patch-2.2.11 linux/drivers/net/Config.in

• Lines: 217
• Date: Mon Aug 9 12:05:13 1999
• Orig file: v2.2.10/linux/drivers/net/Config.in
• Orig date: Mon Jun 7 14:35:22 1999

diff -u --recursive --new-file v2.2.10/linux/drivers/net/Config.in linux/drivers/net/Config.in
@@ -2,6 +2,9 @@
 # Network device configuration
 #
 
+mainmenu_option next_comment
+comment 'ARCnet devices'
+
 tristate 'ARCnet support' CONFIG_ARCNET
 if [ "$CONFIG_ARCNET" != "n" ]; then
   bool '  Enable arc0e (ARCnet "Ether-Encap" packet format)' CONFIG_ARCNET_ETH
@@ -12,6 +15,8 @@
   dep_tristate '  ARCnet COM20020 chipset driver' CONFIG_ARCNET_COM20020 $CONFIG_ARCNET
 fi
 
+endmenu
+
 tristate 'Dummy net driver support' CONFIG_DUMMY
 tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER
 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
@@ -19,9 +24,16 @@
      tristate 'Ethertap network tap' CONFIG_ETHERTAP
   fi
 fi
+
+tristate 'General Instruments Surfboard 1000' CONFIG_NET_SB1000
+
 #
 #	Ethernet
 #
+
+mainmenu_option next_comment
+comment 'Ethernet (10 or 100Mbit)'
+
 bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET
 if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
   if [ "$CONFIG_ARM" = "y" ]; then
@@ -42,7 +54,7 @@
     tristate 'Hydra support' CONFIG_HYDRA
   fi
   if [ "$CONFIG_MIPS_JAZZ" = "y" ]; then
-    bool 'MIPS JAZZ onboard SONIC Ethernet support' CONFIG_MIPS_JAZZ_SONIC
+    tristate 'MIPS JAZZ onboard SONIC Ethernet support' CONFIG_MIPS_JAZZ_SONIC
   fi
   bool '3COM cards' CONFIG_NET_VENDOR_3COM
   if [ "$CONFIG_NET_VENDOR_3COM" = "y" ]; then
@@ -81,19 +93,17 @@
   fi
   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
       tristate 'RealTek 8129/8139 (not 8019/8029!) support' CONFIG_RTL8139
+      tristate 'SiS 900 PCI Fast Ethernet Adapter support' CONFIG_SIS900
       tristate 'Packet Engines Yellowfin Gigabit-NIC support' CONFIG_YELLOWFIN
-      tristate 'Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support' CONFIG_ACENIC
   fi
   bool 'Other ISA cards' CONFIG_NET_ISA
   if [ "$CONFIG_NET_ISA" = "y" ]; then
-    tristate 'AT1700/1720 support' CONFIG_AT1700
+    tristate 'AT1700/1720 support (EXPERIMENTAL)' CONFIG_AT1700
     tristate 'Cabletron E21xx support' CONFIG_E2100
     tristate 'DEPCA, DE10x, DE200, DE201, DE202, DE422 support' CONFIG_DEPCA
     tristate 'EtherWORKS 3 (DE203, DE204, DE205) support' CONFIG_EWRK3
     tristate 'EtherExpress 16 support' CONFIG_EEXPRESS
-    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-      tristate 'EtherExpressPro support' CONFIG_EEXPRESS_PRO
-    fi
+    tristate 'EtherExpressPro support' CONFIG_EEXPRESS_PRO
     tristate 'FMV-181/182/183/184 support' CONFIG_FMV18X
     tristate 'HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS
     tristate 'HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN
@@ -103,7 +113,7 @@
     fi
     tristate 'NE2000/NE1000 support' CONFIG_NE2000
     if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-      bool 'SEEQ8005 support (EXPERIMENTAL)' CONFIG_SEEQ8005
+      tristate 'SEEQ8005 support (EXPERIMENTAL)' CONFIG_SEEQ8005
     fi
     bool 'SK_G16 support' CONFIG_SK_G16
   fi
@@ -115,6 +125,7 @@
   if [ "$CONFIG_NET_EISA" = "y" ]; then
     tristate 'AMD PCnet32 (VLB and PCI) support' CONFIG_PCNET32
     if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+      tristate 'Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support' CONFIG_ACENIC
       tristate 'Ansel Communications EISA 3200 support (EXPERIMENTAL)' CONFIG_AC3200
     fi
 
@@ -145,6 +156,8 @@
   fi
 fi
 
+endmenu
+
 bool 'FDDI driver support' CONFIG_FDDI
 if [ "$CONFIG_FDDI" = "y" ]; then
   bool 'Digital DEFEA and DEFPA adapter support' CONFIG_DEFXX
@@ -153,25 +166,20 @@
 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   bool 'HIPPI driver support (EXPERIMENTAL)' CONFIG_HIPPI
   if [ "$CONFIG_HIPPI" = "y" ]; then
-    bool 'CERN HIPPI PCI adapter support' CONFIG_CERN_HIPPI
-    bool 'Essential RoadRunner HIPPI PCI adapter support' CONFIG_ROADRUNNER
+    tristate 'Essential RoadRunner HIPPI PCI adapter support' CONFIG_ROADRUNNER
     if [ "$CONFIG_ROADRUNNER" != "n" ]; then
       bool '  Use large TX/RX rings' CONFIG_ROADRUNNER_LARGE_RINGS
     fi
   fi
 fi
 
