patch-1.3.5 linux/drivers/scsi/eata_pio.h

• Lines: 121
• Date: Thu Jun 29 11:19:13 1995
• Orig file: v1.3.4/linux/drivers/scsi/eata_pio.h
• Orig date: Thu Jan 1 02:00:00 1970

diff -u --recursive --new-file v1.3.4/linux/drivers/scsi/eata_pio.h linux/drivers/scsi/eata_pio.h
@@ -0,0 +1,120 @@
+/********************************************************
+* Header file for eata_pio.c Linux EATA-PIO SCSI driver *
+* (c) 1993,94,95 Michael Neuffer                        *
+*********************************************************
+* last change: 95/06/21                                 *
+********************************************************/
+
+
+#ifndef _EATA_PIO_H
+#define _EATA_PIO_H
+
+#include "../block/blk.h"
+#include "scsi.h"
+#include "hosts.h"
+#include <linux/scsicam.h>
+
+#ifndef HOSTS_C
+#include "eata_generic.h"
+
+#define VER_MAJOR 0
+#define VER_MINOR 0
+#define VER_SUB   "1a"
+
+/************************************************************************
+ * Here you can switch parts of the code on and of                      *
+ ************************************************************************/
+
+#define VERBOSE_SETUP                   /* show startup screen of 2001 */
+#define ALLOW_DMA_BOARDS 1
+
+/************************************************************************
+ * Debug options.                                                       * 
+ * Enable DEBUG and whichever options you require.                      *
+ ************************************************************************/
+#define DEBUG_EATA      1   /* Enable debug code.                       */
+#define DPT_DEBUG       0   /* Bobs special                             */
+#define DBG_DELAY       0   /* Build in delays so debug messages can be
+			     * be read before they vanish of the top of
+			     * the screen!
+			     */
+#define DBG_PROBE       0   /* Debug probe routines.                    */
+#define DBG_ISA         0   /* Trace ISA routines                       */ 
+#define DBG_EISA        0   /* Trace EISA routines                      */ 
+#define DBG_PCI         0   /* Trace PCI routines                       */ 
+#define DBG_PIO         0   /* Trace get_config_PIO                     */
+#define DBG_COM         0   /* Trace command call                       */
+#define DBG_QUEUE       0   /* Trace command queueing.                  */
+#define DBG_INTR        0   /* Trace interrupt service routine.         */
+#define DBG_INTR2       0   /* Trace interrupt service routine.         */
+#define DBG_PROC        0   /* Debug proc-fs related statistics         */
+#define DBG_PROC_WRITE  0
+#define DBG_REGISTER    0   /* */
+#define DBG_ABNORM      1   /* Debug abnormal actions (reset, abort)    */
+
+#if DEBUG_EATA 
+#define DBG(x, y)   if ((x)) {y;} 
+#else
+#define DBG(x, y)
+#endif
+
+#endif /* !HOSTS_C */
+
+int eata_pio_detect(Scsi_Host_Template *);
+const char *eata_pio_info(struct Scsi_Host *);
+int eata_pio_command(Scsi_Cmnd *);
+int eata_pio_queue(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+int eata_pio_abort(Scsi_Cmnd *);
+int eata_pio_reset(Scsi_Cmnd *);
+int eata_pio_proc_info(char *, char **, off_t, int, int, int);
+#ifdef MODULE
+int eata_pio_release(struct Scsi_Host *);
+#else
+#define eata_pio_release NULL  
+#endif
+
+extern int generic_proc_info(char *, char **, off_t, int, int, int);
+
+
+#define EATA_PIO {                   \
+	NULL, NULL,                  \
+	eata_pio_proc_info,/* procinfo       */  \
+	"eata_pio",        /* proc dir entry */  \
+	PROC_SCSI_EATA_PIO,/* proc dir inode */  \
+	 "EATA (Extended Attachment) PIO driver",\
+	eata_pio_detect,             \
+	eata_pio_release,            \
+	NULL, NULL,                  \
+	eata_pio_queue,              \
+	eata_pio_abort,              \
+	eata_pio_reset,              \
+	NULL,   /* Slave attach */   \
+	scsicam_bios_param,          \
+	0,      /* Canqueue     */   \
+	0,      /* this_id      */   \
+	0,      /* sg_tablesize */   \
+	0,      /* cmd_per_lun  */   \
+	0,      /* present      */   \
+	1,      /* True if ISA  */   \
+	ENABLE_CLUSTERING }
+
+#endif /* _EATA_PIO_H */
+
+/*
+ * Overrides for Emacs so that we almost follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-indent-level: 4
+ * c-brace-imaginary-offset: 0
+ * c-brace-offset: -4
+ * c-argdecl-indent: 4
+ * c-label-offset: -4
+ * c-continued-statement-offset: 4
+ * c-continued-brace-offset: 0
+ * indent-tabs-mode: nil
+ * tab-width: 4
+ * End:
+ */