode on\n",dev->name);
+ } else if (olympic_priv->olympic_ring_speed == 16) {
+ if (olympic_priv->olympic_message_level)
+ printk(KERN_INFO "%s: Trying to open at 16 Mbps as requested\n", dev->name);
+ writel(GPR_16MBPS, olympic_mmio+GPR);
+ } else if (olympic_priv->olympic_ring_speed == 4) {
+ if (olympic_priv->olympic_message_level)
+ printk(KERN_INFO "%s: Trying to open at 4 Mbps as requested\n", dev->name) ;
+ writel(0, olympic_mmio+GPR);
+ }
+
+ writel(readl(olympic_mmio+GPR)|GPR_NEPTUNE_BF,olympic_mmio+GPR);
+
+#if OLYMPIC_DEBUG
+ printk("GPR = %x\n",readw(olympic_mmio + GPR) ) ;
+#endif
+ /* start solo init */
+ writel((1<<15),olympic_mmio+SISR_MASK_SUM);
+
+ t=jiffies;
+ while(!((readl(olympic_mmio+SISR_RR)) & SISR_SRB_REPLY)) {
+ schedule();
+ if(jiffies-t > 40*HZ) {
+ printk(KERN_ERR "IBM PCI tokenring card not responding.\n");
+ release_region(dev->base_addr, OLYMPIC_IO_SPACE);
+ return -1;
+ }
+ }
+
+ writel(readl(olympic_mmio+LAPWWO),olympic_mmio+LAPA);
+
+#if OLYMPIC_DEBUG
+ printk("LAPWWO: %x, LAPA: %x\n",readl(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA));
+#endif
+
+ init_srb=olympic_priv->olympic_lap + ((readl(olympic_mmio+LAPWWO)) & (~0xf800));
+
+#if OLYMPIC_DEBUG
+{
+ int i;
+ printk("init_srb(%p): ",init_srb);
+ for(i=0;i<20;i++)
+ printk("%x ",readb(init_srb+i));
+ printk("\n");
+}
+#endif
+ if(readw(init_srb+6)) {
+ printk(KERN_INFO "tokenring card intialization failed. errorcode : %x\n",readw(init_srb+6));
+ release_region(dev->base_addr, OLYMPIC_IO_SPACE);
+ return -1;
+ }
+
+ uaa_addr=ntohs(readw(init_srb+8));
+
+#if OLYMPIC_DEBUG
+ printk("UAA resides at %x\n",uaa_addr);
+#endif
+
+ writel(uaa_addr,olympic_mmio+LAPA);
+ adapter_addr=olympic_priv->olympic_lap + (uaa_addr & (~0xf800));
+
+#if OLYMPIC_DEBUG
+ printk("adapter address: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ readb(adapter_addr), readb(adapter_addr+1),readb(adapter_addr+2),
+ readb(adapter_addr+3),readb(adapter_addr+4),readb(adapter_addr+5));
+#endif
+
+ memcpy_fromio(&dev->dev_addr[0], adapter_addr,6);
+
+ olympic_priv->olympic_addr_table_addr = ntohs(readw(init_srb + 12)) ;
+ olympic_priv->olympic_parms_addr = ntohs(readw(init_srb + 14)) ;
+
+ return 0;
+
+}
+
+static int olympic_open(struct device *dev)
+{
+ struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+ __u8 *olympic_mmio=olympic_priv->olympic_mmio,*init_srb;
+ unsigned long flags;
+ char open_error[255] ;
+ int i, open_finished = 1 ;
+
+#if OLYMPIC_NETWORK_MONITOR
+ __u8 *oat ;
+ __u8 *opt ;
+#endif
+
+ if(request_irq(dev->irq, &olympic_interrupt, SA_SHIRQ , "olympic", dev)) {
+ return -EAGAIN;
+ }
+
+#if OLYMPIC_DEBUG
+ printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM));
+ printk("pending ints: %x\n",readl(olympic_mmio+SISR_RR));
+#endif
+
+ writel(SISR_MI,olympic_mmio+SISR_MASK_SUM);
+
+ writel(SISR_MI | SISR_SRB_REPLY, olympic_mmio+SISR_MASK); /* more ints later, doesn't stop arb cmd interrupt */
+
+ writel(LISR_LIE,olympic_mmio+LISR); /* more ints later */
+
+ /* adapter is closed, so SRB is pointed to by LAPWWO */
+
+ writel(readl(olympic_mmio+LAPWWO),olympic_mmio+LAPA);
+ init_srb=olympic_priv->olympic_lap + ((readl(olympic_mmio+LAPWWO)) & (~0xf800));
+
+#if OLYMPIC_DEBUG
+ printk("LAPWWO: %x, LAPA: %x\n",readl(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA));
+ printk("SISR Mask = %04x\n", readl(olympic_mmio+SISR_MASK));
+ printk("Before the open command \n");
+#endif
+ do {
+ int i;
+
+ save_flags(flags);
+ cli();
+ for(i=0;i<SRB_COMMAND_SIZE;i+=4)
+ writel(0,init_srb+i);
+ if(SRB_COMMAND_SIZE & 2)
+ writew(0,init_srb+(SRB_COMMAND_SIZE & ~3));
+ if(SRB_COMMAND_SIZE & 1)
+ writeb(0,init_srb+(SRB_COMMAND_SIZE & ~1));
+
+ writeb(SRB_OPEN_ADAPTER,init_srb) ; /* open */
+ writeb(OLYMPIC_CLEAR_RET_CODE,init_srb+2);
+
+ /* If Network Monitor, instruct card to copy MAC frames through the ARB */
+
+#if OLYMPIC_NETWORK_MONITOR
+ writew(ntohs(OPEN_ADAPTER_ENABLE_FDX | OPEN_ADAPTER_PASS_ADC_MAC | OPEN_ADAPTER_PASS_ATT_MAC | OPEN_ADAPTER_PASS_BEACON),init_srb+8);
+#else
+ writew(OPEN_ADAPTER_ENABLE_FDX,init_srb+8);
+#endif
+
+ if (olympic_priv->olympic_laa[0]) {
+ writeb(olympic_priv->olympic_laa[0],init_srb+12);
+ writeb(olympic_priv->olympic_laa[1],init_srb+13);
+ writeb(olympic_priv->olympic_laa[2],init_srb+14);
+ writeb(olympic_priv->olympic_laa[3],init_srb+15);
+ writeb(olympic_priv->olympic_laa[4],init_srb+16);
+ writeb(olympic_priv->olympic_laa[5],init_srb+17);
+ memcpy(dev->dev_addr,olympic_priv->olympic_laa,dev->addr_len) ;
+ }
+ writeb(1,init_srb+30);
+
+ olympic_priv->srb_queued=1;
+
+ writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+
+ while(olympic_priv->srb_queued) {
+ interruptible_sleep_on_timeout(&olympic_priv->srb_wait, 60*HZ);
+ if(signal_pending(current)) {
+ printk(KERN_WARNING "%s: SRB timed out.\n",
+ dev->name);
+ printk(KERN_WARNING "SISR=%x MISR=%x\n",
+ readl(olympic_mmio+SISR),
+ readl(olympic_mmio+LISR));
+ olympic_priv->srb_queued=0;
+ break;
+ }
+ }
+ restore_flags(flags);
+#if OLYMPIC_DEBUG
+ printk("init_srb(%p): ",init_srb);
+ for(i=0;i<20;i++)
+ printk("%x ",readb(init_srb+i));
+ printk("\n");
+#endif
+
+ /* If we get the same return response as we set, the interrupt wasn't raised and the open
+ * timed out.
