patch-2.2.10 linux/drivers/char/synclink.c
Next file: linux/drivers/char/tuner.c
Previous file: linux/drivers/char/softdog.c
Back to the patch index
Back to the overall index
- Lines: 907
- Date:
Fri Jun 11 13:08:47 1999
- Orig file:
v2.2.9/linux/drivers/char/synclink.c
- Orig date:
Mon Mar 29 11:09:11 1999
diff -u --recursive --new-file v2.2.9/linux/drivers/char/synclink.c linux/drivers/char/synclink.c
@@ -1,6 +1,8 @@
/*
* linux/drivers/char/synclink.c
*
+ * ==FILEDATE 19990610==
+ *
* Device driver for Microgate SyncLink ISA and PCI
* high speed multiprotocol serial adapters.
*
@@ -43,14 +45,15 @@
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-
+
#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
#define BREAKPOINT() asm(" int $3");
#define MAX_ISA_DEVICES 10
-#include <linux/config.h>
+#include <linux/config.h>
#include <linux/module.h>
+#include <linux/version.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
@@ -68,7 +71,7 @@
#include <linux/mm.h>
#include <linux/malloc.h>
-#if LINUX_VERSION_CODE >= VERSION(2,1,0)
+#if LINUX_VERSION_CODE >= VERSION(2,1,0)
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <asm/serial.h>
@@ -209,8 +212,21 @@
} BH_EVENT, *BH_QUEUE; /* Queue of BH actions to be done. */
#define MAX_BH_QUEUE_ENTRIES 200
+#define IO_PIN_SHUTDOWN_LIMIT (MAX_BH_QUEUE_ENTRIES/4)
#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+struct _input_signal_events {
+ int ri_up;
+ int ri_down;
+ int dsr_up;
+ int dsr_down;
+ int dcd_up;
+ int dcd_down;
+ int cts_up;
+ int cts_down;
+};
+
/*
* Device instance data structure
*/
@@ -266,6 +282,11 @@
int bh_running; /* Protection from multiple */
int isr_overflow;
int bh_requested;
+
+ int dcd_chkcount; /* check counts to prevent */
+ int cts_chkcount; /* too many IRQs if a signal */
+ int dsr_chkcount; /* is floating */
+ int ri_chkcount;
char *buffer_list; /* virtual address of Rx & Tx buffer lists */
unsigned long buffer_list_phys;
@@ -327,6 +348,11 @@
char flag_buf[HDLC_MAX_FRAME_SIZE];
char char_buf[HDLC_MAX_FRAME_SIZE];
BOOLEAN drop_rts_on_tx_done;
+
+ BOOLEAN loopmode_insert_requested;
+ BOOLEAN loopmode_send_done_requested;
+
+ struct _input_signal_events input_signal_events;
};
#define MGSL_MAGIC 0x5401
@@ -712,6 +738,13 @@
void mgsl_tx_timeout(unsigned long context);
+
+void usc_loopmode_cancel_transmit( struct mgsl_struct * info );
+void usc_loopmode_insert_request( struct mgsl_struct * info );
+int usc_loopmode_active( struct mgsl_struct * info);
+void usc_loopmode_send_done( struct mgsl_struct * info );
+int usc_loopmode_send_active( struct mgsl_struct * info );
+
/*
* Defines a BUS descriptor value for the PCI adapter
* local bus address ranges.
