patch-2.0.35 linux/drivers/block/paride/frpw.c

• Lines: 311
• Date: Mon Jul 13 13:47:28 1998
• Orig file: v2.0.34/linux/drivers/block/paride/frpw.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.0.34/linux/drivers/block/paride/frpw.c linux/drivers/block/paride/frpw.c
@@ -0,0 +1,310 @@
+/* 
+	frpw.c	(c) 1996-8  Grant R. Guenther <grant@torque.net>
+		            Under the terms of the GNU public license
+
+	frpw.c is a low-level protocol driver for the Freecom "Power"
+	parallel port IDE adapter.
+	
+*/
+
+/* Changes:
+
+        1.01    GRG 1998.05.06 init_proto, release_proto
+			       fix chip detect
+			       added EPP-16 and EPP-32
+
+*/
+
+#define	FRPW_VERSION	"1.01" 
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define cec4		w2(0xc);w2(0xe);w2(0xe);w2(0xc);w2(4);w2(4);w2(4);
+#define j44(l,h)	(((l>>4)&0x0f)|(h&0xf0))
+
+/* cont = 0 - access the IDE register file 
+   cont = 1 - access the IDE command set 
+*/
+
+static int  cont_map[2] = { 0x08, 0x10 };
+
+static int frpw_read_regr( PIA *pi, int cont, int regr )
+
+{	int	h,l,r;
+
+	r = regr + cont_map[cont];
+
+	w2(4);
+	w0(r); cec4;
+	w2(6); l = r1();
+	w2(4); h = r1();
+	w2(4); 
+
+	return j44(l,h);
+
+}
+
+static void frpw_write_regr( PIA *pi, int cont, int regr, int val)
+
+{	int r;
+
+        r = regr + cont_map[cont];
+
+	w2(4); w0(r); cec4; 
+	w0(val);
+	w2(5);w2(7);w2(5);w2(4);
+}
+
+static void frpw_read_block_int( PIA *pi, char * buf, int count, int regr )
+
+{       int     h, l, k, ph;
+
+        switch(pi->mode) {
+
+        case 0: w2(4); w0(regr); cec4;
+                for (k=0;k<count;k++) {
+                        w2(6); l = r1();
+                        w2(4); h = r1();
+                        buf[k] = j44(l,h);
+                }
+                w2(4);
+                break;
+
+        case 1: ph = 2;
+                w2(4); w0(regr + 0xc0); cec4;
+                w0(0xff);
+                for (k=0;k<count;k++) {
+                        w2(0xa4 + ph); 
+                        buf[k] = r0();
+                        ph = 2 - ph;
+                } 
+                w2(0xac); w2(0xa4); w2(4);
+                break;
+
+        case 2: w2(4); w0(regr + 0x80); cec4;
+                for (k=0;k<count;k++) buf[k] = r4();
+                w2(0xac); w2(0xa4);
+                w2(4);
+                break;
+
+	case 3: w2(4); w0(regr + 0x80); cec4;
+		for (k=0;k<count-2;k++) buf[k] = r4();
+		w2(0xac); w2(0xa4);
+		buf[count-2] = r4();
+		buf[count-1] = r4();
+		w2(4);
+		break;
+
+	case 4: w2(4); w0(regr + 0x80); cec4;
+                for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
+                w2(0xac); w2(0xa4);
+                buf[count-2] = r4();
+                buf[count-1] = r4();
+                w2(4);
+                break;
+
+	case 5: w2(4); w0(regr + 0x80); cec4;
+                for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
+                buf[count-4] = r4();
+                buf[count-3] = r4();
+                w2(0xac); w2(0xa4);
+                buf[count-2] = r4();
+                buf[count-1] = r4();
+                w2(4);
+                break;
+
+        }
+}
+
+static void frpw_read_block( PIA *pi, char * buf, int count)
+
+{	frpw_read_block_int(pi,buf,count,0x08);
+}
+
+static void frpw_write_block( PIA *pi, char * buf, int count )
+ 
+{	int	k;
+
+	switch(pi->mode) {
+
+	case 0:
+	case 1:
+	case 2: w2(4); w0(8); cec4; w2(5);
+        	for (k=0;k<count;k++) {
+			w0(buf[k]);
+			w2(7);w2(5);
+		}
+		w2(4);
+		break;
+
+	case 3: w2(4); w0(0xc8); cec4; w2(5);
+		for (k=0;k<count;k++) w4(buf[k]);
+		w2(4);
+		break;
+
+        case 4: w2(4); w0(0xc8); cec4; w2(5);
+                for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
+                w2(4);
+                break;
+
+        case 5: w2(4); w0(0xc8); cec4; w2(5);
+                for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
+                w2(4);
+                break;
+	}
+}
+
+static void frpw_connect ( PIA *pi  )
+
+{       pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+	w2(4);
+}
+
+static void frpw_disconnect ( PIA *pi )
+
+{       w2(4); w0(0x20); cec4;
+	w0(pi->saved_r0);
+        w2(pi->saved_r2);
+} 
+
+/* Stub logic to see if PNP string is available - used to distinguish
+   between the Xilinx and ASIC implementations of the Freecom adapter.