+ */
+
+ if(readb(init_srb+2)== OLYMPIC_CLEAR_RET_CODE) {
+ printk(KERN_WARNING "%s: Adapter Open time out or error.\n", dev->name) ;
+ return -EIO ;
+ }
+
+ if(readb(init_srb+2)!=0) {
+ if (readb(init_srb+2) == 0x07) {
+ if (!olympic_priv->olympic_ring_speed && open_finished) { /* Autosense , first time around */
+ printk(KERN_WARNING "%s: Retrying at different ring speed \n", dev->name);
+ open_finished = 0 ;
+ } else {
+
+ strcpy(open_error, open_maj_error[(readb(init_srb+7) & 0xf0) >> 4]) ;
+ strcat(open_error," - ") ;
+ strcat(open_error, open_min_error[(readb(init_srb+7) & 0x0f)]) ;
+
+ if (!olympic_priv->olympic_ring_speed && ((readb(init_srb+7) & 0x0f) == 0x0d)) {
+ printk(KERN_WARNING "%s: Tried to autosense ring speed with no monitors present\n",dev->name);
+ printk(KERN_WARNING "%s: Please try again with a specified ring speed \n",dev->name);
+ free_irq(dev->irq, dev);
+ return -EIO ;
+ }
+
+ printk(KERN_WARNING "%s: %s\n",dev->name,open_error);
+ free_irq(dev->irq,dev) ;
+ return -EIO ;
+
+ } /* if autosense && open_finished */
+ } else {
+ printk(KERN_WARNING "%s: Bad OPEN response: %x\n", dev->name,init_srb[2]);
+ free_irq(dev->irq, dev);
+ return -EIO;
+ }
+ } else
+ open_finished = 1 ;
+ } while (!(open_finished)) ; /* Will only loop if ring speed mismatch re-open attempted && autosense is on */
+
+ if (readb(init_srb+18) & (1<<3))
+ if (olympic_priv->olympic_message_level)
+ printk(KERN_INFO "%s: Opened in FDX Mode\n",dev->name);
+
+ if (readb(init_srb+18) & (1<<1))
+ olympic_priv->olympic_ring_speed = 100 ;
+ else if (readb(init_srb+18) & 1)
+ olympic_priv->olympic_ring_speed = 16 ;
+ else
+ olympic_priv->olympic_ring_speed = 4 ;
+
+ if (olympic_priv->olympic_message_level)
+ printk(KERN_INFO "%s: Opened in %d Mbps mode\n",dev->name, olympic_priv->olympic_ring_speed);
+
+ olympic_priv->asb=ntohs(readw(init_srb+8));
+ olympic_priv->srb=ntohs(readw(init_srb+10));
+ olympic_priv->arb=ntohs(readw(init_srb+12));
+ olympic_priv->trb=ntohs(readw(init_srb+16));
+
+ olympic_priv->olympic_receive_options = 0x01 ;
+ olympic_priv->olympic_copy_all_options = 0 ;
+
+ /* setup rx ring */
+
+ writel((3<<16),olympic_mmio+BMCTL_RWM); /* Ensure end of frame generated interrupts */
+
+ writel(BMCTL_RX_DIS|3,olympic_mmio+BMCTL_RWM); /* Yes, this the enables RX channel */
+
+ for(i=0;i<OLYMPIC_RX_RING_SIZE;i++) {
+
+ struct sk_buff *skb;
+
+ skb=dev_alloc_skb(olympic_priv->pkt_buf_sz);
+ if(skb == NULL)
+ break;
+
+ skb->dev = dev;
+
+ olympic_priv->olympic_rx_ring[i].buffer=virt_to_bus(skb->data);
+ olympic_priv->olympic_rx_ring[i].res_length = olympic_priv->pkt_buf_sz ;
+ olympic_priv->rx_ring_skb[i]=skb;
+ }
+
+ if (i==0) {
+ printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers. Adapter disabled\n",dev->name);
+ free_irq(dev->irq, dev);
+ return -EIO;
+ }
+
+ writel(virt_to_bus(&olympic_priv->olympic_rx_ring[0]),olympic_mmio+RXDESCQ);
+ writel(virt_to_bus(&olympic_priv->olympic_rx_ring[0]),olympic_mmio+RXCDA);
+ writew(i,olympic_mmio+RXDESCQCNT);
+
+ writel(virt_to_bus(&olympic_priv->olympic_rx_status_ring[0]),olympic_mmio+RXSTATQ);
+ writel(virt_to_bus(&olympic_priv->olympic_rx_status_ring[0]),olympic_mmio+RXCSA);
+
+ olympic_priv->rx_ring_last_received=OLYMPIC_RX_RING_SIZE-1; /* last processed rx status */
+ olympic_priv->rx_status_last_received = OLYMPIC_RX_RING_SIZE-1;
+
+ writew(i,olympic_mmio+RXSTATQCNT);
+
+#if OLYMPIC_DEBUG
+ printk("# of rx buffers: %d, RXENQ: %x\n",i, readw(olympic_mmio+RXENQ));
+ printk("RXCSA: %x, rx_status_ring[0]: %p\n",bus_to_virt(readl(olympic_mmio+RXCSA)),&olympic_priv->olympic_rx_status_ring[0]);
+ printk(" stat_ring[1]: %p, stat_ring[2]: %p, stat_ring[3]: %p\n", &(olympic_priv->olympic_rx_status_ring[1]), &(olympic_priv->olympic_rx_status_ring[2]), &(olympic_priv->olympic_rx_status_ring[3]) );
+ printk(" stat_ring[4]: %p, stat_ring[5]: %p, stat_ring[6]: %p\n", &(olympic_priv->olympic_rx_status_ring[4]), &(olympic_priv->olympic_rx_status_ring[5]), &(olympic_priv->olympic_rx_status_ring[6]) );
+ printk(" stat_ring[7]: %p\n", &(olympic_priv->olympic_rx_status_ring[7]) );
+
+ printk("RXCDA: %x, rx_ring[0]: %p\n",bus_to_virt(readl(olympic_mmio+RXCDA)),&olympic_priv->olympic_rx_ring[0]);
+#endif
+
+ writew((((readw(olympic_mmio+RXENQ)) & 0x8000) ^ 0x8000) | i,olympic_mmio+RXENQ);
+
+#if OLYMPIC_DEBUG
+ printk("# of rx buffers: %d, RXENQ: %x\n",i, readw(olympic_mmio+RXENQ));
+ printk("RXCSA: %x, rx_ring[0]: %p\n",bus_to_virt(readl(olympic_mmio+RXCSA)),&olympic_priv->olympic_rx_status_ring[0]);
+ printk("RXCDA: %x, rx_ring[0]: %p\n",bus_to_virt(readl(olympic_mmio+RXCDA)),&olympic_priv->olympic_rx_ring[0]);
+#endif
+
+ writel(SISR_RX_STATUS | SISR_RX_NOBUF,olympic_mmio+SISR_MASK_SUM);
+
+ /* setup tx ring */
+
+ writel(BMCTL_TX1_DIS,olympic_mmio+BMCTL_RWM); /* Yes, this enables TX channel 1 */
+ for(i=0;i<OLYMPIC_TX_RING_SIZE;i++)
+ olympic_priv->olympic_tx_ring[i].buffer=0xdeadbeef;
+
+ olympic_priv->free_tx_ring_entries=OLYMPIC_TX_RING_SIZE;
+ writel(virt_to_bus(&olympic_priv->olympic_tx_ring[0]),olympic_mmio+TXDESCQ_1);
+ writel(virt_to_bus(&olympic_priv->olympic_tx_ring[0]),olympic_mmio+TXCDA_1);
+ writew(OLYMPIC_TX_RING_SIZE,olympic_mmio+TXDESCQCNT_1);
+
+ writel(virt_to_bus(&olympic_priv->olympic_tx_status_ring[0]),olympic_mmio+TXSTATQ_1);
+ writel(virt_to_bus(&olympic_priv->olympic_tx_status_ring[0]),olympic_mmio+TXCSA_1);