-tristate 'Frame relay DLCI support' CONFIG_DLCI
-if [ "$CONFIG_DLCI" = "y" -o "$CONFIG_DLCI" = "m" ]; then
-  int '  Max open DLCI' CONFIG_DLCI_COUNT 24
-  int '  Max DLCI per device' CONFIG_DLCI_MAX 8
-  dep_tristate '  SDLA (Sangoma S502/S508) support' CONFIG_SDLA $CONFIG_DLCI
-fi
-
 #
 # AppleTalk
 #
+
 if [ "$CONFIG_ATALK" != "n" ]; then
+  mainmenu_option next_comment
+  comment 'Appletalk devices'
   dep_tristate 'Apple/Farallon LocalTalk PC support' CONFIG_LTPC $CONFIG_ATALK
   dep_tristate 'COPS LocalTalk PC support' CONFIG_COPS $CONFIG_ATALK
   if [ "$CONFIG_COPS" != "n" ]; then
@@ -183,6 +191,7 @@
      bool 'IP to Appletalk-IP Encapsulation support' CONFIG_IPDDP_ENCAP
      bool 'Appletalk-IP to IP Decapsulation support' CONFIG_IPDDP_DECAP
   fi
+  endmenu
 fi
 
 if [ ! "$CONFIG_PARPORT" = "n" ]; then
@@ -203,23 +212,38 @@
 
 bool 'Wireless LAN (non-hamradio)' CONFIG_NET_RADIO
 if [ "$CONFIG_NET_RADIO" = "y" ]; then
-  tristate 'STRIP (Metricom starmode radio IP)' CONFIG_STRIP
+  dep_tristate 'STRIP (Metricom starmode radio IP)' CONFIG_STRIP $CONFIG_INET
   tristate 'AT&T WaveLAN & DEC RoamAbout DS support' CONFIG_WAVELAN
+  tristate 'Aironet Arlan 655 & IC2200 DS support' CONFIG_ARLAN
+
 fi
 
+mainmenu_option next_comment
+comment 'Token ring devices'
+
 bool 'Token Ring driver support' CONFIG_TR
 if [ "$CONFIG_TR" = "y" ]; then
   tristate 'IBM Tropic chipset based adaptor support' CONFIG_IBMTR
 #  tristate 'IBM Lanstreamer PCI adaptor support' CONFIG_IBMLS
+  tristate 'IBM Olympic chipset PCI adapter support' CONFIG_IBMOL
   tristate 'SysKonnect adapter support' CONFIG_SKTR
 fi
 
+endmenu
+
 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+  tristate 'Red Creek Hardware VPN (EXPERIMENTAL)' CONFIG_RCPCI
   tristate 'Traffic Shaper (EXPERIMENTAL)' CONFIG_SHAPER
 fi
+
 #
 # WAN drivers support
 #
+
+mainmenu_option next_comment
+comment 'Wan interfaces'
+
+
 # There is no way to detect a comtrol sv11 - force it modular for now.
 #
 dep_tristate 'Comtrol Hostess SV-11 support' CONFIG_HOSTESS_SV11 m
@@ -227,8 +251,22 @@
 # The COSA/SRP driver has not been tested as non-modular yet.
 #
 dep_tristate 'COSA/SRP sync serial boards support' CONFIG_COSA m
-tristate 'Red Creek Hardware VPN (EXPERIMENTAL)' CONFIG_RCPCI
 #
+# There is no way to detect a Sealevel board. Force it modular
+#
+dep_tristate 'Sealevel Systems 4021 support' CONFIG_SEALEVEL_4021 m
+
+tristate 'Frame relay DLCI support' CONFIG_DLCI
+if [ "$CONFIG_DLCI" != "n" ]; then
+  int '  Max open DLCI' CONFIG_DLCI_COUNT 24
+  int '  Max DLCI per device' CONFIG_DLCI_MAX 8
+  dep_tristate '  SDLA (Sangoma S502/S508) support' CONFIG_SDLA $CONFIG_DLCI
+fi
+
+#
+#	Wan router core.
+#
+
 if [ "$CONFIG_WAN_ROUTER" != "n" ]; then
   bool 'WAN drivers' CONFIG_WAN_DRIVERS
   if [ "$CONFIG_WAN_DRIVERS" = "y" ]; then
@@ -238,14 +276,19 @@
       bool '  WANPIPE X.25 support' CONFIG_WANPIPE_X25
       bool '  WANPIPE Frame Relay support' CONFIG_WANPIPE_FR
       bool '  WANPIPE PPP support' CONFIG_WANPIPE_PPP
+  #    bool '  WANPIPE Cisco HDLC support' CONFIG_WANPIPE_CHDLC
     fi
   fi
 fi
+
+endmenu
+
+
 #
 # X.25 network drivers
 #
 if [ "$CONFIG_X25" != "n" ]; then
-if [ "$CONFIG_LAPB" != "n" ]; then
+if [ "$CONFIG_LAPB" = "y" -o "$CONFIG_LAPB" = "m" ]; then
     dep_tristate 'LAPB over Ethernet driver' CONFIG_LAPBETHER $CONFIG_LAPB
     dep_tristate 'X.25 async driver' CONFIG_X25_ASY $CONFIG_LAPB
 fi