@@ -820,7 +853,8 @@
static int mgsl_txenable(struct mgsl_struct * info, int enable);
static int mgsl_txabort(struct mgsl_struct * info);
static int mgsl_rxenable(struct mgsl_struct * info, int enable);
-static int mgsl_wait_event(struct mgsl_struct * info, int mask);
+static int mgsl_wait_event(struct mgsl_struct * info, int * mask);
+static int mgsl_loopmode_send_done( struct mgsl_struct * info );
#define jiffies_from_ms(a) ((((a) * HZ)/1000)+1)
@@ -865,7 +899,7 @@
#endif
static char *driver_name = "SyncLink serial driver";
-static char *driver_version = "1.00";
+static char *driver_version = "1.7";
static struct tty_driver serial_driver, callout_driver;
static int serial_refcount;
@@ -1001,6 +1035,7 @@
/* As a safety measure, mark the end of the chain with a NULL */
info->free_bh_queue_tail->link = NULL;
+ info->isr_overflow=0;
} /* end of mgsl_format_bh_queue() */
@@ -1092,6 +1127,14 @@
spin_unlock_irqrestore(&info->irq_spinlock,flags);
return 1;
}
+
+ if ( info->isr_overflow ) {
+ if (debug_level >= DEBUG_LEVEL_BH)
+ printk("ISR overflow cleared.\n");
+ info->isr_overflow=0;
+ usc_EnableMasterIrqBit(info);
+ usc_EnableDmaInterrupts(info,DICR_MASTER);
+ }
/* Mark BH routine as complete */
info->bh_running = 0;
@@ -1155,10 +1198,6 @@
}
}
- if ( info->isr_overflow ) {
- printk("ISR overflow detected.\n");
- }
-
if ( debug_level >= DEBUG_LEVEL_BH )
printk( "%s(%d):mgsl_bh_handler(%s) exit\n",
__FILE__,__LINE__,info->device_name);
@@ -1199,6 +1238,7 @@
void mgsl_bh_transmit_data( struct mgsl_struct *info, unsigned short Datacount )
{
struct tty_struct *tty = info->tty;
+ unsigned long flags;
if ( debug_level >= DEBUG_LEVEL_BH )
printk( "%s(%d):mgsl_bh_transmit_data() entry on %s\n",
@@ -1215,7 +1255,15 @@
}
wake_up_interruptible(&tty->write_wait);
}
-
+
+ /* if transmitter idle and loopmode_send_done_requested
+ * then start echoing RxD to TxD
+ */
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ if ( !info->tx_active && info->loopmode_send_done_requested )
+ usc_loopmode_send_done( info );
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
} /* End Of mgsl_bh_transmit_data() */
/* mgsl_bh_status_handler()
@@ -1240,6 +1288,23 @@
printk( "%s(%d):mgsl_bh_status_handler() entry on %s\n",
__FILE__,__LINE__,info->device_name);
+ if (status & MISCSTATUS_RI_LATCHED) {
+ if (info->ri_chkcount)
+ (info->ri_chkcount)--;
+ }
+ if (status & MISCSTATUS_DSR_LATCHED) {
+ if (info->dsr_chkcount)
+ (info->dsr_chkcount)--;
+ }
+ if (status & MISCSTATUS_DCD_LATCHED) {
+ if (info->dcd_chkcount)
+ (info->dcd_chkcount)--;
+ }
+ if (status & MISCSTATUS_CTS_LATCHED) {
+ if (info->cts_chkcount)
+ (info->cts_chkcount)--;
+ }
+
} /* End Of mgsl_bh_status_handler() */
/* mgsl_isr_receive_status()
@@ -1259,8 +1324,21 @@
printk("%s(%d):mgsl_isr_receive_status status=%04X\n",
__FILE__,__LINE__,status);
- usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
- usc_UnlatchRxstatusBits( info, status );
+ if ( (status & RXSTATUS_ABORT_RECEIVED) &&
+ info->loopmode_insert_requested &&
+ usc_loopmode_active(info) )
+ {
+ ++info->icount.rxabort;
+ info->loopmode_insert_requested = FALSE;
+
+ /* clear CMR:13 to start echoing RxD to TxD */
+ info->cmr_value &= ~BIT13;
+ usc_OutReg(info, CMR, info->cmr_value);
+
+ /* disable received abort irq (no longer required) */
+ usc_OutReg(info, RICR,