+ writew(OLYMPIC_TX_RING_SIZE,olympic_mmio+TXSTATQCNT_1);
+
+ olympic_priv->tx_ring_free=0; /* next entry in tx ring to use */
+ olympic_priv->tx_ring_last_status=OLYMPIC_TX_RING_SIZE-1; /* last processed tx status */
+
+ writel(SISR_TX1_EOF | SISR_ADAPTER_CHECK | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_ASB_FREE,olympic_mmio+SISR_MASK_SUM);
+
+#if OLYMPIC_DEBUG
+ printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM));
+ printk("SISR MASK: %x\n",readl(olympic_mmio+SISR_MASK));
+#endif
+
+#if OLYMPIC_NETWORK_MONITOR
+ oat = (__u8 *)(olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr) ;
+ opt = (__u8 *)(olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr) ;
+
+ printk("%s: Node Address: %02x:%02x:%02x:%02x:%02x:%02x\n",dev->name,
+ readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)),
+ readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+1),
+ readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+2),
+ readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+3),
+ readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+4),
+ readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+5));
+ printk("%s: Functional Address: %02x:%02x:%02x:%02x\n",dev->name,
+ readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)),
+ readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+1),
+ readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2),
+ readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3));
+
+ printk("%s: NAUN Address: %02x:%02x:%02x:%02x:%02x:%02x\n",dev->name,
+ readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)),
+ readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+1),
+ readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+2),
+ readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+3),
+ readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+4),
+ readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+5));
+
+
+#endif
+
+ dev->start = 1;
+ dev->interrupt=0;
+ dev->tbusy=0;
+
+ MOD_INC_USE_COUNT ;
+ return 0;
+
+}
+
+/*
+ * When we enter the rx routine we do not know how many frames have been
+ * queued on the rx channel. Therefore we start at the next rx status
+ * position and travel around the receive ring until we have completed
+ * all the frames.
+ *
+ * This means that we may process the frame before we receive the end
+ * of frame interrupt. This is why we always test the status instead
+ * of blindly processing the next frame.
+ *
+ */
+static void olympic_rx(struct device *dev)
+{
+ struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+ __u8 *olympic_mmio=olympic_priv->olympic_mmio;
+ struct olympic_rx_status *rx_status;
+ struct olympic_rx_desc *rx_desc ;
+ int rx_ring_last_received,length, buffer_cnt, cpy_length, frag_len;
+ struct sk_buff *skb, *skb2;
+ int i;
+
+ rx_status=&(olympic_priv->olympic_rx_status_ring[(olympic_priv->rx_status_last_received + 1) & (OLYMPIC_RX_RING_SIZE - 1)]) ;
+
+ while (rx_status->status_buffercnt) {
+
+ olympic_priv->rx_status_last_received++ ;
+ olympic_priv->rx_status_last_received &= (OLYMPIC_RX_RING_SIZE -1);
+#if OLYMPIC_DEBUG
+ printk(" stat_ring addr: %x \n", &(olympic_priv->olympic_rx_status_ring[olympic_priv->rx_status_last_received]) );
+ printk("rx status: %x rx len: %x \n",rx_status->status_buffercnt,rx_status->fragmentcnt_framelen);
+#endif
+ length=rx_status->fragmentcnt_framelen & 0xffff;
+ buffer_cnt = rx_status->status_buffercnt & 0xffff ;
+ i = buffer_cnt ; /* Need buffer_cnt later for rxenq update */
+ frag_len = rx_status->fragmentcnt_framelen >> 16 ;
+
+#if OLYMPIC_DEBUG
+ printk("length: %x, frag_len: %x, buffer_cnt: %x\n",length,frag_len,buffer_cnt);
+#endif
+
+ if(rx_status->status_buffercnt & 0xC0000000) {
+ if (rx_status->status_buffercnt & 0x3B000000) {
+ if (olympic_priv->olympic_message_level) {
+ if (rx_status->status_buffercnt & (1<<29)) /* Rx Frame Truncated */
+ printk(KERN_WARNING "%s: Rx Frame Truncated \n",dev->name);
+ if (rx_status->status_buffercnt & (1<<28)) /*Rx receive overrun */
+ printk(KERN_WARNING "%s: Rx Frame Receive overrun \n",dev->name);
+ if (rx_status->status_buffercnt & (1<<27)) /* No receive buffers */
+ printk(KERN_WARNING "%s: No receive buffers \n",dev->name);
+ if (rx_status->status_buffercnt & (1<<25)) /* Receive frame error detect */
+ printk(KERN_WARNING "%s: Receive frame error detect \n",dev->name);
+ if (rx_status->status_buffercnt & (1<<24)) /* Received Error Detect */
+ printk(KERN_WARNING "%s: Received Error Detect \n",dev->name);
+ }
+ olympic_priv->rx_ring_last_received += i ;
+ olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ;
+ olympic_priv->olympic_stats.rx_errors++;
+ } else {
+
+ if (buffer_cnt == 1) {
+ skb = dev_alloc_skb(olympic_priv->pkt_buf_sz) ;
+ } else {
+ skb = dev_alloc_skb(length) ;
+ }
+
+ if (skb == NULL) {
+ printk(KERN_WARNING "%s: Not enough memory to copy packet to upper layers. \n",dev->name) ;
+ olympic_priv->olympic_stats.rx_dropped++ ;
+ /* Update counters even though we don't transfer the frame */
+ olympic_priv->rx_ring_last_received += i ;
+ olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ;
+ } else {
+ skb->dev = dev ;
+
+ /* Optimise based upon number of buffers used.
+ If only one buffer is used we can simply swap the buffers around.