+*/
+
+static int frpw_test_pnp ( PIA *pi )
+
+/*  returns chip_type:   0 = Xilinx, 1 = ASIC   */
+
+{	int olddelay, a, b;
+
+	olddelay = pi->delay;
+	pi->delay = 10;
+
+	pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+	
+	w2(4); w0(4); w2(6); w2(7);
+	a = r1() & 0xff; w2(4); b = r1() & 0xff;
+	w2(0xc); w2(0xe); w2(4);
+
+	pi->delay = olddelay;
+        w0(pi->saved_r0);
+        w2(pi->saved_r2);
+
+	return ((~a&0x40) && (b&0x40));
+} 
+
+/* We use the pi->private to remember the result of the PNP test.
+   To make this work, private = port*2 + chip.  Yes, I know it's
+   a hack :-(
+*/
+
+static int frpw_test_proto( PIA *pi, char * scratch, int verbose )
+
+{       int     j, k, r;
+	int	e[2] = {0,0};
+
+	if ((pi->private>>1) != pi->port)
+	   pi->private = frpw_test_pnp(pi) + 2*pi->port;
+
+	if (((pi->private%2) == 0) && (pi->mode > 2)) {
+	   if (verbose) 
+		printk("%s: frpw: Xilinx does not support mode %d\n",
+			pi->device, pi->mode);
+	   return 1;
+	}
+
+	if (((pi->private%2) == 1) && (pi->mode == 2)) {
+	   if (verbose)
+		printk("%s: frpw: ASIC does not support mode 2\n",
+			pi->device);
+	   return 1;
+	}
+
+	frpw_connect(pi);
+	for (j=0;j<2;j++) {
+                frpw_write_regr(pi,0,6,0xa0+j*0x10);
+                for (k=0;k<256;k++) {
+                        frpw_write_regr(pi,0,2,k^0xaa);
+                        frpw_write_regr(pi,0,3,k^0x55);
+                        if (frpw_read_regr(pi,0,2) != (k^0xaa)) e[j]++;
+                        }
+                }
+	frpw_disconnect(pi);
+
+	frpw_connect(pi);
+        frpw_read_block_int(pi,scratch,512,0x10);
+        r = 0;
+        for (k=0;k<128;k++) if (scratch[k] != k) r++;
+	frpw_disconnect(pi);
+
+        if (verbose)  {
+            printk("%s: frpw: port 0x%x, chip %d, mode %d, test=(%d,%d,%d)\n",
+                   pi->device,pi->port,(pi->private%2),pi->mode,e[0],e[1],r);
+        }
+
+        return (r || (e[0] && e[1]));
+}
+
+
+static void frpw_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       char    *mode_string[6] = {"4-bit","8-bit","EPP",
+				   "EPP-8","EPP-16","EPP-32"};
+
+        printk("%s: frpw %s, Freecom (%s) adapter at 0x%x, ", pi->device,
+		FRPW_VERSION,((pi->private%2) == 0)?"Xilinx":"ASIC",pi->port);
+        printk("mode %d (%s), delay %d\n",pi->mode,
+		mode_string[pi->mode],pi->delay);
+
+}
+
+static void frpw_init_proto( PIA *pi)
+
+{       MOD_INC_USE_COUNT;
+	pi->private = 0;
+}
+
+static void frpw_release_proto( PIA *pi)
+
+{       MOD_DEC_USE_COUNT;
+}
+
+struct pi_protocol frpw = {"frpw",0,6,2,2,1,
+                           frpw_write_regr,
+                           frpw_read_regr,
+                           frpw_write_block,
+                           frpw_read_block,
+                           frpw_connect,
+                           frpw_disconnect,
+                           0,
+                           0,
+                           frpw_test_proto,
+                           frpw_log_adapter,
+                           frpw_init_proto,
+                           frpw_release_proto
+                          };
+
+
+#ifdef MODULE
+
+int     init_module(void)
+
+{       return pi_register( &frpw ) - 1;
+}
+
+void    cleanup_module(void)
+
+{       pi_unregister( &frpw );
+}
+
+#endif
+
+/* end of frpw.c */