+ (usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED));
+ }
if (status & (RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED)) {
if (status & RXSTATUS_EXITED_HUNT)
@@ -1278,6 +1356,9 @@
usc_RTCmd( info, RTCmd_PurgeRxFifo );
}
+ usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
+ usc_UnlatchRxstatusBits( info, status );
+
} /* end of mgsl_isr_receive_status() */
/* mgsl_isr_transmit_status()
@@ -1300,7 +1381,7 @@
usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
usc_UnlatchTxstatusBits( info, status );
-
+
if ( status & TXSTATUS_EOF_SENT )
info->icount.txok++;
else if ( status & TXSTATUS_UNDERRUN )
@@ -1356,12 +1437,32 @@
MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
icount = &info->icount;
/* update input line counters */
- if (status & MISCSTATUS_RI_LATCHED)
+ if (status & MISCSTATUS_RI_LATCHED) {
+ if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
+ usc_DisablestatusIrqs(info,SICR_RI);
icount->rng++;
- if (status & MISCSTATUS_DSR_LATCHED)
+ if ( status & MISCSTATUS_RI )
+ info->input_signal_events.ri_up++;
+ else
+ info->input_signal_events.ri_down++;
+ }
+ if (status & MISCSTATUS_DSR_LATCHED) {
+ if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
+ usc_DisablestatusIrqs(info,SICR_DSR);
icount->dsr++;
+ if ( status & MISCSTATUS_DSR )
+ info->input_signal_events.dsr_up++;
+ else
+ info->input_signal_events.dsr_down++;
+ }
if (status & MISCSTATUS_DCD_LATCHED) {
+ if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
+ usc_DisablestatusIrqs(info,SICR_DCD);
icount->dcd++;
+ if ( status & MISCSTATUS_DCD )
+ info->input_signal_events.dcd_up++;
+ else
+ info->input_signal_events.dcd_down++;
#ifdef CONFIG_HARD_PPS
if ((info->flags & ASYNC_HARDPPS_CD) &&
(status & MISCSTATUS_DCD_LATCHED))
@@ -1369,7 +1470,15 @@
#endif
}
if (status & MISCSTATUS_CTS_LATCHED)
+ {
+ if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
+ usc_DisablestatusIrqs(info,SICR_CTS);
icount->cts++;
+ if ( status & MISCSTATUS_CTS )
+ info->input_signal_events.cts_up++;
+ else
+ info->input_signal_events.cts_down++;
+ }
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
@@ -1411,6 +1520,8 @@
}
}
+ mgsl_bh_queue_put(info, BH_TYPE_STATUS, status);
+
/* for diagnostics set IRQ flag */
if ( status & MISCSTATUS_TXC_LATCHED ){
usc_OutReg( info, SICR,
@@ -1642,8 +1753,10 @@
/* Post a receive event for BH processing. */
mgsl_bh_queue_put( info, BH_TYPE_RECEIVE_DMA, status );
- if ( status & BIT3 )
+ if ( status & BIT3 ) {
info->rx_overflow = 1;
+ info->icount.buf_overrun++;
+ }
} /* end of mgsl_isr_receive_dma() */
@@ -1696,9 +1809,9 @@
if ( info->isr_overflow ) {
printk(KERN_ERR"%s(%d):%s isr overflow irq=%d\n",
__FILE__,__LINE__,info->device_name, irq);
- /* Interrupt overflow. Reset adapter and exit. */
-// UscReset(info);
-// break;
+ usc_DisableMasterIrqBit(info);
+ usc_DisableDmaInterrupts(info,DICR_MASTER);
+ break;
}
}
@@ -1980,6 +2093,11 @@
usc_set_async_mode(info);
usc_set_serial_signals(info);
+
+ info->dcd_chkcount = 0;
+ info->cts_chkcount = 0;
+ info->ri_chkcount = 0;
+ info->dsr_chkcount = 0;
/* enable modem signal IRQs and read initial signal states */
usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI);
@@ -2112,16 +2230,27 @@
if ( info->params.mode == MGSL_MODE_HDLC ) {
/* operating in synchronous (frame oriented) mode */
-
+
if (info->tx_active) {