+ If more than one then we must use the new buffer and copy the information
+ first. Ideally all frames would be in a single buffer, this can be tuned by
+ altering the buffer size. */
+
+ if (buffer_cnt==1) {
+ olympic_priv->rx_ring_last_received++ ;
+ olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1);
+ rx_ring_last_received = olympic_priv->rx_ring_last_received ;
+ skb2=olympic_priv->rx_ring_skb[rx_ring_last_received] ;
+ skb_put(skb2,length);
+ skb2->protocol = tr_type_trans(skb2,dev);
+ olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer=virt_to_bus(skb->data);
+ olympic_priv->olympic_rx_ring[rx_ring_last_received].res_length = olympic_priv->pkt_buf_sz ;
+ olympic_priv->rx_ring_skb[rx_ring_last_received] = skb ;
+ netif_rx(skb2) ;
+ } else {
+ do { /* Walk the buffers */
+ olympic_priv->rx_ring_last_received++ ;
+ olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1);
+ rx_ring_last_received = olympic_priv->rx_ring_last_received ;
+ rx_desc = &(olympic_priv->olympic_rx_ring[rx_ring_last_received]);
+ cpy_length = (i == 1 ? frag_len : rx_desc->res_length);
+ memcpy(skb_put(skb, cpy_length), bus_to_virt(rx_desc->buffer), cpy_length) ;
+ } while (--i) ;
+
+ skb->protocol = tr_type_trans(skb,dev);
+ netif_rx(skb) ;
+ }
+ olympic_priv->olympic_stats.rx_packets++ ;
+ olympic_priv->olympic_stats.rx_bytes += length ;
+ } /* if skb == null */
+ } /* If status & 0x3b */
+
+ } else { /*if buffercnt & 0xC */
+ olympic_priv->rx_ring_last_received += i ;
+ olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE - 1) ;
+ }
+
+ rx_status->fragmentcnt_framelen = 0 ;
+ rx_status->status_buffercnt = 0 ;
+ rx_status = &(olympic_priv->olympic_rx_status_ring[(olympic_priv->rx_status_last_received+1) & (OLYMPIC_RX_RING_SIZE -1) ]);
+
+ writew((((readw(olympic_mmio+RXENQ)) & 0x8000) ^ 0x8000) | buffer_cnt , olympic_mmio+RXENQ);
+ } /* while */
+
+}
+
+static void olympic_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct device *dev= (struct device *)dev_id;
+ struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+ __u8 *olympic_mmio=olympic_priv->olympic_mmio;
+ __u32 sisr;
+ __u8 *adapter_check_area ;
+
+ sisr=readl(olympic_mmio+SISR_RR) ; /* Reset sisr */
+
+ if (!(sisr & SISR_MI)) /* Interrupt isn't for us */
+ return ;
+
+ if (dev->interrupt)
+ printk(KERN_WARNING "%s: Re-entering interrupt \n",dev->name) ;
+
+ dev->interrupt = 1 ;
+
+ if (sisr & (SISR_SRB_REPLY | SISR_TX1_EOF | SISR_RX_STATUS | SISR_ADAPTER_CHECK |
+ SISR_ASB_FREE | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_RX_NOBUF)) {
+
+ if(sisr & SISR_SRB_REPLY) {
+ if(olympic_priv->srb_queued==1) {
+ wake_up_interruptible(&olympic_priv->srb_wait);
+ } else if (olympic_priv->srb_queued==2) {
+ olympic_srb_bh(dev) ;
+ }
+ olympic_priv->srb_queued=0;
+ } /* SISR_SRB_REPLY */
+
+ if (sisr & SISR_TX1_EOF) {
+ olympic_priv->tx_ring_last_status++;
+ olympic_priv->tx_ring_last_status &= (OLYMPIC_TX_RING_SIZE-1);
+ olympic_priv->free_tx_ring_entries++;
+ olympic_priv->olympic_stats.tx_bytes += olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]->len;
+ olympic_priv->olympic_stats.tx_packets++ ;
+ dev_kfree_skb(olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]);
+ olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_last_status].buffer=0xdeadbeef;
+ olympic_priv->olympic_tx_status_ring[olympic_priv->tx_ring_last_status].status=0;
+
+ if(dev->tbusy) {
+ dev->tbusy=0;
+ mark_bh(NET_BH);
+ }
+ } /* SISR_TX1_EOF */
+
+ if (sisr & SISR_RX_STATUS) {
+ olympic_rx(dev);
+ } /* SISR_RX_STATUS */
+
+ if (sisr & SISR_ADAPTER_CHECK) {
+ printk(KERN_WARNING "%s: Adapter Check Interrupt Raised, 8 bytes of information follow:\n", dev->name);
+ writel(readl(olympic_mmio+LAPWWO),olympic_mmio+LAPA);
+ adapter_check_area = (__u8 *)(olympic_mmio+LAPWWO) ;
+ printk(KERN_WARNING "%s: Bytes %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",dev->name, readb(adapter_check_area+0), readb(adapter_check_area+1), readb(adapter_check_area+2), readb(adapter_check_area+3), readb(adapter_check_area+4), readb(adapter_check_area+5), readb(adapter_check_area+6), readb(adapter_check_area+7)) ;
+ dev->interrupt = 0 ;
+ free_irq(dev->irq, dev) ;
+
+ } /* SISR_ADAPTER_CHECK */
+
+ if (sisr & SISR_ASB_FREE) {
+ /* Wake up anything that is waiting for the asb response */
+ if (olympic_priv->asb_queued) {
+ olympic_asb_bh(dev) ;
+ }
+ } /* SISR_ASB_FREE */
+
+ if (sisr & SISR_ARB_CMD) {
+ olympic_arb_cmd(dev) ;
+ } /* SISR_ARB_CMD */
+
+ if (sisr & SISR_TRB_REPLY) {
+ /* Wake up anything that is waiting for the trb response */
+ if (olympic_priv->trb_queued) {
+ wake_up_interruptible(&olympic_priv->trb_wait);
+ }
+ olympic_priv->trb_queued = 0 ;
+ } /* SISR_TRB_REPLY */
+
+ if (sisr & SISR_RX_NOBUF) {
+ /* According to the documentation, we don't have to do anything, but trapping it keeps it out of
+ /var/log/messages. */
+ } /* SISR_RX_NOBUF */
+ } else {
+ printk(KERN_WARNING "%s: Unexpected interrupt: %x\n",dev->name, sisr);
+ printk(KERN_WARNING "%s: SISR_MASK: %x\n",dev->name, readl(olympic_mmio+SISR_MASK)) ;
+ } /* One if the interrupts we want */
+
+ dev->interrupt = 0 ;
+
+ writel(SISR_MI,olympic_mmio+SISR_MASK_SUM);
+
+}
+
+static int olympic_xmit(struct sk_buff *skb, struct device *dev)
+{
+ struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+ __u8 *olympic_mmio=olympic_priv->olympic_mmio;
+
+ if (test_and_set_bit(0, (void*)&dev->tbusy) != 0) {
+ return 1;
+ }
+
+ if(olympic_priv->free_tx_ring_entries) {
+ olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_free].buffer=virt_to_bus(skb->data);
+ olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_free].status_length=skb->len | (0x80000000);
+ olympic_priv->tx_ring_skb[olympic_priv->tx_ring_free]=skb;
+ olympic_priv->free_tx_ring_entries--;
+
+ olympic_priv->tx_ring_free++;
+ olympic_priv->tx_ring_free &= (OLYMPIC_TX_RING_SIZE-1);
+
+
+ writew((((readw(olympic_mmio+TXENQ_1)) & 0x8000) ^ 0x8000) | 1,olympic_mmio+TXENQ_1);
+
+ dev->tbusy=0;
+
+ return 0;
+ } else
+ return 1;
+
+}
+
+
+static int olympic_close(struct device *dev)
+{
+ struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+ __u8 *olympic_mmio=olympic_priv->olympic_mmio,*srb;
+ unsigned long flags;
+ int i;
+
+ writel(olympic_priv->srb,olympic_mmio+LAPA);
+ srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800));
+
+ writeb(SRB_CLOSE_ADAPTER,srb+0);
+ writeb(0,srb+1);
+ writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
+
+ save_flags(flags);
+ cli();
+
+ olympic_priv->srb_queued=1;
+
+ writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+
+ while(olympic_priv->srb_queued) {
+ interruptible_sleep_on_timeout(&olympic_priv->srb_wait, jiffies+60*HZ);
+ if(signal_pending(current)) {
+ printk(KERN_WARNING "%s: SRB timed out.\n",
+ dev->name);
+ printk(KERN_WARNING "SISR=%x MISR=%x\n",
+ readl(olympic_mmio+SISR),
+ readl(olympic_mmio+LISR));
+ olympic_priv->srb_queued=0;
+ break;
+ }
+ }
+
+ restore_flags(flags) ;
+ olympic_priv->rx_status_last_received++;
+ olympic_priv->rx_status_last_received&=OLYMPIC_RX_RING_SIZE-1;
+
+ for(i=0;i<OLYMPIC_RX_RING_SIZE;i++) {
+ dev_kfree_skb(olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received]);
+ olympic_priv->rx_status_last_received++;
+ olympic_priv->rx_status_last_received&=OLYMPIC_RX_RING_SIZE-1;
+ }
+
+ /* reset tx/rx fifo's and busmaster logic */
+
+ writel(readl(olympic_mmio+BCTL)|(3<<13),olympic_mmio+BCTL);
+ udelay(1);
+ writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL);
+
+#if OLYMPIC_DEBUG
+ printk("srb(%p): ",srb);
+ for(i=0;i<4;i++)
+ printk("%x ",readb(srb+i));
+ printk("\n");
+#endif
+ dev->start = 0;
+ free_irq(dev->irq,dev);
+
+ MOD_DEC_USE_COUNT ;
+ return 0;
+
+}
+
+static void olympic_set_rx_mode(struct device *dev)
+{
+ struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv ;
+ __u8 *olympic_mmio = olympic_priv->olympic_mmio ;
+ __u8 options = 0, set_mc_list = 0 ;
+ __u8 *srb, *ata ;
+ struct dev_mc_list *dmi ;
+
+ writel(olympic_priv->srb,olympic_mmio+LAPA);
+ srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800));
+ options = olympic_priv->olympic_copy_all_options;
+
+ if (dev->flags&IFF_PROMISC)
+ options |= (3<<5) ; /* All LLC and MAC frames, all through the main rx channel */
+ else
+ options &= ~(3<<5) ;
+
+ if (dev->mc_count) {
+ set_mc_list = 1 ;
+ }
+
+ /* Only issue the srb if there is a change in options */
+
+ if ((options ^ olympic_priv->olympic_copy_all_options)) {
+
+ /* Now to issue the srb command to alter the copy.all.options */
+
+ writeb(SRB_MODIFY_RECEIVE_OPTIONS,srb);
+ writeb(0,srb+1);
+ writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
+ writeb(0,srb+3);
+ writeb(olympic_priv->olympic_receive_options,srb+4);
+ writeb(options,srb+5);
+
+ olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */
+
+ writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+
+ olympic_priv->olympic_copy_all_options = options ;
+
+ return ;
+ }
+
+ if (set_mc_list ^ olympic_priv->olympic_multicast_set) { /* Multicast options have changed */
+
+ dmi = dev->mc_list ;
+
+ if (set_mc_list) { /* Turn multicast on */
+
+ /* RFC 1469 Says we must support using the functional address C0 00 00 04 00 00
+ * We do this with a set functional address mask.
+ */
+
+ ata=olympic_priv->olympic_lap + (olympic_priv->olympic_addr_table_addr) ;
+ if (!(readb(ata+11) & 0x04)) { /* Hmmm, need to set the functional mask */
+ writeb(SRB_SET_FUNC_ADDRESS,srb+0);
+ writeb(0,srb+1);
+ writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
+ writeb(0,srb+3);
+ writeb(0,srb+4);
+ writeb(0,srb+5);
+ writeb(readb(ata+10),srb+6);
+ writeb(readb(ata+11)|4,srb+7);
+ writeb(readb(ata+12),srb+8);
+ writeb(readb(ata+13),srb+9);
+
+ olympic_priv->srb_queued = 2 ;
+ writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+
+ olympic_priv->olympic_multicast_set = 1 ;
+ }
+
+
+ } else { /* Turn multicast off */
+
+ ata=olympic_priv->olympic_lap + (olympic_priv->olympic_addr_table_addr) ;
+ if ((readb(ata+11) & 0x04)) { /* Hmmm, need to reset the functional mask */
+ writeb(SRB_SET_FUNC_ADDRESS,srb+0);
+ writeb(0,srb+1);
+ writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
+ writeb(0,srb+3);
+ writeb(0,srb+4);
+ writeb(0,srb+5);
+ writeb(readb(ata+10),srb+6);
+ writeb(readb(ata+11) & ~4,srb+7);
+ writeb(readb(ata+12),srb+8);
+ writeb(readb(ata+13),srb+9);
+
+ olympic_priv->srb_queued = 2 ;
+ writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+
+ olympic_priv->olympic_multicast_set = 0 ;
+ }
+ }
+
+ }
+
+
+}
+
+static void olympic_srb_bh(struct device *dev)
+{
+ struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv ;
+ __u8 *olympic_mmio = olympic_priv->olympic_mmio ;
+ __u8 *srb;
+
+ writel(olympic_priv->srb,olympic_mmio+LAPA);
+ srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800));
+
+ switch (readb(srb)) {
+
+ /* SRB_MODIFY_RECEIVE_OPTIONS i.e. set_multicast_list options (promiscuous)
+ * At some point we should do something if we get an error, such as
+ * resetting the IFF_PROMISC flag in dev
+ */
+
+ case SRB_MODIFY_RECEIVE_OPTIONS:
+ switch (readb(srb+2)) {
+ case 0x01:
+ printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name) ;
+ break ;
+ case 0x04:
+ printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name);
+ break ;
+ default:
+ if (olympic_priv->olympic_message_level)
+ printk(KERN_WARNING "%s: Receive Options Modified to %x,%x\n",dev->name,olympic_priv->olympic_copy_all_options, olympic_priv->olympic_receive_options) ;
+ break ;
+ } /* switch srb[2] */
+ break ;
+
+ /* SRB_SET_GROUP_ADDRESS - Multicast group setting
+ */
+
+ case SRB_SET_GROUP_ADDRESS:
+ switch (readb(srb+2)) {
+ case 0x00:
+ olympic_priv->olympic_multicast_set = 1 ;
+ break ;
+ case 0x01:
+ printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ;
+ break ;
+ case 0x04:
+ printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name);
+ break ;
+ case 0x3c:
+ printk(KERN_WARNING "%s: Group/Functional address indicator bits not set correctly\n",dev->name) ;
+ break ;
+ case 0x3e: /* If we ever implement individual multicast addresses, will need to deal with this */
+ printk(KERN_WARNING "%s: Group address registers full\n",dev->name) ;
+ break ;
+ case 0x55:
+ printk(KERN_INFO "%s: Group Address already set.\n",dev->name) ;
+ break ;
+ default:
+ break ;
+ } /* switch srb[2] */
+ break ;
+
+ /* SRB_RESET_GROUP_ADDRESS - Remove a multicast address from group list
+ */
+
+ case SRB_RESET_GROUP_ADDRESS:
+ switch (readb(srb+2)) {
+ case 0x00:
+ olympic_priv->olympic_multicast_set = 0 ;
+ break ;