ret = 0; goto cleanup;
}
-
+
+ /* if operating in HDLC LoopMode and the adapter */
+ /* has yet to be inserted into the loop, we can't */
+ /* transmit */
+
+ if ( (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) &&
+ !usc_loopmode_active(info) )
+ {
+ ret = 0;
+ goto cleanup;
+ }
+
if ( info->xmit_cnt ) {
/* Send accumulated from send_char() calls */
/* as frame and wait before accepting more data. */
ret = 0;
-
+
/* copy data from circular xmit_buf to */
/* transmit DMA buffer. */
mgsl_load_tx_dma_buffer(info,
@@ -2578,8 +2707,19 @@
spin_lock_irqsave(&info->irq_spinlock,flags);
if ( enable ) {
- if ( !info->tx_enabled )
+ if ( !info->tx_enabled ) {
+
usc_start_transmitter(info);
+ /*--------------------------------------------------
+ * if HDLC/SDLC Loop mode, attempt to insert the
+ * station in the 'loop' by setting CMR:13. Upon
+ * receipt of the next GoAhead (RxAbort) sequence,
+ * the OnLoop indicator (CCSR:7) should go active
+ * to indicate that we are on the loop
+ *--------------------------------------------------*/
+ if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
+ usc_loopmode_insert_request( info );
+ }
} else {
if ( info->tx_enabled )
usc_stop_transmitter(info);
@@ -2604,7 +2744,12 @@
spin_lock_irqsave(&info->irq_spinlock,flags);
if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC )
- usc_TCmd(info,TCmd_SendAbort);
+ {
+ if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
+ usc_loopmode_cancel_transmit( info );
+ else
+ usc_TCmd(info,TCmd_SendAbort);
+ }
spin_unlock_irqrestore(&info->irq_spinlock,flags);
return 0;
@@ -2640,25 +2785,39 @@
/* mgsl_wait_event() wait for specified event to occur
*
* Arguments: info pointer to device instance data
- * mask bitmask of events to wait for
- * Return Value: bit mask of triggering event, otherwise error code
+ * mask pointer to bitmask of events to wait for
+ * Return Value: 0 if successful and bit mask updated with
+ * of events triggerred,
+ * otherwise error code
*/
-static int mgsl_wait_event(struct mgsl_struct * info, int mask)
+static int mgsl_wait_event(struct mgsl_struct * info, int * mask_ptr)
{
unsigned long flags;
int s;
int rc=0;
u16 regval;
struct mgsl_icount cprev, cnow;
+ int events = 0;
+ int mask;
+ struct _input_signal_events signal_events_prev, signal_events_now;
+
+ COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
+ if (rc) {
+ return -EFAULT;
+ }
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_wait_event(%s,%d)\n", __FILE__,__LINE__,
info->device_name, mask);
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
-
+
+ usc_get_serial_signals(info);
+ s = info->serial_signals;
+
/* note the counters on entry */
cprev = info->icount;
+ signal_events_prev = info->input_signal_events;
if (mask & MgslEvent_ExitHuntMode) {
/* enable exit hunt mode IRQ */
@@ -2676,7 +2835,22 @@
spin_unlock_irqrestore(&info->irq_spinlock,flags);
- while(!rc) {
+ /* Determine if any user requested events for input signals is currently TRUE */
+
+ events |= (mask & ((s & SerialSignal_DSR) ?
+ MgslEvent_DsrActive:MgslEvent_DsrInactive));
+
+ events |= (mask & ((s & SerialSignal_DCD) ?
+ MgslEvent_DcdActive:MgslEvent_DcdInactive));
+
+ events |= (mask & ((s & SerialSignal_CTS) ?
+ MgslEvent_CtsActive:MgslEvent_CtsInactive));
+
+ events |= (mask & ((s & SerialSignal_RI) ?
+ MgslEvent_RiActive:MgslEvent_RiInactive));
+
+
+ while(!events) {
/* sleep until event occurs */
interruptible_sleep_on(&info->event_wait_q);
@@ -2687,44 +2861,57 @@
}
spin_lock_irqsave(&info->irq_spinlock,flags);
+
/* get icount and serial signal states */
cnow = info->icount;
- s = info->serial_signals;
+ signal_events_now = info->input_signal_events;
spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ if (signal_events_now.dsr_up != signal_events_prev.dsr_up &&
+ mask & MgslEvent_DsrActive )
+ events |= MgslEvent_DsrActive;
+
+ if (signal_events_now.dsr_down != signal_events_prev.dsr_down &&
+ mask & MgslEvent_DsrInactive )
+ events |= MgslEvent_DsrInactive;
+
+ if (signal_events_now.dcd_up != signal_events_prev.dcd_up &&
+ mask & MgslEvent_DcdActive )
+ events |= MgslEvent_DcdActive;
+
+ if (signal_events_now.dcd_down != signal_events_prev.dcd_down &&
+ mask & MgslEvent_DcdInactive )
+ events |= MgslEvent_DcdInactive;
+
+ if (signal_events_now.cts_up != signal_events_prev.cts_up &&
+ mask & MgslEvent_CtsActive )
+ events |= MgslEvent_CtsActive;
+
+ if (signal_events_now.cts_down != signal_events_prev.cts_down &&
+ mask & MgslEvent_CtsInactive )
+ events |= MgslEvent_CtsInactive;
+
+ if (signal_events_now.ri_up != signal_events_prev.ri_up &&
+ mask & MgslEvent_RiActive )
+ events |= MgslEvent_RiActive;
+
+ if (signal_events_now.ri_down != signal_events_prev.ri_down &&
+ mask & MgslEvent_RiInactive )
+ events |= MgslEvent_RiInactive;
- rc = 0;
-
- if (cnow.dsr != cprev.dsr)
- rc |= (mask & ((s & SerialSignal_DSR) ?
- MgslEvent_DsrActive:MgslEvent_DsrInactive));
-
- if (cnow.dcd != cprev.dcd)
- rc |= (mask & ((s & SerialSignal_DCD) ?
- MgslEvent_DcdActive:MgslEvent_DcdInactive));
-
- if (cnow.cts != cprev.cts)
- rc |= (mask & ((s & SerialSignal_CTS) ?
- MgslEvent_CtsActive:MgslEvent_CtsInactive));
-
- if (cnow.rng != cprev.rng)
- rc |= (mask & ((s & SerialSignal_RI) ?
- MgslEvent_RiActive:MgslEvent_RiInactive));
-
if (cnow.exithunt != cprev.exithunt)
- rc |= (mask & MgslEvent_ExitHuntMode);
-
+ events |= (mask & MgslEvent_ExitHuntMode);
+
if (cnow.rxidle != cprev.rxidle)
- rc |= (mask & MgslEvent_ExitHuntMode);
-
- if (!rc)
- rc = -EIO; /* no change => error */
-
+ events |= (mask & MgslEvent_IdleReceived);
+
cprev = cnow;
+ signal_events_prev = signal_events_now;
}
if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
spin_lock_irqsave(&info->irq_spinlock,flags);
- if (!info->event_wait_q) {
+ if (!waitqueue_active(&info->event_wait_q)) {
/* disable enable exit hunt mode/idle rcvd IRQs */
regval = usc_InReg(info,RICR);
usc_OutReg(info, RICR, regval &
@@ -2732,7 +2919,10 @@
}
spin_unlock_irqrestore(&info->irq_spinlock,flags);
}
-
+
+ if ( rc == 0 )
+ PUT_USER(rc, events, mask_ptr);
+
return rc;
} /* end of mgsl_wait_event() */
@@ -2772,7 +2962,7 @@
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_get_modem_info %s value=%08X\n",
- __FILE__,__LINE__, info->device_name, *value );
+ __FILE__,__LINE__, info->device_name, result );
PUT_USER(err,result,value);
return err;
@@ -2928,7 +3118,9 @@
case MGSL_IOCGSTATS:
return mgsl_get_stats(info,(struct mgsl_icount*)arg);
case MGSL_IOCWAITEVENT:
- return mgsl_wait_event(info,(int)arg);
+ return mgsl_wait_event(info,(int*)arg);
+ case MGSL_IOCLOOPTXDONE:
+ return mgsl_loopmode_send_done(info);
case MGSL_IOCCLRMODCOUNT:
while(MOD_IN_USE)
MOD_DEC_USE_COUNT;
@@ -3626,11 +3818,6 @@
}
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-#if 0 && LINUX_VERSION_CODE >= VERSION(2,1,0)
- ret += sprintf(buf+ret, "irq_spinlock=%08X\n",
- info->irq_spinlock.lock );
-#endif
-
return ret;
} /* end of line_info() */
@@ -4223,6 +4410,18 @@
if ( PCIBIOS_SUCCESSFUL == pcibios_find_device(
MICROGATE_VENDOR_ID, SYNCLINK_DEVICE_ID, i, &bus, &func) ) {
+#if LINUX_VERSION_CODE >= VERSION(2,1,0)
+ struct pci_dev *pdev = pci_find_slot(bus,func);
+ irq_line = pdev->irq;
+#else
+ if (pcibios_read_config_byte(bus,func,
+ PCI_INTERRUPT_LINE,&irq_line) ) {
+ printk( "%s(%d):USC I/O addr not set.\n",
+ __FILE__,__LINE__);
+ continue;
+ }
+#endif
+
if (pcibios_read_config_dword(bus,func,
PCI_BASE_ADDRESS_3,&shared_mem_base) ) {
printk( "%s(%d):Shared mem addr not set.\n",
@@ -4244,13 +4443,6 @@
continue;
}
- if (pcibios_read_config_byte(bus,func,
- PCI_INTERRUPT_LINE,&irq_line) ) {
- printk( "%s(%d):USC I/O addr not set.\n",
- __FILE__,__LINE__);
- continue;
- }
-
info = mgsl_allocate_device();
if ( !info ) {
/* error allocating device instance data */
@@ -4667,29 +4859,53 @@
{
u16 RegValue;
- /* Channel mode Register (CMR)
- *
- * <15..14> 00 Tx Sub modes, Underrun Action
- * <13> 0 1 = Send Preamble before opening flag
- * <12> 0 1 = Consecutive Idles share common 0
- * <11..8> 0110 Transmitter mode = HDLC/SDLC
- * <7..4> 0000 Rx Sub modes, addr/ctrl field handling
- * <3..0> 0110 Receiver mode = HDLC/SDLC
- *
- * 0000 0110 0000 0110 = 0x0606
- */
+ if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
+ {
+ /*
+ ** Channel Mode Register (CMR)
+ **
+ ** <15..14> 10 Tx Sub Modes, Send Flag on Underrun
+ ** <13> 0 0 = Transmit Disabled (initially)
+ ** <12> 0 1 = Consecutive Idles share common 0
+ ** <11..8> 1110 Transmitter Mode = HDLC/SDLC Loop
+ ** <7..4> 0000 Rx Sub Modes, addr/ctrl field handling
+ ** <3..0> 0110 Receiver Mode = HDLC/SDLC
+ **
+ ** 1000 1110 0000 0110 = 0x8e06
+ */
+ RegValue = 0x8e06;
+
+ /*--------------------------------------------------
+ * ignore user options for UnderRun Actions and
+ * preambles
+ *--------------------------------------------------*/
+ }
+ else
+ {
+ /* Channel mode Register (CMR)
+ *
+ * <15..14> 00 Tx Sub modes, Underrun Action
+ * <13> 0 1 = Send Preamble before opening flag
+ * <12> 0 1 = Consecutive Idles share common 0
+ * <11..8> 0110 Transmitter mode = HDLC/SDLC
+ * <7..4> 0000 Rx Sub modes, addr/ctrl field handling
+ * <3..0> 0110 Receiver mode = HDLC/SDLC
+ *
+ * 0000 0110 0000 0110 = 0x0606
+ */
- RegValue = 0x0606;
+ RegValue = 0x0606;
- if ( info->params.flags & HDLC_FLAG_UNDERRUN_ABORT15 )
- RegValue |= BIT14;
- else if ( info->params.flags & HDLC_FLAG_UNDERRUN_FLAG )
- RegValue |= BIT15;
- else if ( info->params.flags & HDLC_FLAG_UNDERRUN_CRC )