+ case 0x01:
+ printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ;
+ break ;
+ case 0x04:
+ printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ;
+ break ;
+ case 0x39: /* Must deal with this if individual multicast addresses used */
+ printk(KERN_INFO "%s: Group address not found \n",dev->name);
+ break ;
+ default:
+ break ;
+ } /* switch srb[2] */
+ break ;
+
+
+ /* SRB_SET_FUNC_ADDRESS - Called by the set_rx_mode
+ */
+
+ case SRB_SET_FUNC_ADDRESS:
+ switch (readb(srb+2)) {
+ case 0x00:
+ if (olympic_priv->olympic_message_level)
+ printk(KERN_INFO "%s: Functional Address Mask Set \n",dev->name) ;
+ break ;
+ case 0x01:
+ printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ;
+ break ;
+ case 0x04:
+ printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ;
+ break ;
+ default:
+ break ;
+ } /* switch srb[2] */
+ break ;
+
+ /* SRB_READ_LOG - Read and reset the adapter error counters
+ */
+
+ case SRB_READ_LOG:
+ switch (readb(srb+2)) {
+ case 0x00:
+ if (olympic_priv->olympic_message_level)
+ printk(KERN_INFO "%s: Read Log issued\n",dev->name) ;
+ break ;
+ case 0x01:
+ printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ;
+ break ;
+ case 0x04:
+ printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ;
+ break ;
+
+ } /* switch srb[2] */
+ break ;
+
+ /* SRB_READ_SR_COUNTERS - Read and reset the source routing bridge related counters */
+
+ case SRB_READ_SR_COUNTERS:
+ switch (readb(srb+2)) {
+ case 0x00:
+ if (olympic_priv->olympic_message_level)
+ printk(KERN_INFO "%s: Read Source Routing Counters issued\n",dev->name) ;
+ break ;
+ case 0x01:
+ printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ;
+ break ;
+ case 0x04:
+ printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ;
+ break ;
+ default:
+ break ;
+ } /* switch srb[2] */
+ break ;
+
+ default:
+ printk(KERN_WARNING "%s: Unrecognized srb bh return value.\n",dev->name);
+ break ;
+ } /* switch srb[0] */
+
+}
+
+static struct net_device_stats * olympic_get_stats(struct device *dev)
+{
+ struct olympic_private *olympic_priv ;
+ olympic_priv=(struct olympic_private *) dev->priv;
+ return (struct net_device_stats *) &olympic_priv->olympic_stats;
+}
+
+static int olympic_set_mac_address (struct device *dev, void *addr)
+{
+ struct sockaddr *saddr = addr ;
+ struct olympic_private *olympic_priv = (struct olympic_private *)dev->priv ;
+
+ if (dev->start) {
+ printk(KERN_WARNING "%s: Cannot set mac/laa address while card is open\n", dev->name) ;
+ return -EIO ;
+ }
+
+ memcpy(olympic_priv->olympic_laa, saddr->sa_data,dev->addr_len) ;
+
+ if (olympic_priv->olympic_message_level) {
+ printk(KERN_INFO "%s: MAC/LAA Set to = %x.%x.%x.%x.%x.%x\n",dev->name, olympic_priv->olympic_laa[0],
+ olympic_priv->olympic_laa[1], olympic_priv->olympic_laa[2],
+ olympic_priv->olympic_laa[3], olympic_priv->olympic_laa[4],
+ olympic_priv->olympic_laa[5]);
+ }
+
+ return 0 ;
+}
+
+static void olympic_arb_cmd(struct device *dev)
+{
+ struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv;
+ __u8 *olympic_mmio=olympic_priv->olympic_mmio;
+ __u8 *arb_block, *asb_block, *srb ;
+ __u8 header_len ;
+ __u16 frame_len, buffer_len ;
+ struct sk_buff *mac_frame ;
+ __u8 *buf_ptr ;
+ __u8 *frame_data ;
+ __u16 buff_off ;
+ __u16 lan_status = 0, lan_status_diff ; /* Initialize to stop compiler warning */
+ __u8 fdx_prot_error ;
+ __u16 next_ptr;
+
+#if OLYMPIC_NETWORK_MONITOR
+ struct trh_hdr *mac_hdr ;
+#endif
+
+ arb_block = (__u8 *)(olympic_priv->olympic_lap + olympic_priv->arb) ;
+ asb_block = (__u8 *)(olympic_priv->olympic_lap + olympic_priv->asb) ;
+ srb = (__u8 *)(olympic_priv->olympic_lap + olympic_priv->srb) ;
+ writel(readl(olympic_mmio+LAPA),olympic_mmio+LAPWWO);
+
+ if (readb(arb_block+0) == ARB_RECEIVE_DATA) { /* Receive.data, MAC frames */
+
+ header_len = readb(arb_block+8) ; /* 802.5 Token-Ring Header Length */
+ frame_len = ntohs(readw(arb_block + 10)) ;
+
+ buff_off = ntohs(readw(arb_block + 6)) ;
+
+ buf_ptr = olympic_priv->olympic_lap + buff_off ;
+
+#if OLYMPIC_DEBUG
+{
+ int i;
+ frame_data = buf_ptr+offsetof(struct mac_receive_buffer,frame_data) ;
+
+ for (i=0 ; i < 14 ; i++) {
+ printk("Loc %d = %02x\n",i,readb(frame_data + i));
+ }
+
+ printk("next %04x, fs %02x, len %04x \n",readw(buf_ptr+offsetof(struct mac_receive_buffer,next)), readb(buf_ptr+offsetof(struct mac_receive_buffer,frame_status)), readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length)));
+}
+#endif
+ mac_frame = dev_alloc_skb(frame_len) ;
+
+ /* Walk the buffer chain, creating the frame */
+
+ do {
+ frame_data = buf_ptr+offsetof(struct mac_receive_buffer,frame_data) ;
+ buffer_len = ntohs(readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length)));
+ memcpy_fromio(skb_put(mac_frame, buffer_len), frame_data , buffer_len ) ;
+ next_ptr=readw(buf_ptr+offsetof(struct mac_receive_buffer,next));
+
+ } while (next_ptr && (buf_ptr=olympic_priv->olympic_lap + ntohs(next_ptr)));
+
+#if OLYMPIC_NETWORK_MONITOR
+ printk(KERN_WARNING "%s: Received MAC Frame, details: \n",dev->name) ;
+ mac_hdr = (struct trh_hdr *)mac_frame->data ;
+ printk(KERN_WARNING "%s: MAC Frame Dest. Addr: %02x:%02x:%02x:%02x:%02x:%02x \n", dev->name , mac_hdr->daddr[0], mac_hdr->daddr[1], mac_hdr->daddr[2], mac_hdr->daddr[3], mac_hdr->daddr[4], mac_hdr->daddr[5]) ;
+ printk(KERN_WARNING "%s: MAC Frame Srce. Addr: %02x:%02x:%02x:%02x:%02x:%02x \n", dev->name , mac_hdr->saddr[0], mac_hdr->saddr[1], mac_hdr->saddr[2], mac_hdr->saddr[3], mac_hdr->saddr[4], mac_hdr->saddr[5]) ;
+#endif
+ mac_frame->dev = dev ;
+ mac_frame->protocol = tr_type_trans(mac_frame,dev);
+ netif_rx(mac_frame) ;
+
+ /* Now tell the card we have dealt with the received frame */
+
+ /* Set LISR Bit 1 */
+ writel(LISR_ARB_FREE,olympic_priv->olympic_lap + LISR_SUM);
+
+ /* Is the ASB free ? */
+
+ if (!(readl(olympic_priv->olympic_mmio + SISR) & SISR_ASB_FREE)) {
+ olympic_priv->asb_queued = 1 ;
+ writel(LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM);
+ return ;
+ /* Drop out and wait for the bottom half to be run */
+ }
+
+ writeb(ASB_RECEIVE_DATA,asb_block); /* Receive data */
+ writeb(OLYMPIC_CLEAR_RET_CODE,asb_block+2); /* Necessary ?? */
+ writeb(readb(arb_block+6),asb_block+6); /* Must send the address back to the adapter */
+ writeb(readb(arb_block+7),asb_block+7); /* To let it know we have dealt with the data */
+
+ writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM);
+
+ olympic_priv->asb_queued = 2 ;
+
+ return ;
+
+ } else if (readb(arb_block) == ARB_LAN_CHANGE_STATUS) { /* Lan.change.status */
+ lan_status = readw(arb_block+6);
+ fdx_prot_error = readb(arb_block+8) ;
+
+ /* Issue ARB Free */
+ writel(LISR_ARB_FREE,olympic_priv->olympic_mmio+LISR_SUM);
+
+ lan_status_diff = olympic_priv->olympic_lan_status ^ lan_status ;
+
+ if (lan_status_diff & (LSC_LWF | LSC_ARW | LSC_FPE | LSC_RR) ) {
+ if (lan_status_diff & LSC_LWF)
+ printk(KERN_WARNING "%s: Short circuit detected on the lobe\n",dev->name);
+ if (lan_status_diff & LSC_ARW)
+ printk(KERN_WARNING "%s: Auto removal error\n",dev->name);
+ if (lan_status_diff & LSC_FPE)
+ printk(KERN_WARNING "%s: FDX Protocol Error\n",dev->name);
+ if (lan_status_diff & LSC_RR)
+ printk(KERN_WARNING "%s: Force remove MAC frame received\n",dev->name);
+
+ /* Adapter has been closed by the hardware */
+
+ /* reset tx/rx fifo's and busmaster logic */
+
+ writel(readl(olympic_mmio+BCTL)|(3<<13),olympic_mmio+BCTL);
+ udelay(1);
+ writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL);
+ dev->tbusy = 1 ;
+ dev->interrupt = 1 ;
+ dev->start = 0 ;
+ olympic_priv->srb = readw(olympic_priv->olympic_lap + LAPWWO) ;
+ free_irq(dev->irq,dev);
+
+ printk(KERN_WARNING "%s: Adapter has been closed \n", dev->name) ;
+
+ } /* If serious error */
+
+ if (olympic_priv->olympic_message_level) {
+ if (lan_status_diff & LSC_SIG_LOSS)
+ printk(KERN_WARNING "%s: No receive signal detected \n", dev->name) ;
+ if (lan_status_diff & LSC_HARD_ERR)
+ printk(KERN_INFO "%s: Beaconing \n",dev->name);
+ if (lan_status_diff & LSC_SOFT_ERR)
+ printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame \n",dev->name);
+ if (lan_status_diff & LSC_TRAN_BCN)
+ printk(KERN_INFO "%s: We are tranmitting the beacon, aaah\n",dev->name);
+ if (lan_status_diff & LSC_SS)
+ printk(KERN_INFO "%s: Single Station on the ring \n", dev->name);
+ if (lan_status_diff & LSC_RING_REC)
+ printk(KERN_INFO "%s: Ring recovery ongoing\n",dev->name);
+ if (lan_status_diff & LSC_FDX_MODE)
+ printk(KERN_INFO "%s: Operating in FDX mode\n",dev->name);
+ }
+
+ if (lan_status_diff & LSC_CO) {
+
+ if (olympic_priv->olympic_message_level)
+ printk(KERN_INFO "%s: Counter Overflow \n", dev->name);
+
+ /* Issue READ.LOG command */
+
+ writeb(SRB_READ_LOG, srb);
+ writeb(0,srb+1);
+ writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
+ writeb(0,srb+3);
+ writeb(0,srb+4);
+ writeb(0,srb+5);
+
+ olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */
+
+ writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+
+ }
+
+ if (lan_status_diff & LSC_SR_CO) {
+
+ if (olympic_priv->olympic_message_level)
+ printk(KERN_INFO "%s: Source routing counters overflow\n", dev->name);
+
+ /* Issue a READ.SR.COUNTERS */
+
+ writeb(SRB_READ_SR_COUNTERS,srb);
+ writeb(0,srb+1);
+ writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
+ writeb(0,srb+3);
+
+ olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */
+
+ writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+
+ }
+
+ olympic_priv->olympic_lan_status = lan_status ;
+
+ } /* Lan.change.status */
+ else
+ printk(KERN_WARNING "%s: Unknown arb command \n", dev->name);
+}
+
+static void olympic_asb_bh(struct device *dev)
+{
+ struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv ;
+ __u8 *arb_block, *asb_block ;
+
+ arb_block = (__u8 *)(olympic_priv->olympic_lap + olympic_priv->arb) ;
+ asb_block = (__u8 *)(olympic_priv->olympic_lap + olympic_priv->asb) ;
+
+ if (olympic_priv->asb_queued == 1) { /* Dropped through the first time */
+
+ writeb(ASB_RECEIVE_DATA,asb_block); /* Receive data */
+ writeb(OLYMPIC_CLEAR_RET_CODE,asb_block+2); /* Necessary ?? */
+ writeb(readb(arb_block+6),asb_block+6); /* Must send the address back to the adapter */
+ writeb(readb(arb_block+7),asb_block+7); /* To let it know we have dealt with the data */
+
+ writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM);
+ olympic_priv->asb_queued = 2 ;
+
+ return ;
+ }
+
+ if (olympic_priv->asb_queued == 2) {
+ switch (readb(asb_block+2)) {
+ case 0x01:
+ printk(KERN_WARNING "%s: Unrecognized command code \n", dev->name);
+ break ;
+ case 0x26:
+ printk(KERN_WARNING "%s: Unrecognized buffer address \n", dev->name);
+ break ;
+ case 0xFF:
+ /* Valid response, everything should be ok again */
+ break ;
+ default:
+ printk(KERN_WARNING "%s: Invalid return code in asb\n",dev->name);
+ break ;
+ }
+ }
+ olympic_priv->asb_queued = 0 ;
+}
+
+static int olympic_change_mtu(struct device *dev, int mtu)
+{
+ struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv;
+ __u16 max_mtu ;
+
+ if (olympic_priv->olympic_ring_speed == 4)
+ max_mtu = 4500 ;
+ else
+ max_mtu = 18000 ;
+
+ if (mtu > max_mtu)
+ return -EINVAL ;
+ if (mtu < 100)
+ return -EINVAL ;
+
+ dev->mtu = mtu ;
+ olympic_priv->pkt_buf_sz = mtu + TR_HLEN ;
+
+ return 0 ;
+}
+
+#if OLYMPIC_NETWORK_MONITOR
+#ifdef CONFIG_PROC_FS
+static int olympic_proc_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data)
+{
+ struct pci_dev *pci_device = NULL ;
+ int len=0;
+ off_t begin=0;
+ off_t pos=0;
+ int size;
+
+ struct device *dev;
+
+
+ size = sprintf(buffer,
+ "IBM Pit/Pit-Phy/Olympic Chipset Token Ring Adapters\n");
+
+ pos+=size;
+ len+=size;
+
+
+ while((pci_device=pci_find_device(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_TR_WAKE, pci_device))) {
+
+ for (dev = dev_base; dev != NULL; dev = dev->next)
+ {
+ if (dev->base_addr == (pci_device->base_address[0] & (~3)) ) { /* Yep, an Olympic device */
+ size = sprintf_info(buffer+len, dev);
+ len+=size;
+ pos=begin+len;
+
+ if(pos<offset)
+ {
+ len=0;
+ begin=pos;
+ }
+ if(pos>offset+length)
+ break;
+ } /* if */
+ } /* for */
+ } /* While */
+
+ *start=buffer+(offset-begin); /* Start of wanted data */
+ len-=(offset-begin); /* Start slop */
+ if(len>length)
+ len=length; /* Ending slop */
+ return len;
+}
+
+static int sprintf_info(char *buffer, struct device *dev)
+{
+ struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+ __u8 *oat = (__u8 *)(olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr) ;