- RegValue |= BIT15 + BIT14;
+ if ( info->params.flags & HDLC_FLAG_UNDERRUN_ABORT15 )
+ RegValue |= BIT14;
+ else if ( info->params.flags & HDLC_FLAG_UNDERRUN_FLAG )
+ RegValue |= BIT15;
+ else if ( info->params.flags & HDLC_FLAG_UNDERRUN_CRC )
+ RegValue |= BIT15 + BIT14;
- if ( info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE )
- RegValue |= BIT13;
+ if ( info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE )
+ RegValue |= BIT13;
+ }
if ( info->params.flags & HDLC_FLAG_SHARE_ZERO )
RegValue |= BIT12;
@@ -4858,6 +5074,8 @@
RegValue |= 0x0003; /* RxCLK from DPLL */
else if ( info->params.flags & HDLC_FLAG_RXC_BRG )
RegValue |= 0x0004; /* RxCLK from BRG0 */
+ else if ( info->params.flags & HDLC_FLAG_RXC_TXCPIN)
+ RegValue |= 0x0006; /* RxCLK from TXC Input */
else
RegValue |= 0x0007; /* RxCLK from Port1 */
@@ -4865,6 +5083,8 @@
RegValue |= 0x0018; /* TxCLK from DPLL */
else if ( info->params.flags & HDLC_FLAG_TXC_BRG )
RegValue |= 0x0020; /* TxCLK from BRG0 */
+ else if ( info->params.flags & HDLC_FLAG_TXC_RXCPIN)
+ RegValue |= 0x0038; /* RxCLK from TXC Input */
else
RegValue |= 0x0030; /* TxCLK from Port0 */
@@ -4918,10 +5138,24 @@
/* of rounding up and then subtracting 1 we just don't subtract */
/* the one in this case. */
- Tc = (u16)((XtalSpeed/DpllDivisor)/info->params.clock_speed);
- if ( !((((XtalSpeed/DpllDivisor) % info->params.clock_speed) * 2)
- / info->params.clock_speed) )
- Tc--;
+ /*--------------------------------------------------
+ * ejz: for DPLL mode, application should use the
+ * same clock speed as the partner system, even
+ * though clocking is derived from the input RxData.
+ * In case the user uses a 0 for the clock speed,
+ * default to 0xffffffff and don't try to divide by
+ * zero
+ *--------------------------------------------------*/
+ if ( info->params.clock_speed )
+ {
+ Tc = (u16)((XtalSpeed/DpllDivisor)/info->params.clock_speed);
+ if ( !((((XtalSpeed/DpllDivisor) % info->params.clock_speed) * 2)
+ / info->params.clock_speed) )
+ Tc--;
+ }
+ else
+ Tc = -1;
+
/* Write 16-bit Time Constant for BRG1 */
usc_OutReg( info, TC1R, Tc );
@@ -6324,6 +6558,13 @@
if ( debug_level >= DEBUG_LEVEL_DATA )
mgsl_trace_block(info,Buffer,BufferSize,1);
+ if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
+ /* set CMR:13 to start transmit when
+ * next GoAhead (abort) is received
+ */
+ info->cmr_value |= BIT13;
+ }
+
/* Setup the status and RCC (Frame Size) fields of the 1st */
/* buffer entry in the transmit DMA buffer list. */
@@ -6377,7 +6618,7 @@
unsigned int i;
BOOLEAN rc = TRUE;
unsigned long flags;
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
usc_reset(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
@@ -6467,7 +6708,7 @@
usc_reset(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
- if ( !info->irq_occurred )
+ if ( !info->irq_occurred )
return FALSE;
else
return TRUE;
@@ -6495,7 +6736,7 @@
volatile unsigned long EndTime;
unsigned long flags;
MGSL_PARAMS tmp_params;
-
+
/* save current port options */
memcpy(&tmp_params,&info->params,sizeof(MGSL_PARAMS));
/* load default port options */