+ __u8 *opt = (__u8 *)(olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr) ;
+ int size = 0 ;
+
+ size = sprintf(buffer, "\n%6s: Adapter Address : Node Address : Functional Addr\n",
+ dev->name);
+
+ size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x\n",
+ dev->name,
+ dev->dev_addr[0],
+ dev->dev_addr[1],
+ dev->dev_addr[2],
+ dev->dev_addr[3],
+ dev->dev_addr[4],
+ dev->dev_addr[5],
+ readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)),
+ readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+1),
+ readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+2),
+ readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+3),
+ readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+4),
+ readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+5),
+ readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)),
+ readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+1),
+ readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2),
+ readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3));
+
+ size += sprintf(buffer+size, "\n%6s: Token Ring Parameters Table:\n", dev->name);
+
+ size += sprintf(buffer+size, "%6s: Physical Addr : Up Node Address : Poll Address : AccPri : Auth Src : Att Code :\n",
+ dev->name) ;
+
+ size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x:%02x:%02x : %04x : %04x : %04x :\n",
+ dev->name,
+ readb(opt+offsetof(struct olympic_parameters_table, phys_addr)),
+ readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+1),
+ readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+2),
+ readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+3),
+ readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)),
+ readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+1),
+ readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+2),
+ readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+3),
+ readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+4),
+ readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+5),
+ readb(opt+offsetof(struct olympic_parameters_table, poll_addr)),
+ readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+1),
+ readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+2),
+ readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+3),
+ readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+4),
+ readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+5),
+ ntohs(readw(opt+offsetof(struct olympic_parameters_table, acc_priority))),
+ ntohs(readw(opt+offsetof(struct olympic_parameters_table, auth_source_class))),
+ ntohs(readw(opt+offsetof(struct olympic_parameters_table, att_code))));
+
+ size += sprintf(buffer+size, "%6s: Source Address : Bcn T : Maj. V : Lan St : Lcl Rg : Mon Err : Frame Correl : \n",
+ dev->name) ;
+
+ size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x:%02x:%02x : %04x : %04x : %04x : %04x : %04x : %04x : \n",
+ dev->name,
+ readb(opt+offsetof(struct olympic_parameters_table, source_addr)),
+ readb(opt+offsetof(struct olympic_parameters_table, source_addr)+1),
+ readb(opt+offsetof(struct olympic_parameters_table, source_addr)+2),
+ readb(opt+offsetof(struct olympic_parameters_table, source_addr)+3),
+ readb(opt+offsetof(struct olympic_parameters_table, source_addr)+4),
+ readb(opt+offsetof(struct olympic_parameters_table, source_addr)+5),
+ ntohs(readw(opt+offsetof(struct olympic_parameters_table, beacon_type))),
+ ntohs(readw(opt+offsetof(struct olympic_parameters_table, major_vector))),
+ ntohs(readw(opt+offsetof(struct olympic_parameters_table, lan_status))),
+ ntohs(readw(opt+offsetof(struct olympic_parameters_table, local_ring))),
+ ntohs(readw(opt+offsetof(struct olympic_parameters_table, mon_error))),
+ ntohs(readw(opt+offsetof(struct olympic_parameters_table, frame_correl))));
+
+ size += sprintf(buffer+size, "%6s: Beacon Details : Tx : Rx : NAUN Node Address : NAUN Node Phys : \n",
+ dev->name) ;
+
+ size += sprintf(buffer+size, "%6s: : %02x : %02x : %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x : \n",
+ dev->name,
+ ntohs(readw(opt+offsetof(struct olympic_parameters_table, beacon_transmit))),
+ ntohs(readw(opt+offsetof(struct olympic_parameters_table, beacon_receive))),
+ readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)),
+ readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+1),
+ readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+2),
+ readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+3),
+ readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+4),
+ readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+5),
+ readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)),
+ readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+1),
+ readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+2),
+ readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+3));
+
+
+ return size;
+}
+#endif
+#endif
+
+#ifdef MODULE
+
+static struct device* dev_olympic[OLYMPIC_MAX_ADAPTERS];
+
+int init_module(void)
+{
+ int i;
+
+#if OLYMPIC_NETWORK_MONITOR
+#ifdef CONFIG_PROC_FS
+ struct proc_dir_entry *ent ;
+
+ ent = create_proc_entry("net/olympic_tr",0,0);
+ ent->read_proc = &olympic_proc_info ;
+#endif
+#endif
+ for (i = 0; (i<OLYMPIC_MAX_ADAPTERS); i++) {
+ dev_olympic[i] = NULL;
+ dev_olympic[i] = init_trdev(dev_olympic[i], 0);
+ if (dev_olympic[i] == NULL)
+ return -ENOMEM;
+
+ dev_olympic[i]->init = &olympic_probe;
+
+ if (register_trdev(dev_olympic[i]) != 0) {
+ kfree_s(dev_olympic[i], sizeof(struct device));
+ dev_olympic[i] = NULL;
+ if (i == 0) {
+ printk("Olympic: No IBM PCI Token Ring cards found in system.\n");
+ return -EIO;
+ } else {
+ printk("Olympic: %d IBM PCI Token Ring card(s) found in system.\n",i) ;
+ return 0;
+ }
+ }
+ }
+
+ return 0;
+}
+
+void cleanup_module(void)
+{
+ int i;
+
+ for (i = 0; i < OLYMPIC_MAX_ADAPTERS; i++)
+ if (dev_olympic[i]) {
+ unregister_trdev(dev_olympic[i]);
+ release_region(dev_olympic[i]->base_addr, OLYMPIC_IO_SPACE);
+ kfree_s(dev_olympic[i]->priv, sizeof(struct olympic_private));
+ kfree_s(dev_olympic[i], sizeof(struct device));
+ dev_olympic[i] = NULL;
+ }
+
+#if OLYMPIC_NETWORK_MONITOR
+#ifdef CONFIG_PROC_FS
+ remove_proc_entry("net/olympic_tr", NULL) ;
+#endif
+#endif
+}
+#endif /* MODULE */
+
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)