@@ -6653,7 +6894,7 @@
/**********************************/
/* WAIT FOR TRANSMIT FIFO TO FILL */
/**********************************/
-
+
/* Wait 100ms */
EndTime = jiffies + jiffies_from_ms(100);
@@ -6720,7 +6961,7 @@
if ( rc == TRUE ){
/* CHECK FOR TRANSMIT ERRORS */
- if ( status & (BIT5 + BIT1) )
+ if ( status & (BIT5 + BIT1) )
rc = FALSE;
}
@@ -6977,13 +7218,90 @@
if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
info->icount.txtimeout++;
}
-
spin_lock_irqsave(&info->irq_spinlock,flags);
info->tx_active = 0;
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+
+ if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
+ usc_loopmode_cancel_transmit( info );
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);
mgsl_bh_transmit_data(info,0);
} /* end of mgsl_tx_timeout() */
+
+/* signal that there are no more frames to send, so that
+ * line is 'released' by echoing RxD to TxD when current
+ * transmission is complete (or immediately if no tx in progress).
+ */
+static int mgsl_loopmode_send_done( struct mgsl_struct * info )
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
+ if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
+ if (info->tx_active)
+ info->loopmode_send_done_requested = TRUE;
+ else
+ usc_loopmode_send_done(info);
+ }
+ spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+ return 0;
+}
+
+/* release the line by echoing RxD to TxD
+ * upon completion of a transmit frame
+ */
+void usc_loopmode_send_done( struct mgsl_struct * info )
+{
+ info->loopmode_send_done_requested = FALSE;
+ /* clear CMR:13 to 0 to start echoing RxData to TxData */
+ info->cmr_value &= ~BIT13;
+ usc_OutReg(info, CMR, info->cmr_value);
+}
+
+/* abort a transmit in progress while in HDLC LoopMode
+ */
+void usc_loopmode_cancel_transmit( struct mgsl_struct * info )
+{
+ /* reset tx dma channel and purge TxFifo */
+ usc_RTCmd( info, RTCmd_PurgeTxFifo );
+ usc_DmaCmd( info, DmaCmd_ResetTxChannel );
+ usc_loopmode_send_done( info );
+}
+
+/* for HDLC/SDLC LoopMode, setting CMR:13 after the transmitter is enabled
+ * is an Insert Into Loop action. Upon receipt of a GoAhead sequence (RxAbort)
+ * we must clear CMR:13 to begin repeating TxData to RxData
+ */
+void usc_loopmode_insert_request( struct mgsl_struct * info )
+{
+ info->loopmode_insert_requested = TRUE;
+
+ /* enable RxAbort irq. On next RxAbort, clear CMR:13 to
+ * begin repeating TxData on RxData (complete insertion)
+ */
+ usc_OutReg( info, RICR,
+ (usc_InReg( info, RICR ) | RXSTATUS_ABORT_RECEIVED ) );
+
+ /* set CMR:13 to insert into loop on next GoAhead (RxAbort) */
+ info->cmr_value |= BIT13;
+ usc_OutReg(info, CMR, info->cmr_value);
+}
+
+/* return 1 if station is inserted into the loop, otherwise 0
+ */
+int usc_loopmode_active( struct mgsl_struct * info)
+{
+ return usc_InReg( info, CCSR ) & BIT7 ? 1 : 0 ;
+}
+
+/* return 1 if USC is in loop send mode, otherwise 0
+ */
+int usc_loopmode_send_active( struct mgsl_struct * info )
+{
+ return usc_InReg( info, CCSR ) & BIT6 ? 1 : 0 ;
+}
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)